ENEXIO Water Technologies GmbH

45 products found

ENEXIO Water Technologies GmbH Products

  • Water Technologies - Cooling Tower Components

    Evaporative cooling towers are still considered the most efficient way of cooling process water at industrial sites all over the world. With economic and ecological factors always an important consideration, construction and operation of wet cooling towers necessitates the use of efficient fills and drift eliminators. As the pioneer of plastic components for cooling tower applications we help our customers to meet their requirements.

  • 2H Plasdek - Counter-Flow Cooling Tower Fills

    2H Plasdek - Counter-Flow Cooling Tower Fills

    Different Types For All Requirements – Available In PVC And PP; From small cooling towers to large cell and natural draught cooling towers: Our PLASdek packings fulfill all requirements. Different types of film fills with large specific surface are highly suited for clean and medium water qualities, whereas for special operation conditions and for strongly polluted water grid structures are the best choice. Ask our experts. They have long time...

  • ENEXIO - 2H Fills and Nozzles for Cross-Flow Cooling Towers

    ENEXIO - 2H Fills and Nozzles for Cross-Flow Cooling Towers

    Optimal heat transfer properties – low pressure drop; Generally, every cross fluted fill could be cut to be installed in a cross-flow cooling tower. Such a fill, however, would not perfectly fit the requirements; we therefore developed a special range of fill for this type of tower (FX12.12 or KSN with a drift eliminator section KSA and air inlet louvre section KSB).

  • ENEXIO - 2H Drift Eliminators

    ENEXIO - 2H Drift Eliminators

    In all different types of cooling towers drift eliminators are used to reduce the loss of water and emissions. Above the water distribution and the cooling fills, a layer of drift eliminators is installed for this purpose. It catches the water drops which are carried away with the air flow and redirects them into the cooling water circuit.

  • 2H Sanipacking - Anti-Legionella Fills & Drift Eliminators

    2H Sanipacking - Anti-Legionella Fills & Drift Eliminators

    Reduction Of Risk Of Legionella Pneumophila In Open Cooling Circuits; Time and again news report about outbreaks of legionella disease in areas near cooling towers. Careful water treatment, together with regular maintenance reduces the risk of bacteria growth in the cooling circuit. But one step more leads to an even higher performance of these measures: the use of anti-legionella components. Years ago we recognized the risk that bacteria in open...

  • ENEXIO - 2H Air Inlet Louvres for Cooling Towers

    ENEXIO - 2H Air Inlet Louvres for Cooling Towers

    Our cellular inlet louvres improve the air flow into the cooling tower. They not only hold back unwanted elements (e.g. leaves) but also prevent water splash-out which can cause icing and loss of expensive water and treatment chemicals. Moreover, an inlet louvre restricts the amount of sunlight entering the cooling tower thereby impeding algae growth. Also the tower‘s clean appearance is maintained.

  • 2H PLASDEK - Model NET 150 / FC20.30 / FC70.34 - Splash and Trickle Fills

    2H PLASDEK - Model NET 150 / FC20.30 / FC70.34 - Splash and Trickle Fills

    Our 2H Splash and Trickle Fills have been specially designed for medium to strongly polluted cooling water, the focus of the development being on a high stability as well as on easy and economical installation. Therefore these fills are built from mechanically joint grids and are easily cleaned. The 2H NET 150 grid packings are high-performance fills which provide an optimized pressure drop. We offer a unique flexibility in measures for this fill...

  • 2H PLASdek / CLEANdek - Model KBC 320 / KVC 319 - Vertical Flow Fills

    2H PLASdek / CLEANdek - Model KBC 320 / KVC 319 - Vertical Flow Fills

    2H PLASdek and CLEANdek vertical flow fills are designed for the use in counterflow cooling towers with poor water quality. With different types in PP, PVC and PPHT and different material thickness, our fills cover all customer requirements. Fill media in flame retardant or anti-bacterial types are available on request. 8earing capacity and weight/m1 depend on sheet thickness. It will be selected according to customer specification in consideration of...

  • ENEXIO - Model 2H SPN 015 / 2H SPN 025 / 2H SPN 020 - Spray Nozzles

    ENEXIO - Model 2H SPN 015 / 2H SPN 025 / 2H SPN 020 - Spray Nozzles

    The axial nozzles are designed as complete cone spiral nozzle consisting of a casing and an insert. Correctly assembled, the nozzles distribute the water with a spray angel of 120°, where the water flow rate depends on the operational pressure. We recommend checking the operation conditions, as nozzle distance and height have to be chosen according to the respective plant requirements.

  • 2H SANIPACKING - Anti-Legionella Fills for Cooling Towers

    2H SANIPACKING - Anti-Legionella Fills for Cooling Towers

    2H SANIPACKING fill media are made of a special antibacterial Polypropylene (PP) compound. The biocide impregnated compount disrupts the metabolic process of unwanted micro-organisms at the cell wall level, thus interrupting their ability to function, grow and reproduce on the 2H SANIPACKING Combined with regular maintenance and correct water treatment in the cooling circuit to prevent the formation of deposits and bacterial growth, 2H SANIPACKING...

  • 2H SANIPACKING - Anti-Legionella Drift Eliminators for Cooling Towers

    2H SANIPACKING - Anti-Legionella Drift Eliminators for Cooling Towers

    2H SANIPACKING drift eliminators are made of a special antibacterial PP compound. The biocide impregnated compound disrupts the metabolic process of unwanted micro organisms at the cell wall level, thus interrupting their ability to function, grow and reproduce on the 2H SANIPACKING. Combined with regular maintenance and correct water treatment in the cooling circuit to prevent the formation of deposits and bacterial growth, 2H SANIPACKING drift...

  • 2H PLASdek - Model KFP 319 / KZC 312 - Cross-Fluted Fills

    2H PLASdek - Model KFP 319 / KZC 312 - Cross-Fluted Fills

    In the manufacturing process we developed the foils are reinforced at the outer edges and in the middle and are therefore very stable. This makes our film fill media extraordinarily resistant to erosion. Our unique welding method connects the single foils with up to 20.000 welding points per m3. This high number of connections results in robust packings with high mechanical load capacity. Bearing capacity|and weight/m3 depend on sheet thickness. It...

  • Water Technologies - Lamella Clarifiers

    Efficient and Cost-Saving in Sedimentation Processes. Tube settlers, also called lamella clarifiers or lamella separators, are used to remove solids in water and sewage treatment. TUBEdek tube settlers are single plastic profiles combined to tubes. This design multiplies the sedimentation area up to 15 times per square meter surface area and helps to improve sedimentation in water and waste water treatment plants. Different executions support a better process and cost reduction of the plant.

  • 2H TUBEdek - Lamella Clarifiers (Tube Settlers)

    2H TUBEdek - Lamella Clarifiers (Tube Settlers)

    TUBEdek Lamella Clarifiers, also called tube settlers, are used for solids removal (sedimentation processes) in water and sewage treatment. TUBEdek can be used in rectangular and in circular tanks.

  • 2H - Model SK - Sedimentation Tank

    2H - Model SK - Sedimentation Tank

    The SK tank series offers a range of compact, ready-to-connect units for separating solids from liquids. The sedimentation process in these units is based on the proven counter-flow principle. They are available in different sizes with settling areas of 2 - 72 m2 and flow rates of 2 - 70 m3/h for usual sedimentation tasks. SK tanks can be installed easily and quickly. The innovative circular design (SKR) does not only save costs but also calms the...

  • 2H TUBEdek - Lamella Clarifiers for Round Tanks

    2H TUBEdek - Lamella Clarifiers for Round Tanks

    ENEXIO Water Technologies‘ concepts combine the advantages of the parallel plate separator technology with those of round sedimentation tanks. 2H TUBEdek® lamella clarifiers present the ideal solution for round tanks which are overloaded and where there is no room for expansion. 2H TUBEdek® lamella separators increase the plant capacity by enlarging the sedimentation area considerably. Depending on the application there are different...

  • ENEXIO - Model SKS Series - Lamella Clarifier for Efficient Sedimentation in Compact Units

    ENEXIO - Model SKS Series - Lamella Clarifier for Efficient Sedimentation in Compact Units

    SKS SKS lamella clarifiers are compact, ready-to-connect units for the separation of solids from liquids. They work according to the tried-and-tested counter-flow principle. Thanks to our TUBEdek lamella packs, the removal efficiency of the SKS separators is extremely high. The individual SKS lamella clarifiers modules with sedimentation surfaces from 18 m2 to 33 m2 can easily be connected in series and/or parallel to fulfill a wide variety of...

  • Water Technologies - Fills for Biofilm Processes

    In trickling filters and submerged fixed and moving beds, BIOdek fills and random media have proven to be a reliable basis for biofilm processes in municipal and industrial waste water treatment. They are as well used in recirculation aquaculture systems (RAS) in indoor fish-farming plants. Our great variety of different materials and fills with all kinds of shapes and surfaces enable the engineer to select the type suited best for his application.

  • 2H BIOdek - Cross-Fluted Fills

    2H BIOdek - Cross-Fluted Fills

    The structure and the high specific surfaces from 70 to 320 m2/m3 of BIOdek cross-fluted fills are perfectly adjusted to all requirements in biological sewage treatment processes. Different shapes of the fills allow growing thin or thick biofilms depending on what the process requires.

  • 2H BIOdek - Vertical Flow Fills

    2H BIOdek - Vertical Flow Fills

    BIOdek vertical flow fills form vertical channels and have open interfaces. Thus the sludge of thick biofilms does not accumulate and solids are easily expelled. The fill’s reinforced edges increase the bearing capacity and give a high resistance to erosion.

  • 2H BIOdek - Model IFAS - Integrated Fixed Film Activated Sludge System

    2H BIOdek - Model IFAS - Integrated Fixed Film Activated Sludge System

    2H BIOdek IFAS (Integrated Fixed Film Activated Sludge) offers a possible performance increase of up to 40 % without new aeration tanks. 2H BIOdek IFAS adds high surface media to an activated sludge basin. On this media additional biomass will grow and increase the operative sludge age: A higher performance will be achieved.

  • 2H BIOdek - Fills with Tubular Design

    2H BIOdek - Fills with Tubular Design

    BIOdek Fills with tubular design are used for biological water treatment and nitrification by contact aeration and for the separation of oil, fat and hydrocarbons. The fill consists of uniform parallel pipes (Tubes) with hexagonal shape. This design makes the BIOdek FAP  specifically resistant to blockage and easy to clean.

  • 2H Random Media for Moving Bed Reactors

    2H Random Media for Moving Bed Reactors

    Random media are installed in submerged moving bed reactors in municipal and industrial waste water treatment. They provide large specific surfaces for the growth of biofilm and feature an extremely high mechanical stability.

  • Water Technologies - Mass Transfer Components

    We deliver the complete range of structured packings and column internals for chemical scrubbers (absorption), physical scrubbers (absorption), strippers (desorption), bio scrubbers and biotrickling filters. Engineering services complete our offer. Whether it is the selection of the right material or the most suitable type of the packing, the hydraulic design or energy savings: Our experts will help you with experience and know-how. You may as well profit from our own software MASSdek

  • 2H MASSdek - Column Internals for Mass Transfer Applications

    2H MASSdek - Column Internals for Mass Transfer Applications

    Matching components promise an optimum level of performance. Therefore we enlarged our product range for mass transfer applications by integrating droplet separators, liquid distributors, bed limiters (retention systems) and support grids.

  • 2H MASSdek - Structured Packings for Mass Transfer Applications

    2H MASSdek - Structured Packings for Mass Transfer Applications

    Structured packings MASSdek are high-capacity fills for chemical and physical absorption, desorption and for bio scrubbers. In view of their excellent compression strengths, they are also well suited for bio trickling filters. Due to the special configuration of the fill, a uniform distribution of liquid is maintained under both high and low hydraulic loads.

  • Water Technologies - BESE-Elements

  • Bese-Elements - Biodegradable Grids

    Bese-Elements - Biodegradable Grids

    Ecosystem Restoration | Habitat For Biological Water Purification Systems; Growth of some biological water purification systems (like mussels or aquatic plants) requires artificial structures as starting point. But artificial materials can long-term pollute the environment. In search of a functional structure, which does not harm the environment, ENEXIO Water Technologies, Bureau Waardenburg and Rodenburg Biopolymers partnered to find a solution: A...

  • Water Technologies - Components for Agricultural Engineering

    Ever more stringent environmental requirements and constantly increasing competition in agriculture are demanding innovative solutions. To deal with this more effectively, we have devised an innovative range of products for agricultural technology in association with installation constructors, farmers, research institutes and public authorities.

  • 2H Plastic Components for Air Humidifying and Cooling

    2H Plastic Components for Air Humidifying and Cooling

    Excellent Cooling Capacities: For high productivity in livestock breeding it is becoming more and more important to respond to the specific requirements of the species involved. This includes controlling air temperature in the stables. The air in stables needs cooling particularly in regions where high temperatures prevail. To this end, an evaporative condenser is used to humidify and cool the artificially generated air flow. We have developed...

  • ENEXIO - Model KFP 158 - 2H Fills for Odor Control and Ammonia Reduction

    ENEXIO - Model KFP 158 - 2H Fills for Odor Control and Ammonia Reduction

    Exhaust Air Cleaning in Stables: Dust and ammonia are the substances to be cleaned from the waste air. Prescribed are cleaning efficiencies from 70-90% depending on where the sheds/stables are located. To efficiently and economically comply with this task, filling materials are needed which can be used in both counter and cross-flow applications (e.g. tunnel ventilation) in local waste air cleaning systems. The filling materials we have developed...

  • 2H PLASdek - Model 2H TEP 130 / 2H TEC 130 / 2H TAP 160 - Drift Eliminators

    2H PLASdek - Model 2H TEP 130 / 2H TEC 130 / 2H TAP 160 - Drift Eliminators

    Modern re-cooling systems need to consider aspects of the environment and sustainability. For cooling towers this means it is important to reduce the loss of water and emissions. Therefore drift eliminators are used. They are installed above the water distribution and cooling fills and catch the water drops that are carried with the air flow and redirects them into the cooling water circuit. 2H drift eliminators are available in two different types....

  • Water Technologies - Infiltration Boxes

  • 2H GEOdek - Stormwater Infiltration Boxes

    2H GEOdek - Stormwater Infiltration Boxes

    Decentralised, Tailor-Made Solutions for Stormwater Infiltration And Retention: GEOdek infiltration boxes store excess stormwater and release it afterwards. Made from Polypropylene, they exhibit exceptional strength and are resistant to all chemicals normally found below ground. GEOdek can be used under sealed surfaces such as streets and parking lots. 7 standard types cover requirements for different types of loads.

  • Dry Cooling Systems - Air Cooled Condensers

  • ENEXIO - Classic Air Cooled Condenser

    ENEXIO - Classic Air Cooled Condenser

    Enexio develops sustainable cooling systems to preserve natural resources. A proud part of our heritage of innovation in cooling technology is in being the inventor of the Air Cooled Condenser (ACC). The ENEXIO Air Cooled Condenser is a direct dry cooling system wherein steam is condensed inside fin tubes.

  • ENEXIO InAIR - Model ACC - Induced Draft Air Cooled Condenser

    ENEXIO InAIR - Model ACC - Induced Draft Air Cooled Condenser

    INAIR - The Innovative and Intelligent Air Cooled Condenser System. From the company who invented the Air Cooled Condenser, comes the next generation of innovative and intelligent design. The InAIR combines proven components and technologies to yield the next generation in dry cooling: an Air Cooled Condenser featuring induced draft fans. Induced draft fans have been used reliably in the majority of power plant main cooling systems worldwide, like in...

  • Dry Cooling Systems

  • ENEXIO ALEX - Aluminium Finned Steel Tube System

    ENEXIO ALEX - Aluminium Finned Steel Tube System

    The ALEX system of ENEXIO consists of an aluminium coated steel flat duct. Aluminium finnings between the flat ducts are hard-soldered to the aluminium coating of the flat duct. The solder fills the gap between the fin root and the core tube completely to achieve excellent heat transfer properties.

  • A-Tube System - Hot Dip Galvanized Elliptical Tubes

    A-Tube System - Hot Dip Galvanized Elliptical Tubes

    The A-tube consists of an elliptical core tube with rectangular steel finning. Heat transfer is optimized by hot dip galvanization. The gap between the fin root and the core tube is filled completely by zinc.

  • ENEXIO Heller - Indirect Dry Cooling Systems

    ENEXIO Heller - Indirect Dry Cooling Systems

    Invented by ENEXIO in Hungary in the early 1950s, Heller System has gained worldwide recognition as the ultimate dry cooling choice where minimum life cycle costs are in focus. Indirect Dry Cooling Systems include a water-cooled condenser, circulating machine groups; circulating water mains and a dry cooling tower accommodating Forgó-type water-to-air heat exchangers. The water-cooled condenser can either be DC Jet or Surface Condenser type.

  • ENEXIO - Hybrid Cooling Deluge Air Cooled Condenser (ACC)

    ENEXIO - Hybrid Cooling Deluge Air Cooled Condenser (ACC)

    The Deluge Air cooled condenser is the latest technological achievement in hybrid cooling, where the primary interest is in dry cooling, but where limited water resources are available for use during certain periods of the year. ENEXIO is one of the leading consortium partners of the EU-funded Horizon 2020 Research and Innovation programme called “MinWaterCSP” with the aim to develop advanced cooling technologies as well as integrated...

  • ENEXIO - Combined Dry/Wet Cooling Systems

    ENEXIO - Combined Dry/Wet Cooling Systems

    We provide sustainable systems with a strong economic basis. While wet cooling ensures high efficiency for the power generation cycle, the associated evaporation and blow-down of cooling water imposes various environmental and ecological impacts: The humid plume emitted by the wet cooling tower contributes to visible fog formation and icing of roads in cold weather. The constant evaporation and blow-down of cooling water requires substantial amount of...

  • Cooling Solutions - Wet Cooling Towers

  • Field-Erected Mechanical Draft Cooling Towers

    Field-Erected Mechanical Draft Cooling Towers

    For any Cooling-Water Flow and Heat Capacity: ENEXIO Cooling Towers. Fan-assisted cooling towers are the all-rounders among the cooling towers. They come with a compact design and are powerful and variably adaptable to the respective operating and climatic conditions. They are equipped with forced- or induced-draft fans and are the ideal solution for industrial applications such as in power plants, chemical and petrochemical plants, steel plants, air...

  • ENEXIO - Natural Draft Cooling Towers

    ENEXIO - Natural Draft Cooling Towers

    Our natural draft wet cooling towers have been used to cool water, primarily in energy production, for almost 100 year. The tower operates on the stack effect which causes the hot air in the tower to rise (natural draft).. The necessary stack can be designed in various ways. For both technical and cost reasons, reinforced concrete structures have become standard to handle the high cooling water flow rates from increasingly large power generating...

  • ENEXIO - Fan-Assisted Natural Draft Cooling Towers

    ENEXIO - Fan-Assisted Natural Draft Cooling Towers

    Natural Draft Cooling Towers can also be equipped with fans. The fans are installed at the air inlet for forced-draft air movement or on a deck above the fills to induce air flow. While air flow through a natural draft cooling tower is exclusively controlled by the height of the stack and the density difference between the cold and the hot air, the air is accelerated by the fans of a fan-assisted Natural Draft Cooling Tower to reduce the...

  • Cooling Solutions

  • ENEXIO - Wet-to-Dry Conversion System

    ENEXIO - Wet-to-Dry Conversion System

    Globally growing consumer demand for fresh water, and its sources diminished by the ever-changing climate, recurring droughts as well as consumption regulations make many wet-cooled power plants vulnerable to water scarcity around the world. Several industry analysts and many of our present customers agree, that where alternate sources for cooling tower make-up water are unavailable, converting the cooling system from wet to wet & dry...

  • Cooling Solutions - Ash Handling Systems - Ash Handling - Circumix Dense Slurry Technology

  • Dense (High Concentration) Slurry Discharge Pump Station

    Dense (High Concentration) Slurry Discharge Pump Station

    A long distance transport pump station is installed downstream of the Circumix dense slurry mixer. As the selection of the optimal pump system depends on a large number of parameters, we either specify and procure these pumps within their scope of supply or provide the project specific pump selection instructions during the basic design phase. In the latter case the Customer may have some liberty to choose between various pump types and...

  • Long Distance Transport Pipeline Systems

    Long Distance Transport Pipeline Systems

    Dense slurry is a thick suspension of fly ash in water with has higher density and viscosity than lean slurry. Due to the higher density higher pump heads are required for transporting DS in pipelines than a Newtonian fluid, such as clean water or lean slurry. The resulting increase in power consumption is more than offset by the less volume pumped if slurry density is kept at optimum. Dense slurry may hold the larger particles of bottom / bed...

  • Circumix - Basic and Optional Material Streams

    Circumix - Basic and Optional Material Streams

    Fly ash collection and inlet: The fly ash must be collected in dry form. Dry pneumatic fly ash conveying system to transport fly ash into storage silo(s) is recommended. The purposes of the silo(s) are to provide buffer capacity in emergency situations. Fly ash is generally classified as fine and coarse ash. In may happen that separate collection of the two types for quality classification is required. Circumix can be easily integrated even if two...

  • Wet Cooling Tower Service

  • ENEXIO - Remote Monitoring System

    ENEXIO - Remote Monitoring System

    Digitalize your plant and boost your performance. One of the main pillars of our brand identity is a high scale of customer-orientation by providing a comprehensive product portfolio based on innovative and creative solutions. Do you face a high auxiliary power consumption? Or a high water consumption? Are you tired of high spending on maintenance? Let us upgrade your plant to a next level with innovative Industry 4.0 technology by ENEXIO such as our...