ENVEA

12 products found

Products

  • Particulate CEMS

  • PCME - Model QAL 181 - Particulate Continuous Emission Monitor

    PCME - Model QAL 181 - Particulate Continuous Emission Monitor

    The PCME QAL 181 is an approved Particulate Continuous Emission Monitor (CEM) providing high quality emission measurement for low dust concentrations from industrial processes, especially in Incineration, Power Plant and Cement Kiln applications. The instrument provides a proven solution for applications where CEN standards EN 14181 / EN 13284-2 are applied (plant falling under the Waste Incineration and Large Combustion Plant EU Directives). The...

  • PCME - Model STACK 181 WS - Particulate Continuous Emission Monitor

    PCME - Model STACK 181 WS - Particulate Continuous Emission Monitor

    The PCME STACK 181 WS is suitable for measuring particulate emissions from wet scrubbers and other processes where the flue gas falls below dew point (cold stack conditions) or water droplets are present. The extractive instrument takes a representative continuous sample from the stack, heats this well above dew point to evaporate water droplets and then measures the particulate concentration under dry conditions. This extractive approach with heating...

  • PCME - Model QAL 991 - Particulate Continuous Emission Monitor

    PCME - Model QAL 991 - Particulate Continuous Emission Monitor

    The PCME QAL 991 is an approved Particulate CEM (Continuous Emission Monitor) designed to meet and exceed CEN standard EN 14181 / EN 13284-2. Particularly suited to monitoring emissions from industrial processes regulated under the European Waste Incineration Directive (WID) and Large Combustion Power Plant Directive (LCPD), the PCME QAL 991 is also proven in other industrial processes controlled with high efficiency bag filtration. The instrument...

  • STACK - Model 990 - Particulate Continuous Emission Monitor

    STACK - Model 990 - Particulate Continuous Emission Monitor

    The PCME STACK 990 is an approved particulate Continuous Emission Monitor suited to industrial applications in stacks after bag filters, cartridge filters, cyclones and process driers. The instrument combines regulatory approvals (TUV BlmSchV 17 and 13) for both dust measurement and leak monitoring, with reliable automatic...

  • PCME - Model STACK 980 - Particulate Continuous Emission Monitor

    PCME - Model STACK 980 - Particulate Continuous Emission Monitor

    The PCME STACK 980 is an approved Particulate Continuous Emission Monitor suited to industrial applications in stacks after bag filters, cartridge filters, cyclones and process driers. The instrument combines the latest regulatory approvals (MCERTS Performance Standards for Automated Dust Arrestment-Plant Monitors, version 1 (August 2010), class 2 PM-CEM) for both dust measurement and leak monitoring, with reliable automatic quality assurance...

  • PCME STACK - Model 602 - Particulate Continuous Emission Monitor

    PCME STACK - Model 602 - Particulate Continuous Emission Monitor

    The PCME STACK 602 is a cross-stack optical system used extensively for compliance measurement in the Power, Steel and Cement industries. With TUV approval for EN 14181 and EN 13284-2, the instrument is primarily used in applications with electrostatic precipitator boilers, calciners and large diameter emission stacks. The PCME STACK 602 can be used in processes where either direct Opacity (and extinction) measurement is required, or...

  • PCME - Model DM 170 - Backscatter Particulate Measurement Sensors

    PCME - Model DM 170 - Backscatter Particulate Measurement Sensors

    Part of PCME’s range of Backscatter particulate measurement sensors, the PCME DM 170 is designed to comply with the TUV suitability testing scheme to EN 15267 and for measuring dust concentrations in a wide range of industrial applications. Due to its wide dynamic range, the PCME DM 170 may be used in Combustion applications as well as in higher dust loading applications (Power, Cement and Metals smelting and processes without...

  • PCME STACK - Model 710 - Particulate Continuous Emission Monitor

    PCME STACK - Model 710 - Particulate Continuous Emission Monitor

    The PCME STACK 710 Opacity monitor is designed to meet and exceed US EPA PS-1 requirements for Opacity measurement from combustion stacks. The instrument provides low level measurement capability through advanced LED design, has no continuously moving parts, and offers class leading performance through outstanding reliability.

  • PCME - Model QAL 182 WS - Particulate Continuous Emission Monitor

    PCME - Model QAL 182 WS - Particulate Continuous Emission Monitor

    The PCME QAL 182 WS is suitable for measuring particulate emissions from wet scrubbers and other processes where the flue gas falls below dew point (cold stack conditions) or water droplets are present. The extractive instrument takes a representative continuous sample from the stack, heats this well above dew point to evaporate water droplets and then measures the particulate concentration under dry conditions. This extractive approach with heating...

  • PCME - Model QAL 260 - Particulate Continuous Emission Monitor

    PCME - Model QAL 260 - Particulate Continuous Emission Monitor

    The PCME QAL 260 series is suitable for measuring dust concentrations in Combustion, Incineration and other industrial stacks and is compliant with EN 14181. Having a 0-15 mg/m³ certification range, the PCME QAL 260 sensor can be used at low or high dust levels. Due to dynamic ranging, the sensor is also suitable for much higher dust levels found in Power, Cement and Metals smelting processes.

  • PCME - Model QAL 360 - Particulate Measurement Systems

    PCME - Model QAL 360 - Particulate Measurement Systems

    The PCME QAL 360 series is suitable for measuring dust concentrations in Combustion, Incineration and other industrial stacks and is compliant with EN 14181. Having a 0-7.5 mg/m³ certification range, the PCME QAL 360 sensor can be used at low dust levels meeting the tightened minimum emission limit value of 5 mg/m³ for Large Combustion Plant specified in the Industrial Emissions Directive. Due to dynamic ranging, the sensor is also suitable...

  • PCME - Model STACK 181 - Particulate Continuous Emission Monitor

    PCME - Model STACK 181 - Particulate Continuous Emission Monitor

    The PCME STACK 181 is suitable for measuring particle emissions after both bag filter and electrostatic precipitator arrestment plant. Utilising the patented ProScatterTM Forward Scatter measurement technique for measuring particulate concentration levels, typically between 0.06 mg/m3 to 300 mg/m3, this measurement technique offers improved levels of performance which make the PCME STACK 181 very suitable for use as a PM CPMS or PM CEMS that need to...