231 products found

products

  • ET - Model CDM1 (CDM2) - Construction Dust Monitor

    ET - Model CDM1 (CDM2) - Construction Dust Monitor

    The ET CDM is a small, stand-alone, weatherproof, web-enabled, real-time, particulate monitor available as either single channel (CDM1) or dual channel (CDM2). The CDM can be fitted with precise sharp-cut cyclone inlet heads for either PM10 or PM2.5 and a TSP inlet head is also available. The CDM incorporates a powerful 6-channel data logger and 3G/GPRS modem which can be set to automatically “push” data (as user-defined averages) to the...

  • Diffusion Tubes and Samplers for Air Quality Monitoring

  • Enviro - Diffusion Tubes

    Enviro - Diffusion Tubes

    Enviro Technology is able to offer clients a comprehensive service encompassing a wide range of Diffusion Tubes used in air quality monitoring applications. In addition to the supply of both diffusion and passive tubes, the service provides fast analysis of results by means of a partnership with a UKAS laboratory accredited to the international standard ISO 17025.

  • Enviro - Rapid Diffusion Samplers

    Enviro - Rapid Diffusion Samplers

    Rapid Diffusion Samplers are ideal for all rapid indoor, outdoor, personal and workplace air monitoring of VOCS and Nitrogen Dioxide. Description: A plastic (H.D.P.E) circular diffusive red/black sampler containing a sorbent for measuring gaseous nitrogen dioxide in ambient air. This sampler is designed to provide a considerably higher uptake rate than the passive axial diffusion tube which allows a higher flexibility of ambient air pollution...

  • Ambient Ion Monitoring for Scientific & Research

  • URG - Model 9000 Series - Ambient Ion Monitor

    URG - Model 9000 Series - Ambient Ion Monitor

    The 9000 Series Ambient Ion Monitors consist of four configurations. The URG-9000A Ambient Ion Monitor (AIM) provides time-resolved direct measurements of anion particulate Nitrate, Sulfate, Nitrite, Phosphate and Chloride found in PM2.5. Nitrite and Sulfate aerosols are produced as a result of the interaction of ammonia (NH3), NOx, SO2 and other gaseous constituents. These ions can represent a significant portion of the PM2.5 and are important in...

  • Automotive

  • Enviro - Roll Around Analytical Emissions Cart

    Enviro - Roll Around Analytical Emissions Cart

    The Economical Solution for Vehicle and Engine Emission Analysis. The California Analytical Emissions Cart has been designed to provide a compact, self-contained emissions system. The complete system is contained in a single bay, roll around cabinet that may be moved to various test sites as required.

  • Enviro - Model 600 Series - Chemiluminescent NO/NOx Digital Analyzer

    Enviro - Model 600 Series - Chemiluminescent NO/NOx Digital Analyzer

    The California Analytical Instruments Model 600 CLD NO/NOx digital analyser is designed around a state-of-the-art 16-bit microprocessor. The 16 bit microprocessor control board consists of the MSR-Card with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyser can be manually operated from the keypad or remotely via TCP/IP, RS-232C communications and discrete inputs. The  analyser display includes screen...

  • ZRE - Model NDIR - O2 Analyser for Single Infrared Light Beam

    ZRE - Model NDIR - O2 Analyser for Single Infrared Light Beam

    The ZRE NDIR analyser is based on the infrared absorption characteristics of gases. Using a single infrared beam to measure gas concentrations, this analyser produces highly stable and reliable results. A single infrared light beam is modulated by a chopper system and passed through a sample cell of predetermined length containing the gas sample to be analysed. As the beam passes through the cell, the sample gas absorbs some of its energy. The...

  • BLAQ-Sys - Compact Test Bench

    BLAQ-Sys - Compact Test Bench

    The BLAQ-Sys Test Bench is developed to monitor N2O and/or NH3 traces in combustion engine exhaust gas. While N2O significantly contributes to the greenhouse effect and therefore is undesirable in the exhaust gas of engines, NH3 is toxic and contributes to the destruction of the ozone layer. The BLAQ-Sys Bench detect both gas components in trace amounts. The  applied quantum cascade laser analyser ensures a very fast response time and high...

  • LSE - Model N2O - 4405 - Air Pollution Monitoring of Nitrous Oxide Analyser

    LSE - Model N2O - 4405 - Air Pollution Monitoring of Nitrous Oxide Analyser

    LSE Monitors has developed a robust and cost-effective analyser based on photo acoustics with a quantum cas-cade laser. The concentration of N2O in ambient air is continuously determined with a sensitivity of 0.005 ppm and a time resolution of 120 s. Although the concentration of N2O in the atmosphere is relatively high (330 ppbv), the day and night fluctuations are small and so are the seasonal differences. Therefore, highly sensitive and stable...

  • LSE - Model NH3 - 1710 - Air Pollution Monitoring of Ammonia Analyser

    LSE - Model NH3 - 1710 - Air Pollution Monitoring of Ammonia Analyser

    LSE Monitors has developed a robust and cost-effective analyser based on photo acoustics with a quantum cascade laser. The concentration of NH3 in sample air is continuously determined with a detection limit of 0.025 ppm and a time resolution of 2 seconds. Continuous ammonia measurements in ambient air Ammonia (NH3) plays an important role in neutralizing atmospheric acids like sulphuric or nitric acid.

  • Accuscan - Model 4600 - Remote Sensing System

    Accuscan - Model 4600 - Remote Sensing System

    The Accuscan 4600 system measures vehicle emissions in real time by using optical gas and particulate monitoring technology, set up at exhaust pipe height on the side of the road.

  • Vehicle Emissions Monitoring

  • Accuscan - Model RSD5000 - Remote Sensing Device

    Accuscan - Model RSD5000 - Remote Sensing Device

    With an ever-growing number of large and small vehicles commuting to and from our towns and cities every day, never has vehicle emissions monitoring been such a priority for local authorities.

Products by Opsis AB

  • Ambient Air Quality Monitoring

    We know the solution for any air quality monitoring situation. Our monitoring systems, approved by international institutes and authorities, are found in a range of applications around the world.

  • Opsis - Open-Path UV & FTIR DOAS Systems

    Opsis - Open-Path UV & FTIR DOAS Systems

    OPSIS AQM systems measure multiple gases in real time over an open path. Using the DOAS (Differential Optical Absorption Spectroscopy) technique, the system is non-contact, with fast response. One system can be configured to monitor NO, NO2, SO2, O3, BTX, NH3, CO, CO2, HF, H2O, CH4, Hg, HCl, among other gaseous compounds. A basic system includes an analyser, an emitter/receiver set, and an optical fibre cable. The system has been tested and approved...

  • OPSIS - Mobile Systems

    OPSIS - Mobile Systems

    OPSIS offers a wide range of shelter models and configurations to guarantee the optimal operation environment for your measurement equipment. We have experience in all environments, from hot and humid, to cold.

  • Opsis - Model LD500 - Laser Diode Gas Analyser (AQM)

    Opsis - Model LD500 - Laser Diode Gas Analyser (AQM)

    OPSIS LD500 Analyser is the central unit in the laser diode gas monitoring system. It can house up to four laser diode heads. Each head is a complete laser control and data sampling system. The laser diode gas analyser provides very fast monitoring of a range of gaseous compounds. Several gases can be monitored and a multiplexer offers several monitoring paths. Typical compounds are carbon monoxide (CO), carbon dioxide (CO2), hydrogen fluoride (HF),...

  • Opsis - Model HG200 - Mercury Analyser System

    Opsis - Model HG200 - Mercury Analyser System

    The Opsis HG200 mercury analyser is designed for ambient air quality monitoring, for detecting mercury indoors, and for monitoring in plants. The HG200 analyser monitors elementary mercury, Hg(0), concentrations in the ambient air, from health-hazardous down to the environmental background levels.

  • Opsis - Model SM200, PM10 - Particulate Monitor System

    Opsis - Model SM200, PM10 - Particulate Monitor System

    The PM10 monitor version of OPSIS’ SM200 particulate monitor provides accurate and reliable automatic measurements of PM10 particulate fraction concentrations in ambient air, as well as sampling of the PM10 particulate fraction for subsequent manual analysis.

  • Opsis - Model SM200, PM2.5 - Particulate Monitor System

    Opsis - Model SM200, PM2.5 - Particulate Monitor System

    The PM2.5 monitor version of OPSIS’ SM200 particulate monitor offers accurate and reliable automatic measurements of PM2.5 particulate fraction concentrations in ambient air, and sampling of the PM2.5 particulate fraction for later manual analysis.

  • Opsis - Model DL256 - Data Logger (AQM)

    Opsis - Model DL256 - Data Logger (AQM)

    OPSIS data logger system is designed for data acquisition applications. The data logger can handle analogue and digital input and output signals as well as serial communication. The hardware of the DL256 is based on modules. It is therefore easy to configure the system to meet a wide range of requirements, and the system can be upgraded by adding modules.

  • Opsis - Model WT256 - Web Transfer

    Opsis - Model WT256 - Web Transfer

    The WT256 collects data from OPSIS analysers and data loggers and pushes the data via FileTransfer Protocoll (FTP) or via file copy to a temporary storage site on a TCP/IP based network, such as the Internet. The data is downloaded automatically from the network storage site to one or several users, utilizing a download service installed on the target computer. Once downloaded, further data processing can be done with software for data presentation...

  • Continuous Emissions Monitoring

  • OPSIS - Cross-Stack UV & FTIR DOAS Systems

    OPSIS - Cross-Stack UV & FTIR DOAS Systems

    OPSIS CEM systems measure multiple emissions or process gases in real time in situ. Using the DOAS (Differential Optical Absorption Spectroscopy) technique, the system is non-contact, with fast response.

  • Opsis - Model 400CS - Cross-Stack System

    Opsis - Model 400CS - Cross-Stack System

    System 400CS is a cost-effective, high-performance monitoring package, designed for power plants and waste to energy plants. The measurements are based on the FTIR (Fourier Transform Infrared Spectroscopy) and/or 

  • Opsis - Model 400FL - Fastloop System

    Opsis - Model 400FL - Fastloop System

    System 400FL combines the benefits of hot wet extractive and in situ. The gas is moved at high speed in a bypass line. No filter or probe is used and the measurement takes place in a non-contact measurement cell.

  • Opsis - Model 400HWE - Hot Wet Extractive System

    Opsis - Model 400HWE - Hot Wet Extractive System

    System 400HWE Hot Wet Extractive is based on OPSIS UV/FTIR DOAS system giving fast response and best possible performance for all gases. The high resolution FTIR system is free from interference from all gases including water.

  • Opsis - Model LD500 - Laser Diode Gas Analyser (CEM)

    Opsis - Model LD500 - Laser Diode Gas Analyser (CEM)

    OPSIS LD500 Analyser is the central unit in the laser diode gas monitoring system. It can house up to four laser diode heads. Each head is a complete laser control and data sampling system. A built-in PC with LCD display controls the function of the instrument.

  • Opsis - Model M800 - Marine System

    Opsis - Model M800 - Marine System

    The DNV-GL approved System M800 measures SO2 and CO2 using the reference methods NDUV and NDIR. A light emitter and receiver creates a light path across the internal diameter of the stack. From the receiver, the light is guided in an optical fiber to the analyser.

  • Opsis - Model O2000 - Oxygen Monitor

    Opsis - Model O2000 - Oxygen Monitor

    The OPSIS O2000 oxygen monitor is designed to monitor oxygen concentrations in industrial applications such as continuous emissions monitoring (CEM) and process control. It has been given a ruggedized design (IP65 protection) allowing it to operate under tough conditions in aggressive flue gas environments.

  • Opsis - Model ER060L-EEx - Emitter and Receiver Systems

    Opsis - Model ER060L-EEx - Emitter and Receiver Systems

    The ER060L-EEx emitter and receiver set, together with Opsis LD500 laser diode gas analyser, is designed for gas monitoring in explosion classed areas Zone 1 and 2. The monitoring set creates a light path across the internal diameter of a stack or duct for an Opsis emissions monitoring system. Light is generated by the analyser, passed through the emitter and projected to the receiver.

  • OPSIS - Model DL256 - Data Logger (CEM)

    OPSIS - Model DL256 - Data Logger (CEM)

    OPSIS data logger system is designed for data acquisition applications. The data logger can handle analogue and digital input and output signals as well as serial communication.

  • OPSIS - Model WT256 - Web Transfer

    OPSIS - Model WT256 - Web Transfer

    The WT256 web transfer collects data from OPSIS analysers and data loggers and pushes the data via FileTransfer Protocol (FTP) or via file copy to a temporary storage site on a TCP/IP based network, such as the Internet. The data is downloaded automatically from the network storage site to one or several users, utilizing a download service installed on the target computer. Once downloaded, further data processing can be done with software for data...

  • Opsis - Dilution Analysers

    Opsis - Dilution Analysers

    Opsis offers compact analyser packages for monitoring NOX, SO2, CO and O2 in many different kinds of stack gas applications. - See more at: http://www.opsis.se/Products/ProductsCEMProcess/DilutionAnalysers/tabid/1073/language/en-US/Default.aspx#sthash.tqqVVHDo.dpuf

Products by Tekran Instruments Corporation

  • Ambient Air

    The Tekran 2537 performs continuous measurement of total gaseous elemental mercury in air with unmatched accuracy, precision and reliability. With the addition of the patented 1130 and 1135 Modules, the Tekran® 2537 is transformed into a fully automated atmospheric mercury speciation analyzer; the only device of its kind in the world.

  • Tekran - Model 2537X - Automated Ambient Air Analyzer

    Tekran - Model 2537X - Automated Ambient Air Analyzer

    The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean research vessels and hundreds of locations in between. As a testament to the longevity of our products, the...

  • Tekran - Model 1115i - Synchronized Multi-Port Sampling System

    Tekran - Model 1115i - Synchronized Multi-Port Sampling System

    The Tekran Model 1115i Synchronized Multi-Port Sampling System utilizes the advanced capabilities of the Model 2537X Mercury Vapor Analyzer to conditionally control up to eight separate valve input/output ports. The 1100i can be configured to automatically sample eight separate input ports. With the 1115i valves can be triggered based on a pre-set activation time, a pre-set delay interval, the A/B cycle status of the 2537X, the 2537X measured Hg...

  • Tekran - Model 1130 - Oxidized Mercury Speciation Module - Mercury Detection - Mercury Monitoring

    Tekran - Model 1130 - Oxidized Mercury Speciation Module - Mercury Detection - Mercury Monitoring

    The Tekranh Model 1130 Oxidized Mercury Speciation Unit expands the Model 2537 Mercury Vapor Analyzer capabilities to simultaneously monitor elemental and gaseous oxidized mercury (GOM, aka RGM) species in ambient air. The patented Model 1130 is the only system in the world capable of automated mercury speciation determinations in air. The Model 1130 is an invaluable tool for mercury detection, research and monitoring programs and is well known for...

  • Tekran - Model 1135 - Particulate Mercury Testing Unit

    Tekran - Model 1135 - Particulate Mercury Testing Unit

    The Tekran Model 1135 Particulate Mercury Module connects seamlessly to the top of the Model 1130 to continuously monitor ambient air particulate bound mercury (HgP), gaseous oxidized mercury (GOM) and gaseous elemental mercury (GEM). The complete Tekran 2537-1130-1135 Atmospheric Mercury Speciation System provides fully automated, unattended operation to determine all three mercury species concurrently. It is the only system available which has this...

  • Tekran - Model 1100 - Zero Air Generator

    Tekran - Model 1100 - Zero Air Generator

    The Tekran Model 1100 Zero Air Generator provides Hg free air for up to two Model 2537 Mercury Vapor Analyzers. Using an included communication cable, the Model 1100 will only produce zero air when needed by the Model 2537 analyzer, greatly increasing the lifespan of the zero air filters. The Model 1100 eliminates the need of compressed gas cylinders of Ultra High Purity (UHP) zero air. This is especially helpful for operations at remote field sites...

  • Tekran - Model 1102 - Air Dryer System

    Tekran - Model 1102 - Air Dryer System

    The Tekran Model 1102 provides dry air to the Model 1130 Pump Module zero air generating system. The dryer unit contains two columns that alternate between absorbing water when cool and desorbing water during a heated regeneration step. Ambient air is pulled through the cool column by the 1130 Pump Module to remove moisture (typical dew point -40 OC). At the same time the opposing column is heated to expunge captured moisture. The resulting dry air...

  • Tekran - Model 1110 - Synchronized Two Port Sampling System

    Tekran - Model 1110 - Synchronized Two Port Sampling System

    The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample two unique sources. Switching between the two sources is synchronized with the instrument sampling cycle and is fully programmable by the user. This is particularly useful for flux chamber studies to measure inlet and outlet concentrations, or gradient flux measurements at different heights. If desired, multiple 3-way valves...

  • Tekran - Model 1115 - Synchronized Multi-Port Sampling System

    Tekran - Model 1115 - Synchronized Multi-Port Sampling System

    The Tekran Model 1115 Synchronized Multi-Port Sampling System works in a similar fashion to the Model 1110, but the Model 1115 allows sampling of up to eight separate input sources. Switching between the sources is synchronized with the instrument sampling cycle. The number of sampling cycles in each position is programmable by the user. The Model 1115 can be configured in 4, 6 or 8 ports with either high-flow or low-flow options. Common applications...

  • Tekran - Model 1120 - Standard Addition Controller

    Tekran - Model 1120 - Standard Addition Controller

    The Tekran Model 1120 Standard Addition Controller allows both standard additions and blanks to be performed at user programmed intervals while using the Model 2537 Mercury Vapor Monitor. Standard additions are accomplished by timed activation of the Model 2537 internal calibration source and zero air selector valves. Standard additions can be timed to occur late in a sample loading cycle, providing confidence the gold cartridges are adsorbing mercury...

  • Laboratory

    Our newest instrument, the Series 2700 Automated Methyl Mercury Analyzer provides a fully integrated, self-contained compact unit operated via state-of-the-art, intuitive software. The Tekran 2700 offers analytical laboratories and researchers an alternative to the complex manual techniques.The Tekran 2600 utilizes a mercury detector capable of measuring sub-picogram quantities of mercury in water, soil, vegetation and other sample matrices. The Series 2600 was designed to be easy to set up,

  • Tekran - Model 2700 - Automated Methyl Mercury Analysis System

    Tekran - Model 2700 - Automated Methyl Mercury Analysis System

    The Tekran 2700 Methyl Mercury Analysis System offers an automated solution for complex and time consuming manual techniques. The 2700 is a fully-integrated, gas chromatography, cold-vapor atomic fluorescence spectrophotometer (GC-CVAFS). The 2700 can analyze distilled waters, extracted or distilled tissues and solids, and allows direct analysis of suitable water samples. The Tekran 2700 (MDL=0.002 ng/L) is operated via state-of-the-art, intuitive...

  • Tekran - Model 2600-IVS - Automated Sample Analysis System

    Tekran - Model 2600-IVS - Automated Sample Analysis System

    The Tekran Series 2600 system allows the analysis of ultra-trace levels of total mercury in laboratory prepared environmental samples (water, biota, soil, sediments, gas cartridges, effluents and more). It offers unparalleled sensitivity and flexibility for those who require truly sensitive total mercury analysis. The Series 2600 is capable of providing a fully automated implementation of EPA Method 1631. This method is capable of measuring waters and...

  • Tekran - Model Series 2600 - Flow Based Configuration Automated Sample Analysis System

    Tekran - Model Series 2600 - Flow Based Configuration Automated Sample Analysis System

    The Tekran 2600 Automated Total Mercury Analyzer allows analysis of a wide range of environmental matrices. The instrument has a modular design with unique “Top Deck” components allowing fast user switching between analytical methods such as EPA 1631, EPA 245.7, and EPA IO-5. The Tekran 2600 utilizes a CVAFS detector capable of measuring sub-picogram quantities of mercury. With our highly-regarded Tek-MDS-2 software package, the Tekran...

  • Tekran Mode - Model 2500 - Cold Vapor Atomic Fluorescence Spectrophotometer (CVAFS) Mercury Detector

    Tekran Mode - Model 2500 - Cold Vapor Atomic Fluorescence Spectrophotometer (CVAFS) Mercury Detector

    The Tekran Model 2500 Cold Vapor Atomic Fluorescence Spectrophotometer (CVAFS) detector is used for total and speciated mercury analysis in university, government and commercial laboratories. The 2500 has an absolute detection limit of < 0.1 picograms of mercury. The system is available with either an adjustable ball flow meter or precision mass flow meter (MFM). The latter option allows remote control and readout of the carrier flow rate. The MFM...

  • Tekran - Model 2750 - Methyl Mercury Distillation System

    Tekran - Model 2750 - Methyl Mercury Distillation System

    Tekran Instrument Corporation introduces the new Tekran Model 2750 Methyl Mercury Distillation System. The Tekran 2750 is designed to be compact and modular, reducing the required bench top footprint and scaling to your particular sample throughput. The system features a precision controlled aluminum heating block, and actively cooled water bath, accommodating simultaneous distillation of up to 30 samples. The Tekran 2750 is the perfect solution to...

  • Flue Gas CEM

    The Tekran Series 3300 Mercury CEM is in place at over 200 sources in the U.S. For every installation, we have met and exceeded all performance requirements for our customer’s state and federal regulations. With over 20 years of mercury instrument development in the laboratory and ambient air fields, we applied our knowledge to the Hg CEM industry and developed the exceptional Tekran 3300 Mercury CEM. Tekran is the most experienced mercury monitoring resource in the world and continues

  • Tekran - Model 2537Xi - Mercury Vapor Analyzer - Mercury Analyzer - Mercury Monitoring - Stack Monitoring

    Tekran - Model 2537Xi - Mercury Vapor Analyzer - Mercury Analyzer - Mercury Monitoring - Stack Monitoring

    The Tekran Model 2537Xi mercury vapor analyzer is built specifically for stack monitoring of flue gases and other elevated-Hg source gases. The 2537Xi is the cornerstone of the Tekran Series 3300Xi Mercury CEMs which has been installed at over 200 sites in the U.S. The 2537Xi has proven accurate, stable, and reliable under the most remote and rugged conditions. Designed for years of continuous use, Tekran’s patented pure gold cartridge is immune...

  • Tekran - Model 3321 - Oxidizer Module for Wall Mounted Sample Conditioner

    Tekran - Model 3321 - Oxidizer Module for Wall Mounted Sample Conditioner

    The Tekran Model 3321 Wall Mounted Sample Conditioner can be configured to supply Ionic Mercury Calibration Gas to the 3300Xi Hg CEM system. The calibration source allows both multi-point calibrations and standard additions to be automatically initiated. The unit generates concentrations of ionic mercury by oxidation elemental Hg output from the Tekran 3310Xi Hg Calibration Unit.

  • Tekran - Model 3321 - Wall Mounted Sample Conditioner - Flue Gas Analysis

    Tekran - Model 3321 - Wall Mounted Sample Conditioner - Flue Gas Analysis

    The Tekran Model 3321 Wall Mounted Sample Conditioner allows virtually any combustion gas matrix to be analyzed for total gaseous mercury, elemental mercury and ionic mercury. The Model 3321 is designed around a modular framework, allowing a wide range of applications from bench-scale research to full-scale installations. The wall-mounted design greatly simplifies installation and improves user serviceability.

  • Tekran - Model 3310 - Elemental Mercury (Hg) Calibration Unit

    Tekran - Model 3310 - Elemental Mercury (Hg) Calibration Unit

    The Tekran Model 3310 Elemental Mercury Calibrator allows high-level mercury monitoring systems to be accurately calibrated using elemental mercury. The Model 3310 allows both multi-point calibrations and standard additions to be automatically initiated. The unit generates known mercury concentrations using a NIST traceable temperature controlled saturated mercury vapor source. Precision mass flow controllers dilute the source output to the desired...

  • Tekran - Model 3342 - Sample Probes & Conditioning

    Tekran - Model 3342 - Sample Probes & Conditioning

    The Tekran 3342 is a customized version of an M&C Dilution Probe (Model SP2006-Hg). M&C probes are the industry standard and are well-known for their dependability and ease of servicing. The probe uses a titanium sintered filter to remove particulate matter from the sample stream. The sample is diluted and sent to the conditioner via a heated line. The probe and controller allow automated filter blowback, stinger blowback, system calibrations...

  • Tekran - Model 1306 - Water Filtration System

    Tekran - Model 1306 - Water Filtration System

    The Tekran 3342 is a customized version of an M&C Dilution Probe (Model SP2006-Hg). M&C probes are the industry standard and are well-known for their dependability and ease of servicing. The probe uses a titanium sintered filter to remove particulate matter from the sample stream. The sample is diluted and sent to the conditioner via a heated line. The probe and controller allow automated filter blowback, stinger blowback, system calibrations...

  • Tekran - Model 1304 - Air Filtration System

    Tekran - Model 1304 - Air Filtration System

    The Tekran Model 1304 Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Series 3300Xi Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and for the generation of calibration gas. Both types of air should be dry, oil free and particulate free, however the Zero Air is also scrubbed of...

  • Industrial

    The Tekran Series 2600-NG has been designed to measure mercury levels in natural gas using ASTM Method D-6350. Tekran provides all components needed for successful sampling including a pressure reduction system, cartridge heaters, and our Model 2505 Mercury Calibration System.

  • Tekran - Model 2505 - Mercury Vapor Primary Calibration Unit

    Tekran - Model 2505 - Mercury Vapor Primary Calibration Unit

    The Tekran Model 2505 Mercury Vapor Calibration Unit is an ultra-precise and accurate closed-vessel, saturated gaseous mercury source. The 2505 utilizes a thermoelectrically cooled mercury reservoir and dual temperature sensors calibrated against a US National Institute of Standards and Technology (NIST) traceable source producing exceptionally accurate Hg delivery. The mercury vapor is delivered manually using a high precision, digital gas tight...

  • Tekran - Model 2600-NG - Mercury Cartridge Analyzer for Natural Gas and Industrial Hygiene

    Tekran - Model 2600-NG - Mercury Cartridge Analyzer for Natural Gas and Industrial Hygiene

    The Tekran Model 2600-NG Mercury Analyzer is designed for the analysis of gas phase sample cartridges. The system contains an atomic fluorescence detector, a dual stage thermal desorber and a data acquisition & control system. A single serial connection allows a Windows based PC to control the entire analysis process, acquire the detector output and calculate final results.

  • Tekran - Model 2030 - Heated Cartridge Sampler

    Tekran - Model 2030 - Heated Cartridge Sampler

    The Tekran Model 2030 Heated Cartridge Sampler allows gold coated sampling cartridges to be heated while they are exposed to a variety of gaseous sample matrices (i.e. ambient air, natural gas, or process gases). The performance of gold adsorbent cartridges is greatly enhanced if the cartridges are heated during exposure. This virtually eliminates problems with condensation of passivation of the gold surface.

  • Tekran - Model 2642 - Natural Gas Sampler

    Tekran - Model 2642 - Natural Gas Sampler

    Tekran and VE Technology have partnered together to improve the quality of Natural Gas sampling and analysis. Proper sample collection requires precision equipment to assure mercury is quantitatively transported between the source pipeline and the sample collection device. The Tekran 2642 Natural Gas Sampler paired with a Tekran 2600-NG provides a complete sampling and analysis solution.

  • Tekran - Model 253 7Xi - NG - Natural Gas Mercury Monitor

    Tekran - Model 253 7Xi - NG - Natural Gas Mercury Monitor

    Complies fully with ASTM -6350 and ISO -6978. Unique dual -bed gold -quartz trap and pure gold analytical cartridge. Analytical cartridge never exposed to sample gas for clean operation. Multiple automated QA routines validate method performance. Range 1 ng/m3 to 2000 ug/m3. Network enabled for remote operation.

Products by Sabio Instruments, a division of Sutron Corporation

  • Sabio  - Model 6030 - Ozone Analyzer

    Sabio - Model 6030 - Ozone Analyzer

    Features: 2015 EPA Equivalent Method Designation. Color LCD Touch Screen. 19’ Rack Mount with 5” Height. Ethernet. RS-232. USB. Analog or Digital Output. Charting. Standard or Touch Screen Keypad. Many Other Features.

  • Sutron - Model 6020 - SO2 Analyzer

    Sutron - Model 6020 - SO2 Analyzer

    Features: 2015 EPA Reference Method Designation. Color LCD Touch Screen. 19’ Rack Mount with 5” Height. Ethernet. RS-232. USB. Analog or Digital Output. Charting. Standard or Touch Screen Keypad. Many Other Features.

  • Gas Dilution Calibrators

  • Sabio - Model 4010L - Gas Dilution Calibrator

    Sabio - Model 4010L - Gas Dilution Calibrator

    Users can easily perform gas dilution, ozone, and GPT calibration with Sabio Instrument’s intelligent Model 4010 gas dilution calibrator. The Model 4010 was designed to set a new standard of quality and performance for gas dilution calibrators. Enhanced with the latest technology, Sabio’s Model 4010 calibration system is an intuitive and effective way to precisely control the dilution of gas standards for calibration of ambient air and...

  • Sabio - Model 2010D  - Gas Dilution Calibrator Portable, Bench, Rack

    Sabio - Model 2010D - Gas Dilution Calibrator Portable, Bench, Rack

    The 2010D Intelligent Gas Dilution Calibrator can easily perform gas dilution, multi-source gas blending, ozone and gas phase titration (GPT) for environmental, laboratory, or point source monitoring calibrators. Enhanced with the latest technology, Sabio’s Model 2010D calibration system is an uncomplicated and effective way to precisely control the dilution of gas standards for calibration of ambient air and source monitoring analyzers.

  • Sabio - Model 2010 - Portable Gas Dilution Calibrator

    Sabio - Model 2010 - Portable Gas Dilution Calibrator

    Users can easily perform gas dilution, ozone, and GPT calibration with Sabio Instruments intelligent Portable Model 2010 gas dilution calibrator. The Model 2010 was designed to be small in size and weight for users who require true portability. Enhanced with the latest technology, Sabio’s Model 2010 calibration system is an uncomplicated and effective way to precisely control the dilution of gas standards for calibration of ambient air and...

  • Compressed Zero Air Sources

  • Sabio - Model 1001 - Zero Air Generator

    Sabio - Model 1001 - Zero Air Generator

    The Model 1001 series zero air generators were designed to meet the requirements of clean and dry air for dilution calibrators or other environmental applications. Additionally, the units offer a wide range of standard feature/options to accommodate a host of monitoring applications, including rack mount or portable environments.

  • Sabio - Model 2020 - Portable Zero Air Generator

    Sabio - Model 2020 - Portable Zero Air Generator

    The Model 2020 is a portable zero air generator designed to meet a wide range of requirements for the environmental industry. The unit is ideally suited to operate with the Sabio Model 2010 Gas Dilution Calibrator for testing of pollution monitoring analyzers.

  • Permeation Ovens

  • Sabio - Model 2500 - Permeation Oven

    Sabio - Model 2500 - Permeation Oven

    Sabio's Model 2500 Permeation oven is a simple, effective tool for generating precise gas concentrations for calibrating air quality analyzers, source monitors and other instruments. When combined with Sabio's Gas Dilution Calibrators, it creates a powerful and intelligent calibration system.

  • Sabio - Model 2505 - Portable Permeation Oven

    Sabio - Model 2505 - Portable Permeation Oven

    Model 2505 Portable Permeation Oven generates precise gas concentrations for calibration of air quality analyzers, source monitors and other instruments. The Model 2505 may be combined with the Sabio Model 2010 or 4010 Gas Dilution Calibrators to form a very powerful intelligent calibration system.

  • Oxidizers

  • Sabio - Model 1000M - Methane Catalytic Oxidizer

    Sabio - Model 1000M - Methane Catalytic Oxidizer

    The Model 1000M Methane Catalytic Oxidizer is a reliable method for the removal of methane or carbon monoxide. Ideal for use with any of Sabio’s air sources, this oxidizer is efficient in furthering the reduction of air pollutants before the zero air.

  • Portable Ozone Photometer

  • Sabio - Model 2030 - Portable Ozone Photometer Audit Transfer Standard

    Sabio - Model 2030 - Portable Ozone Photometer Audit Transfer Standard

    The Model 2030 is a portable Ozone Photometer audit transfer standard that is ideal for calibrating ambient air monitoring ozone analyzers and ozone generators. Using Beer-Lambert's Law, the Ozone photometer measures the amount of UV light attenuated at 254nm across a sample path. The unit alternates the ozone sample with a sample that has the ozone removed using a 3-way inert valve. After real time comparison between the two samples, the precise...

  • Sample Manifolds

  • Sabio - Model 1002/1004 - Heated Sample Manifolds

    Sabio - Model 1002/1004 - Heated Sample Manifolds

    Collecting and distributing homogenous ambient air samples for gas analysis is easy with the Sabio Model 1002 and 1004 heated Sample Manifolds. Able to work equally well in dry or humid and salty environments, the manifold is well-suited for collecting reactive air toxic data.

Products by GRIMM Aerosol Technik GmbH & Co. KG

  • Environmental Dust Monitors

    The name GRIMM is an institution in respect of optical dust measurement solutions for official and also industrial networks. As the pioneer with the first approved system of optical environmental dust monitoring, we passed until now over 15 equivalence tests worldwide (eg. US EPA, UK MCERT, Germany LUBW, Austria UBA, etc.). From Handheld solutions for ad hoc measurements over 19” Rack-Versions for professional container solutions up to stand alone versions for container independe

  • Grimm - Model EDM 107 - Hand-Held Environmental Dust Monitor

    Grimm - Model EDM 107 - Hand-Held Environmental Dust Monitor

    A hand-held device based on the approved Grimm EDM 180 With the compact Environmental Dust Monitor EDM 107 of Grimm's environmental product group, the entire PM values are on hand in real-time. This reliable top of the line device was developed especially for mobile and instant on-site measurements of environmental dust. It is portable, tough and displays simultaneously all three PM values (PM10, PM2.5 and PM1) in real-time. The PM masses are gathered...

  • Grimm - Model 11-E - Portable Environmental Dust Monitor

    Grimm - Model 11-E - Portable Environmental Dust Monitor

    The Mini Laser Aerosol Spectrometer (Mini-LAS) 11-E is the result of continuous development of GRIMM´s world-wide known and appreciated spectrometers. The combination of advanced data communication, innovative design and reliable optical measurement technology makes the 11-E the world champion of all portable fine dust measuring devices. With our proven measurement cell, based on the laser scattering light method, we reliably count every single...

  • Indoor Air Quality Monitors

    Dust monitoring instruments for indoor air quality have a long tradition at Grimm Aerosol. These optical laser light aerosol spectrometers monitor not only in real-time the dust concentration but also the particle size distribution in over 30 different size ranges and convert those results simultaneously to inhalable, thoracic, and alveolic fractions following the European and American regulations. Even the Nano particle size fraction is covered in a docent size ranges and can be expanded do

  • Grimm - Model 11-R - Handheld Research Aerosol Spectrometer

    Grimm - Model 11-R - Handheld Research Aerosol Spectrometer

    The Mini Laser Aerosol Spectrometer (Mini-LAS) 11-R is the result of continuous development of GRIMM’s world-wide known and appreciated spectrometers. The combination of advanced data communication, innovative design and reliable optical measurement technology makes the 11-R the world champion of all portable fine dust measuring devices. Because of the high-tech laser optics and the construction of the spectrometer, the 11-R captures every...

  • Grimm - Model 11-A - Aerosol Spectrometer

    Grimm - Model 11-A - Aerosol Spectrometer

    The aerosol spectrometer 11-A from Grimm Aerosol Technik is the star among the portable fine dust measurement devices. The 11-A is popular with almost all occupational health and safety officers, dust monitoring specialists, but also with universities and research institutes as a top class device. With over 2,000 devices, the 11-A is successfully used in countless different areas around the world. This “gold standard”, as many users call...

  • Nanoparticle Measurement Systems

    The name GRIMM Aerosol enjoys global recognition for innovative, high-quality and reliable instruments for the counting and sizing of Nanoparticles. Our customers – universities, research institutes, industrial companies, meteorological serivces and various authorities (e.g. for occupational health or environmental protection) are using our equipment for research indoors in their laboratories, outdoors in the environment, or even in research aircrafts for their studies and developments

  • Model 5403 - Condensation Particle Counter (CPC)

    Model 5403 - Condensation Particle Counter (CPC)

    This universal CPC can be used in a large variety of applications due to its compact design and its integrated SMPS options. The CPC may be operated as particle counter only or in combination with one of our Differential Mobility Analysers (DMAs) as SMPS+C (Scanning Mobility Particle Sizer) to measure size distributions from 5 to 1100 nm. Through combination with GRIMM optical aerosol spectrometers (“Wide Range Aerosol Spectrometer”,...

  • Grimm - Model 5410 - 5414 - Condensation Particle Counter (CPC)

    Grimm - Model 5410 - 5414 - Condensation Particle Counter (CPC)

    The Condensation Particle Counters (CPCs) 5410 - 5414 are the result of continuous development of GRIMMs world-wide appreciated technology. Signal processing was considerably improved to achieve a high concentration range at essentially zero false counts; and excellent linearity. These universal butanol CPCs can be used in a large variety of applications and all models can be upgraded with SMPS options.

Products by California Analytical Instruments, Inc. (CAI)

  • Non-Dispersive Infrared (NDIR) Analyzers

  • Model 600 Series - NDIR/Oxygen Multi-Component Analyzer

    Model 600 Series - NDIR/Oxygen Multi-Component Analyzer

    TheCAl Series 600 NDIR/02 analyzer is based on the infrared absorption characteristics of gases. Using a single infrared beam to measure gas concentrations, this analyzer delivers highly stable and reliable results. A single infrared light beam is modulated by a chopper system and passed through a sample cell of predetermined length containing the gas sample to be analyzed. As the beam passes through the cell, the sample gas absorbs some of its...

  • Model ZRE NDIR/O2 - NDIR/Oxygen Analyzer

    Model ZRE NDIR/O2 - NDIR/Oxygen Analyzer

    Cftl ZRE analyzers are based on the infrared absorption characteristics of gases. Using a single infrared beam to measure gas concentrations, ZRE analyzers deliver highly stable and reliable results. The infrared light beam is modulated by a chopper system and passed through a sample cell of predetermined length that contains the gas sample to be analyzed. As the beam passes through the cell, the sample gas absorbs some of its energy. The attenuated...

  • Oxygen Analyzers

  • Model 600P - Oxygen Analyzers

    Model 600P - Oxygen Analyzers

    CAI offers two dedicated analyzer models to measure Oxygen in a sample. The 600P uses paramagnetic technology and the 600F uses a fuel cell method to determine the percentage level of oxygen contained in a gas sample.

  • Flame Ionization Detection Analyzers (FID)

    The analyzer utilizes the principle of Flame Ionization Detection method to determine the THC, CH4 and NMHC within a gaseous sample. A gaseous sample becomes ionized in the flame and the electrostatic field causes the charged particles to migrate. The migration creates a small current. This current is measured by the amplifier and is directly proportional to the hydrocarbon concentration in the sample.

  • CAI - Model 600 Series - FID Hydrocarbon Analyzer

    CAI - Model 600 Series - FID Hydrocarbon Analyzer

    The California Analytical Instruments Model 600 FID Analyzers are designed to continuously measure the total concentration of hydrocarbons within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement systems.

  • CAI  - Model 600 Series  - HFID Hydrocarbon Analyzer

    CAI - Model 600 Series - HFID Hydrocarbon Analyzer

    The California Analytical Instruments Model 600 HFID Analyzers are designed to continuously measure the total concentration of hydrocarbons within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement systems. The instrument can measure THC in the ppm or percent levels. All internal components are maintained at...

  • Model CAI 600 Series - M-HFID Total Hydrocarbon/Methane/Non-Methane Hydrocarbon Analyzer

    Model CAI 600 Series - M-HFID Total Hydrocarbon/Methane/Non-Methane Hydrocarbon Analyzer

    The California Analytical Instruments’ Model 600 MHFID Analyzer is designed to continuously measure the total concentration of hydrocarbons or methane within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement systems. The instrument can measure THC or CH4 in the ppm or percent levels. All internal...

  • UV Fluorescence Analyzers

    This method is based on the fluorescence of SO2 due to absorption of ultraviolet (UV) energy. A UV lamp emits ultraviolet radiation that passes through a filter which excites the SO2 molecules and produce slight which is measured by a photomultiplier tube (PMT).

  • 600 Series UV SO2 Analyzer

    600 Series UV SO2 Analyzer

    The California Analytical Series 600 digital analyzer product line is designed around a state of the art 16 bit microprocessor, with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyzer can be manually operated from the keypad or remotely via TCP/IP, RS-232 communications and discrete inputs. The analyzer display includes screen presentation of all analyzer alarms. Four levels of password protection are provided....

  • Specialty Products

    CAI supplies peripheral equipment for enhanced sample handling and cost saving products.

  • ZAG-6L Zero Air Generator

    ZAG-6L Zero Air Generator

    The California Analytical Model ZAG-6L has been designed to operate continuously 24hours/ day, 7 days/week to provide a pure air source of “zero air” for use in analytical gas analysis equipment. The ZAG-6L completely eliminates the inconvenience and high costs of precision blended zero air cylinders. This is particularly important with instrumentation which, in addition to zero calibration air, requires pure air for burner combustion...

  • Model Pump Pak II

    Model Pump Pak II

    The CAI Pump Pak II was designed to provide analyzers without internal sample pumps with a means of delivering sample for analysis.

  • Model 101 Series Heated Sample Diluter

    Model 101 Series Heated Sample Diluter

    The CAI Model 101 Heated Sample Diluter is designed to precisely dilute samples of high concentrations of analytes and/or humidity. The Diluter has an internal heated sample pump and temperature adjustable oven. All components in contact with the sample are maintained at the set oven temperature preventing condensation. Dry air is mixed with the sample to the required dilution ratio insuring no condensate will be introduced into the analyzer.

  • Model 600 SGD - Gas Divider

    Model 600 SGD - Gas Divider

    The Model 600 SGD will allow a master calibration gas to be diluted by up to 63 points with and dilute gas. Savings in master gas cylinders and automatic operation will provide a cost effective solution to large inventories of cylinders. The internal microprocessor offers different levels of access with code protected user levels to protect from unauthorized changes of internal parameters. The internal gas list is used to store various gases and user...

  • Mark 3 Sampling System

    Mark 3 Sampling System

    The California Analytical Instruments Mark 3 Intelligent Sampling System is a third generation single board computer controlled industrial sequencer. The system has been developed over many years as higher specifications components have been added to the proven single board computers on the Mark 1 and Mark 2 Samplers. These have been in production for over 15 years. CAI specialize in custom building these systems and are able to modify and write special...

  • Integrated Systems

    CAI manufactures complete analysis systems for a  wide range of applications within many industries.

  • 600 Series NOxBox

    600 Series NOxBox

    The California Analytical Instruments’ NOxBox system has been specifically designed for harsh environment conditions frequently found in outdoor selective catalytic reactor applications. The analyzer system is housed in a Nema 4 enclosure with a front lockable door. The enclosure contains a heating and cooling system to maintain a constant internal temperature for the gas analyzer and interface equipment regardless of outside environmental...

  • Boiler Monitoring Systems

    Boiler Monitoring Systems

    Climate controlled NEMA Enclosure. Gases Available are CO, CO2, O2, NOX, HC. Utilizes Infrared, Chemiluminescent, FID and Paramagnetic Technologies. Sample Conditioning System Provides Clean, Dry Sample Gas Stream to Analyzers. Sample Probe With Heated Filter and Blowback. Withstands Sample Temperatures of up to 600 degrees F.

  • 600 LFG CH4/02 Land Fill Gas Analysis System

    600 LFG CH4/02 Land Fill Gas Analysis System

    Methane and Oxygen analyzer is housed in a climate controlled NEMA 4 or 4X enclosure approximately 48” H X 36” W X 16” D. The enclosure includes fittings for calibration gases, sample gas, and exhaust, solenoid valves for automatic calibration of each gas, inlet pressure regulator, flow meter with needle valve, particulate filter, and back pressure regulator assembly. Optional CO2 channel, water removal system, and sample pump are...

  • Mobile Source Emissions (Roll Around Emissions Cart)

    Mobile Source Emissions (Roll Around Emissions Cart)

    The California Analytical Emissions Cart has been designed to provide a compact, self-contained emissions system. The complete system is contained in a single bay, roll around cabinet that may be moved to various test sites as required. This system will allow direct measurement of carbon monoxide, carbon dioxide, oxygen, total hydrocarbons and oxides of nitrogen using proven research grade gas analyzers. All analyzers are Federal Register compliant ,...

  • Photoacoustic IR Analyzers

    In Photoacoustic Spectroscopy (PAS) the gas to be measured is irradiated by modulated light of a pre-selected wavelength. The gas molecules absorb some of the light energy and convert it into an acoustic signal which is detected by a microphone.

  • 1314/1412 Photoacoustic Analyzer

    1314/1412 Photoacoustic Analyzer

    The Innova Photoacoustic gas analyzers are highly accurate, reliable, and stable. Two versions of the analyzer are offered, the Model 1412 which is configured for bench top operation and the Model 1314 which is configured for rack mounted operation. The measurement system is based on photoacoustic Infrared detection and provides the capability of measuring virtually any gas that absorbs in the infrared spectrum. Gas selectivity is achieved through the...

  • Chemiluminescence Analyzers (CLD)

  • Model 600 CLD  - Chemiluminescence Analyzers

    Model 600 CLD - Chemiluminescence Analyzers

    The chemiluminescence method is used to measure the reaction between ozone and nitric oxide. In the NOx mode, the sample is routed through a converter. The resultant reaction is directly proportional to the total concentration of NOx. The reliability and rapid response time of CAI CLD analyzers make them particularly well-suited for the following applications:

  • Model 650 - Chemiluminescent NO/NOx & Paramagnetic Oxygen Analyzerr

    Model 650 - Chemiluminescent NO/NOx & Paramagnetic Oxygen Analyzerr

    The California Analytical Model 650 NOxygen NO/NOX/NO2/O2 digital analyzer is designed around a state-of-the-art 16 bit microprocessor, with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyzer can be manually operated from the keypad or remotely via TCP/IP, RS-232C communications and discrete inputs. The analyzer display includes screen presentation of all analyzer alarms. Four levels of password protection are...

  • Model 600 HCLD - NO/NOx Chemiluminescent Analyzer

    Model 600 HCLD - NO/NOx Chemiluminescent Analyzer

    The California Analytical Instruments Model 600 HCLD NO/NOx digital analyzer is designed around a state-of-the-art 16-bit microprocessor. The 16 bit microprocessor control board consists of the MSR-Card with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyzer can be manually operated from the keypad or remotely via TCP/ IP, RS-232C communications and discrete inputs. The analyzer display includes screen...

  • Fourier Transform Infrared Analyzer (FTIR)

  • Model 600 Series  - Fourier Transform Infrared Analyzer

    Model 600 Series - Fourier Transform Infrared Analyzer

    The California Analytical Instruments Series 600 FTIR provides fast, continuous and stable analysis of virtually any gas which has an infrared absorption spectrum. The proprietary heated sample cell allows the instrument to accommodate hot samples containing high levels of moisture. The 600 Series FTIR can simultaneously measure, display and output multiple gases to serve a variety of applications including diesel emissions, CEM monitoring, ammonia...