The Envirotac (Rhino Snot) line of polymers are the number one used soil stabilization chemicals by the Untied States Military. They have tested numerous products and continue to rely on Envirotac to protect our country`s assets. Applications include but are not limited to runways, landing pads, supply roads, base camps, and so much more. In a test conducted by the United States Naval Facilities Engineering Service Center our Envirotac polymer was 97% effective and the second most effective was a well known...
Environmental Products and Applications proudly supports history. We understand that preserving history is vital. That is why we offer Historical discounts to help provide infrastructure that is severely needed to make our great history accessible. Our applications will increase the strength of dirt roads but keep the natural dirt aesthetic.
Our Envirotac line of polymers are the perfect solution for stabilizing any soil related project in the golf industry. Use Envirotac to line bunkers before placing white sand and it`ll create a tough layer of protection that will prevent native soil from contaminating the imported sand. It will outperform traditional methods at a fraction of the cost and is a lot easier to apply. Envirotac will also keep decomposed granite (DG) in place, so when rains hit the DG it will not track onto the course. Great for...
Our Envirotac line of polymers have been assisting mines reduce airborne particulate matter for over 25 years. We have successfully chemically stabilized more acres of mine tailings in the United States than any other chemical stabilizing company. Whether it be fugitive dust on tailings, stabilizing haul roads, or making a nice durable surface for staging areas Envirotac has you covered.
Envirotac line of polymers have been used to construct roads around the world. Our polymers cross link the soils at a nano level creating a tough durable surface that will stand up to Heavy Haul trucks and the daily grind of vehicular traffic. If you are using Chlorides, Lignin`s, or Enzymes, make the switch to a superior road stabilizing technology.
Our Envirotac line of polymers are strong enough to be a runway with in-situ soils. Envirotac is often used for Airfield taxiways and runway shoulders at existing airfields. So if controlling dust and debris is a concern, Envirotac is the right solution. Treated areas will eliminate FOD and build a platform strong enough for airplanes and airport equipment to traverse over.
Envirotac line of polymers perform exceptionally well in constructing parking areas. Whether it be in-situ soils, road base, gravel, recycled asphalt, or decomposed granite Envirotac will lock the particles in place. It is great at controlling dust, preventing ruts and washboarding , and increasing the surface strength. Carbon black can be added to make the area look like asphalt and stripes can be painted over the surface.
Our Envirotac line of erosion control polymers works great to protect slopes and embankments from Erosion. Envirotac being an acrylic polymer will penetrate the earth soil and upon curing will bond the soil particles together. This will "laminate" the area reducing water and wind penetration keeping soil sediment in place. Unlike mulch applications, it will not sheet off but will stay adhered to the soil. Also it will not harm vegetation and in many instances will increase germination rates.
Envirotac line of polymers are the perfect solution for oil roads, oil pads, storage areas, and even frac pond lining. When Envirotac bonds the soil particles, it will create a tough durable surface that will withstand heavy loads and adverse weather conditions. It works better than conventional methods at a fraction of the cost. The time frame required to construct with Envirotac is greatly reduced, so you can start work immediately.
When considering applications to keep fugitive dust off of photovoltaic panels consider Envirotac. The buy back a site receives in efficiency and maintenance is nearly instant. When access roads are treated with Envirotac it will keep the applied areas dust free. This will control dust in place and not let it become airborne where it will ultimately settle on the panels. If surrounding areas release dust into the atmosphere use a light application of Envirotac at less than a penny a square foot to keep it from...
Envirotac line of polymers are commonly used on construction sites to control dust and reduce water. When an area has been mass graded contractors will use Envirotac to treat the disturbed areas as opposed to constantly watering them. One application of an Envirotac will last years and cost nearly one penny per square foot.
Envirotac has been used for dust control / soil stabilization on numerous BMX tracks throughout the United States. Its not uncommon for Nationals to be hosted on an Envirotac stabilized surface. When constructing turns and jumps incorporate Envirotac into the soil to keep the shape of the jump or turn and have a dust free surface that will hold up to rain and snow.
To prevent dust from giving up the location of Border Patrol vehicles, the Envirotac line of polymers have been utilized. It will not only prevent dust, it will eliminate the constant need to regrade the road by eliminating potholes and wash boarding. This will lower vehicle maintenance and repairs and increase the speeds in which vehicles can travel.
Fire access roads are required are on most construction sites. The psi requirement for a 80,000 lb Heavy Fire Truck & H-20 loading is 110 PSI. With the use of our Envirotac line of polymers you will achieve much greater than the max PSI amount required at a fraction of the cost of building a fire access road with traditional means.
Envirotac line of polymers can be used to make the base for landfills which will not allow the harmful pollutants to seep or leach into the earth. In addition, by spraying Envirotac on top of hazardous materials, it will contain the gases and odor by reducing the PPM, preventing air and water pollution.
When Envirotac bonds the soil particles, it will create a tough durable surface that will withstand heavy loads and adverse weather conditions. It works better than conventional methods at a fraction of the cost. The time frame required to construct with Envirotac is greatly reduced from traditional methods as well, so you can start work immediately.
Envirotac line of polymers has been effectively used as a sub-base for roads, out-performing a standard rock base in performance and significantly in cost. Envirotac has been a preferred choice by many Departments of Transportation, replacing rock base and then having a cinder seal or chip seal sprayed over.
Envirotac helps in dust control, mud control and avoids path and trail erosion. Aesthetically pleasing it will hold all soils and aggregate in place making a durable path and trail that will take minimum maintenance to upkeep.
Spraying Envirotac on loose soil binds the soil particles and does not let the them be carried into the air, preventing dust pollution, thus reducing dust allergies and other respiratory problems. One application will control dust for over a year at a fraction of the cost being spent maintaining with water.
Used on heavy haul roads, Envirotac prevents dust, wear, and erosion. Further, it helps saving water, preventing equipment damage due to dust, preventing loss of tire tread due to road wear and reducing emissions from equipment that would normally be used to maintain the road.
Envirotac line of polymers have been assisting mines reduce airborne particulate matter for over 25 years. Used on tailings, Envirotac will create a tough layer of protection that will laminate soil particles in place. We have had singular applications that have been effective for over 5 years.
If you have a large project both temporary or permanent and you need a staging yard, Envirotac line of polymers is a perfect product for you. The beginning phases of a project are usually the most dusty and when you want to keep your neighbors happiest and not complaining about your big new project. It is great for keeping dust down and stabilizing the area giving your area the strength it needs to support heavy equipment.
Our Envirotac line of polymers have been used on roads around the world. Used with in-situ material, Envirotac will increase the CBR, increase compaction, reduce soils permeability, create a dust free surface, and increase traction even when wet, all at a fraction of the cost of asphalt, importing rock base, maintaining with water and using bitumen.