Sign in to XPRT
Don't have an account? Get Started
Sign up to XPRT
Already have an account? Login here
Sign up to XPRT
Enter your email to restore your password
7 products found
PC F series is designed to produce maximum distillate quality with minimum capital and operating costs. Each model is a compact skid-mounted unit, simple, safe and easy to move. Control is by a PLC, including the functions of feed and discharge, therefore allowing automatic operation and minimum supervision. All models are designed for continuous operation, 24h/day, and require just electrical supply and compressed air.
The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F). Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a high final concentration and a distillate with low conductivity.
AC F series evaporators is the hot/cold water evaporators with forced circulation and external shell & tube heat exchanger. The heat necessary to boil the wastewater is supplied by hot water running into the heat exchanger; the cooling necessary to condensate the steam is supplied by cold water running into the heat exchanger at the top of the boiling chamber.
Designed to treat a high concentration of solids, Evaled® AC R often follows a primary evaporator in series to provide further concentration or crystallization of the concentrate.
EVALED RV F is the line of mechanical recompression evaporators designed to reach the highest level of reliability in heat transfer, with minimum impact in terms of fouling and scaling. High efficiency forced circulation shell & tube heat exchanger with horizontal tubes allows wastewater concentration up to the salts solubility limits and to manage also suspended crystals. Wastewater is constantly treated: the distillate and the concentrate are...
The evaporator of RV C series is based on the falling film technology as mechanical vapor recompression system. Wastewater flows down on the internal walls of the heat exchanger tubes, while the vapor produced condensates on the external walls of the same tubes.
The Green Technology of EVALED® Evaporation Technology for wastewater treatment includes all insights on the use and treatment of waste water as: heat exchange, evaporation and evaporators, CO2 Footprint challenge, Water Impact Index.
