FLSmidth

22 products found

Products

  • Pumps

    The original millMAX pump revolutionized the slurry pump industry with the initial patented suction side anti-recirculation device. This feature gained rapid acceptance in the mining industry, enabling FLSmidth to expand the range of Krebs pumps to what it is today. The range now encompasses metal, rubber and urethane-lined pumps, including high head, high efficiency, high pressure, vertical cantilever and recessed impeller options. The nature of slurry pumping requires excellent availability

  • KREBS gravelMAX™ - Centrifugal Slurry Pump

    KREBS gravelMAX™ - Centrifugal Slurry Pump

    Optimized design for abrasive slurries with large solids; Our innovative hydraulic design makes the gravelMAX the perfect solution for optimized passing size, efficiency and wear life.

  • KREBS millMAX™ - Proprietary-design Slurry Pump

    KREBS millMAX™ - Proprietary-design Slurry Pump

    Proprietary-design slurry pump; The key advantages of our efficient millMAX Slurry Pump design are lower power requirements (up to 30% less); long, even wear life; and less pump downtime – all of which result in lower cost-per-ton pumped along with better cyclone separation.

  • KREBS slurryMAX™ - Split-case Pump

    KREBS slurryMAX™ - Split-case Pump

    Our Split-case slurryMAX™ Pump solution; You asked for a split-case pump with longer wear life and better efficiency – one that can easily and safely be installed throughout your plants. Our solution? The slurryMAX, with multiple liner and impeller material options.

  • KREBS slurryMAX™ - Model XD - Split-case Slurry Pumps

    KREBS slurryMAX™ - Model XD - Split-case Slurry Pumps

    The slurryMAX XD has found success all over the world, in the most aggressive applications, for more than a decade. Extremely thick elastomer liners and a heavy-duty impeller provide this pump with extended wear life, in addition to all of the advantages gained from the millMAX suction-side-sealing system.

  • KREBS UMD™ - Ultimate Mill Discharge Pump

    KREBS UMD™ - Ultimate Mill Discharge Pump

    A heavy-duty slurry pump for tough, abrasive applications; Our KREBS UMD™ centrifugal slurry pump is the most advanced heavy-duty slurry pump available for mill discharge applications. Optimized hydraulic design delivers the highest efficiency and even wear in the most abrasive mining applications.

  • KREBS vMAX™ - Vertical Cantilever Sump Pump

    KREBS vMAX™ - Vertical Cantilever Sump Pump

    The vMAX™ Vertical Cantilever Pump for sump and process applications easily handles both conventional and extreme duties – even with highly viscous fluids or slurries that contain large solids.

  • Valves

    Customers from around the world are familiar with our long history of manufacturing quality equipment and the KREBS® Technequip Valves are no exception to the rule. Our KREBS® Technequip valves are designed as a premium heavy-duty slurry valve that can measure up to the most demanding applications. The full range of slurry valve styles and options we have available give us the flexibility to ensure you get a product that is well suited for your specific needs.

  • KREBS Technequip™ - Model TT - Ball-Check Valves

    KREBS Technequip™ - Model TT - Ball-Check Valves

    Isolate your pumps – simply and automatically – with our Ball-Check Valves; Isolate the duty and standby pumps in your mineral processing circuit with our two-way, floating ball-check KREBS Tech-Taylor Valve (TT). Requiring no air or electricity to operate, the Tech-Taylor Ball-check valve is the most cost-effective and efficient answer for pump isolation when you have two pumps in parallel.

  • KREBS Technequip™ - Model TGH / HP - High-Pressure Knife Gate Slurry Valve

    KREBS Technequip™ - Model TGH / HP - High-Pressure Knife Gate Slurry Valve

    The KREBS Technequip™ TGH / HP Knife Gate Valves are a true bi-directional slurry knife gate valve built to withstand high pressure conditions. We designed this premium performance valve with massive, replaceable rubber sleeves to seal and withstand the harsh conditions inherent in mining and industrial facilities.

  • KREBS Technequip™ - Model TG - Knife Gate Slurry Valve

    KREBS Technequip™ - Model TG - Knife Gate Slurry Valve

    The harsh conditions of your operation are a breeze with our KREBS® Technequip™ Valve. The TG Valve is a heavy-duty valve that is a true bi-directional slurry knife gate valve. A full flanged body allows for massive rubber sleeves to provide a reliable seal while withstanding the rough conditions inherent in mining and industrial applications.

  • KREBS Technequip™ - Model TGW - Knife Gate Slurry Valve

    KREBS Technequip™ - Model TGW - Knife Gate Slurry Valve

    The same proven design of our TG is now available in a wafer style! You stated a need for valves that can reliably isolate flow in demanding conditions where space is limited, requiring smaller face-to-face flange dimensions. Our solution? The TGW Wafer Style Slurry Knife Gate Valve – a robust design for lighter duty applications.

  • KREBS Technequip™ - Model T1 - Vacuum Breaker Valve

    KREBS Technequip™ - Model T1 - Vacuum Breaker Valve

    Break the vacuum, not your pipes with our automatic Vacuum Breaker Valve; In the event of pump or power failure, you need an automatic solution to break the vacuum created in your pipeline and prevent piping collapse. Our KREBS T1 Vacuum Breaker Valves, which unobtrusively mount on the top of the slurry pipeline, are self-operating – no actuator required.

  • Cyclones

    Since 1952, our advanced hydrocyclone technology has evolved to the latest generation KREBS® gMAX cyclone with patented geometry enhancements, providing high throughput and industry-leading performance. The finer and sharper separations resulting from these improvements benefit processes from hard rock mining, coal, pulp & paper, chemicals, power (FGD), and much more. As we constantly expand usage of advanced engineered wear materials, we continually extend the life of our cyclones, thus reduc

  • KREBS - Model CP - Close-Packed Vessels

    KREBS - Model CP - Close-Packed Vessels

    Keeping a solid focus on your fine-particle separation needs; hen fine particle separation is of utmost importance, only small-diameter cyclones will provide that critical cut point. Our CP (Close-Packed) Vessels use cyclones from 13mm (0.5-in) up to 76mm (3-in) that maximize the unit’s separation abilities and provide a finer cut point than any other cyclone in the industry.

  • KREBS CycloStack™ / CycloWash™ - Enhance Cyclones

    KREBS CycloStack™ / CycloWash™ - Enhance Cyclones

    Improve your cyclones’ performance with CycloStack™ and CycloWash™. Boost your cyclones’ dewatering performance with our CycloStack, which attaches to the bottom of a standard cyclone to automatically control the moisture content and discharge concentration of the cyclone underflow. Enhance cyclones’ separation and desliming capabilities with our patented, low-cost CycloWash device.

  • KREBS® - Model D-Series - Cyclones

    KREBS® - Model D-Series - Cyclones

    There’s a reason our D-Series Cyclones are found in mining processes. They work! Our D-Series Cyclone is a loyal workhorse in the world of cyclone technology – providing excellent separations, day in and day out keeping your processes running smoothly and less downtime. They are a go-to choice for your mining and industrial applications.

  • KREBS DeSanders - Cyclones

    KREBS DeSanders - Cyclones

    Solve your fine-particle separation challenges: KREBS DeSanders; Customisable and built to specification to fit your needs and application, KREBS DeSanders also incur a low capital cost. We offer a variety of sizes with different internal fittings, lined or unlined, mounted at any angle, to optimise performance for your operation.

  • KREBS gMAX - Hydrocyclone

    KREBS gMAX - Hydrocyclone

    Innovative hydrocyclone design; KREBS gMAX Cyclones incorporate improved geometry enhancing our inlet head, cylinder section, cones and apex. The result? Finer, sharper particle separations and significantly advanced performance for your operation.

  • KREBS - Radial Manifold Systems

    KREBS - Radial Manifold Systems

    Enhance your hydrocyclone performance with the proper manifold system. Cyclone performance does not always correlate to size. A cyclone is providing proper separation might require additional capacity, installing a larger cyclone is not the answer, as performance will drop. Instead, add a manifold with two or more cyclones; you will effectively increase capacity at the desired separation.

  • KREBS - Oil & Gas Desanding Cyclones

    KREBS - Oil & Gas Desanding Cyclones

    Protect your investment with multiphase desanders for oil and gas. One of the greatest challenges in oil and gas production is solids accumulation. The latest generation in hydrocyclone technology, gMAX® is designed to meet the harsh conditions of the upstream market. KREBS gMAX Desanding Cyclones, produce finer and sharper separations and increased throughput at lower pressure drops.

  • KREBS - Pulp Cleaner

    KREBS - Pulp Cleaner

    Efficiently remove contaminants from your paper pulp; Remove dense debris from paper pulp with our high-efficiency pulp-cleaning cyclones. Our continuous rejects cleaners, typically installed in multiple stages, remove fine sand from paper pulp. Intermittent rejects cleaners collect larger reject material and discharge it intermittently to minimise fibre loss.

  • KREBS gMAX - Urethane Cyclones

    KREBS gMAX - Urethane Cyclones

    Performance and longevity: benefit from both with Urethane Cyclones; Most separation equipment demands you make a choice. You end up sacrificing production, wear life and even end product quality looking for the best solution to your wet processing needs. Our Urethane Cyclones are different. You gain the best of all worlds – from capital outlay to capacity to quality to long wear life. Ease of installation is facilitated by our lower weight...

  • KREBS DeOiler - CycloClean Cyclone Vessel Systems

    KREBS DeOiler - CycloClean Cyclone Vessel Systems

    The best deoiler system you will ever use While it’s true that oil and water don’t mix, finding an effective and efficient system to separate the two liquids is not so easy. That is where the KREBS DeOiler Vessel steps in. Compact, consistent and incredibly low-maintenance, this proven hydrocyclone system removes hydrocarbons, regardless of flow rate.