General Carbon Corporation

8 products found

Products

  • Liquid Filtration - Filtration Equipment

  • The General - Water Pollution Control Barrels

    The General - Water Pollution Control Barrels

    The General Water Pollution Control Barrels are low cost, self-contained water purification adsorbers designed to treat liquid streams of up to 20 GPM. The units are available in three different sizes to better serve your treatment needs, 55 gallon, 85 gallon and 110 gallon.

  • Model MP-55 - Medium Pressure Liquid Adsorber

    Model MP-55 - Medium Pressure Liquid Adsorber

    General Carbon’s Medium Pressure 55 Gallon Adsober is designed for heavy-duty applications. The MP-55 is durable, strong, and intended for long-term use. Each unit comes equipped with lifting lugs, stainless steel bolts, a screened drain plug, and a pressure gauge port for monitoring your system operation. Each MP-55 adsorber is constructed of 12 gauge mild steel and is coated with coal tar epoxy on the inside and a 2-part epoxy on the...

  • Model TL-MP - Transportable Medium Pressure Liquid Phase Adsorbers (TL-MP)

    Model TL-MP - Transportable Medium Pressure Liquid Phase Adsorbers (TL-MP)

    The Transportable Liquid Phase Medium Pressure adsorbers are designed to handle higher pressures than our TL units. They are fabricated from mild steel but have a dished top head to increase their pressure rating. All units have two part Epoxy coatings on the inside and industrial enamel on the outside to give a long service life. Inlet/outlet fittings are steel FPT and are located on top of the vessels. Internals are PVC for corrosion resistance. The...

  • Model TL-Series - Liquid Phase 1000, 2000, 3000 Adsorbers

    Model TL-Series - Liquid Phase 1000, 2000, 3000 Adsorbers

    The Transportable Liquid Phase adsorbers are fabricated from mild steel and are tested to DOT shipping standards. All units have two part Epoxy coatings on the inside and industrial enamel on the outside to give a long service life. 2″ steel FPT inlet/outlet fittings on the top of the vessels are connected to PVC internals for corrosion resistance. The units have 4-way forklift access, a screened drain and 16-inch top manhole. GC 8×30...

  • Model J-Series - Liquid Phase Adsorbers

    Model J-Series - Liquid Phase Adsorbers

    J-Series Liquid Phase Adsorbers are ideal for liquid treatment applications where higher pressures must be dealt with. All J-Series units are built to 100 psi standards and are designed for long term installation. Units have two part epoxy coatings on the inside and industrial enamel on the outside. Standard units have PVC internals, two access ports, a vent connection in the top and steel FPT fittings and legs. Easy access to the activated carbon...

  • Model FRP-Series - Fiberglass Pressure Adsorber

    Model FRP-Series - Fiberglass Pressure Adsorber

    Resistant to many chemicals, General Carbon’s FRP-Series Liquid Phase Adsorbers are ideal where corrosion is a primary concern. Rated for 150 PSI these units can be used effectively in high-pressure applications. FRP vessels always have to be protected from vacuum conditions by use of a vacuum breaker in the line. The FRP-Series tanks come in many sizes to handle a full range of liquid flows. Made with an internal bladder wrapped in fiberglass,...

  • Model HP-Series - High Pressure Liquid Adsorbers

    Model HP-Series - High Pressure Liquid Adsorbers

    GC HP-Series Liquid Adsorbers are designed for industrial and municipal applications where large volumes of water at high pressure are treated. HP systems can be provided in single tank or duplex configurations. Duplex systems are skid mounted with a valve “tree” allowing lead/lag or parallel operation and the isolation of either tank for service. HP Series units are built to ASME Code Section VIII Div. 1 standard and can be...

  • GC - Bag Filter Housing Liquid Phase Particulate Filtration

    GC - Bag Filter Housing Liquid Phase Particulate Filtration

    Specifications: The housing has a 3-bolt swing lid closure, vent and gauge ports and two differential pressure ports to measure the differential pressure across the filter bag. Connections are 2 inch NPT with a side inlet and bottom outlet. The basket is made from 304 stainless steel with 9/64″ perforations. It can function as a strainer or a retainer for filter bags. Filter bags are available in 1, 3, 5, 10, 25 and 50 microns. The lid is sealed...