General Oceanics Inc.

10 products found

General Oceanics Inc. Products

  • Water Monitoring - PC02 Monitoring

  • General Oceanics - pCO2 Measuring System

    General Oceanics - pCO2 Measuring System

    The Model 8050 pCO, Measuring System is an autonomous analytical system for measuring carbon dioxide in oceanic surface water. The system is modeled after instruments previously built by Craig Neill/University of Bergen. The system may be used on a ship underway or, on a variety of at -sea platforms. The present pC02 system operates fully automatically.

  • General Oceanics - Model 7000 - CO2/H2O Gas Analyzer

    General Oceanics - Model 7000 - CO2/H2O Gas Analyzer

    CO2/H2O Gas Analyzer 7000 Includes Spare parts kit - Teflon gease, Bev-a-line tubing, ferrule set, fuses, scrubber7 Desiccant kit, fliters, RS232 cable & USB cable. Includes Spare parts kit - Teflon gease, Bev-a-line tubing, ferrule set, fuses, scrubber7 Desiccant kit, fliters, RS232 cable & USB cable.

  • General Oceanics - Air Flow Meter Kit

    General Oceanics - Air Flow Meter Kit

    Kit, Flow Meter PCO2 This kit is used to calibrate the model 8050 ATM gas flow. Kit includes flow meter, fitting and tubing to connect to the vent of the ballast. This kit is used to calibrate the model 8050 ATM gas flow. Kit includes flow meter, fitting and tubing to connect to the vent of the ballast.

  • General Oceanics - Model K8050-ATM - Atmospheric Air Kit

    General Oceanics - Model K8050-ATM - Atmospheric Air Kit

    Kit, Atmospheric Air PCO2 Kit includes 250 feet (85m) 3/8 inch (9.5mm) composite tubing, a rain guard and connectors. Kit, Atmospheric Air PCO2 Kit includes 250 feet (85m) 3/8 inch (9.5mm) composite tubing, a rain guard and connectors.

  • General Oceanics - Model K8050-JEQ - Equilibrator w/ Water Jacket No Thermometer Kit

    General Oceanics - Model K8050-JEQ - Equilibrator w/ Water Jacket No Thermometer Kit

    Kit, Equilibrator With Water Jacket PCO2 The kit Includes Hoses fittings and clamps necessary to replace the standard Equilibrator in our existing wet box. See part No D900820 for the jacketed equilibrator only. New Replacement equilibrator price does not include a thermometer Kit, Equilibrator With Water Jacket PCO2 The kit Includes Hoses fittings and clamps necessary to replace the standard Equilibrator in our existing wet box. See part No D900820...

  • General Oceanics - Model K8050-REG - Gas Regulator w/ CGA 590 Fittings Kit

    General Oceanics - Model K8050-REG - Gas Regulator w/ CGA 590 Fittings Kit

    Kit, Gas Regulator PCO2 Kit includes four two stage high purity compact pressure regulators, with CGA 590 fittings (the user supplied gas standard cylinders must match the regulator fittings), and stainless steel tubing used for interfacing the standard gas bottles to the dry box, and to connect the dry box to the wet box.

  • General Oceanics - Relay Assembly For Intake Pump Kit

    General Oceanics - Relay Assembly For Intake Pump Kit

    Kit, Relay Assembly for Intake pump PCO2 Optional relay to control an external water pump. The 8050 system includes a leak detection circuit that shuts off the water intake valve if a leak is detected inside the system. This switch would be used to turn off an external pump. Kit, Relay Assembly for Intake pump PCO2 Optional relay to control an external water pump. The 8050 system includes a leak detection circuit that shuts off the water intake valve...

  • General Oceanics - Water Intake w/o Pump Kit

    General Oceanics - Water Intake w/o Pump Kit

    Kit, Water Intake W/O Pump PCO2 Kit, Water Intake W/O Pump Kit does not include water intake pump (A pump must be specified for the desired voltage (110 or 220 Volt) and flow rate, Includes .375 ID reinforced tubing (specify length needed), tube fittings for the pump, and six hose clamps. Plase call for a quotation including the pump. Kit, Water Intake W/O Pump PCO2 Kit does not include water intake pump (A pump must be specified for the desired...