38 products found
products
-
Ammonium Measurement
-
AMMONO-CONT - In-Situ Ammonium Sensor
The AMMONO-CONT is the most cost-effective solution for continually controlling the concentration of ammonium at the wastewater plant on inflow, activation and nitrification. It can also be used in food safety monitoring and the chemical and pharmaceutical sectors, for ...
-
GIMAT - Model Gicon 1000 - Multiparameter Controller
The measuring transducer for all GIMAT probes. The simple menu structure and the touchscreen facilitate initial training and make operation straightforward. The integrated data logger and the diagram view make it possible to view the daily curve of the measured values on site on the display of the measuring transducer. The Gicon 1000 is available in different housings: The sturdy IP65 housing is designed for outdoor installation directly at the site of ...
-
AMMONO - Model LAB / FIX - Online NH4 Analysers
The AMMONO series features online analysers for the continuous monitoring of the ammonium concentration between 0.1 and 200 mg/l NH4-N or NH4. Thanks to gas sensitive measurement technology, AMMONO is not affected by interference ions. The advantages of the analyser include automatic calibration at regular intervals and the integrated sample pump, which makes an external feeding pump unnecessary in most cases. Available in three different housings: ...
-
In-Line BRIX Refractometers
-
Model PRM-100α - In-line Refractometer
Simply insert the system into a pipe as a means of monitoring food or drink production, or the manufacture of pharmaceuticals, process fluids and washing solutions, etc. The water content and mix ratio can be determined from the refractive index, Brix or concentration. The prism is specially designed to minimise adherence of solids to the surface, even after very long cleaning ...
-
COD Analysers
-
COD-LAB/COD-FIX - Model 200/2000 - COD Analysers
COD-LAB and COD-FIX are online analysers for continuous monitoring of chemical oxygen demand. The measurement range can be set at between 0.5 and 50.000 mg/L. The COD-LAB is suitable for use in dry, heated spaces. The COD-FIX can also be installed outdoors, directly at the site of measurement. The COD value is determined from the consumption of oxidising agent. To this end, hydrogen peroxide (H2O2) is added to the sample. Under the influence of UV ...
-
SPECTRO-CONT - Model SAC 8000 - Process Sensor System
The SAC 8000 process sensor measures spectral absorption coefficients (SAC) at 254 nm. The SAC is a measure of the content of organic components, such as COD. With a maximum range of measurement of 0-8000 mg/L CODeq, the SAC 8000 sensor can be used for numerous purposes in the monitoring of drinking, surface and waste water. The SAC 8000 sensor is simply inserted into the medium without having to take a sample. The COD measurements are taken without ...
-
Other Products
-
Model ZAW-LAB / ZAW-FIX - Respirometry/BOD analysers
The ZAW-LAB and ZAW-FIX Respirometry analysers are measurement devices for more or less continuous online determination of Respirometry. Respirometry implies the drop in oxygen content of a sample within a specified period of time. Respirometry is a measure of microbial breathing ...
-
COLORO-CONT - Colourimetric Analyser
The COLORO-CONT colourimetric analyser is suitable for monitoring the outflow of treatment plants in which coloured waste water is managed (range of measurement 0-500 Hazen). The COLORO-CONT principle is based on photometry. All the components of the COLORO-CONT system are neatly arranged on a plate for wall ...
-
Sampler
-
GIMAT - Model FS / FSV - Stationary Sampler
The samplers FS / FSV according to ISO 5667 are specially designed for automatic sampling of surface waters and waste water. They have all the functions that are necessary for fully automatic ...
-
Efcon omy - Stationary Sampler
The Efcon family of automatic samplers to ISO 5667, in a robust, double-walled plastic housing, are flexibly configurable, reliable and economical partners for all applications. The modern control unit Jazz allows time, quantity and event proportional sampling and time ...
-
Efcon - Wall-mounted / Portable Sampler
Sampler for wall mounting with sturdy thermoplastic housing according to ISO 5667. Easy to transport – ideal for use as portable sampler together with the separately available rack. The economic solution when no temperature-controlled cabinet for the samples is needed or if sampling is only required temporary. The modern controller Jazz with LCD display allows time, flow and event proportional ...
-
Online-Parameters
-
CooRe - CO2 Tester / Refractometer
CooRe combines an automatic CO2 tester and a refractometer in one device, making it the world’s first measuring device of its kind. CooRe measures beverages from bottles or ...
-
Seibold - Aluminium Analyser
The online analyser “Franz von Suppé” from Seibold’s Composer analyser family continuously determines the aluminium concentration. Robust, proven and tested measurement technology affords high precision and sensitivity while keeping instrument complexity low. The result is a cost-efficient measurement. Easy and safe handling thanks to non-toxic ...
-
Gimat - Model NH4 722 Z - Ammonium Probe
Ion selective electrode for ammonium with exchangeable membrane ...
Products by SEIBOLD Wasser - Analysatorenfabrik GmbH
-
Alban Berg - Online Analyser for Total Copper and Zinc
Basic Information: This process analyser was developed and built for industrial waste water and drinking water Industry. The main advantages are the combined measurement in one measurement step and the use of non toxic and non hazardous ...
-
SEIBOLD - Non Toxic Reagents for Online-Analyser for Heavy Metals
Reagents and chemistry used with SEIBOLD COMPOSER Analysers are free from toxic compounds. Our "Green Thumb" project started in 2006 and delivered its first products in 2008. In 2011 the complete range of SEIBOLD COMPOSER Analyser for Heavy Metals has been introduced to the ...
-
SEIBOLD - Model COMPOSER - Online Analyser for Heavy Metals
SEIBOLD COMPOSER Analyser can perform continuous analysis of heavy metals in water. The colorimetric analysis - stated by the WHO as reliable and best fitting method for online analysis - is used for reliable and accurate results and low total cost of measurement ...
-
Online Water Analyzer
-
SEIBOLD - Online Analyser for Aluminium
Natural sources. Aluminum (Al) is the most abundant metallic element in the lithosphere. Industry. Aluminium salts are widely used in water treatment as coagulants to reduce organic matter, colour, turbidity and microorganism levels. Such use may lead to increased concentrations of aluminium in finished ...
-
SEIBOLD - Online Analyser for Arsenic
Arsenic is found in the atmosphere, in water, soils, sediments and organisms due to releasing by various industrial processes, mining or smelting and agricultural activities as well as a byproduct of coal combustion. Natural sources. Arsenic is found in more than 245 ...
-
SEIBOLD - Online Analyser for Cadmium
SEIBOLD Online-Analyser for Cadmium Cadmium compounds belong to the most hazardous pollutants in the environment. Industry. Cadmium metal is used in the steel industry and in plastics. Cadmium compounds are widely used in batteries. Drinking water. Contamination in drinking-water may also be caused by impurities in the zinc of galvanized pipes and solders and some metal fittings. A guideline value of 0.005 mg/litre was recommended for cadmium in ...
-
SEIBOLD - Online Analyser for Chromium
Natural sources. Chromium is widely distributed in the Earth’s crust. It can exist in valences of +2 to +6. In general, food appears to be the major source of intake. Industry. Chromium is seldom used alone; as an additive it endows alloys or materials with new properties: strength, hardness, permanence, hygiene, color and resistance to temperature, wear and ...
-
SEIBOLD - Online Analyser for Cobalt
Sources: Natural sources. Natural sources of cobalt in the environment are soil, dust, seawater, volcanic eruptions and forest fires. Industry. Cobalt is used for for the manufacture of alloys, hard metals and magnets. Drinking water. A guideline value of 0.01 mg/litre was recommended for cobalt in drinking-water. Toxicity. As a constituent of vitamin B12, cobalt is an essential element and, so far, another physiological role of cobalt has not been ...
-
SEIBOLD - Online Analyser for Copper
Copper is both an essential nutrient and a drinking-water contaminant Natural sources. Most of the world’s Cu is found and mined in the form of copper sulfides and in combination with other metals that can also form multi-metalsulfide minerals (Fe, Sn, Pb, Se, As, Sb and ...
-
Alban Berg - Online Analyser for Copper and Nickel
This process analyser was developed and built for industrial waste water and drinking water Industry. The main advantages are the combined measurement in one measurement step and the use of non toxic and non hazardous ...
-
SEIBOLD - Online Analyser for Iron
Natural sources. Iron is one of the most abundant metals in the Earth’s crust. It is found in natural fresh waters at levels ranging from 0.5 to 50 mg/litre. Industry. Iron is used for various alloys, steel, in galvanisation process and other industrial ...
-
SEIBOLD - Online Analyser for Iron and Manganese
This Instrument was developed and built for Drinking Water Industry. Drinking water. Iron may be present in drinking-water as a result of the use of iron coagulants or the corrosion of steel and cast iron pipes during water distribution. There is usually no noticeable taste at iron concentrations below 0.3 mg/litre, and concentrations of 1–3 mg/litre can be acceptable for people drinking anaerobic well water. Manganese is naturally occurring in many ...
-
SEIBOLD - Online Analyser for Lead
Sources: Natural sources. Inorganic lead rarely exists in its elemental state but is found in the environment in various complexes. Industry. Lead is used principally in the production of lead-acid batteries, solder and alloys; the organolead compounds used extensively as antiknock and lubricating agents in ...
-
SEIBOLD - Online Analyser for Manganese
Natural sources. Manganese is one of the most abundant metals in the Earth’s crust, usually occurring with iron. Industry. Manganese is used principally in the manufacture of iron and steel alloys, as an oxidant for cleaning, bleaching and disinfection as potassium permanganate and as an ingredient in various products. More recently, it has been used in an organic compound, ...
-
SEIBOLD - Online Analyser for Nickel
Natural sources. The element nickel is found at low levels 0.0099% in the earth’s crust and exists mainly in the form of sulfide, oxide and silicate minerals. Industry. Nickel is used in alloys (stainless steel), electroplating, foundries, catalysts, welding rods and coinage, and can be found in electronic equipment, construction materials, aerospace equipment and consumer goods such as batteries, paints and ...
-
SEIBOLD - Online Analyser for Zinc
Zinc is an essential trace element found in virtually all food and potable water in the form of salts or organic complexes. Natural sources. Zinc species are predominantly determined in the aquatic environment and in soils and sediments. Industry. Zinc is used principally inelectroplating and semiconducting ...
-
SEIBOLD - Online Analyser for Tin
Sources: Tin is a post-transition metal and found in cassiterite, witch is made up to 80% of Tin. Most tin is found in alluvial deposits, riverbeds and former riverbeds, as a result of erosion of ore bodies containing the ...
Products by Atago Co.,LTD
-
Handheld Refractometers
-
ATAGO - Model MASTER-53T - Hand Held Refractometer
MASTER-53T are capable of measuring not only various kinds of juice, coffee, and other beverages but also processed food such as sauce, ketchup, low calorie jam, etc. These are an Automatic Temperature Compensation (ATC) model. The MASTER-T / PT series is a good alternative choice when the water resistant feature is not a priority.The MASTER-53T is made of metal, ...
-
ATAGO - Model Master-20T - Hand Held Refractometer
MASTER-20T are low concentration model up to Brix 20.0% suitable for juices, cutting oil etc. This is a good alternative choice when the water resistant feature is not a priority.The MASTER-20T is made of metal, and the MASTER-20PT is plastic. The specifications are exactly the same. For salty and acidic samples, choose the plastic body, ...
-
Digital Immersion Type Refractometer
-
ATAGO - Model PAN-1 - Digital Immersion Type Refractometer
No special equipment is necessary for the installation. Simply mount the unit on the side of a pot or tank. Continuous, real-time readings are ideal for all types of liquid, from cleaning and metal-working fluids to food and beverage. Readings are automatically updated every 30 seconds, switching between Brix and temperature each ...
-
ATAGO - Model PAL-39S - Hydrogen Peroxide Refractometer
This is ideal to measure Hydrogen peroxide concentration commonly used as a ...
-
Digital Viscometer
-
ATAGO - Model VISCO™-895 - Digital Viscometer
By changing the material used for body, legs and stand to alminium, unit weight is now 895g as described in the model name. Appearance and all features remain unchanged, while achieving 25% weight reduction compared to existing ...
-
ATAGO - Model VISCO™ B (L) - Digital Viscometer
Viscosity / Kinematic Viscosity: 12~60,000,000mPa?S?12~60,000,000cP. L1 12~600,000mPa?S?12~600,000cP. L2 30~3,000,000mPa?S?30~3,000,000cP. L3 48~12,000,000mPa?S?48~12,000,000cP. L4 240~60,000,000mPa?S?240~60,000,000cP. Torque:0.0~100.0% (Recommended torque 10.0 to 100.0%). ...
-
pH Meter
-
ATAGO - Model PAL-pH DPH - pH Meter
In conventional pH meters the glass electrode has a protrusion-like shape and is easily broken requiring delicate handling.The PAL-pH succeeded in developing a durable glass electrode that can withstand large loads. In various fields as well as food production sites, the risk of contamination and injuries can be reduced and used daily without hesitation. Also, the electrode does not require a storage ...