Products and Equipment from GLS Tanks International GmbH

GLS - Glass Lined Steel Tanks & Silos

Highest corrosion resistance, fast and easy erection, possibility to remodel, extend and dismantle, maintenance free, long lifetime, cost effective, easy ...

GLS - Balustrade

Standard Configuration: manufacturing afer DIN, material: S235 hot dip galvanised and hand rails, intermediate rails, foot ...

GLS - Doublesided Flange

Standard Configuration: manufacturing after DIN 2576, pressure stage: PN10, material: A2 or A4 stained, S235 hot dip galvanised, standardlenght: 150mm, configuration: oneside (in/out), ...

GLS - Manholes

Standard Configuration: material: A2 or A4 stained, S235 hot dip galvanised, standardlength: 150mm, configuration: onside ...

GLS - Mixer Flanges

Standard Configuration: material: A2 or A4 stained, S235 hot dip galvanised, standardlength: 150mm, configuration: onside ...

GLS - Platforms

Standard Configuration: material: S235 hot dip galvanized. Dimensionen: Lenght x Breadth: 1000 x 800, 1500 x ...

GLS - Roof Hatches

Standard Configuration: material: A2 or A4 stained, S235 hot dip gavanised, standardlength: 150mm, configuration: oneside ...

GLS - Glass Lined Steel Roof Kit

Standard Configuration: Steel-enamel with approx 20° roof pitch. The roof racks are mounted on the external side of the roof. They empty in the centre of tank on the crown ring on the edge of the tank at an addendum angle. The roof construction is self-supporting and is made out of hot-dip galvanised profiles. The enamelled roof panels are mounted under the steel construction with special stainless steel screws or hot-dip galvanised ...

GLS - PVC-Tarpaulin Roof

Standard Configuration: Planned roof construction with approx. 17° roof pitch. The cover is made out of a PVC sheet with welded sealing strips. The sealing strips are wired with stainless steel ratchets to the tank's wall. The planned roof is supported in the middle by a central ...

GLS - Trough Deck Roof

Standard Configuration: Aluminium profiled sheeting or galvanised/coated steel plates with a circulating edge bezel. The self-supporting subfloor, made out of hot-dip galvanized steel girders can have a diameter of up to 10m. Accessories: Dormer windows 600 mm x 600 mm, to be opened ...

GLS - Sight Glasses

Standard Configuration: manufacturing after DIN 2576, pressure stage: PN10, material: A2 or A4 stained, S235 hot dip galvanised, configuration: with/without lighting, with/without wiper, with/without spraying ...

GLS - Silo Hatches

Standard Configuration: material: A2 stained, configuration: outward opening, inward ...

GLS - Staircase Along Tank Wall

Standard Configuration: material: S235 hot dip galvanized, inside platforms in distances from 3m height, breadth: 800 ...

GLS - New High Pressure / Low Pressure Control Valve

Biogas digesters need to secure the pressure level, a high pressure / low pressure control valve is necessary. Very popular are fluid filled valves, that work with a sealing liquid consisting of a glycol / water mixture. Unfortunately, at almost all constructions on the market in case of high pressure the sealing liquid will be blown out. This represents a significant security risk because at the next moment the valve sealing liquid is missing, and ...

GLS Tanks - Tank-Bolt

Bolts for the building of tanks have to provide some special characteristics. They should be resistant against the stored media and easy to handle during erection. Bolts should also provide the highest level of strenght. One of the problems was to avoid the co-rotation during erection. According to that, special holding edges between head and shank were made. This holding edges jam with the holes of the glass lined sheets to avoid the co-rotation ...

GLS Tanks International GmbH Products