HI-Q Environmental Products Company

99 products found

HI-Q Environmental Products Company Products

  • HI-Q - Air Flow Calibrators & Adapters

    HI-Q Environmental Products Company manufactures a wide range of NIST traceable Air Flow Calibrators & In-Line Adapter Fittings. From rugged steel constructed housings to precision machined venturi tubes, HI-Q’s line of air flow calibrators are the most durable & dependable calibration devices available.

  • HI-Q - Model AFC-Dual-XX - Dual Range Air Flow Calibrators

    HI-Q - Model AFC-Dual-XX - Dual Range Air Flow Calibrators

    If you require visual accuracy over a large flow range, or wish to calibrate a number of air flow units consisting of more than one flow range, select HI-Q’s Dual Range AFC. The Dual Range unit consists of two pressure differential gauges installed in a single cabinet, that precisely measures both the low and high rate of air through a single venturi.

  • HI-Q - Model AFC-XX-Series - Analog & Digital Style Low & Medium Volume Air Flow Calibrators

    HI-Q - Model AFC-XX-Series - Analog & Digital Style Low & Medium Volume Air Flow Calibrators

    HI-Q Environmental Products Company’s steel constructed, two-component polyurethane painted Air Flow Calibrator (AFC) housings incorporate a precision machined venturi tube to create a pressure differential across a fixed orifice. By varying the air flow velocities, the pressure differentials are measured & recorded against a laminar flow element whose calibration is certified and traceable to the National Institute of Standards and...

  • HI-Q - Model FHA-Series - Calibration Adapter Plates (High Flow)

    HI-Q - Model FHA-Series - Calibration Adapter Plates (High Flow)

    HI-Q Environmental Products 'FHA-Series' adapters for air and climate, and air data management are designed to reduce overall pressure drop found during the calibration of standard 4' diameter and 8' x 10' filter paper sampling applications. The FHA's unique design reduces the overall paper to adapter fitting contact, thereby allowing the maximum obtainable free cross-sectional surface area through which unrestricted air can pass. This is done to...

  • HI-Q - Air Flow Calibrator Adapters Fittings for In-Line Calibration

    HI-Q - Air Flow Calibrator Adapters Fittings for In-Line Calibration

    Air Flow Calibrators are generally used to verify the displayed sample flow rate accuracy of complete air sampling systems. Along with the flow measuring device to be calibrated, it is recommended that a “Complete” system for calibration should also include the actual filter holder and filter media in order to duplicate realistic pressure drops experienced in a true sampling environment. The following adapters allow a technician to...

  • HI-Q - Model D-AFC-Series - All-In-One Digital Air Flow Calibrator

    HI-Q - Model D-AFC-Series - All-In-One Digital Air Flow Calibrator

    Through the implementation of a baro-metric pressure sensor, thermocouple, precision machined venturi tube and differential pressure sensor, HI-Q’s D-AFC- Series microprocessor based air flow calibrators are used to measure, record, & display instantaneous flow rate (i.e.: CFM, LPM, or CMH), temperature (degrees C or F), and barometric pressure (“Hg or mm Hg). Through onboard calculations the user may also select to display the flow...

  • HI-Q - Model HFC-Series - Digital & Analog Style High Volume Air Flow Calibrators

    HI-Q - Model HFC-Series - Digital & Analog Style High Volume Air Flow Calibrators

    The HFC-Series, HI-Volume Air Flow Calibrators, have eliminated the need for cumbersome orifice plates and water manometers. The HFC-XXC series units utilize a precision machined Venturi tube coupled with a pressure differential gauge giving a direct reading in the volumetric units of your choice (i.e. SCFM @ stp) . The unit is calibrated against an in-line N.I.S.T. traceable laminar flow element. The primary calibrator meets the requirements of...

  • HI-Q - Model V-FLO-XX-Series - Air Flow Measuring Unit

    HI-Q - Model V-FLO-XX-Series - Air Flow Measuring Unit

    The V-FLO-XX series units incorporate a flowmeter and a precision-machined venturi tube to create a pressure differential across a fixed orifice which floats the indicating ball in the flowmeter. By varying the flow velocities, the pressure differentials are measured & recorded against a laminar flow element whose calibration is certified and traceable to the National Institute of Standards and Technology...

  • HI-Q - Model AFC-Complete Series - Digital Display with Selectable Options Air Flow Calibrators for Air Data Management

    HI-Q - Model AFC-Complete Series - Digital Display with Selectable Options Air Flow Calibrators for Air Data Management

    HI-Q's AFC-COMPLETE digital air-flow calibrator for air and climate, and air data management, is 'the field technicians first choice' when it comes to air-flow calibration. This microprocessor based air-flow calibrator incorporates the use of a differential pressure sensor, a precision thermistor, an absolute barometric pressure sensor, and a precision machined venturi tube, to measure and calculate instantaneous flow rate in either CFM*, LPM*, or...

  • HI-Q - Model AFC-Digital Series - Digital Display with Flow Totalization Air Flow Calibrator  For Air Data Management

    HI-Q - Model AFC-Digital Series - Digital Display with Flow Totalization Air Flow Calibrator For Air Data Management

    HI-Q Environmental Products Company's steel constructed, two-component polyurethane painted Air Flow Calibrator (AFC) housings for air and climate, and air data management, incorporate a precision machined venturi tube to create a pressure differential across a fixed orifice. By varying the air flow velocities, the pressure differentials are measured & recorded against a laminar flow element whose calibration is certified and traceable to the...

  • HI-Q - Model AFC-Series - Analog & Digital Air Flow Calibrators For Air Data Management

    HI-Q - Model AFC-Series - Analog & Digital Air Flow Calibrators For Air Data Management

    HI-Q Environmental Products Company's steel constructed, two-component polyurethane painted Air Flow Calibrator (AFC) housings incorporate a precision machined venturi tube to create a pressure differential across a fixed orifice. By varying the air flow velocities, the pressure differentials are measured & recorded against a laminar flow element whose calibration is certified and traceable to the National Institute of Standards and Technology...

  • Air Sampling Accessories

    From Tripods to mount your air sampling equipment to Portable Power Supplies, HI-Q has the accessories in stock to complete your air sampling system. Do you need a hand full of custom hose fittings to complete your sampling train? HI-Q has your parts! Feel free to give us a call if you can’t find what you are looking for. Let our 34 years of experience work for you.

  • Hi-Q - Equipment Lab Jacks

    Hi-Q - Equipment Lab Jacks

    HI-Q Environmental Products Company’s adjustable height lab jack can be used in supporting & elevating air sampling equipment and calibration devices with an extension range between 3½” to 14”. The LABJACK’s sturdy frame can support equipment weighing up to 45 lbs. on its 6¼” x 7½” platform.

  • HI-Q - Model MCV-260 - Mechanical, Heavy Duty, Automatic Air Flow Control Valves

    HI-Q - Model MCV-260 - Mechanical, Heavy Duty, Automatic Air Flow Control Valves

    This valve will control the air flow rate to ±5% of the set flow rate over a wide pressure differential. It is the best commercially available mechanical vacuum flow controller. The unit operates by use of two diametrically opposed springs and a diaphragm that controls the valve opening. Depending upon pump capacity, flows between 0.5 to 10 CFM can be controlled by increasing or decreasing the spring tension with a wing nut found under...

  • HI-Q - Custom Mobile Air Sampling & Equipment Carts

    HI-Q - Custom Mobile Air Sampling & Equipment Carts

    HI-Q Environmental Products Company's Custom Mobile Air Monitoring & Equipment Carts have proven to be industry leaders. From the heavy-duty design of the MRV0523CV-ALPHA used primarily to support ALPHA CAM's, to the telescoping equipment platform of the MSC-PLSTC used primarily for the transport of complete battery operated air sampling systems.

  • HI-Q - Model PC-767 - Sample Saver Covers Open Face Filter Covers

    HI-Q - Model PC-767 - Sample Saver Covers Open Face Filter Covers

    Anti-Static plastic cover for HI-Q combination cartridge & filter paper holders. Ideal for transporting filter holders to and from the field & laboratory without cross-contamination or particle loss. Fits all HI-Q open faced, combination type, filter holders.

  • HI-Q - Quick Disconnect Fittings & Hose Barbs

    HI-Q - Quick Disconnect Fittings & Hose Barbs

    The following Quick Disconnect Couplings and Hose Barbs are for 'RV' Series Holders and Sampling Systems. HI-Q stocks male & female Stainless Steel and Brass Quick Disconnect fittings for all 3/8' fitting combinations.

  • HI-Q - Model RVSMPLN-XX & CFSMPLN-XX - Air Sampling & Return Exhaust Sample Lines

    HI-Q - Model RVSMPLN-XX & CFSMPLN-XX - Air Sampling & Return Exhaust Sample Lines

    Many air sampling procedures call for remote site sampling where the vacuum source (air sampling pump) cannot be conveniently located in the same area where sampling is required. This may be due to a variety of reasons including explosive sampling environments, inaccessibility, and noise level restrictions. For this reason, HI-Q has developed two types of sample retrieval and exhaust lines.

  • HI-Q - Model RV11-0211, RV23-0523 & RV23-1023 - Replacement Rotary Vane Vacuum Pumps

    HI-Q - Model RV11-0211, RV23-0523 & RV23-1023 - Replacement Rotary Vane Vacuum Pumps

    The Oilless Rotary Vane, Air Sampling Pumps incorporated in HI-Q’s continuous duty air sampling systems have “Lubricated-for-Life” ball bearings which leaves the internal workings virtually maintenance free. The only servicing needed is the occasional replacement of vanes, “O” Rings, filters, and gaskets when they become worn. Many variables determine the life expectancy of a pump, such as ambient temperature, operating...

  • HI-Q - Model S-275, R-275, #415, MR-5, MR-8, MR-12 & SK25 - Dry Gas Totaling Meters

    HI-Q - Model S-275, R-275, #415, MR-5, MR-8, MR-12 & SK25 - Dry Gas Totaling Meters

    HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet (connected on the vacuum side of an air sampling system). The direction of the flow must simply be...

  • HI-Q - Model TR-1, TR-1000B & TR-2000A - Air Sampling & Equipment Tripods

    HI-Q - Model TR-1, TR-1000B & TR-2000A - Air Sampling & Equipment Tripods

    HI-Q’s TR-1, TR-1000B, & TR-2000A are Light, Medium, & Heavy Duty Air Sampling & Equipment Tripods capable of extended sampling heights over 58 inches. For lightweight instrumentation, 12 pounds or less, HI-Q recommends the TR-1. For tripod applications which must be capable of supporting up to a 15 pound workload capacity, HI-Q offers the TR-1000B. For Heavy Duty applications were the sample workload capacity may reach up to...

  • HI-Q - Sample Saver Covers for Filter Holders

    HI-Q - Sample Saver Covers for Filter Holders

    Anti-Static plastic cover for HI-Q combination cartridge & filter paper holders. Ideal for transporting filter holders to and from the field & laboratory without cross-contamination or particle loss. Fits all HI-Q open faced, combination type, filter holders.

  • Air Samplers - Battery Operated Air Samplers - Solar Powered Air Samplers

    Since 1973 HI-Q Environmental Products Company's engineering staff has designed and developed hundreds of 'Custom, Turn-Key' Air Sampling Systems. Among these custom units are Complete Solar Powered Air Sampling Systems, which require Low Amp Draw, DC driven Battery Operated Air Samplers. Let HI-Q's experience work for you.

  • HI-Q - Model CF-1512/24-VBRL - Variable Speed, Brushless Blower, Battery Operated Air Sampler

    HI-Q - Model CF-1512/24-VBRL - Variable Speed, Brushless Blower, Battery Operated Air Sampler

    Due to the variable speed flow rate control, brushless maintenance free blower and portability, the CF-1512-VBRL air sampler is considered to be “The Ideal External Battery Operated Air Sampler”. The brushless blower used in the CF-1512-VBRL draws a maximum of 3.0 Amps at 6.5 CFM, permit-ting longer sampling times on a single battery charge. For higher maximum flow rates, with minimal Amp draw, consider using the CF-1524-VBRL which draws a...

  • HI-Q - Model CF-24B - 12/24 VDC - Fixed Speed Air Samplers

    HI-Q - Model CF-24B - 12/24 VDC - Fixed Speed Air Samplers

    The CF-24B, FIXED SPEED, 12/24 VDC external battery operated field air sampler unit is ideal for remote site grab sampling. An elapsed, resettable timer (with independent 5 year battery) is incorporated into the air sampler unit housing to track exact sampling duration. The throughput flow rate is dependent upon the pressure drop across the filter media and the supplied voltage (12 or 24 volts DC). The CF-24B includes a 1½” female...

  • HI-Q - Model CF-5624-WR - 24VDC - Weather Proof, Variable Speed, Brushless Blower, Battery Operated Air Samplers

    HI-Q - Model CF-5624-WR - 24VDC - Weather Proof, Variable Speed, Brushless Blower, Battery Operated Air Samplers

    The CF-5624-WR is optimized to use the minimum amount of electrical power in order to decrease the cost of implementing a solar powered air sampling system. The CF-5624-WR low power requirements also allow extended run times when used with battery only power. The 24 VDC brushless blower has a maximum amp draw of 1.5 Amps for a maximum power requirement of 36 Watts. The CF-5624-WR is designed for continuous use. The white powder coated...

  • Hi-Q - Model CF-993B & CF-993B-4 - Internal Battery Operated Portable, Fixed Speed Air Sampler

    Hi-Q - Model CF-993B & CF-993B-4 - Internal Battery Operated Portable, Fixed Speed Air Sampler

    HI-Q’s CF-993B & CF-993B-4 are ideal for remote location air sampling where line power is not available. An internally mounted sealed 12 Volt battery and battery charger eliminate the need for the transportation of cumbersome battery cables and the awkward handling of heavy batteries. The timer has 10 programmable timing functions with a wide time range. The flow rate of the CF-993B series air samplers are dependent upon the pressure...

  • Hi-Q - Model CF-995B Series - Variable Speed, Internal Battery Powered, Portable Air Sampler

    Hi-Q - Model CF-995B Series - Variable Speed, Internal Battery Powered, Portable Air Sampler

    HI-Q has incorporated a high efficiency, variable speed circuit in its CF-995B, battery operated air sampler series which allows its users to preset flow rates by varying the blower motor speed. The CF-995B & CF-995B-4 are ideal for adjustable flow, remote location air sampling where AC line power is not available. An internally mounted battery and battery charger eliminate the need for the transportation of cumbersome battery cables and the...

  • HI-Q - Custom Battery / Solar Operated Air Sampling Systems

    HI-Q - Custom Battery / Solar Operated Air Sampling Systems

    Since 1973 HI-Q Environmental Products Company’s engineering staff has designed and developed hundreds of “Custom, Turn- Key” Air Sampling Systems. Among these custom units are Complete Solar Powered Air Sampling Systems, which require Low Amp Draw, DC driven vacuum pumps. Let HI-Q’s experience work for you.

  • HI-Q - Model TFIA-4BC - 12/24 VDC - Fixed Speed Air Sampler / Air Monitor

    HI-Q - Model TFIA-4BC - 12/24 VDC - Fixed Speed Air Sampler / Air Monitor

    The TFIA-4BC is identical in configuration to the TFIA accepting the same TFIA options (excluding speed controller) as the AC power version depicted in the Portable HI-Volume Air Sampler section of this catalog. The TFIA-4BC operates on two automotive batteries in series, or for half the flow rate with one 12 Volt Automotive Battery (Batteries not included). See “Air Sampling Accessories” section of this catalog for optional 12/24...

  • HI-Q - Model CF-18V:12 VDC - Variable Speed, Manual/Timer Controlled Air Samplers / Air Monitor

    HI-Q - Model CF-18V:12 VDC - Variable Speed, Manual/Timer Controlled Air Samplers / Air Monitor

    The CF-18V field unit operates on a single 12 volt automotive battery (not included). The two stage centrifugal fan pump motor is speed controlled by a rheostat which allows an operator to set a desired volumetric flow rate. An In-Line venturi allows for instantaneous flow measurement directly from an individually calibrated Magnehelic. Continuous or 0-30 minute grab samples can be taken on a variety of 'CF-Type' combination or paper only filter...

  • Continuous Duty Air Samplers

    HI-Q's Continuous Duty Air Sampling Systems allow for mobile or fixed location continuous duty/constant flow rate air samples at operator pre-set flow rates. These complete sampling systems are commonly used as the primary air mover for gas/particulate collection and/or real time air monitoring.

  • HI-Q - Model CMP Series - Cabinet Mounted, Continuous Duty, Constant Flow Air Sampling Systems

    HI-Q - Model CMP Series - Cabinet Mounted, Continuous Duty, Constant Flow Air Sampling Systems

    HI-Q's CMP-Series air sampling systems allow for continuous duty/constant flow rate air samples at operator pre-set flow rates. These continuous duty, constant flow, self contained air sampling systems are commonly used as the primary air mover for gas/particulate collection and/or real time air monitoring. Two face mounted vacuum gauges allow the user to observe pump performance and filter loading. An internal filtration system hinders premature...

  • HI-Q - Model LF Series - Low Flow, Cabinet Mounted, Continuous Duty Air Sampling Systems

    HI-Q - Model LF Series - Low Flow, Cabinet Mounted, Continuous Duty Air Sampling Systems

    With a continually increasing demand, HI-Q Environmental Products Company has developed a new line of low flow, low cost, manual flow control air sampling systems. HI-Q has configured this line of complete sampling systems with flow ranges from 5-CCM to 50-LPM. Each unit includes a shock mounted vacuum pump, lightweight carrying case with non-skid feet, carrying handle, 6 foot grounded power cord, electronic timer registering elapsed hours &...

  • Hi-Q - Model M.A.S.S. - Mobile Air Sampling Station, High & Low Flow Samplings

    Hi-Q - Model M.A.S.S. - Mobile Air Sampling Station, High & Low Flow Samplings

    HI-Q’s Mobile Air Sampling Station can be supplied with controllable flow rates from as little as 2 SCCM up to, as high as 200 SLPM. The unit can be equipped as either a single or dual flow sampling system – you make the call. Have an existing Stack Flow Rate Monitor? HI-Q’s MASS Unit can easily be linked together with an existing stack-flow monitor to achieve real-time Iso-Kinetic stack sampling or HI-Q can supply the...

  • HI-Q - Model MRV Series - Mobile Cart Continuous Duty, Constant Flow Air Sampling System

    HI-Q - Model MRV Series - Mobile Cart Continuous Duty, Constant Flow Air Sampling System

    This 'Golf Cart' type unit can be used for the assay of both particulates and gaseous radioiodine. Its telescoping 'Goose Neck' allows for industry standard breathing zone air sampling. There is a 3/8' female Quick Disconnect fitting at the sampling inlet which accepts all 'RV' series filter holders. Two vacuum gauges for measuring pressure differential across the filter media are conveniently mounted in a control box on the units handle along...

  • HI-Q - Model PSU Series - Outdoor Rated, Continuous Duty, Mobile Cart Air Sampling Systems

    HI-Q - Model PSU Series - Outdoor Rated, Continuous Duty, Mobile Cart Air Sampling Systems

    This extremely popular, outdoor rated continuous duty air sampling system is intended for secure outdoor ambient particulate and/or gaseous air sampling. The pump, control valve, and control panel are all hard mounted in a heavy gauge TIG welded aluminum, fully lockable, fan cooled, weather proof enclosure. The control panel houses the power switch, fuse protection, resettable electronic timer and either an analog or digital flow display. The...

  • HI-Q - Model Tri-Car - Tritium and Carbon-14 Samplers

    HI-Q - Model Tri-Car - Tritium and Carbon-14 Samplers

    The “Tri-Car” (Tritium – Carbon) family of 3H and 14C airborne samplers can be configured to sample either quantities of 3H in the form of water or 14C in the form of carbon dioxide. A configuration is available as a differential sampler which converts other forms of 3H and 14C into water and carbon dioxide to obtain a separate sample of HT, elemental hydrogen, 14CO, carbon compounds, and elemental carbon. This configuration of...

  • HI-Q - Model VS23 Series - Continuous Duty, Constant Flow Air Sampling Systems

    HI-Q - Model VS23 Series - Continuous Duty, Constant Flow Air Sampling Systems

    The VS-Series Air Sampling Systems can be either incorporated as the primary vacuum source in air monitoring instrumentation or used in conjunction with filter holders and filter media for the collection of particulate and/or gaseous constituents. The systems are furnished complete with a shock mounted base motor/pump, carrying handle, heavy duty constant air flow control valve (MCV-260), venturi flow meter, exhaust muffler, hard mounted toggle...

  • Filter Holder

    HI-Q has an extremely wide range of combination & paper-only filter holders. HI-Q’s filter holders are used for the collection of solid particulate on paper and/or volatile compounds in a filter cartridge taken from the air with either a high or low volume pump. HI-Q stocks everything from 8” x 10” open-faced paper-only filter holders to In-Line combination Paper & Cartridge holders. Feel free to give us a call if you can’t find what you are looking for.

  • HI-Q - Combination Cartridge & Paper Holders - Combination Filter Holder

    HI-Q - Combination Cartridge & Paper Holders - Combination Filter Holder

    The following filter holders may be used for the collection of solid particulate on paper and/or volatile compounds in a filter cartridge taken from the air with either a high or low volume pump. In choosing the correct holder one needs to know the specific paper size (usually 2' or 47mm dia.), and a cartridge configuration. Cartridge configurations can be found under the Analytical Cartridge Section of this catalog. All HI-Q filter holders are...

  • HI-Q - Paper Only Filter Holders

    HI-Q - Paper Only Filter Holders

    The following filter holders are used for the collection of particulate from the air (in-line or open faced) taken with either high or low volume pumps. Choosing the correct filter holder is dependent on three factors: 1. Type of Pump (Rotary Vane or Centrifugal Fan), 2. Filter paper dimensions (i.e.: 2' dia., 47mm dia., 8' x 10' , etc.…), and 3. Type of connecting fitting (i.e.: 3/8' male quick disconnect or thread type). All of HI-Q's filter...

  • HI-Q - Removable Filter Paper Cartridge

    HI-Q - Removable Filter Paper Cartridge

    Removable Filter Paper Cartridge (8×10 and 4″ diameter Removable Filter Paper Cartridges). Allows a user to pre-load & remove existing filter collection media in a controlled environment. When in the field the user is able to replace the existing (used) cartridge with the pre-loaded (new) cartridge without having to directly handle the filter collection media.

  • Filter Media for Air Samplers

  • HI-Q - Ashless Cellulose & Carbon Impregnated Filter Paper

    HI-Q - Ashless Cellulose & Carbon Impregnated Filter Paper

    Ashless Cellulose Filter Paper such as the Whatman 41 series is commonly used in quantitative analytical techniques such as gravimetric analysis. E.G.: To convert precipitate to a stable weighing form, a chemist may wish to ignite the filter paper containing collected precipitate in a pre-weighed crucible, thereby removing the filter paper with minimal and uniform residual “ash”. Cellulose paper is also commonly...

  • HI-Q - Glass Fiber Filter Media

    HI-Q - Glass Fiber Filter Media

    Glass fiber filter media is made from 100% micro-fine borosilicate glass fibers. Glass fiber filters are used where high flow rate and micron/sub-micron filtration is required. The filter media can be used for both liquid and air filtration. In the highest purity form, HI-Q offers a binderless “AE” grade glass filter media. With its’ excellent purity, using the FPAE-XX series filter paper reduces the overall...

  • HI-Q - Model AGX Series - Silver Impregnated Zeolite Cartridge

    HI-Q - Model AGX Series - Silver Impregnated Zeolite Cartridge

    The “AGX” Series, Silver impregnated Zeolite Cartridges contain a highly efficient inorganic adsorbent for the collection and removal of elemental and organic forms of radioactive Iodine. Laboratory test indicate that radioactive Xenon, Krypton, and other Noble Gases are not retained to any significant degree by Silver impregnated Zeolite cartridges (approximately 1/15,000th, or less, than that retained by activated Carbon). The...

  • HI-Q - Model TC Series - TEDA Impregnated Carbon Cartridges

    HI-Q - Model TC Series - TEDA Impregnated Carbon Cartridges

    TEDA (triethylene di-amine) impregnated Carbon filter media has a high affinity for the adsorption, chelation and retention of the various species of Iodine. The HI-Q Environmental Products Company manufactures a number of configurations of activated carbon cartridges to fit almost all industry standard cartridge holders. The most common size in the industry is the 2¼” dia. x 1” thick unit. These are HI-Q’s...

  • Air Sampler Filter Media

    Carbon & Silver Zeolite Cartridges. Filter Paper for Air Sampling.

  • HI-Q - Ashless Cellulose & Carbon Impregnated Filter Paper

    HI-Q - Ashless Cellulose & Carbon Impregnated Filter Paper

    Ashless Cellulose Filter Paper such as the Whatman 41 series is commonly used in quantitative analytical techniques such as gravimetric analysis. E.G.: To convert precipitate to a stable weighing form, a chemist may wish to ignite the filter paper containing collected precipitate in a pre-weighed crucible, thereby removing the filter paper with minimal and uniform residual 'ash'. Cellulose paper is also commonly used for smears or swipes. Cellulose...

  • Hi-Q - Model AGX-Series - Radioactive Iodine - Silver Impregnated Zeolite Cartridges

    Hi-Q - Model AGX-Series - Radioactive Iodine - Silver Impregnated Zeolite Cartridges

    Nuclear Grade Carbon & Silver Zeolite Cartridges used for the assay of Radioiodine. For evaluation and documentation purposes, HI-Q has all of its individual batches/lots of TEDA Impregnated Carbon and Silver Impregnated Zeolite collection media tested by an outside certified testing laboratory, at multiple flow rates in the cartridge configuration. Samples of each mesh size and batch/lot are tested in the most common cartridge configuration over...

  • HI-Q - Model TC, TCAL & TCGA Series - TEDA Impregnated Carbon Cartridge

    HI-Q - Model TC, TCAL & TCGA Series - TEDA Impregnated Carbon Cartridge

    TEDA (triethylene di-amine) impregnated Carbon filter media has a high affinity for the adsorption, chelation and retention of the various species of Iodine. The HI-Q Environmental Products Company manufactures a number of configurations of activated carbon cartridges to fit almost all industry standard cartridge holders. The most common size in the industry is the 2¼' dia. x 1' thick unit. These are HI-Q's 'TC-Series' cartridges. This...

  • Instrument Weather Houses

  • HI-Q - Model WH-36 & WH-40 - Instrument Weather House

    HI-Q - Model WH-36 & WH-40 - Instrument Weather House

    HI-Q’s Instrument Weather House with its heavy gauge, primed and painted, aluminum body is ideal for protecting instruments from harsh outdoor sampling environments. The WH-36 & 40 series Instrument Weather Houses conveniently house and protect air sampling and other instrumentation. Two, large, 14” x 26” heavy duty piano hinged access doors allow an operator to conveniently mount and maintain instrumentation and equipment....

  • Outdoor High Volume Air Samplers

    HI-Q’s complete line of Outdoor High Volume Air Samplers are housed in clear-anodized aluminum outdoor shelters. These TSP-Series Samplers incorporate a maintenance-free, two or three stage centrifugal blower powered by either brushed or brushless variable speed, maintenance-free motors. The volumetric flow rate is controlled either manually or automatically by an electronic mass flow sensor that detects changes in the operators pre-set flow rate caused by changes in temperature, barom

  • HI-Q - Model 5000 & 4000 Series - Automatic Flow Control, 2 & 3 Stage Brushless Blower Retro-Fit Kit

    HI-Q - Model 5000 & 4000 Series - Automatic Flow Control, 2 & 3 Stage Brushless Blower Retro-Fit Kit

    HI-Q’s 5000 and 4000-Series 2 & 3 Stage Brushless Blower, Automatic Flow Control Retro-Fit Kits are intended to either upgrade existing mass flow control systems, or can completely convert existing standard Brushed & Brushless Manual Speed Control High Volume Air Samplers. HI-Q’s 5000 and 4000-Series Retro-Fit Kits include a 2 or 3 stage brush-less blower, mounted in series with a Mass Flow Sensor to a flat motor mount/support...

  • HI-Q - Model HVP-2000 Series - Two Stage Centrifugal Fan Type Brushed Blower

    HI-Q - Model HVP-2000 Series - Two Stage Centrifugal Fan Type Brushed Blower

    This unit is built around a two stage centrifugal fan type brushed blower. The tangential discharge exhaust allows a higher maximum flow rate than other similar types of units. To reduce motor winding burn out, the HVP-2000 has a separate motor cooling fan. Brush-life will range between 600 to 1,000 hours depending on sampling mo- tor speed. Motor brushes can be changed in the field within 15 to 20 minutes with a screwdriver.

  • HI-Q - Model HVP-3300BRL & HVP-3000BRL Series - High Volume Air Samplers

    HI-Q - Model HVP-3300BRL & HVP-3000BRL Series - High Volume Air Samplers

    These High Volume Air Samplers are housed in a clear-anodized aluminum outdoor shelter. The Brushless, two or three stage centrifugal fan blower can be used for particulate sampling with either a 4” diameter or 8” x 10” filter paper holder. The blower motor has a variable speed control feature which allows the operator to select a flow rate up to the capacity of the pump. Select the air sampler which best fits your needs:...

  • HI-Q - Model HVP-4300AFC Series & HVP-4200AFC - High Volume Air Samplers

    HI-Q - Model HVP-4300AFC Series & HVP-4200AFC - High Volume Air Samplers

    The HVP-4000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The units incorporate a maintenance-free, two or three stage centrifugal blower powered by a brushless, variable speed, maintenance free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is controlled by a programmable logic controller (PLC) that accepts an input from a mass or volumetric flow...

  • HI-Q - Model HVP-5300AFC & HVP-5200AFC - High Volume Air Samplers

    HI-Q - Model HVP-5300AFC & HVP-5200AFC - High Volume Air Samplers

    The HVP-5000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The unit incorporates a maintenance free, 2 or 3 stage centrifugal blower powered by a brushless, variable speed maintenance-free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is controlled by a programmable logic controller (PLC) that accepts an input from a mass or volumetric flow sensor...

  • HI-Q - Model PM10 Series - Size Selective High Volume Air Sampling Systems

    HI-Q - Model PM10 Series - Size Selective High Volume Air Sampling Systems

    The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 microns (mm). The standard has been deemed PM-10, particulate...

  • HI-Q - 7-Day Electronic Timer

    HI-Q - 7-Day Electronic Timer

    7-Day Electronic Timer; 24 hours x 7 days programming. 16 program steps and cycle operation. Two independent 15 A control circuits. Manual override switch for each output. Easy-to-read, large, 0.5 inch high LCD display. Wide operating voltage range. 10-year battery backup for memory protection. Panel and Surface mountable. Protective cover and custom mounting options available.

  • HI-Q - Model 2000-Series - Manual Flow Control High Volume Air Sampling TSP w/ Brushed Blowers

    HI-Q - Model 2000-Series - Manual Flow Control High Volume Air Sampling TSP w/ Brushed Blowers

    This variable speed High Volume Air Sampling unit is built around a two stage centrifugal fan type brushed blower. The tangential discharge exhaust allows a higher maximum flow rate than other similar types of units. To reduce motor winding burn out, the HVP-2000 has a separate motor cooling fan. Brush-life will range between 600 to 1,000 hours depending on sampling motor speed. Motor brushes can be changed in the field within 15 to 20 minutes with a...

  • HI-Q - Model 3000-Series - Manual Flow Control High Volume Air Sampling TSP w/ Brushless Blower

    HI-Q - Model 3000-Series - Manual Flow Control High Volume Air Sampling TSP w/ Brushless Blower

    These High Volume Air Samplers are housed in a clear-anodized aluminum outdoor shelter. The Brushless, two or three stage centrifugal fan blower can be used for particulate sampling with either a 4' diameter or 8' x 10' filter paper holder. The blower motor has a variable speed control feature which allows the operator to select a flow rate up to the capacity of the pump. Select the air sampler which best fits your needs: Choose the 2-stage, 250 watt...

  • HI-Q - Model 3500-Series - Automatic Flow Control High Volume Air Sampling TSP w/ Brushless Blowers

    HI-Q - Model 3500-Series - Automatic Flow Control High Volume Air Sampling TSP w/ Brushless Blowers

    These high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The units incorporate a maintenance-free, two or three stage centrifugal blower powered by a brushless, variable speed, maintenance-free motor. The motor is controlled by an electronic mass flow sensor that detects changes in the operators pre-set flow rate caused by changes in temperature, barometric pressure, and pressure drop due to dust loading on filter...

  • HI-Q - Model 4000-Series - High Volume Air Sampler with Communication Options

    HI-Q - Model 4000-Series - High Volume Air Sampler with Communication Options

    The HVP-4000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The units incorporate a maintenance-free, two or three stage centrifugal blower powered by a brushless, variable speed, maintenance free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is controlled by a programmable logic controller (PLC) that accepts an input from a mass flow sensor mounted in the...

  • Portable High Volume Air Samplers

    HI-Q’s line of Portable Air Sampling Systems are ideal for radioiodine and particulate grab & continuous duty air sampling. The light weight CF-Series air samplers are packaged in rugged aluminum enclosures weighing less than 10 pounds each. Their light weight yet durable frame allows a single operator to transport, set up, and take a sample quickly in almost any conditions. Order the unit which best fits your needs….

  • HI-Q - Model CF-900 Series (NRTL) - Low Cost, Portable HI-Vol Air Sampler

    HI-Q - Model CF-900 Series (NRTL) - Low Cost, Portable HI-Vol Air Sampler

    This Low-Cost/High-Performing Air Sampling System is ideal for radioiodine and particulate grab & continuous duty air sampling. The CF-900 Series air samplers are packaged in rugged aluminum enclosures weighing less than 10 pounds. Its' light weight yet durable frame allows a single operator to transport, set up, and take a sample quickly in almost any conditions. Order the unit which best fits your needs; specify desired flow range, volumetric...

  • HI-Q - Model CF-970T Series - Timer Controlled, Portable HI-Vol Air Sampler

    HI-Q - Model CF-970T Series - Timer Controlled, Portable HI-Vol Air Sampler

    The CF970T-Series Air Samplers provide sampling time ranges from 0.01 seconds to 9999 Hours. Time ranges and operating modes are selected by front panel programming. There are eleven programmable time ranges and six programmable operating modes (i.e.: delay, interval, single shot…). The programmable versatility makes the CF-970T ideal for grab and intermittent assay of particulate and radioiodine. Specify intended filter media type...

  • HI-Q - Model CF-1000BRL Series - Brushless Motor, Portable HI-Vol Air Sampler

    HI-Q - Model CF-1000BRL Series - Brushless Motor, Portable HI-Vol Air Sampler

    This Portable, Maintenance-Free, Variable Speed, High Volume Air Sampling System is ideal for continuous or intermittent sampling. The “CF-1000BRL” air sampler series have three flow ranges from which to choose. The standard CF-1001BRL unit includes a 1½” female straight-pipe fitting, which accepts all “CF” Series holders (excluding the CFPH-810), and is calibrated with a flow range of 2 to 8 CFM. The standard...

  • HI-Q - Model TFIA Series - Low Cost, Portable HI-Vol Air Sampler

    HI-Q - Model TFIA Series - Low Cost, Portable HI-Vol Air Sampler

    This low cost pump is ideal for indoor or outdoor sampling of Air Pollutants such as Radioactive Particulate. The standard TFIA unit comes complete with a rotometer scaled up to 70 CFM and a 4” diameter filter holder assembly which accepts the “CF” series 8” x 10” paper only holders.

  • Replacement & Spare Parts List For Air Sampler

    Need spare parts or rebuild kits for an air sampler? Follow the following links to a spare parts list for all cataloged products.

  • Size Selective Particulate Sampling Inlets

    HI-Q’s line of Size Selective Inlets sample suspended particulate in the air at a flow rates from as low as 16 LPM to as high as 40 CFM. The air is accelerated through multiple internal nozzles toward a greased collection plate. Due to momentum, the larger particles cannot negotiate the air stream turn, thereby colliding and adhering to the collection plate. By calculating and adjusting flow rate and stopping distances, smaller particles can be carried through and collected on pre-weig

  • HI-Q - Radiation Kinetic Impactor Inlets

    HI-Q - Radiation Kinetic Impactor Inlets

    HI-Q Environmental Products Company's AK-Series adjustable Annular Kinetic Impactor Heads are designed for collecting alpha, beta, & gamma-emitting contaminants, plutonium fission, Radon decay products and size specific dust particles. By adjusting the stopping distance (nozzle to impactor plate distance) and varying the particle velocities an operator can collect size specific dust particles. The AKI is currently being used in the field at 30 CFM...

  • HI-Q - Model PM-2.5 - Particulate Sampling Inlets with Filter Holder

    HI-Q - Model PM-2.5 - Particulate Sampling Inlets with Filter Holder

    HI-Q Environmental Products Company's, EPA Designed, PM-2.5 Sample inlet operates on the same principles of particulate impaction as the PM10-INLET described above. Air is drawn into the omnidirectional inlet head at a flow rate of 16.67 LPM. The air is then accelerated toward the first impaction stage where particulate with aerodynamic diameters greater than 10mm are collected (filtered out). The air stream, carrying particulate 10 microns and...

  • HI-Q - Model PM-10 - Particulate Selective Sampling Inlets

    HI-Q - Model PM-10 - Particulate Selective Sampling Inlets

    HI-Q Environmental Products Company's High Volume PM-10 Size Selective Inlet samples suspended particulate in the air at a flow rate of 40 CFM through its omnidirectional head. The air is then accelerated through multiple internal nozzles toward a greased collection plate. Due to their larger momentum, particles greater than 10 microns cannot negotiate the air stream turn, thereby colliding and adhering to the collection plate. Due to the...

  • Stack & Fume Hood Sampling

    HI-Q's product line includes complete stack sampling systems, consisting of a specified type of probe, in-line filter holder, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q is able to make stack-sampling system design suggestions by receiving your sampling requirements and operating conditions.

  • HI-Q - Gas Sampling & Isokinetic Sampling Probes

    HI-Q - Gas Sampling & Isokinetic Sampling Probes

    HI-Q Environmental Products Company's product line includes complete stack sampling systems, consisting of a specified type of probe, in-line filter holder, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q Environmental Products Company is able to make stack-sampling systems design suggestions by receiving your sampling requirements and operating conditions.

  • HI-Q - Stack Sampling System Design

    HI-Q - Stack Sampling System Design

    HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard protocol for sampling their effluent. Possible emission of radionuclides to the general public has to be...

  • Health Physics and Measurement Instruments

  • HI-Q - Model PAM Series - Radiation Portable Activity Meters

    HI-Q - Model PAM Series - Radiation Portable Activity Meters

    The PAM series of portable meters are compact,lightweight, hand-held instruments used to measure surface contamination from alpha, beta, and gamma activity. Low maintenance scintillation detectors are used to measure the contamination. Dual phosphor detectors with electronics are available for discrimination of alpha from beta activity.

  • HI-Q - Model MK-30 - Sample Analysis Monitoring Chamber

    HI-Q - Model MK-30 - Sample Analysis Monitoring Chamber

    The MK-30 Sample Analysis Monitoring Chamber is used with a PC computer to provide measurements of swipe (smear) samples, evaporation samples, and air filters. The MK-30 has a shielded chamber to reduce background and increase measurement sensitivity. Various detectors can be used, for specific applications such as beta,gamma, and alpha/beta measurements.

  • HI-Q - Radiation Hand/Foot Contamination Monitors

    HI-Q - Radiation Hand/Foot Contamination Monitors

    VF’s line of Hand/Foot Contamination Monitors is used to measure the alpha, beta, and gamma contamination on hands and feet. Different types and thicknesses of smart scintillation detectors are used to determine the type of radiation measured and the sensitivity of thedetectors. Using dual phosphors, the discrimination of alpha from beta activity is available. A user friendly touchscreen display and voice prompts are used to step the...

  • HI-Q - Model SKDP Series - Small Item Gamma Contamination Monitors

    HI-Q - Model SKDP Series - Small Item Gamma Contamination Monitors

    VF’s SKDP series of small item contamination monitors can measure gamma contaminations on small objects that can fit in the standard 12.6-in by 9-in by 9-in (32.0-cm. by 22.9-cm. by 22.9-cm) measurement chamber. Optional measurement chamber sizes are available. Visual and audible alarms provide an indication of contamination above a preset limit and the level of contamination is displayed as a percent of the preset alarm limit. The SKDP is...

  • HI-Q - Model FloorScan Series - Radiation Floor Contamination Monitors

    HI-Q - Model FloorScan Series - Radiation Floor Contamination Monitors

    The FloorScan series of monitors are used to measure the alpha, beta, and gamma contamination on floors. Low maintenance smartscintillation detectors are used to measure the contamination. Dual phosphor detectors with electronics are available for discrimination of alpha from beta activity. Versions with one or two 81.4-in2 (525 cm2) active area detectors are available.

  • Radiation Monitors

  • HI-Q - Model RADNET - Radiation Monitor - Airborne Radioactivity Monitoring System

    HI-Q - Model RADNET - Radiation Monitor - Airborne Radioactivity Monitoring System

    The RADNET monitor is equipped with an integrated dual detector that measures beta and gamma pacticulate isotopes deposited on a filter paper by means of a multi-processing technique. The beta detector is a rugged, ion-implanted, silicon detector with 600mm2 of sensitive surface area coupled to a charge pre-amplifier and processor-based MCA module that is able to detect and measure beta radiation. The gamma detector is a 2”x2” NaI(TI)...

  • HI-Q - Model AGM-02 - Gamma Area Monitor - Airborne Radioactivity Monitoring Systems

    HI-Q - Model AGM-02 - Gamma Area Monitor - Airborne Radioactivity Monitoring Systems

    The AGM-02 gamma area monitor is used to monitor gamma dose rate in a room. It can be used as either an independent radiation monitor or can be integrated into a system that monitors the radiation in several rooms of a building from a central location. It is a cost-effective solution that consists of a Geiger-Müller tube detector and integrated display. It measures the exposure rate, displays the measurement, and has visual and audible alarms. It...

  • HI-Q - Model MDG-0X Series - Gamma Area Detector - Airborne Radioactivity Monitoring System

    HI-Q - Model MDG-0X Series - Gamma Area Detector - Airborne Radioactivity Monitoring System

    The MDG-0X series of Gamma Area Detectors are used to measure gamma exposure rates in an indoor or outdoor environment. These detectors can be used for measuring from natural background to one hundred R/hr. These detectors can be used with local display and alarm units as a stand-alone monitor or can be integrated into a system that can monitor the radiation in multiple locations from a central station.

  • HI-Q - Model LZJ-22 - Local Display Unit - Airborne Radioactivity Monitoring Systems

    HI-Q - Model LZJ-22 - Local Display Unit - Airborne Radioactivity Monitoring Systems

    The LZJ-22 provides display of the AGM-02 Gamma Area Monitor and MDG-0X detector measurements and alarm status’. It can display the measurement of up to eight monitors/detectors and maintains the historical data and statuses for each monitor/detector. A user friendly touch screen display is used to modify basic measurement parameters. The LZJ-22 can be used as a stand-alone interface for multiple monitors/detectors or can be a data concentrator...

  • HI-Q - Model ASU-50 - Local Alarm Unit - Airborne Radioactivity Monitoring System

    HI-Q - Model ASU-50 - Local Alarm Unit - Airborne Radioactivity Monitoring System

    The ASU-50 is a local visual and audible alarm unit that is used with the AGM-02 Gamma Area Monitor and the MDG-0X detector to provide full alarm capabilities for a single monitor/detector. The ASU-50 provides indication of the operating status of the monitor/detector, two visual alarm lamps, and an audible alarm horn with horn acknowledge button. The lamps can be illuminated by the lamp test button. The ASU-50 can be directly connected to a...

  • Radiation Measurement Instruments

  • HI-Q - Model FCM-02 and SFP - Contamination Monitor

    HI-Q - Model FCM-02 and SFP - Contamination Monitor

    The FCM-02 Contamination Monitor is used to measure the surface contamination of workers, their clothing, and equipment. Scintillation detectors are used to measure the alpha, beta, and gamma surface activity. The SFP series of smart frisking probes are used to detect the surface contamination. The SFP series probe has a standard active area of 15.5 in squared (100 cm squared) and can be provided with dual phosphors for discrimination of alpha...