Hitema International

34 products found

Hitema International Products

  • Customized Products

  • Hitema - Model ENRF.008 - Free-Cooling Liquid Chiller

    Hitema - Model ENRF.008 - Free-Cooling Liquid Chiller

    Free-Cooling liquid chiller ENRF.008 for ELECTRIC CAR RECHARGE STATION. Working range from -30 ° C up to 55 ° C ambient. Other feautures: hydraulic circuit in non-ferrous material with plate evaporator and pump, power supply 230V/1/50Hz.

  • Hitema - Model TFV.250 - Air-Cooled Liquid Chiller

    Hitema - Model TFV.250 - Air-Cooled Liquid Chiller

    Air-Cooled liquid chiller Model TFV.250 with oil free TURBOCOR compressor (1 x TT300), falling film evaporator, no. 4 high performance, Ec Fans with AXITOP diffuser for axial fans and high efficiency condenser coil v-configuration (available also with epoxy painted microchannel condenser coils).

  • Hitema - Model LCT.010 - Chiller for Laser Application

    Hitema - Model LCT.010 - Chiller for Laser Application

    Directly from our carpentry department, HITEMA is proud to present its new Chiller for laser application in operation. The perfect functioning of our new laser cutting machine is possible thanks to our new chiller MODEL LCT.010, specifically designed to be connected to Laser Cutting Machines. This Chiller has been designed to ensure continuity of operation while maintaining perfect temperature control. The new HITEMA Chiller Series for Laser...

  • Hitema - Model ENR.061 - Air-Cooled Liquid Chiller

    Hitema - Model ENR.061 - Air-Cooled Liquid Chiller

    Air-Cooled liquid chiller ENR.061 with additional tank of 410 liters. Double refrigerant circuit, hydraulic circuit in non ferrous material, coaxial evaporator in stainless steel, low water temperature kit, electronic expansion valves.

  • Hitema - Model HYD 800L - Hydro-Module Series

    Hitema - Model HYD 800L - Hydro-Module Series

    Hydro-module series HYD that can be associate to the entire Hitema range of products. Available in a lot of different configurations. Tank available sizes from 300liter up to 3000liters, in carbon steel material (standard) or in stainless steel as option. Pump configurations: single pump (standard) or duplex pump, both configurations can mount 3bar pump/s, 5bar pump/s, or special prevalence on request. All the pumps can be associated to VFD drive....

  • Hitema - Model NOVAF.973 - Air-Cooled Screw Chillers

    Hitema - Model NOVAF.973 - Air-Cooled Screw Chillers

    Air-cooled screw chillers with integrated free-cooling and intelligent adiabatic evaporative pre cooling system. The refrigerant used is R134A. This Unit is designed for data center application. HITEMA with its range of product solutions is able to develop and design Units suitable for this particular application, with attention to the continuity of work of the Chillers, studying solutions to save energy costs.

  • Hitema - Model CWB2.990 - Inverter Driven Screw

    Hitema - Model CWB2.990 - Inverter Driven Screw

    Those units are provided of two refrigerant circuits with one partial #desuperheater (which provide water at 40°C) and one #economizer per circuit which assure a high #efficiency. Inverter driven screw compressors allows a smooth regulation which results in a low and stable leaving water temperature (-6°C) suitable for this specific application.

  • Hitema - Model SBSF.145-R1234ze - Freecooling Liquid Chiller

    Hitema - Model SBSF.145-R1234ze - Freecooling Liquid Chiller

    Freecooling liquid chiller with low GWP refrigerant, screw compressor and shell and tube evaporator. Ambient temperature 100% free-cooling at 0,5°C. With this refrigerant there isn’t any limitation from F-GAS regulation, in fact it is a great ecological substitute of R134a with GWP close to 1, and atmospheric lifetime estimated in 18 days (much lower of the 13 years of R134). It offers a very wide range of working area and the management of...

  • Hitema - Model PRP-MT.150 - Aircooled Liquid Chiller

    Hitema - Model PRP-MT.150 - Aircooled Liquid Chiller

    Aircooled liquid chiller with low GWP refrigerant, two independent refrigerant circuits with low charges. Application for cooling a glycol secondary circuit to control the internal temperature of industrial chambers.

  • Hitema - Model EWB3.1900 - Water-Cooled Liquid Chiller

    Hitema - Model EWB3.1900 - Water-Cooled Liquid Chiller

    Water-Cooled liquid chiller EWB3.1900 with 3 frigorific circuits, inverter driven Bitzer screw compressors model CSVH37-240Y, special footprint dimensions 5000mm x 2200mm, chiller demontable for the lifting operetions in 2 parts each of less of 4000kg.

  • Hitema - Model ISV.910 - Air-Cooled Liquid Chiller

    Hitema - Model ISV.910 - Air-Cooled Liquid Chiller

    Air-Cooled liquid chiller ISV.910 with double hydraulic circuit and single power supply. The two units work as 4 indipendent units each of them composed by one inverter driven screw compressor and individual shell and tube evaporator. Other features: harmonics filters, compressors sound enclosure, metallic protection grids at the condensenser

  • Hitema - Model ENW.700 - Water-Cooled Liquid Chiller

    Hitema - Model ENW.700 - Water-Cooled Liquid Chiller

    Water-Cooled liquid chiller ENW.700 with marine condensers with cupro-nickel tubes. Triple refrigerant circuit with 2 compressors per circuit and 6 partializzation steps, super low noise version composed by compressors jackets plus compressors enclosure, master-slave configuration

  • Hitema - Model ENRC.280 - Condenserless Chiller

    Hitema - Model ENRC.280 - Condenserless Chiller

    Condenserless chiller ENRC.280 for indoor installation, with open frame 800mm of width able to pass through a door. Chiller without tank and with double pump, with two plate evaporators and with compressors jackets to reduce the noise level .

  • Hitema - Model ENR.045 - Air-Cooled Liquid Chiller

    Hitema - Model ENR.045 - Air-Cooled Liquid Chiller

    Aircooled liquid chiller ENR.045 with single recirculating pump (PR) + single process pump of 8bar (P8), hydraulic circuit in non ferrous material and brazed plate evaporator (B-ES.SST), shut-off valve on pumps suction (VTP), electronic fan speed control (cut-phase) (RV), visual and acustic allarm (VAL), external automatic by-pass (BPA).

  • Hitema - Model ECF.630 - Freecooling Liquid Chiller

    Hitema - Model ECF.630 - Freecooling Liquid Chiller

    Freecooling liquid chiller ECF.630 with double refrigerating circuit, double hydraulic circuit and double power supply. Each hydraulic circuit with double pump and hydraulic connections on the opposite side than standard unit. Ambient temperature 100% free-cooling at -6,8°C .

  • Hitema - Model ENR.200 - Aircooled Liquid Chiller

    Hitema - Model ENR.200 - Aircooled Liquid Chiller

    Aircooled liquid chiller ENR.200 designed for maximum ambient temperature 55°C: electrical box IP55 with air/liquid cooler, oversized condenser coil, refrigerant R134a. Hydraulic circuit in non ferrous material with plate evaporators. Electronic expansion valves.

  • Hitema - Model ENRF.130 - Free-Cooling Chiller

    Hitema - Model ENRF.130 - Free-Cooling Chiller

    Free-cooling chiller ENRF.130, installed in an acid enviroment: all piping and all the ferrous surfaces epoxy coated, electrical box IP55 with air/liquid cooler. CRN approval for the evaporator and power supply 575V/3ph/60Hz. Ambient temperature 100% free-cooling at 5°C.

  • Hitema - Model ENW.200 - Water-Cooled Chiller

    Hitema - Model ENW.200 - Water-Cooled Chiller

    Water-cooled chiller ENW.200 for indoor installation, with open frame 3355mm of length instead of the standard length of 4355mm. Chiller without tank and without pump, with two plate evaporators and with two plate contenders each with 3-ways pressostatic control valves.

  • Hitema - Model EEF.1210 - Free-Cooling Chiller

    Hitema - Model EEF.1210 - Free-Cooling Chiller

    Free-cooling chiller EEF.1210 with adiabatic system, inverter regulated fans, ASME evaporator, double electrical box, power supply 460V/3ph/60Hz UL. Ambient temperature 100% free-cooling at -15,5°C; altitude of installation = 2500m.

  • Hitema - Model ECWS.270 - Water-Cooled Chiller

    Hitema - Model ECWS.270 - Water-Cooled Chiller

    Water-cooled chiller ECWS.270 with reciprocating compressors, ASME evaporator, special ASME condenser with cupro-nickel tubes, power supply 575V/3ph/60Hz UL, antiseismic configuration.

  • Hitema - Model ENW.700 - Water-Cooled Liquid Chiller

    Hitema - Model ENW.700 - Water-Cooled Liquid Chiller

    Water-Cooled liquid chiller ENW.700 with marine condensers with cupro-nickel tubes. Triple refrigerant circuit with 2 compressors per circuit and 6 partializzation steps, super low noise version composed by compressors jackets plus compressors enclosure, master-slave configuration.

  • Hitema - Model SBSF.330 - Free Cooling Liquid Chiller

    Hitema - Model SBSF.330 - Free Cooling Liquid Chiller

    Free Cooling liquid chiller SBSF.330 with power supply 208V/60Hz and personalized grids at protection of the refrigerant circuit and condenser. EC fans, ASME evaporator, UL approved components. Ambient temperature 100% free-cooling at -0,8°C.

  • Hitema - Model ENR.003/SP - Air Cooled Liquid Chiller

    Hitema - Model ENR.003/SP - Air Cooled Liquid Chiller

    Air Cooled liquid chiller ENR.003 for OEM customers. Working range from -10°C up to 55°C ambient. Hydraulic circuit in nonferrous material with plate evaporator and pump, cut phase fan speed regulator, customized dimensions, support brackets and eye bolts for lifting for installation at wall, double working frequency 50Hz/60Hz.