8 products found

HydroThane STP BV Products

• Biogas Treatment & Utilization

• 

  HydroThane STP - Model BSP - Biological Desulphurization Process System

  HydroThane STP BSP stands for Biological deSulphurization Process and is a simple biological process that removes hydrogen sulphide H2S from the biogas without the use of chemicals.The biogas is fed into vertical column(s) with a packing media in counter current flow, the BSP process can be seen as a combination of a conventional chemical scrubber and a biological trickling filter.

• 

  HydroThane - Model WSP - Water Desulphurization Process System

  HydroThane WSP (Water deSulphurization Process) removes H2S from the biogas by utilizing the available activated sludge from the aerobic treatment stage. The activated sludge will wash the biogas in counter flow, absorbing the H2S from the gas phase (H2S-rich) into the water phase.

• Anaerobic Technology

• 

  HydroThane STP - Model ECSB - External Circulation Sludge Bed Process System

  With the development of the ultra high rate HydroThane STP ECSB ('Easy as Be' - External Circulation Sludge Bed) process, 2nd generation EGSB, HydroThane has created the opportunity for customers to treat their effluent within limited available space and close to urban areas. The HydroThane STP ECSB design has eliminated noise and odor related issues that were present in other older anaerobic processes.

• 

  HydroThane STP - Model UASB - Upflow Anaerobic Sludge Blanket Process System

  The HydroThane STP UASB (Upflow Anaerobic Sludge Blanket) process is the most commonly applied anaerobic technology for the biological treatment of industrial effluents. The first UASB pilot plant was installed at a beet sugar refinery in The Netherlands (CSM Suiker) in the 1970's. Thereafter, a large number of full scale UASB plants were installed throughout The Netherlands at sugar refineries, potato starch processing plants and other food...

• 

  HydroThane - Model SWD - Solid Waste Digestion Process System

  The HydroThane STP SWD (Solid Waste Digestion) process is based on the CSTR (Continuous Stirred Tank Reactor) technology. The SWD process is mostly used for waste reduction and green energy production and is a robust, proven process which treats industrial effluents with significantly high amounts of suspended solids.

• 

  ADI-AnMBR - Anaerobic Membrane Bioreactor

  The ADI-AnMBR process is a high rate anaerobic process that uses a submerged membrane barrier to perform the gas-liquid-solids separation and reactor biomass retention function. This near-absolute barrier to solids ensures efficient system operation and stability, even under high organic loading and intense mixing scenarios.

• Aerobic Technology

• 

  Hydrox - Aerobic Treatment Process System

  The HYDROX process is based on a signal from an Oxidation Reduction Potential (ORP) sensor which establishes the oxygen request to achieve optimum (de-)nitrification cycles. Pulse mixing of the aerobic reactor takes place according to timers in order to maintain the activated sludge in suspended stage as long as there is not an additional request for oxygen. For the application of the HYDROX process only 1 tank is necessary, while no additional...

• 

  DeAmmon - Nitrogen Removal System

  DeAmmon is nitrogen-reduction process developed for nitrogen removal from high concentrated streams such as industrial waste water and sludge dewatering supernatant from digested wastewater sludge. The great advantages of the DeAmmon process compared to the conventional nitrogen removal are the significantly lower oxygen consumption and conversion to gaseous nitrogen without organic carbon.