IC Controls Ltd.

25 products found

Products

  • pH/ORP

    pH is a short form for the power (p) of Hydrogen (H), which is a way of expressing the measurement of the hydrogen ion concentration. The pH scale is used to express how acidic or basic a solution is. ORP stands for “Oxidation Reduction Potential”. Measured in millivolts, ORP indicates the degree to which one chemical will oxidize or reduce another chemical. If one substance causes another to lose electrons, it is said to be an oxidizing agent whereas if it causes another substan

  • IC Controls - Model 210-P - Industrial pH/ORP Analyzer

    IC Controls - Model 210-P - Industrial pH/ORP Analyzer

    The industrial pH analyzer model 210-P from IC Controls gives you maximum flexibility, reliability, and ease of use. The pH measurement can be critical to your process and must be strictly monitored and maintained. The 210-P was designed for the highest accuracy and performance standards. The 210-P has two assignable 4-20 mA outputs for trending any measurement or for optional PID control. In addition the 210-P offers optional digital communications....

  • IC Controls - Model 653-9M - Two-Wire Explosion Proof Transmitter

    IC Controls - Model 653-9M - Two-Wire Explosion Proof Transmitter

    IC CONTROLS has incorporated microprocessor technology into the two-wire transmitters. pH and ORP measurement can be critical to your process and must be strictly monitored and maintained. Analyzer intelligence goes beyond measurement and control, providing the user with calibration data including sensor cell constant, range and diagnostics. Information can be communicated for trending or advanced control, even to remote locations. Ultimately, the...

  • IC Controls - Model 602 - Light Industrial pH Sensor

    IC Controls - Model 602 - Light Industrial pH Sensor

    The 602 pH sensor is constructed from PVC, with the sensor fully encapsulated for outstanding reliability on submersion applications. It mounts on a ¾ inch NPT thread in the end of a 1 inch support pipe, or can be suspended from its lead. The unique IC Controls “cushion mounted” pH electrode design is used with a large plug resistant, two-stage junction to give fast response and long life. If you are experiencing short electrode...

  • IC Controls - Model 653 - Two-Wire pH / ORP Transmitter

    IC Controls - Model 653 - Two-Wire pH / ORP Transmitter

    IC CONTROLS has incorporated microprocessor technology into the two-wire transmitters. pH and ORP measurement can be critical to your process and must be strictly monitored and maintained. Analyzer intelligence goes beyond measurement and control, providing the user with calibration data including sensor cell constant, range and diagnostics. Information can be communicated for trending or advanced control, even to remote locations. Ultimately, the...

  • IC Controls - Model 650 - Economical Two-Wire pH Transmitter

    IC Controls - Model 650 - Economical Two-Wire pH Transmitter

    IC CONTROLS brings you economy in a two-wire microprocessor transmitter. The 50-series microprocessor makes these transmitters flexible and easy to use. The transmitter is easy to install in a surface-mounting 10x10x10 cm (4x4x4 inch) size NEMA 4X (IP 65) water-shedding and corrosion-resistant plastic case, which can be supplied with pipe- or panel-mount kits.

  • IC Controls - Model 642 - Process Combination pH or ORP Sensor

    IC Controls - Model 642 - Process Combination pH or ORP Sensor

    The IC Controls model 642 pH sensor is a low-cost solution to traditional leakage problems associated with submersible pH sensors. The sensor assembly is designed to work with the electronics package located in a junction box above the liquid level. The assembly is completely encapsulated and comes with a standard 3 meter (10 foot) lead. This setup achieves a reliability not previously associated with submersion pH measurement.

  • IC Controls - Model 603 - pH/ORP Sensor for Municipal Applications

    IC Controls - Model 603 - pH/ORP Sensor for Municipal Applications

    The 603 pH or ORP sensor body is made of polypropylene, with the electrode fully encapsulated for outstanding reliability on submersion applications. It mounts on a ¾ inch NPT thread in an insertion tee or fitting, and in the end of a 1' (2.54 cm) support pipe, or can be suspended from its lead. The IC Controls unique patented “solid polymer” pH reference design is used to give fast response and long life even with constantly...

  • IC Controls - Model 647 - pH Sensor

    IC Controls - Model 647 - pH Sensor

    This sensor is designed to survive in sulfides, cyanides and ammonia environments often found in Mines, Concentrators and Refineries. It is bigger and more rugged (shown in the left and right) than a conventional pH sensors (shown in the middle) and lasts 3 to 5 times longer. The patented 'solid polymer' pH reference design is used to give fast response and long life even with constantly fluctuating temperature, pressure, oily coatings and poisoning...

  • IC Controls - Model 606 SS - Ball Valve Retractable pH Sensor with Anti-Blowout Lip

    IC Controls - Model 606 SS - Ball Valve Retractable pH Sensor with Anti-Blowout Lip

    The IC Controls model 606 was designed to provide reliable pH measurement in demanding applications where pressure cannot be reduced to zero for electrode removal. The IC Controls models 605 and 617 also can handle the service. However, for safety reasons, some users prefer a positive anti-blowout lip that cannot pass through the insertion gland. The 606 provides that lip and optional safety lanyards for the ultimate double-safe design.

  • IC Controls - Model 615 - Pure-Water pH Sensor

    IC Controls - Model 615 - Pure-Water pH Sensor

    Benefits for Pure Water Measurement; Close spacing between sensor components sharply reduces high impedence and ion effects for stable pH readings. Small internals allow low-flow with fast pH response.

  • IC Controls - Model 643 - Low Pressure Ball Valve Retractable pH Sensor

    IC Controls - Model 643 - Low Pressure Ball Valve Retractable pH Sensor

    The IC Controls model 643 pH sensor is a low-cost solution to traditional leakage problems associated with submersible pH sensors. The sensor assembly is designed to work with the electronics package located in a junction box above the liquid level. The assembly is completely encapsulated and comes with a standard 3 meter (10 foot) lead. This setup achieves a reliability not previously associated with submersion pH measurement.

  • IC Controls - Model 614 - True-Union pH Sensor

    IC Controls - Model 614 - True-Union pH Sensor

    The model 614 true-union pH sensor is a downsized version of the model 642, offered in an easy-to-install configuration for insertion or submersion applications. The true-union style threaded fitting locks in the sensor for extra safety and very easy removal. Recommended for applications where frequent removal in tough application for calibration, cleaning or quality control checks is required.

  • IC Controls - Model 648 - pH Sensor for Aggressive High Temperature Processes

    IC Controls - Model 648 - pH Sensor for Aggressive High Temperature Processes

    Performance and Value Building upon the proven 642 platform, the 648 pH sensor incorporates IC Controls’ key high performance options as standard features to deliver maximum performance and value in difficult applications. By packaging these options together in an optimized design, we are able to provide our highest level of capability at a lower cost point than previously possible. In addition, robust preamp and quick-connection options are...

  • IC Controls - Model 600 - pH/ORP Interface in Explosion Proof Junction Box

    IC Controls - Model 600 - pH/ORP Interface in Explosion Proof Junction Box

    pH interface with preamplifier and terminations to minimize moisture and interference problems and provide field disconnect point f or 600 IC CONTROLS pH sensor with IC CONTROLS microprocessor analyzer. Includes wiring instructions and weatherproof /explosion proof UL & CSA junction box (for surf ace type J-box select option -71). Mounts on top of pH sensor or on support pipe via ¾ inch FNPT. Required when electrode is more than 30 m (100...

  • IC Controls - Model 627 - Quick-Union In-line pH Sensor

    IC Controls - Model 627 - Quick-Union In-line pH Sensor

    The model 627 quick-union in-line pH sensor is offered in an easy-to-install configuration for insertion or submersion applications. The union-style threaded fitting locks in the sensor for extra safety and very easy removal. This sensor is designed to survive in cyanide, sulfides and ammonia environments often found in mines, concentractors and refineries. It is bigger and more rugged than a conventional pH sensors.  The patented ‘solid...

  • IC Controls - Model 210-P(ORP) - Industrial ORP Analyzer

    IC Controls - Model 210-P(ORP) - Industrial ORP Analyzer

    The industrial ORP analyzer model 210-P(ORP) from IC Controls gives you maximum flexibility, reliability, and ease of use. The ORP measurement can be critical to your process and must be strictly monitored and maintained. The 210-P(ORP) was designed for the highest accuracy and performance standards. The 210-P(ORP) has two assignable 4-20 mA outputs for trending any measurement or for optional PID control. In addition the 210-P(ORP) offers optional...

  • IC Controls - Model 625 - Quick Union in Line pH Sensor

    IC Controls - Model 625 - Quick Union in Line pH Sensor

    The model 625 quick-union in-line pH sensor is offered in an easy-to-install configuration for insertion or submersion applications. The union-style threaded fitting locks in the sensor for extra safety and very easy removal. The model 625 sensor is recommended for applications where frequent removal in tough application for calibration, cleaning or quality control checks is required.

  • IC Controls - Model 607 - pH Sensor with Cartridge

    IC Controls - Model 607 - pH Sensor with Cartridge

    The 607 replaceable pH cartridge is constructed from 2 cm (¾ inch) schedule 80 PVDF pipe, with the sensor assembly fully encapsulated for outstanding reliability and economy on applications to 90°C (194°F).

  • IC Controls - Model 615-26 - Ultra Pure Water pH Sampling and Calibration System

    IC Controls - Model 615-26 - Ultra Pure Water pH Sampling and Calibration System

    Close spacing between sensor components sharply reduces high impedence and ion effects for stable pH readings. Small internals allow low-flow with fast pH response. Constant atmospheric head establishes steady pH sensor flow even as process pressure varies. Low ionic strength pH buffers minimize junction potential effects on calibration and speed return to on line sample pH.

  • IC Controls - Model 655-T-6-RENT - pH Rental System

    IC Controls - Model 655-T-6-RENT - pH Rental System

    Log your pH levels using an  IC Controls portable pH Analyzer, Model 655-T-6. Our precalibrated portable rental unit can handle your spot checks. This rental unit comes with both the analyzer and sensor mounted on a stainless steel stand. This stand fits into a sturdy wood carrying/shipping case which is 14' x 14' x 17', approx 45 lb.The Model 655-T-6 rental unit comes with quick connectors, IC Net-869 program CD and user manual, analyzer user...