8 products found
In-Situ Environmental Products
-
Water Monitoring System Accessories - Well Accessories
-
In-Situ - Expandable Locking Well Cap
The Expandable Locking Well Cap expands and seals when the lockable wing nut is turned. Available for 2, 3, 4, 6, and 8 inch wells. with a seal that expands as a lockable wing nut is turned. Available for 2, 3, 4, 6, and 8 inch ...
-
Well Cable Hanger for Expandable Locking Well Cap
Use the Well Cable Hanger with the TROLL Quick Link to secure your cable or suspension wire when using an Expandable Locking Well ...
-
In-Situ - Well Dock and Sleeve
The Well Dock and Sleeve creates a secure anchor point for cables and suspension wires at the top of a well. Available for 2, 4, and 6 inch ...
-
In-Situ - Vented Locking Well Cap
The Vented Locking Well Cap is made of nylon, available for 2 or 4 inch wells. Locks with a standard #1 padlock. The well cap creates a watertight compression seal. Installed using a mallet. 3 inches tall when installed. High impact and heat resistance, UV protected and chemically ...
-
In-Situ TROLL - Quick Link
Use the TROLL Quick Link with the Well Cable Hanger to secure your cable or suspension wire when using an Expandable Locking Well ...
-
In-Situ - Bailer
Bailers for straight-forward collection and visual examination of water samples in different environments. Available in PVC, Polyurethane (weighted), and biodegradable models, and in 0.7 x 36 in. and 1.5 x 36 in. sizes. 24 units per case. Samples are collected by gently lowering the bailer into the water column and allowing water to fill from the base upwards through a non-return ball valve. As the sample is retrieved the ball will sink to the bottom of ...
-
Slow Emptying Device (VOC Tips) for 1.5 inch Bailer
The Slow Emptying Device attaches to the end of 1.5 in. bailers producing a slow laminar flow when collecting a water sample from the bailer. Minimizes agitation to allow more accurate measurement of volatile organic compounds (VOCs). Typically used for collecting samples for VOC analyses into sample vials. Case of ...
-
In-Situ - Well Cap Cable Holder
The well cap cable holder creates a water- and air-tight seal between the top of the well and the instrument. The cable holder is an ideal accessory for use in soil vapor extraction applications. Pressure rating: 60 psi maximum at 20-25°C (68-77°F); 30 psi up to 50°C (122°F). 2.75 in. diameter at its widest point, 1.5 in. ...