INAQUA Vertriebsgesellschaft mbH

48 products found

products

  • Composite Pressure Tanks & Distribution Systems

    Composite Pressure Tanks & Distribution Systems

    High quality HDPE - fibre-free and good for all standard water treatment applications, including demineralisation. Filament wound epoxy / fibreglass outer laminate for top strength and performance. Precision molded threads or fibreglass flange for standard valves and fittings. Rated for 10 bars operating pressure at temperature of 50°C. All industry approvals NSF. tank connections available for tanks with top openings and top and bottom openings...

  • 30 inch to 63 inch Clack Corporation Industrial Pressure Tanks

    30 inch to 63 inch Clack Corporation Industrial Pressure Tanks

    30' to 63' Diameter, LLDPE liner with FRP reinforced outer shell. Offers pressure tanks from 30' to 63' diameter for Industrial water filtration and softening applications. Wave Cyber pressure tanks are made of high performance composite materials - LLDPE liner with FRP filament winding outer shell. Wave Cyber* s design provides a continuous seamless inner liner shell with a GF PP inlet for higher strength, temperature and pressure capabilities....

  • 14 inch to 24 inch C lack Corporat ion Industrial Pressure Tanks

    14 inch to 24 inch C lack Corporat ion Industrial Pressure Tanks

    14' to24' Diameter, PEIinerwith FRP reinforced outer shell. Offers pressure tanks from 14' to 24' diameter for commercial water filtration and softening applications. pressure tanks are made of high performance composite materials - HDPE liner with FRP filament winding outer shell. design provides a continuous seamless, inner liner shell with aGF PP inlet for higher strength, temperature and pressure capabilities.

Products by Avista Technologies, Inc.

  • Antiscalants - Wide Spectrum Inhibitors

    Vitec antiscalants and dispersants are multicomponent formulations that allow higher RO system recovery rates and reduce cleaning frequency. Our Vitec antiscalants inhibit scale while also dispersing colloidal particles. The inhibition and dispersant properties of Vitec products help extend system run times, reduce cleaning frequency and increase the productive life of RO elements. The Vitec 8000 series antiscalants are part of our Green Chemicals line, specially formulated for sites with di

  • Vitec - Model 5100 - Broad Spectrum Antiscalant and Dispersant Liquid

    Vitec - Model 5100 - Broad Spectrum Antiscalant and Dispersant Liquid

    Vitec 5100 is a broad spectrum, liquid antiscalant and dispersant that is compatible with organic coagulants and effective at low dose rates. This multicomponent formulation is targeted at preventing scale precipitation in larger systems and is particularly cost effective in seawater and municipal reverse osmosis (RO) applications. Vitec 5100 is compatible with our line of RoQuest coagulants and certified by NSF International under NSF/ANSI Standard...

  • Antiscalants - Inhibitors with Special Features

  • Vitec - Model 4000 - Liquid Antiscalant and Dispersant

    Vitec - Model 4000 - Liquid Antiscalant and Dispersant

    Vitec 4000 is a liquid antiscalant and dispersant that offers excellent silica scale inhibition and allows increased system recoveries in high silica feedwaters. This product is a multicomponent formulation that prevents silica scale precipitation at higher concentrations than typical antiscalants, a feature that may allow significantly increased membrane system recovery in high silica feedwaters. Vitec 4000 retains its performance even in reverse...

  • Vitec - Model 2000 - Liquid Antiscalant and Dispersant

    Vitec - Model 2000 - Liquid Antiscalant and Dispersant

    Vitec 2000 is a liquid antiscalant and dispersant designed for use in feedwaters that have a wide range of scaling challenges or where there is a high level of iron to be dispersed. Its dispersant qualities reduce colloidal and silt fouling of reverse osmosis (RO) and nanofiltration (NF) systems. This antiscalant can be used in a wide variety of feedwaters, including surface or well waters, as well as applications in seawater, brackish water and waste...

  • Antiscalants - Non-Phosphorus Containing

  • Vitec - Model 1000 - Liquid Antiscalant

    Vitec - Model 1000 - Liquid Antiscalant

    Vitec 1000 is a liquid antiscalant designed to inhibit scale in feedwaters where the potential for colloidal and silt fouling is low (e.g., groundwater applications). It contains a 35% by weight solution of polyacrylic acid that has a tight molecular weight range of 2000 and is compatible with all reverse osmosis (RO) membranes. This antiscalant can be injected neat or diluted to meet system requirements. Vitec 1000 has been certified by NSF...

  • Vitec - Model 8200 Green - Liquid Antiscalant and Dispersant

    Vitec - Model 8200 Green - Liquid Antiscalant and Dispersant

    Vitec 8200 liquid antiscalant and dispersant is free of phosphate and phosphonate. This all-polymer blend is compatible with all membrane types and is a multicomponent formulation that provides a broad spectrum of scale precipitation prevention. It is typically applied to seawater and brackish systems producing industrial water, requiring phosphorus-free product to meet discharge requirements. Vitec 8200 is approved for use in systems producing...

  • Antiscalants - Municipal or Potable Drinking Water

  • Vitec - Model 1100 - Liquid Antiscalant

    Vitec - Model 1100 - Liquid Antiscalant

    Vitec 1100 is a cost effective, liquid antiscalant designed to specifically inhibit calcium carbonate, metal oxides, silica, and mineral scale in municipal feedwaters where there is potential for concentrations of inorganic fouling. This antiscalant is compatible with the Avista RoQuest line of coagulants and may eliminate the need to inject acid. When used as recommended, Vitec 1100 will prevent scale formation and decrease the frequency of membrane...

  • Vitec - Model 1200 - Liquid Antiscalant

    Vitec - Model 1200 - Liquid Antiscalant

    Vitec 1200 is a liquid antiscalant designed with enhanced scale control to inhibit iron metal oxides, silica, and mineral scale in large capacity membrane systems. This antiscalant is highly effective in feedwaters where there are potential concentrations of inorganic fouling. This antiscalant is compatible with the Avista RoQuest line of coagulants and may eliminate the need to inject acid. When used as recommended, Vitec 1200 will prevent scale...

  • Vitec - Model 1400 - Liquid Antiscalant

    Vitec - Model 1400 - Liquid Antiscalant

    Vitec 1400 is a liquid antiscalant designed to inhibit calcium carbonate, calcium sulfate, metal oxides, silica, barium and strontium scale in municipal feedwaters where there is potential for high concentrations of inorganic fouling, or high hardness ground waters. This antiscalant is compatible with the Avista RoQuest line of coagulants and may eliminate the need to inject acid. When used as recommended, Vitec 1400 will prevent scale formation and...

  • Vitec - Model 1500 - Liquid Antiscalant

    Vitec - Model 1500 - Liquid Antiscalant

    Vitec 1500 is a liquid antiscalant designed to inhibit or reduce calcium fluoride, calcium sulfate, calcium carbonate, calcium phosphate, barium sulfate, and strontium sulfate scale. It is especially effective in feedwaters where there is potential for high concentrations of inorganic fouling such as waste water reclaim/ reuse. This antiscalant effectively stabilizes metal ions and disperses metal oxides in the reject and may eliminate the need to...

  • Vitec - Model 5000 - Liquid Antiscalant and Dispersant used to Control Scale

    Vitec - Model 5000 - Liquid Antiscalant and Dispersant used to Control Scale

    Vitec 5000 is a liquid antiscalant and dispersant used to control scale and inorganic fouling in a variety of feedwaters and pH ranges. It is a powerful inhibitor against carbonate and sulfate scales and disperses colloidal particles in reverse osmosis (RO) and nanofiltration (NF) membrane systems. Vitec 5000 has been approved for use in systems producing drinking water in the UK, conforming to DIN 15040.

  • Antiscalants - Coagulant Polymer Compatible

  • Vitec - Model 7000 - Multicomponent Liquid Antiscalant and Dispersant

    Vitec - Model 7000 - Multicomponent Liquid Antiscalant and Dispersant

    Vitec 7000 is a multicomponent liquid antiscalant and dispersant that provides a high level of sulfate inhibition and allows increased reverse osmosis (RO) system recoveries in challenging waters. It prevents calcium sulfate (CaSO4) scale precipitation, allowing up to 7 times saturation. The primary application of this product is brackish water or waste water rich in sulfate, which requires a specialty product for economic membrane system recovery. It...

  • Cleaners - Powder

    Our AvistaClean and RoClean formulations are proprietary, membrane compatible cleaners that provide efficient and cost-effective removal of all common foulants. AvistaClean and RoClean products come in a variety of pH ranges and include liquids or powders. Many are certified for use in potable water systems. They’re powerful against organic and inorganic foulants and compatible with all membranes. Several cleaners are classified as Green Chemicals to help Avista customers meet strict e

  • AvistaClean - Model P312 - High pH Powder Cleaner

    AvistaClean - Model P312 - High pH Powder Cleaner

    AvistaClean P312 powder is a multicomponent, high pH buffered cleaner formulated to remove a combination of organic and particulate foulants from reverse osmosis (RO) membranes. Its proprietary biodispersants remove silt, colloidal silica, clay, organic color and bioslime from membranes to help reduce high differential pressure. AvistaClean P312 is temperature compensated to maintain optimum pH over a wide temperature range and certified by NSF...

  • AvistaClean - Model P611 Green - High pH Powder Cleaner

    AvistaClean - Model P611 Green - High pH Powder Cleaner

    AvistaClean P611 powder is a multicomponent, high pH buffered cleaner that is free of phosphate and EDTA. It is effective against foulants commonly found in waste water reuse plants and landfill leachate systems, including hydrophobic organic foulants, bioslime, clay and colloidal silica. AvistaClean P611 is highly buffered to resist pH changes during the cleaning process, and is NSF certified for off-line use in drinking water systems. This cleaner...

  • RoClean - Model P111 - High pH Powder Cleaner

    RoClean - Model P111 - High pH Powder Cleaner

    RoClean P111 powder is a multicomponent, high pH buffered cleaner formulated to remove biological fouling, humic and fulvic acids, organics, colloidal material, and clays from reverse osmosis (RO) and nanofiltration (NF) membranes. Where powder is preferred, RoClean P111 is successfully applied to systems operating on seawater, brackish water and waste water. This product is temperature compensated to ensure that the cleaning solution remains in the...

  • RoClean - Model P112 - High pH Powder Cleaner

    RoClean - Model P112 - High pH Powder Cleaner

    RoClean P112 powder is a multicomponent, high pH buffered cleaner specifically formulated to remove silica scale safely from reverse osmosis (RO) membranes. This product is effective against silt and organic foulants such as colloidal silica, clay, organic color and bioslime. RoClean P112 is a much safer option for silica scale removal than hydrofluoric acid and ammonium bifluoride solutions, which are potentially hazardous.

  • RoClean - Model P303 - Multicomponent, Low pH Buffered Cleaner

    RoClean - Model P303 - Multicomponent, Low pH Buffered Cleaner

    RoClean P303 powder is a multicomponent, low pH buffered cleaner formulated to tackle all acid removable scales and foulants from reverse osmosis (RO) membranes, including metals and calcium carbonate. Where powder is preferred, RoClean P303 is successfully applied to systems operating on seawater, brackish water and waste water. This product is temperature compensated to ensure that the cleaning solution remains in the effective pH range regardless...

  • RoClean - Model P703 - Multicomponent, Low pH Buffered Cleaner

    RoClean - Model P703 - Multicomponent, Low pH Buffered Cleaner

    RoClean P703 powder is a multicomponent, low pH buffered cleaner formulated to remove metal foulants such as iron, manganese and aluminum from reverse osmosis (RO) membranes. It has also been particularly successful on metal fouled borehole water plants. This product is temperature compensated to ensure that the cleaning solution remains in the effective pH range regardless of variations in solution temperature. RoClean P703 is certified by NSF...

  • RoClean - Model P903 - Low pH Powderd Cleaner

    RoClean - Model P903 - Low pH Powderd Cleaner

    RoClean P903 is a low pH powdered cleaner designed to remove iron, manganese, and aluminum deposits from spiral wound polyamide and cellulose acetate elements. This formulation is temperature compensated to ensure that the cleaning solution remains in the effective pH range regardless of variations in solution temperature. RoClean P903 has been certified by NSF International under NSF/ANSI Standard 60 for use as an off-line cleaner in drinking water...

  • RoClean - Model P911 - High pH Powder Cleaner

    RoClean - Model P911 - High pH Powder Cleaner

    RoClean P911 powder is a multicomponent, high pH buffered cleaner formulated to remove particularly high levels of organics, including humic and fulvic acids from reverse osmosis (RO) membranes. This low foaming cleaner is effective against silt and organic foulants such as colloidal silica, clay, organic color and bioslime. RoClean P911 is temperature compensated to maintain optimum pH over a wide temperature range.

  • Cleaners - Liquid

    Our AvistaClean and RoClean formulations are proprietary, membrane compatible cleaners that provide efficient and cost-effective removal of all common foulants. AvistaClean and RoClean products come in a variety of pH ranges and include liquids or powders. Many are certified for use in potable water systems. They’re powerful against organic and inorganic foulants and compatible with all membranes. Several cleaners are classified as Green Chemicals to help Avista customers meet strict e

  • AvistaClean - Model L011 - High pH Liquid Cleaner

    AvistaClean - Model L011 - High pH Liquid Cleaner

    AvistaClean L011 liquid is a multicomponent, high pH buffered cleaner formulated to remove oil and grease that may be found in reverse osmosis (RO) systems used in waste water reuse applications. AvistaClean L011 is highly buffered to resist pH changes during the cleaning process, and contains a proprietary blend of buffers, low foaming surfactants and chelants to dissolve organic foulants and disperse colloidal particles.

  • RoClean - Model L211 - High pH Liquid Cleaner

    RoClean - Model L211 - High pH Liquid Cleaner

    RoClean L211 is a liquid multicomponent, high pH buffered, low foaming cleaner formulated to remove colloidal silica, clay, organic color and bioslime from reverse osmosis (RO) membranes. This cleaner is successfully applied to systems operating on seawater, brackish water and waste water where liquid cleaner is preferred. RoClean L211 is a highly effective foulant remover but gentle enough for daily application if required. RoClean L211 is...

  • RoClean - Model L212 Green - High pH Liquid Cleaner

    RoClean - Model L212 Green - High pH Liquid Cleaner

    RoClean L212 is an EDTA and Phosphate Free high pH, liquid cleaner formulated to remove silt and organic foulants including colloidal silica, clays, organic color, and bioslime from spiral wound polyamide elements. This product is especially effective in removing bioslime and solids in element feed spacers. RoClean L212 is certified by NSF International under NSF/ANSI Standard 60 as an off-line cleaner in drinking water systems.

  • RoClean - Model L403 - Low pH Liquid Cleaner

    RoClean - Model L403 - Low pH Liquid Cleaner

    RoClean L403 liquid is a multicomponent, low pH cleaner formulated to remove metal foulants and calcium carbonate scale from membranes. This cleaner is effective against iron, manganese and aluminum and is successful when applied to all acid removable scales and foulants. RoClean 403 is the premium product for systems operating on seawater, brackish water and waste water. RoClean L403 is certified by NSF International under NSF/ANSI Standard 60 for...

  • RoClean - Model L607 - Neutral pH Liquid Cleaner

    RoClean - Model L607 - Neutral pH Liquid Cleaner

    RoClean L607 liquid is a multicomponent cleaner formulated to remove organics and colloidal particles from membranes. This low foaming, neutral pH cleaner removes silt and organic substances such as colloidal silica, clay, organic color and bioslime from cellulose acetate membranes. RoClean L607 is temperature compensated to ensure that the cleaning solution remains in the effective pH range regardless of variations in solution temperature.

  • RoClean - Model L811 - High pH Liquid Cleaner

    RoClean - Model L811 - High pH Liquid Cleaner

    RoClean L811 liquid is a multicomponent, high pH buffered cleaner formulated to remove sulfate scales including barium, strontium and calcium sulfate from reverse osmosis (RO) and nanofiltration (NF) membranes. This product is temperature compensated to ensure that the cleaning solution remains in the effective pH range regardless of variations in solution temperature.

  • Biocides

    RoCide is a non-oxidizing, membrane compatible biocide to reduce biological fouling in membrane systems. RoCide biocides are broad spectrum formulations that combat contaminants such as bacteria, fungi and algae. They are compatible with all membranes and can be used with various Avista cleaners. Our biocides may be applied intermittently, via continuous injection or as a periodic addition to your clean-in-place (CIP) system.

  • RoCide - Model DB5 - Fast-Acting, Non-Oxidizing Biocide

    RoCide - Model DB5 - Fast-Acting, Non-Oxidizing Biocide

    RoCide DB5 liquid is a fast-acting, non-oxidizing biocide that degrades naturally and rapidly, making it a cost-effective method of eliminating contamination in compliance with strict discharge regulations. This formulation is based on a 5% solution of the active ingredient dibromo nitrilopropionamide (DBNPA). It’s almost instantaneous antimicrobial activity combined with its rapid chemical breakdown make it the chemical of choice for smaller...

  • Chlorine Scavengers

    AntiChlor formulations remove free and combined chlorine from RO system feedwaters to protect membranes from oxidation damage. Membranes can last for days or years depending on the care they receive. Chlorine in feedwater can permanently damage membranes, requiring them to be replaced. AntiChlor liquid is an extremely economical option for chlorine removal compared to other methods. It’s offered in two formulations, and both are certified for use in systems producing potable water. To

  • AntiChlor - Model 427 - Odorless Liquid Sodium Bisulfite Formulation

    AntiChlor - Model 427 - Odorless Liquid Sodium Bisulfite Formulation

    AntiChlor 427 is a modified, odorless liquid sodium bisulfite formulation used to remove free and combined chlorine from reverse osmosis (RO) feedwaters. This food-grade chemical is stabilized to prevent off-gassing, making it ideal for indoor installations. AntiChlor 427 liquid is also less prone to air oxidation than equivalent solutions and has a longer shelf life when compared to straight sodium bisulfate solutions. AntiChlor 427 removes chlorine...

  • Cleaners for MF/UF Membranes

    Avista MF/UF specialty formulations may be applied in place of generic cleaners or as a periodic recovery cleaner between cleanings with generics. The AvistaClean MF line is formulated to remove common foulants and offer superior results compared to generics. To assist you in identifying site-specific foulants, we offer the MF/UF Cleaning Study and the MF/UF Membrane Autopsy, which includes Chromatic Elemental Imaging, a new technology first introduced by Avista that can identify the locatio

  • AvistaClean - Model MF1000 - High pH Powder Cleaner Used to Remove Foulants

    AvistaClean - Model MF1000 - High pH Powder Cleaner Used to Remove Foulants

    AvistaClean MF 1000 powder is a proprietary, one-step cleaner used to remove foulants from microfiltration (MF) and ultrafiltration (UF) membrane surfaces and pores. This cleaner acts on organic and particulate foulants and is compatible with the MF/UF modules offered by major membrane manufacturers. AvistaClean MF 1000 is NSF certified for off-line use in drinking water systems and can be used in conjunction with AvistaClean MF 3000 when membrane...

  • AvistaClean - Model MF 1000A - High pH Powder Synergistic Cleaner

    AvistaClean - Model MF 1000A - High pH Powder Synergistic Cleaner

    AvistaClean MF 1000A powder is a synergistic cleaner blend formulated to remove organic and particulate foulants from chlorine tolerant microfiltration (MF) and ultrafiltration (UF) membrane surfaces and pores. This cleaner is a one-step cleaning process that can be used sequentially with AvistaClean MF 3000 when the foulant contains calcium carbonate and/or metals. AvistaClean MF 1000A has proven compatible with MF/UF modules offered by all major...

  • AvistaClean - Model MF 3000 - Low pH Powderd Cleaner

    AvistaClean - Model MF 3000 - Low pH Powderd Cleaner

    AvistaClean MF3000 is a proprietary cleaner used to remove calcium carbonate and metal foulants that coat and plug microfiltration (MF) and ultrafiltration (UF) membrane surfaces and pores. AvistaClean MF3000 is a one-step cleaning process. However, it can be used in conjunction with AvistaClean MF1000 or MF1000A when the membrane foulants are colloidal and/or organic. This product has proven compatible with the MF/UF modules offered by the major...

  • Coagulants

    RoQuest membrane compatible coagulants improve the efficiency of MMF equipment by increasing particulate removal and providing a higher quality feedwater to downstream membrane systems. Adding a RoQuest liquid coagulant to feedwater causes particles to be more readily retained by MMF equipment, improving the filtrate quality fed to downstream membrane systems. Better quality filtrate can reduce cleaning frequencies and increase system run times. Studies prove that MMF equipment without coagu

  • RoQuest - Model 3000 - Liquid Coagulant Contains

    RoQuest - Model 3000 - Liquid Coagulant Contains

    RoQuest 3000 liquid coagulant contains a proprietary blend of organic polymers that works best on waters with hard silt based colloidal particulates. This multicomponent polymer coagulant is formulated specifically for membrane use, including applications of particle-laden borehole sources or treated municipal supplies that are used for industrial or drinking water. RoQuest 3000 is injected into the feedstream of multimedia and sand filters, where it...

  • RoQuest - Model 4000 - Liquid Coagulant

    RoQuest - Model 4000 - Liquid Coagulant

    RoQuest 4000 liquid coagulant is an organic polymer and ferric sulfate blend used to enhance the removal of a broad spectrum of inorganic particulate, organics, silt, and colloids in multimedia filters. This multicomponent polymer and iron salt coagulant is formulated specifically for membrane use, including applications of surface waters that are brackish or seawater in origin. RoQuest 4000 is injected into the feedstream of multimedia and sand...

  • RoQuest - Model 6000 - Liquid Blend of Organic Coagulants and Ferric Sulfate

    RoQuest - Model 6000 - Liquid Blend of Organic Coagulants and Ferric Sulfate

    RoQuest 6000 is a liquid blend of organic coagulants and ferric sulfate used to reduce turbidity and remove humic and fulvic acids in multimedia filters. This multicomponent polymer and iron salt coagulant is formulated specifically for membrane use, including applications of surface waters that are both brackish and seawater in origin. RoQuest 6000 is also used as a coagulant and flocculation aid in flocculator-clarifiers and multi-media filters.

  • RoQuest - Model FS - Liquid Coagulant Contains Ferric Sulfate

    RoQuest - Model FS - Liquid Coagulant Contains Ferric Sulfate

    RoQuest FS liquid coagulant contains ferric sulfate and is designed for use as a flocculant in direct filtration applications. This coagulant enhances filter performance by removing colloids, silt and many organic molecules to produce an improved filtrate that will reduce downstream reverse osmosis (RO) and nanofiltration (NF) membrane fouling. The inorganic salts in this product remove suspended material by adsorption entrapment, providing good...

Products by Ecosoft Water Systems GmbH

  • Filtration Systems

  • Ecosoft - Ecomix Softening Systems

    Ecosoft - Ecomix Softening Systems

    Contaminant removing is carried during the contact of water with a specially designed and patented material that contains five ingredients of various origins. Inert layer removes adsorbed iron oxides; FerroSorb removes iron and manganese compounds; HumiSorb removes organic and metalorganic impurities; Cation exchange resin softens water; Quartz sand ensures uniform flow across the vessel.

  • Ecosoft - Model FU - Softening Systems

    Ecosoft - Model FU - Softening Systems

    The principle of system work is based on conventional ion exchange softening process. Calcium and Magnesium ions are removed from the water instead of sodium ions during the contact with cation exchange resin. When the resource of filter media is exhausted brine regeneration is used for material properties restoring.

  • Model FK - Twin Ecomix Softening Systems

    Model FK - Twin Ecomix Softening Systems

    Contaminant removing is carried during the contact of water with a specially designed and patented material that contains five ingredients of various origins. Inert layer removes adsorbed iron oxides; FerroSorb removes iron and manganese compounds; HumiSorb removes organic and metalorganic impurities; Cation exchange resin softens water; Quartz sand ensures uniform flow across the vessel.

  • Model FU  - Twin Softening systems

    Model FU - Twin Softening systems

    The principle of system work is based on conventional ion exchange softening process. Calcium and Magnesium ions are removed from the water instead of sodium ions during the contact with cation exchange resin. When the resource of filter media is exhausted brine regeneration is used for material properties restoring.

  • RO Systems

  • RObust - Reverse Osmosis Systems

    RObust - Reverse Osmosis Systems

    Impurities present in water are removed during the contact with semipermeable membrane. Membrane passes water molecules and retains all the remained impurities. As a result two water streams are generated: purified water (permeate) and the concentrate that is discharged into the sewers. The feature of RObust system is that it include three Filmtec membranes with productivity of 100 GPD. Two of three membranes are connected in parallel and one is...

  • Model MO 6000 & 10000 - Commercial RO systems

    Model MO 6000 & 10000 - Commercial RO systems

    Impurities present in water are removed during the contact with semipermeable membrane. Membrane passes water molecules and retains all the remained impurities. As a result two water streams are generated: purified water (permeate) and the concentrate that is discharged into the sewers.

  • Ecosoft - Model MO-32 S-MAXI - Industrial RO systems

    Ecosoft - Model MO-32 S-MAXI - Industrial RO systems

    Applications: deionization (demineralization) of water for industry needs. Technology: reverse osmosis — process whereby raw water is separated into two streams: permeate (purified water) and concentrate (waste carrying away rejected solutes and other impurities).Concentrate is disposed of and permeate is collected in the storage tank.

  • Container RO Systems

    Container RO Systems

    Ecosoft MO-solutions — water treatment and demineralization modular plant. Technology: multimedia filtration with Clack Filter Ag, water demineralization with Dow Filmtec RO-elements and UV-sterilization. Purpose: provide water for potable and industrial applications in the areas with high water salinity

  • Reverse Osmosis Vending Machines

    Reverse Osmosis Vending Machines

    Reverse osmosis vending machine can be connected to any common water supply system and is capable of producing extra quality drinking water with help of filtering and membrane equipment produced by Ecosoft. Purified drinking water is dispensed in measured quantities in customer’s container from 0,5 to 18,9 liters. Protective case and control board are made of durable steel and thus provide resistance to environment that allows to install the...