Industrial Test Systems, Inc.

29 products found

Industrial Test Systems, Inc. Products

  • Other Products

  • Bromine for Water Quality Testing (480001)

    Bromine for Water Quality Testing (480001)

    These Bromine test strips are perfect for determining whether or not you have the correct amount of sanitizer present. SenSafe™Bromine test strips are sold in bottles of 50 test strips and all of the reagents are impregnated on the test strip pad. There are no chemicals to mix, results are obtained in 30 seconds, and the test strips are safe to use with no hazardous chemicals (no MSDS required).

  • Chloride Check for Water Quality Testing (481027)

    Chloride Check for Water Quality Testing (481027)

    WaterWorks Chloride Check is the most advanced chloride test strip available today. Designed to verify EPA guidelinesfor chloride, these Chloride Check test strips are easy and safe-to-use without sacrificing performance and reliability. Measuring levels from 0-500 ppm (mg/L), Chloride Check promises to replace conventional measuring techniques.

  • Chromium (Chromate) for Water Quality Testing (480047)

    Chromium (Chromate) for Water Quality Testing (480047)

    Detecting levels of Chromium has never been so easy! Designed to be a rapid, accurate alternative to wet chemical tests, WaterWorks™ Chromium for water quality testing offers the user an easy dip-and-read water quality test strip alternative for determining chromium concentrations in water. Detecting levels of 0.1, 0.25, 0.5, 1, 2.5, 5, 10, 25, 50 mg/L (ppm), WaterWorks™ Chromium is ideal for on-site water quality testing when...

  • WaterWorks - Model 81028 - Chlorine Dioxide Test Strips

    WaterWorks - Model 81028 - Chlorine Dioxide Test Strips

    A broad range of concentrations can be measured with the WaterWorks™ Chlorine Dioxide Testing Strip. Accurate results are obtained in under one minute, making the new chlorine dioxide test strip ideal for the paper processing industry. Strips are packaged in either bottles or foil packs labeled with a detailed color chart. This patented test promises to be a very attractive alternative to wet chemical chlorine dioxide tests for...

  • eXact Strip Cyanide for Water Quality Testing (484003)

    eXact Strip Cyanide for Water Quality Testing (484003)

    Designed for monitoring effluents and surface waters, the eXact® Strip Cyanide Kit requires as little as two minutes for cyanide colorimetric analysis. The test procedure is as follows: add 2 ml sample to microcuvette, dip #1 eXact® Strip (adjusts the pH of the sample and converts cyanide to cyanogen chloride) for 30 seconds into sample, then dip #2 eXact® Strip (cyanogen chloride reacts with Isonicotinic and Dimethylbarbituric...

  • Manganese for Water Quality Testing (481020)

    Manganese for Water Quality Testing (481020)

    Detecting levels of Manganese has never been so easy! The new and improved SenSafe™ Manganese Check eliminates interferences from several ions like copper, iron, cobalt, lead, nickel, etc. Designed to be a rapid, accurate alternative to wet chemical tests, SenSafe™ Manganese Check offers the user an easy dip-and-read test strip alternative for determining manganese concentrations in water. Detecting levels of <0.02, 0.05, 0.1, 0.2, 0.5,...

  • Metals Check for Water Quality Testing (480309)

    Metals Check for Water Quality Testing (480309)

    A broad range of concentrations can be measured with the SenSafe™ Metals Check for water quality testing. Accurate results are obtained quickly, making the new Metals Check test strip ideal for water treatment use. Strips are packaged in either bottles or foil packets labeled with an easy-to-use, detailed color chart. This patented test promises to be a very attractive alternative to wet chemical Iodine tests for several...

  • Nitrate / Nitrite Nitrogen for Water Quality Testing (480009)

    Nitrate / Nitrite Nitrogen for Water Quality Testing (480009)

    WaterWorks™ Sensafe Nitrate / Nitrite test strips for water quality testing are the ideal solution when portable, reliable results matter. Whether testing well water or using them as a routine home testing solution, these strips are the best choice. Designed to be safe, no technical training is required to achieve results. Two versions are available depending on your detection needs: The first solution reports results and Nitrogen...

  • Ozone Check for Water Quality Testing (481234)

    Ozone Check for Water Quality Testing (481234)

    SenSafe Ozone Check for water quality testing is a unique test strip that is designed to test for levels of Ozone in water. Reporting levels at 0.05, 0.1, 0.2, 0.3 ppm (mg/L), SenSafe Ozone Check gives you accurate results in only 30 seconds. The low detection ability with this strip is possible because of the unique aperture feature. The test procedure is as follows: Dip one test strip into a 50mL or larger water sample with constant,...

  • Permanganate for Water Quality Testing (481138)

    Permanganate for Water Quality Testing (481138)

    Detecting levels of permanganate has never been so easy! Designed to be a rapid, accurate alternative to wet chemical tests, SenSafe™ Permanganate for water quality testing offer the user an easy dip-and-read test strip alternative for determining permanganate concentrations in water. Detecting levels of 0, 0.05, 0.07, 0.1, 0.15, 0.2, 0.5, 1, 2, 3 ppm (mg/L), SenSafe™ Permanganate is ideal for on-site water quality testing when accurate...

  • Pesticide Check for Water Quality Testing (487996)

    Pesticide Check for Water Quality Testing (487996)

    Pesticide Check for water quality testing is a uniquely designed test using an immunoassay (lateral flow) test strip. Designed to detect both the US EPA limit of 3 ppb (μg/L) for atrazine and 4 ppb (μg/L) for simazine, Pesticide Check is a cost-effective alternative to expensive laboratory testing. Yielding results in only 10 minutes, Pesticide Check for water quality testing saves you both time and money.

  • Protein Check for Water Quality Testing (480128)

    Protein Check for Water Quality Testing (480128)

    Our SenSafe™ Protein Check water quality test strip allows amino acids and proteins, such as Albumin, to be quickly and easily detected in solution. This strip was originally developed in the medical industry as a protein urine test. The indicator, Tetrabromophenol Blue, is very sensitive to protein concentrations. A citrate buffer is used to buffer the indicator and a pH shift is directly proportional to the concentration of the protein...

  • Extended Range pH Check for Water Quality Testing (480104)

    Extended Range pH Check for Water Quality Testing (480104)

    No matter what your application, WaterWorks™ pH Check for water quality testing is the convenient measurement tool for accurate, rapid pH detection in tap water, process water and control, ponds, lakes, and streams. Utilizing a dual-pad indicator system is what makes this pH test unique. Both indicators are designed to work in unison, providing a wide range of color development. Additionally, the dual-indicator system makes color matching easier...

  • Salt Water Check for Water Quality Testing (482028)

    Salt Water Check for Water Quality Testing (482028)

    Designed to be a rapid, accurate alternative to conductivity meters and wet chemical tests, WaterWorks™ Salt Water Check for water quality testing offers the user an easy dip-and-read test alternative for determining concentrations of salt in water. Detecting concentrations of 25%, 50%, 75%, 100%, 125%, and 150%, and conductivity measurements of 0.2, 1.3, 2.7, 4.0, 5.3, 6.6, and 8 (x10 4 :S/cm), WaterWorks™ Salt Water Check is ideal for...

  • Total Hardness for Water Quality Testing (480008)

    Total Hardness for Water Quality Testing (480008)

    Total Hardness test strips for water quality are the ideal solution for many projects. Offered in a variety of packaging options, Total Hardness test strips are perfect for service work, classroom demonstrations, or to give to customers instead of an expensive service call. Total Hardness test strips for water quality offer a wide range of detection and calibrated to be both accurate and sensitive. With their low cost and high accuracy,...

  • Tannin & Lignin eXact Strip for Water Quality Testing (480004)

    Tannin & Lignin eXact Strip for Water Quality Testing (480004)

    This new water quality test allows tannin analysis in water in less than one minute. The test utilizes a eXact® Strip and a vial. To test, simply fill the vial with 100ml of sample water, dip one eXact® Strip into the vial with a constant up and down motion for 20 seconds, remove the strip, and match the dyed sample in the vial to the calibrated color chart to determine Tannin concentration.

  • Zinc for Water Quality Testing (480026)

    Zinc for Water Quality Testing (480026)

    If detection of Zinc is what you need, this is the answer. WaterWorks™ Zinc Check II for water quality testing is designed to specifically react with Zinc. Say goodbye to dangerous, time-consuming wet-chemical kits that require extensive training and cost. This patented test is a simple dip-and-read water quality test procedure that requires no technical training. Additionally, since there is no glass required to run the test, it is ideal for...

  • eXact EZ Meter and Strips for Water Quality Testing (481668)

    eXact EZ Meter and Strips for Water Quality Testing (481668)

    The eXact(r) EZ advanced photometer is an affordable water-resistant meter is designed to give you fast water chemistry results for drinking water. It is, ideal for residential, commercial, and municipal water testing. Set the meter to the desired test, fill the sample chamber while immersing the meter in your water sample, dip an eXact(r) Strip EZ into the sample for 20 seconds, and then read your results. The eXact(r) EZ analyzes over 19 parameters...

  • eXact Xtra Micro Meter & Strips for Water Quality Testing (486662-M)

    eXact Xtra Micro Meter & Strips for Water Quality Testing (486662-M)

    Industrial Test Systems, Inc. (ITS) announces the release of the revolutionary new eXact® XtraTM Micro meter. This unique meter utilizes the Micro Vial, which uses only a 3.3ml water sample. This exclusive feature from ITS offers several benefits: when you use a smaller water sample you use less reagent; there is less environmental impact with each test; cost per test is reduced; the Micro Vial has a quick-fill feature that only requires 2 seconds...

  • eXact Meters & Strips for Water Quality Testing (481641)

    eXact Meters & Strips for Water Quality Testing (481641)

    The portable meter is designed to give you quality results. This advanced testing meter combines safety, accuracy, and ease-of-use in a small, hand-held package. Kit includes eXact® meter, carry case, instructions, eXact® Strips (US Patent Pending), and 9 volt battery. 30 day money back guarantee! (Meter is not EPA compliant; for screening only)

  • eXact 9 Meter Kit for Water Quality Testing (SP370)

    eXact 9 Meter Kit for Water Quality Testing (SP370)

    eXact® 9 for water quality testing is a fast and easy-to-use meter which allows accurate measurement of 9 routine pool parameters including: free chlorine, total chlorine, pH, alkalinity, bromine, ozone, copper, cyanuric acid, and calcium hardness. This simple to use meter, combined with eXact® Strips, is the perfect way to obtain rapid results by all users, with or without previous experience in water analysis. eXact® 9 helps...

  • eXact Strip Reader

    eXact Strip Reader

    The Colourwave CO7500B Colorimeter, manufactured in England, is the cost-effective solution when instrument precision is required. Designed to be used with our Cyanide eXact® StripTM kit, the Colourwave Colorimeter has a versatile holder that accepts 10mm cuvettes, 10mm microcuvettes, and clear tubes from 7.5 to 15mm in diameter. The sealed membrane touch-pad controls feature on/off, R (zeroing), and T (transmission measurement as absorption or %...

  • Conductivity Meter

    Conductivity Meter

    Every industrial, commercial or natural water source contains dissolved solids or salts. These impurities contribute to the scaling and corrosion of equipment, affect industrial and commercial processes and contribute to poor taste and other deficiencies in drinking water. Obtain reliable digital measurements of your water source with this affordable conductivity meter from ITS. Ideal for water treatment testing, as well as other industrial and...

  • Handheld TDS Meter

    Handheld TDS Meter

    This Korean-made pocket meter is ideal for all water purification applications, wastewater regulation, aquaculture, and hydroponics. Hold function saves measurements for convenient reading and recording. Auto-off function shuts the meter off automatically after 10 minutes of non-use to conserve batteries. Measurement range is 0-9990 ppm (mg/L). From 0-999ppm (mg/L), resolution is in increments of 1 ppm (mg/L); from 1,000 to 9,990 ppm (mg/L), the...

  • Turbidity Meter

    Turbidity Meter

    Water treatment professionals used turbidity measurement to monitor the amount of particles in water. These measurements are used to determine the effectiveness of filtration steps during treatment processes. Turbidity meters typically use the principle of Nephelometry to measure the optical clarity (turbidity) of a sample. The measurement is expressed in Nephelometric Turbidity Units, or NTUs. Color in the sample (from humic substances, for example)...

  • Timers

    Timers

    810005: features the largest display available on a timer: 3 x 21/2' (76 x 63mm). Can be easily read from across a room. Simultaneously displays either one count up channel and a clock, or two count down channels. All channels have a range of 24 hours with 1 second resolution. Also indicates how much time has elapsed after a countdown alarm sounds and conveniently recalls the last timer setting for reuse. 810046: Although small and easily...

  • Handheld Radiation Monitors, part numbers DX-1 & DX-2 for Water Quality Testing

    Handheld Radiation Monitors, part numbers DX-1 & DX-2 for Water Quality Testing

    The DX-1 & DX-2 instantly indicate levels of Beta, Gamma, and X-Ray radiation by audible clicks from an internal speaker and by the compressed-scale meter. The DX-1 has an added feature: at higher radiation levels the speaker beeps, indicating elevated radiation levels. The beeping will begin above 10 mR/hr, intervals between beeps decreasing in relation to field strength, becoming a continuous alerting tone above 20 mR/hr. The DX-2 is useful for...

  • eXact Micro 7+  - Advanced Photometer

    eXact Micro 7+ - Advanced Photometer

    Industrial Test Systems, Inc. (ITS), manufacturer of accurate colorimetric water test kits, introduces its latest handheld photometer: the eXact® Micro 7+. Using patented methods, its ideal for residential, commercial, and municipal water testing, the Micro 7+ reads 7 parameters directly and 41 total. Available in three kits The meter fits comfortably in your hand, is waterproof (IP-67) and the sampling cell is built into the meter. The...

  • eXact - Model Micro 20 - Handheld Dip Strip Photometer - The Ultimate Water Quality Tester - .

    eXact - Model Micro 20 - Handheld Dip Strip Photometer - The Ultimate Water Quality Tester - .

    The eXact® Micro 20 dual wavelength photometer is the ultimate water quality tester delivering design and engineering with the latest patented technologies to deliver sustainable water testing solutions that cost less. The eXact® Micro 20 is waterproof (IP-67) and quickly does on-site testing for over 35 direct read water quality parameters without lookup tables, counting drops or matching colors. It features a narrow band wavelength filter for optimal...