38 training found
Interactive Occupational Training & Certification Training
-
Safety
-
Back Safety
(BK2T045-F7T) This course provides general back safety awareness relating to job hazards, safe work practices, and ergonomics issues for all employees. Coverage includes: information on the extent of back injury problems in the workplace, recognition and control of occupational ergonomic hazards, good practices for reducing back injuries, conducting ergonomics assessments, and engineering ...
-
Basic Construction Safety
(CS5T101-F7T) This course provides an overview of the hazards inherent in construction work, and identifies principles and practices to mitigate them. Coverage includes general considerations for contractors and employees related to requirements for tools and equipment, hazards within confined spaces, working safely around cranes, electricity, Lockout/Tagout procedures, trenching and excavation work, fall protection, hand and power tools, hazcom, PPE, ...
-
Behavior-based Safety Training
(BH3T018-F7T) This course provides supervisors with an overview of the concepts of behavior-based safety including how to apply behavior-based safety techniques in their day-to-day duties and ...
-
Defensive Driving
(DD2T019-F7T) This course provides easy to follow defensive driving techniques which will help reduce your chances of being in a motor vehicle accident. This training will define defensive driving, show how to recognize accident prevention methods, describe the impact of drinking and driving, and identify vehicle safety measures on the ...
-
Ergonomics for Supervisor
(ES4T030-F5T) This course provides supervisors with an understanding of the main elements of an Ergonomics Program based on OSHA industry guidelines and the NIOSH manual “Elements of Ergonomics Program.” The coverage includes preventative measures as well has how to respond when a possible injury is reported. It includes information on risk factors, signs, and symptoms of MSDs, common injuries, controls and safe work ...
-
Ergonomics General
(EG2T010-F6T) This course provides general training on the key components of an Ergonomics Program based on a composite of OSHA industry guidelines and the NIOSH manual “Elements of Ergonomics Program,” including information regarding the risk factors, signs, and symptoms of “work-related musculoskeletal disorders” (MSD), and best practices to reduce risk of ...
-
Fire Prevention
(FP3T005-F6T) This course covers basic fire safety principles, including the recognition and prevention of potential fire hazards and proper emergency procedures such as fire extinguisher operation and maintenance along with information required by OSHA’s Workplace Fire Protection Program, including employer's responsibilities, exit plans, fire fighting equipment, and training to prevent fire, death, and ...
-
Forming Effective Safety Committees
(SC4T077-F6T) This course introduces managers to best practices for establishing and maintaining a joint employee-management safety committee as one of the most effective means of increasing employee involvement in the safety ...
-
Hand and Finger Safety
(FS3T004-F6T) This course provides an overview of hazards and safety measures designed to prevent hand and finger injury including: common injuries, hazards posed by tools, safe practices for working around equipment, effective engineering and administrative controls, the importance of machine guards and ...
-
Hand and Power Tool Safety
(PWT3002-F6T) Employees use a variety of hand-held tools in the workplace. This course will provide an understanding of the potential hazards associated with the use of hand tools and power tools as well as the safety precautions required to prevent injuries from occurring. Power tool hazards are addressed by the power source used: pneumatic, liquid fueled, hydraulic, and ...
-
Hearing Conservation
(HRT2048-F6T) This training course provides information to help employees prevent noise-induced hearing loss. It also explains the purpose and components of a Hearing Conservation ...
-
Hoisting and Rigging
(HO4T052-F7T) This course provides an overview of safety issues applicable to the operation of cranes and derricks such as: crawler, locomotive, and truck cranes; hammerhead tower cranes; overhead and gantry cranes, floating and barge-mounted cranes, helicopter crane operations, and more. Includes general safety requirements, manufacturer’s roles, required skills for supervisors, equipment inspections, basic operator and rigger skills and safety concepts ...
-
Indoor Crane & Sling
(IC3T071-F6T) This course covers basic crane and sling safety training requirements applicable to moving large, heavy loads within manufacturing and construction environments. Coverage includes understanding the manufacturer’s role in crane and sling safety, operator and crew responsibilities, required skills for supervisors, equipment inspections, basic operator and rigger skills and safety concepts as well as techniques for handling, attaching, and ...
-
Laboratory Radiation Safety
(LR2T067-F5T) This course provides initial training on working with radioactive materials including: federally mandated training requirements, review of typical radioactive materials encountered in the lab, hazardous effects, dose measurement and safety practices for controlling exposure, decontamination procedures, regulatory process, and organizational procedures for the use of radioactive ...
-
Laboratory Safety Overview
(LB3T025-F5T) This course identifies general requirements of the Laboratory Safety Standard and Chemical Hygiene Plans. It provides safety guidelines to protect against common laboratory hazards such as chemical exposure, fires, burns, and general emergency guidelines to be followed in the ...
-
Laboratory Safety – Chemical Hygiene
(LS3CH01-P7T) This online PowerPoint course provides an overview of the safety and health concerns common in laboratories. The coverage includes background on the Laboratory Safety Standard 29 CFR 1910.1450, the role of a Chemical Hygiene Plan, General Standard Operating Procedures, Occupational Exposure Limits (OELs), Threshold Limit Values (TLVs), Material Safety Data Sheets, proper labeling, storage, and disposal of hazardous chemicals, hazardous waste ...
-
Laboratory Safety – Corrosives
(LS3CR02-P7T) This online PowerPoint course covers the hazards presented by corrosive chemicals found in the laboratory and the precautions that should be followed in the safe handling and storage of these agents, along with information on PPE usage and first aid procedures for exposure to corrosives. Corrosive burns are among the most common lab ...
-
Laboratory Safety – Ergonomics
(LS3ER03-P7T) This online PowerPoint course covers hazards and preventative measures to reduce risk of injury to joints, muscles, nerves, bones and tendons resulting from laboratory procedures requiring long, intensive tasks involving awkward and repetitive movements. Examples include: repetitive pipetting, keyboard and mouse use, microscopy, and micromanipulation. The course helps students: identify risk factors for cumulative trauma disorders, recognize ...
-
Laboratory Safety – Flammables
(LS3FL04-P7T) This online PowerPoint course covers fire hazards in the laboratory and proper safety precautions including handling and storage of flammable chemicals, chemical properties related to flammability (such as flash point, vapor pressure, vapor density, etc.), chemical compatibility, environmental considerations, Uniform Fire Code requirements, spill control techniques, fire extinguisher types, and the proper use of fire ...
-
Laboratory Safety – Fume Hoods
(LS3FH05-P7T) This online PowerPoint course covers the proper use of fume hoods to reduce the risk of injury from inhalation of hazardous chemicals. Studies have shown that at least half the illnesses related to fume hoods are due to improper use of the hood rather than hood design. This course reviews different types of fume hoods and the design considerations related to safety including proper use of airfoils, baffles, and sashes. It also provides usage ...
-
Laboratory Safety – Personal Protective Equipment
(LS3PE10-P7T) This online PowerPoint course covers the proper selection and use of PPE in the laboratory. Even experienced employees can fail to adequately protect themselves by mistakenly using insufficient or inappropriate PPE. This course will enable the student to better understand the need for effective PPE, match the correct PPE to specific laboratory hazards, understand the limitations of PPE, and understand proper fit and ...
-
Laboratory Safety – Physical Hazards
(LS3PH07-P7T) This online PowerPoint course covers laboratory hazards not directly related to chemicals, such as: electrical hazards, cuts and lacerations, slips, trips and falls, and miscellaneous hazards. Coverage includes recommendations for preventative measures and first aid tips for most minor ...
-
Laboratory Safety – Pollution Prevention, a Template
(LS3PT09-P7T) As a time saving resource for your Pollution Prevention Program, this course module provides background information and plenty of detail about each of the five steps in developing a pollution prevention program. It includes both a "fill in the blank" written plan template and a customizable PowerPoint ...
-
Laboratory Safety – Pressure Hazards
(LS3PR11-P7T) This online PowerPoint course covers the hazards of pressurized or reduced pressure operations in the laboratory. The course identifies common pressure hazards and recommends safety precautions and equipment to help reduce risks of explosions, implosions, chemical hazards, and other pressure-related threats. It also reviews handling, use and storage of compressed gases and the safe operation of vacuum ...
-
Laboratory Safety – Radiation Safety
(LS3RS06-P7T) This online PowerPoint course covers basic radiation physics, biological effects of ionizing radiation, laboratory radiation protection procedures, and radiation safety rules and regulations. Completion of this series and a final exam will satisfy the basic training requirements for radiation workers as set forth in your Radioactive Materials License. Additional subjects include: radiation sources, atomic structure and radioactivity, health ...
-
Laboratory Safety – Reactives
(LS3RE12-P7T) This online PowerPoint course covers the hazards of working with highly reactive chemicals that can produce violent reactions including the formation of highly toxic products (especially gases), development of high pressures or temperatures, spontaneous development of heat, or explosions. The categories of reactions covered include: self-polymerizations, reactions with water, pyrophorics, peroxide formation, incompatibles and oxidizers, ...
-
Laboratory Safety – Safety Equipment
(LS3SE13-P7T) This online PowerPoint course covers the proper use common safety equipment found in the laboratory. The course includes information on selection, placement, maintenance, and use of fire extinguishers, eye wash stations, and emergency showers. Different types of fire extinguishers are reviewed along with factors to consider in making a decision on whether to fight a fire or evacuate and wait for help. A list of inspection items and general ...
-
Laboratory Safety – Spill Control
(LS3SC14-P7T) This online PowerPoint course covers the hazards presented by spills of hazardous materials in the laboratory. The key to safety in the event of a spill is preparation, training, and prevention techniques. This course stresses all of these factors in preventing spills and in dealing with the emergency when a spill happens. Coverage includes preparation steps, being familiar with chemical hazards, use of appropriate equipment, emergency ...
-
Laboratory Safety – Toxics
(LS3TX15-P7T) This online PowerPoint course covers toxicity hazards and safety precautions in the laboratory. The course helps learners understand toxicity terms and theory including the dose-response model, the effects of relative toxicity, concentration, and time of exposure, routes of entry into the body, LD50, LC50, TLV, TLV-TWA, TLV-STEL, STEL, PEL, IDLH, and more. The course also covers seven specific methods to minimize the risk of exposure to ...
-
Office Safety
(OS2T007-F5T) This course covers common hazards and safety practices for office environments including ergonomics, stress, hazard communication, bloodborne pathogens, electrical safety, and emergency evacuation. The course identifies employer and employee responsibilities under the Hazard Communication Standard and other applicable regulations, defines common terms and elements of various office safety programs, and specifies controls and work practices ...
-
Process Safety Management Program
(PS4T088-F6T) This course is designed to help employees, contractors, and contract employees who work at industrial process plants to recognize the potential health and safety implications associated with their jobs. This course is intended to educate the trainee in order to help prevent or minimize the consequences of a catastrophic release of toxic, reactive, flammable, or explosive Highly Hazardous Chemicals (HHC) from a ...
-
Slips, Trips, and Falls
(SL4T063-F6T) Slips, trips, and falls constitute the majority of general industry accidents. They cause 15% of all accidental deaths and are second only to motor vehicles as a cause of fatalities. This course provides employees with the ability to recognize and prevent slip, trip, and fall hazards and to address the key components of ladder ...
-
Welding, Cutting and Brazing
(WL3T091-F6T) This course covers the unique combination of safety and health hazards related to welding, cutting, and brazing, including arc welding and cutting, elements of a welding safety program, handling and storage of compressed gas cylinders, oxygen safety practices, use of PPE, fire prevention, ventilation, confined spaces, toxic substances, and ...
-
Winter Driving Safety
(WD4T068-F6T) This course provides easy to follow driving techniques to increase your safety while operating a motor vehicle in adverse winter weather conditions. Coverage includes proper vehicle maintenance, recognizing and responding to varying weather conditions and hazards, defensive driving tips for winter driving, personal safety considerations, appropriate actions in a breakdown or accident ...
-
Working in Extreme Temperatures
(ET3T086-F5T) This course provides training in identifying and avoiding hazards related to extreme temperature exposure on the job, including: recognizing symptoms of heat and cold-related illnesses, factors that affect the body’s ability to withstand temperature extremes, steps to reduce the risk of illness or injury, first aid measures for heat and cold-related illnesses, and precautions regarding to use of PPE in extreme temperature ...
-
Working Safely: Job Safety Analysis (General)
(JA4T084-F6T) This course covers the purpose of safe work practices, assessment tools for identifying workplace hazards, job safety analysis (JSA), its methods, and steps, JSA control methods, effectiveness and limitations of each method, workplace inspection components, workplace housekeeping practices, and ...
-
Working Safely: JSA Supervisor (Job Safety Analysis Supervisor)
(JS4T084-F6T) This course provides training for supervisors in identifying and controlling hazards on the job. The course is designed to help supervisors establish a safe work practices program and reduce the risk of injury from work place hazards. Coverage includes: hazard assessment tools, JSA methods and steps, JSA controls, the effectiveness and limitations of each method, workplace inspection components, workplace housekeeping practices, and ...
-
Workplace Safety Orientation
(SO4T074-F6T) This course provides an awareness level orientation of basic industrial safety fundamentals that is ideal for new employee orientation. It was designed to provide an overview of some of the basic concepts and techniques used in modern industry to protect workers. Course content covers; Hazard Communication, Bloodborne Pathogens, Lockout-Tagout, Confined Space Entry, PPE, Emergency Response Planning, and Respiratory ...