Itasca International, Inc

23 software found

Itasca International, Inc Software

  • Geotechnical Software

  • 3DEC - Version 7.0 - Three-Dimensional Numerical Geotechnical Software

    3DEC - Version 7.0 - Three-Dimensional Numerical Geotechnical Software

    3DEC is a three-dimensional numerical modeling code for advanced geotechnical analysis of soil, rock, ground water, structural support, and masonry. 3DEC simulates the response of discontinuous media (such as jointed rock or masonry bricks) that is subject to either static or dynamic loading. The numerical formulation It is based on the 

  • FLAC - Version 8.1 - Numerical Modeling Software

    FLAC - Version 8.1 - Numerical Modeling Software

    FLAC, Fast Lagrangian Analysis of Continua, is numerical modeling software for advanced geotechnical analysis of soil, rock, groundwater, and ground support in two dimensions. FLAC is used for analysis, testing, and design by geotechnical, civil, and mining engineers. It is designed to accommodate any kind of geotechnical engineering project that requires continuum analysis. FLAC utilizes an explicit finite difference formulation that can model...

  • FLAC3D - Version 7.0 - Numerical Modeling Software

    FLAC3D - Version 7.0 - Numerical Modeling Software

    FLAC3D (Fast Lagrangian Analysis of Continua in 3 Dimensions) is numerical modeling software for geotechnical analyses of soil, rock, groundwater, constructs, and ground support. Such analyses include engineering design, factor of safety prediction, research and testing, and back-analysis of failure.

  • FLAC/Slope - Version 8.1 - Graphical Interface Software

    FLAC/Slope - Version 8.1 - Graphical Interface Software

    FLAC/Slope is a special, streamlined version of FLAC for evaluating the factor of safety (FoS) of soil and rock slopes in two dimensions with simple and fast model setup and analysis execution. FLAC/Slope can simulate stability problems under a wide variety of slope conditions, including: arbitrary slope geometries, multiple layers, pore pressure conditions, heterogeneous soil properties,...

  • KATS - Kinematic Analysis Tools for Slopes

    KATS - Kinematic Analysis Tools for Slopes

    KATS (Kinematic Analysis Tools for Slopes) is a tool developed by Itasca that assesses instabilities caused by day-lighting wedges and planar failures formed when different structural sets interact with the orientation of a given slope. KATS main application is for bench-berm scale analysis, which is understood as a first step in the mining slope design process for moderate and competent rock masses. It is also possible to perform a kinematic analysis...

  • UDEC - Version 7.0 - Universal Distinct Element Code Software

    UDEC - Version 7.0 - Universal Distinct Element Code Software

    The Universal Distinct Element Code (UDEC) is a two-dimensional numerical program that simulates the quasi-static or dynamic response to loading of media containing multiple intersecting joint structures. The discontinuous medium is represented as an assemblage of discrete blocks while the discontinuities are treated as boundary conditions between blocks. Large displacements along discontinuities and rotations of blocks can occur. UDEC utilizes an...

  • XSite - Version 3.0 - Three-Dimensional Hydraulic Fracturing Numerical Simulation Program Software

    XSite - Version 3.0 - Three-Dimensional Hydraulic Fracturing Numerical Simulation Program Software

    XSite is a powerful three-dimensional hydraulic fracturing numerical simulation program based on the Synthetic Rock Mass (SRM) and Lattice methods. XSite is capable of modeling multiple wellbores with multiple stages and clusters, including open-hole completions and perforation tunnels. XSite resolves general hydraulic fracture interaction, including propagation in naturally fractured reservoirs with deterministically or stochastically generated...

  • 3DEC - Version 7.0 - Distinct-Element Modeling of Jointed and Blocky Material in 3D

    3DEC - Version 7.0 - Distinct-Element Modeling of Jointed and Blocky Material in 3D

    3DECis a three-dimensional numerical modeling code for advanced geotechnical analysis of soil, rock, ground water, structural support, and masonry. 3DECsimulates the response of discontinuous media (such as jointed rock or masonry bricks) that is subject to either static or dynamic loading. The numerical formulation It is based on the distinct element method (DEM) for discontinuum...

  • FLAC/Slope - Version 8.1 - Explicit Continuum Factor-of-Safety Analysis of Slope Stability in 2D

    FLAC/Slope - Version 8.1 - Explicit Continuum Factor-of-Safety Analysis of Slope Stability in 2D

    FLAC/Slopeis a special, streamlined version ofFLACfor evaluating the factor of safety (FoS) of soil and rock slopes in two dimensions with simple and fast model setup and analysis execution.FLAC/Slopecan simulate stability problems under a wide variety of slope conditions, including: arbitrary slope geometries, multiple layers, pore pressure conditions, heterogeneous soil properties, surface loading, and structural reinforcement.

  • Hydrogeological

  • Minedw - Version 3.0 - Three-Dimensional (3D), Finite-Element, Groundwater Flow Program Software

    Minedw - Version 3.0 - Three-Dimensional (3D), Finite-Element, Groundwater Flow Program Software

    MINEDW is a three-dimensional (3D), finite-element, groundwater flow program that was developed specifically for mining applications. MINEDW is used worldwide to design dewatering or depressurization systems, predict local and regional environmental impacts of mine dewatering, assist in the design of water-supply systems, simulate the infilling of a “pit lake” after mining ceases, and estimate pore-pressure distributions within highwalls...

  • Microseismics

  • CAD/Meshing

  • BlockRanger - Version 1.2 - All-Hexahedral, Mapped Grid Generation Software for Engineers

    BlockRanger - Version 1.2 - All-Hexahedral, Mapped Grid Generation Software for Engineers

    BlockRanger is a fully interactive, volume mesh generation plug-in for the Rhinoceros 5.0 or 6.0 3D CAD system. BlockRanger converts Rhino 5 or 6 solids into blocks of high-quality hexahedral (brick) elements for use with most engineering analysis packages that require hexahedral meshing and a strict control of element quality, spatial distribution, and...

  • Griddle - Version 1.0 - Advanced Grid Generation Software for Engineers

    Griddle - Version 1.0 - Advanced Grid Generation Software for Engineers

    Griddle is a fully interactive, general-purpose mesh generation plug-in for Rhinoceros 5.0 or 6.0 3D CAD software. Griddle can be used to remesh Rhino surface meshes to comply with precise size specifications and type (triangle or quad-dominant). Surface meshes can then be used as boundaries for Griddle’s volume mesher, which produces...

  • Rhinoceros - Solid Modeling Tool for Designers and Engineers

    Rhinoceros - Solid Modeling Tool for Designers and Engineers

    Rhinoceros (Rhino) is a solid modeling tool for designers and engineers. With Rhino you can import, create, edit, and export geometrical objects in a variety of formats for use in Itasca software (FLAC3D, 3DEC, PFC). Rhino is developed by Robert McNeel & Associates. Itasca is an authorized reseller of Rhinoceros.

  • Consulting

  • Blo-Up - Hybrid Stress Blast Model (HSBM)

    Blo-Up - Hybrid Stress Blast Model (HSBM)

    Since 2001, Itasca has been a member of the Hybrid Stress Blast Model (HSBM) project with the goal of developing a numerical model of the rock blasting process. The software created by Itasca, called Blo-Up, uses a unique combination of continuous and discontinuous numerical methods to represent the key processes occurring during blasting. Blo-Up is a three-component coupled model of rock blasting. A coupled modeling approach was chosen because no...

  • IHOD - Groundwater Data Management Software

    IHOD - Groundwater Data Management Software

    IHOD (Itasca Hydrologic Observation Dataviewer) was developed by Itasca specifically for groundwater data management. IHOD is a customizable QGIS plugin that merges high-level database input/output with tools for viewing hydrogeologic and geochemical data. It...

  • ReBop - Rapid Emulator Based On PFC Software

    ReBop - Rapid Emulator Based On PFC Software

    Itasca utilizes REBOP (Rapid Emulator Based On PFC) to simulate material drawdown within a block, panel, or sublevel cave mine by tracking the growth of draw zones (also called Isolated Movement Zones, IMZs) and corresponding fragmented rock flow associated with each drawpoint. The incremental laws governing IMZ growth and material movement in REBOP were derived on the basis of flow...

  • Conventional Numerical Methods of Slope Analysis Software

    Conventional Numerical Methods of Slope Analysis Software

    Conventional numerical methods of slope analysis are mainly based on continuum approximation of the rock mass and the assumption of shear failure. Slope Model utilizes a novel approach that performs simulations of selected 3D sectors of rock slope stability in hard, fractured rock masses, consisting of any number of planar benches. The software implements a version of the Synthetic Rock Mass (SRM) approach (Pierce...