IUT Technologies GmbH

IUT Technologies GmbH Industries

  • Air and Climate

  • Trace gas analyzers for CMME, BCME, EDC, DCM - Air and Climate

    Trace gas analyzers for CMME, BCME, EDC, DCM

    Introduction: Chlorodimethylether (CMME) and Bis Chloromethyl-ether (BCME) as well as Ethylene dichloride (EDC) and Methylene chloride (DCM) are well known as carcinogenic substances, like other chlorinated hydrocarbons. BCME is also very toxic. These particular chemicals are widely used in the world of chemical industry, especially in the production process for ion exchange resins. CMME in that case acts as a precursor for those resins while BCME is generated as an impurity which cannot be avoided.

  • Trace gas analyzers for DMS - Air and Climate

    Trace gas analyzers for DMS

    Introduction: DMS (Dimethylsulfate) is a liquid compound with a high vapor pressure. It is a widely used basic chemical in the production of Agrochemicals, Cosmetics and Pharmaceutics. It is very toxic at ppb- concentrations already, but also carcinogenic and mutagenic. Furthermore by hydrolysis sulfuric acid is formed, so it is very corrosive also. Since there’s no warning effect in terms of irritation and/ or odor, dangerous amounts can be incorporated without realizing. The effects of intoxication,...

  • Monitoring and Testing

  • Trace gas analyzers for ammonia in hydrocarbons applications - Monitoring and Testing

    Trace gas analyzers for ammonia in hydrocarbons applications

    Introduction: Ammonia (NH3) is a well-known, widely spread air pollutant, which is present almost everywhere in low ppm/ppb concentrations. So this chemical can be found in various processes, where gases are the basic media, such as steam crackers producing gaseous hydrocarbons for further production steps like polymerization. Gases like this are for example Ethylene, Propylene and even so called cracker gas, which is mostly a mixture of above mentioned gases as well as Water and Hydrogen. The gases of...

  • Plastics & Resins

  • Trace gas analyzers for PFIB - Plastics & Resins

    Trace gas analyzers for PFIB

    Introduction: PFIB (Perfluorisobutlyene) is a gaseous compound from the group of Fluorinated Hydrocarbons. It is very toxic at ppb- concentrations already, inodorous, colorless, flavorless, heavier than air and very stable. The effects of intoxication can occur hours or even days after exposition. Thus, it is very dangerous. In specific processes in the chemical industry this compound is produced as un- wanted by product, such as the production of PTFE (Teflon), which cannot be avoided. Since there’s no...

  • Health Care

  • Trace gas analyzers for ethylene oxide - Health Care

    Trace gas analyzers for ethylene oxide

    Introduction: Ethylene oxide is a highly flammable and toxic gas which is the main precursor in the production of Ethylene glycol but also widely used in the medical sterilization. The Ethylene oxide sterilization is applied on medical and pharmaceutical products which cannot resist the high temperature ranges in usual steam sterilization processes. Certain products in the food industry are sterilized in the same way. Ethylene oxide gas penetrates the packaging as well as the product and kills all microorganisms...

  • Agriculture

  • Trace gas analyzers for TCP / DCP - Agriculture

    Trace gas analyzers for TCP / DCP

    Introduction: TCP (1,2,3- Trichloropropane) and DCP (2,3- Dichloropene) are liquid compounds from the group of Chlorinated Hydrocarbons,  defined as carcinogenic and mutagenic at low concentrations already. Due to the pretty high vapor pressure of these liquids, a significant health- risk is created by handling.  TCP and DCP are widely used as chemical precursors in production processes for the synthesis of various products, such as chlorinated solvents and Agrochemicals. Furthermore DCP is also used...

  • Chemical & Pharmaceuticals

  • Trace gas analyzers for phosgene - Chemical & Pharmaceuticals

    Trace gas analyzers for phosgene

    Introduction: Phosgene is the common name for Carbonic Dichloride, a gaseous compound. It is very toxic at ppb- concentrations already. Phosgene is a very important precursor in the chemical industry for the production of e.g. polyurethanes, pharmaceutics colors, etc. and therefore widely used. Even though it is handled in hermetic closed systems only, several generators for Phosgene are in operation worldwide to at least avoid all risks caused by transportation also. The effects of intoxication can occur...

  • Aerospace & Air Transport

  • Trace gas analyzers for hydrazine - Aerospace & Air Transport

    Trace gas analyzers for hydrazine

    Introduction: Hydrazine is an inorganic compound consisting of just Hydrogen and Nitrogen. It is a clear and oily liquid with a high vapor pressure. Hydrazine is very reactive and very toxic, even at low ppb- levels already. It is carcinogenic, irritant at mucous membranes and damages lungs, the nervous system, kidneys and the liver. Hydrazine is used for various technical and chemical purposes such as a corrosion inhibitor in tubes and containers, in chemical production processes as reducing agent or Hydrogen...