J&S Valve, Inc

10 products found

J&S Valve, Inc Products

  • Gate Valve - Resilient Seated

  • J&S Valve - Model Series 6900 - AWWA C509 - Resilient Seated Gate Valve

    J&S Valve - Model Series 6900 - AWWA C509 - Resilient Seated Gate Valve

    J&S Valve - Series 6900 - AWWA C509 - Resilient Seated Gate Valve, Ductile Iron, NRS, Mechanical Joint by Mechanical Joint End Connections, with 2' Operating Nut. J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate Valve with a Large Diameter Stainless Steel Stem, Stainless Steel Hardware, and a Superior Interior and Exterior Fusion Bonded Epoxy Coating.

  • J&S Valve - Model Series 6900 - AWWA C509 - Resilient Seated Gate Valve

    J&S Valve - Model Series 6900 - AWWA C509 - Resilient Seated Gate Valve

    J&S Valve - Series 6900 - AWWA C509 - Resilient Seated Gate Valve, Ductile Iron, NRS, Mechanical Joint by Mechanical Joint End Connections, with 2' Operating Nut. J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate Valve with a Large Diameter Stainless Steel Stem, Stainless Steel Hardware, and a Superior Interior and Exterior Fusion Bonded Epoxy Coating.

  • Plug Valve - Metal Seated Plug

  • J&S Valve - Model Series 4800 - Metal Seated Plug Valve

    J&S Valve - Model Series 4800 - Metal Seated Plug Valve

    J&S Valve Metal to Metal Seated Plug Valves can cut through solids. They are an excellent choice for use in raw sewage applications. The Full-Round Ported Metal to Metal Seated Plug Valve is so strong it can cut through boards and tree limbs. The J&S Metal Seated Plug Valve, with it sharp tough metal seat, cuts through large solids. The valve is constructed with ductile iron and fusion bonded epoxy coated with Nitronic 60 Stainless to...

  • Check Valve - Ball Check

  • J&S Valve - Model Series 9200 - Ball Check Valve

    J&S Valve - Model Series 9200 - Ball Check Valve

    J&S Valve, Ball Check Valve - Fully rubber coated aluminum ball, functions under low pressure, blockage free, low frictional loss, for sewage prone to blockage, Fusion Bonded Epoxy Coated inside and outside, ANSI Class 125, Sizes 1-1/2' to 14'

  • Check Valve - Duckbill Check

  • J&S Valve HedFlex - Model Series 9800 - Duckbill Check Valve, Flange

    J&S Valve HedFlex - Model Series 9800 - Duckbill Check Valve, Flange

    Series 9800 is designed to bolt to flanges. Available as in-line and flange by flange.  See drawing link below for all 3 flange type Hedflex Duckbill Check Valves.  J&S HedFlex Check Valves are constructed with superior high grade rubber and superior polyester reinforcement to improve performance, operation, and life expectancy. There are many grades of rubber that vary in chemical make-up. The elastomer’s chemical make-up...

  • Butterfly Valve - Wafer Style

  • J&S Valve - Model Series 2300 - Wafer Butterfly Valve

    J&S Valve - Model Series 2300 - Wafer Butterfly Valve

    General Purpose Commercial Wafer Body Style Butterfly Valves fit either ANSI Class 125 or Class 250 Flanges. Valve Body shall be cast Grey Iron ASTM 126 Grade B. Valve stems are to be constructed of 304 Stainless Steel. The disc material is 316 Stainless Steel. The seat material is EPDM. The stem seals O-rings are made of EPDM. Valves 2” - 8” are lever operated, and valves 10” and larger can be gear operated, unless automatic...

  • Ball Valve - Metal Seated Ball Valve

  • J&S Valve - Model Series 5000 - Segmented Metal Seated Ball Valve

    J&S Valve - Model Series 5000 - Segmented Metal Seated Ball Valve

    J&S Valve - Series 5000 - Metal Seated Ball Valve - Excellent for Pump Control and Shut-Off Applications. 100% Flow Area. Ductile Iron Body, Stainless Steel Hardware, and NSF61 Fusion Bonded Epoxy Coating Interior and Exterior. Contact our knowledgable staff for more information regarding specific applications. 

  • Plunger Valve

  • J&S Valve - Model Series 8000 - Plunger Valve

    J&S Valve - Model Series 8000 - Plunger Valve

    The J&S Valve Plunger Valve is an excellent choice in applications where damage from cavitation becomes an issue. The Plunger Valve is designed with a ring-shaped symetrical cross section that facilitates linier control range. There is a well-defined ring shape cross section in every position. The Plunger Valve directs the flow of liquids passing through the valve, so that implosions caused by very high flow velocity take place in the center...

  • Fire Hydrant - Dry Barrel Hydrants

  • J&S Valve - Model Series DBH-5000 - Dry Barrel Fire Hydrant Protector

    J&S Valve - Model Series DBH-5000 - Dry Barrel Fire Hydrant Protector

    J&S Valve offers the “Protector 5000” Series DBH-5000 dry barrel fire hydrant manufactured to AWWA C502 Standard. The Protector 5000 is UL Listed/FM approved at 250 psi rated working pressure. J&S stocks the Protector 5000 in bury depths ranging from 3’0” – 6’0”, with Mechanical Bases (shoes) manufactured to ANSI/AWWA C111/A21.11 Standard. Flanged Bases in accordance with Ansi B16.1, Class...

  • Tank Mixer

  • J&S - Tank Mixing System

    J&S - Tank Mixing System

    J & S’s Mixing Efficiency -  For turbulent jet mixers entrainment (draw-in and transport of ambient fluid) alone sets up the upper limit of mixing efficiency. The volume enclosed by the outer interfaces of the fluids to be mixed determines mixing efficiency. Mixing efficiency is directly proportional to the number of turbulent jets