Only show results in Virginia? Ok

energy recovery Companies

  • China Energy Recovery, Inc. (CER)

    China Energy Recovery, Inc. (CER) is an international engineering and manufacturing company that specializes in the design, construction and installation of waste heat energy recovery systems that captures and converts industrial waste energy produced by heavy industrial processes such as petroleum and chemicals refining, paper manufacturing and refining into low-cost ...

    based in Shanghai, CHINA.

  • Premium

    Anguil Environmental Systems, Inc.

    Anguil Environmental Systems is a global provider of industrial air pollution control, emission abatement and energy recovery systems. We design, manufacturer, service and install thermal and catalytic oxidation technologies as well as heat recovery systems for a variety of applications and industries. Anguil Aqua was developed to help our industrial clients with water ...

    based in Milwaukee, WISCONSIN (USA).

  • Osalhafner Inc.

    About Osalhafner Facilities; Set up in individual modules, -High Flexibility (This system can be operated with different incineration temperatures for the energy recovery from household waste and similar wastes, but also for the incineration of hazardous and medical wastes.) Very economical/low investment and operating costs, Utilization of established and approved ...

    based in Istanbul, TURKEY.

  • Premium

    Advanced Cyclone Systems, S. A.

    Advanced Cyclone Systems, S.A. (ACS) is a company exclusively dedicated to the development and commercialization of high efficiency cyclone systems, worldwide. The company works in a very close cooperation with its clients in order to design custom made cyclone systems that really solve their unmet needs.

    based in Porto, PORTUGAL.

  • Energy Recovery Partners (ERP)

    Experience - in all applications, fast return on investment, system design, complete turn key package, competitively priced, energy recovery surveys available. Energy Recovery Partners is located in Hubertis, WI and specializes in VOC abatement, energy recovery systems and HVAC design within industrial operations and food safety. ERP has inhouse, turn-key capabilities and ...

    based in Hubertus, WISCONSIN (USA).

  • 4sphere

    4sphere is a Los Angeles based Clean Tech Turbine company that has created a revolutionary spherically turbine design that is silent, has zero vibrations, has no RPM limitation, does not cause mechanical failures, has no fish or bird kill, is significantly less expensive then our competitors, and can be used in numerous industries. We currently offer our customers three ...

    based in CALIFORNIA (USA).

  • Eneko Heat Recovery Ventilation

    Eneko meets the needs of the sector with its effective and cost-efficient technology products complying with Turkish and European standards, while keeping up the quality on ventilation and heat/energy recovery systems. Since our establishment, we have recovered 62 million kWh of energy with the units we have produced. As Eneko, we are proud of having done our best in ...

    based in izmir, TURKEY.

  • Kaojai Green Energy

    Kaojai Green Energy and the technology we use is an “energy recovery” or an “energy transfer” technology… not an energy generator technology. We take existing energy, recovery this energy, then we “transfer” this energy to be used in the same application or to use the recovered energy in other applications.Because our technology recovers and transfers energy… the only ...

    based in Surin, THAILAND.

  • DDI Heat Exchangers Inc.

    DDI was founded in 1980 and has been providing quality service and reliable solutions ever since. DDI is a well established Canadian company experienced in the design and manufacturing of plate type heat exchangers specifically suitable for applications in heat recovery from liquid waste materials containing large size solids such as municipal sludges and many other ...

    based in Dollard-des-Ormeaux, QUEBEC (CANADA).

  • Wessel-Umwelttechnik GmbH

    Wessel Umwelttechnik GmbH has supplied commercial scale technology for exhaust air cleaning and is now one of today`s leading manufacturers of process plants in the field of environmental technology as well as waste management. Apart from reliably complying with the legal specifications, our priority is finding the most economic solution for our customers. Our ...

    based in Hamburg, GERMANY.

  • European Plastics Recyclers

    Plastics Recyclers Europe was created in 1996 to represent plastics recyclers in Europe. It is located at Schuman in the heart of the European District in Brussels. When created the association had 7 members. Currently Plastics Recyclers Europe has more then 110 members from all over the EU and this number will continue to grow. In the first years of creation, PRE ...

    based in Brussel, BELGIUM.

  • ECOFUT

    ECOFUT, an association under the French law 1901, was created in July 1992 at the initiation of the French industrial and commercial rigid plastic packaging manufacturers of the ELIPSO - (French Plastic Packaging Board), with the participation of producers of raw HDPE materials, PP packaging manufacturers, the bucket section of the packaging industry and the operators ...

    based in Paris, FRANCE.

  • Dais Analytic Corporation

    Dais Analytic Corporation provides industry-changing, nanotechnology-based applications for heating & cooling, water treatment, and energy storage. These applications are reshaping traditional notions of energy efficiency, economics, and eco-friendly products by both reducing environmental impact use while lowering costs.

    based in Odessa, FLORIDA (USA).

  • Mepex Consult AS

    Mepex Consult AS is an independent consultancy company with top competence on waste management and with its direct connections to energy and environmental issues. Our advisory services cover all elements in an integrated waste system from idea to final realization. We can ensure modern solutions based on best available technologies (BAT) in all steps in value chain, in ...

    based in Lier, NORWAY.

  • Desiccant Rotors International Pvt. Ltd. (DRI)

    Desiccant Rotors International (DRI) process of globalisation requires a constant change. Some of our high tech components/products supplied to USA, Europe, Japan, etc by our export division, Desiccant Rotors International (DRI) have gained wide acceptance abroad. In India, the same products are manufactured and sold by Arctic India Engineering. To streamline and have one ...

    based in New Delhi, INDIA.

  • SEMCO LLC

    SEMCO is a global leader in air management. We specialize in the design and manufacture of a wide range of air climate and air movement solutions. Our collective experience is unrivalled. Our constant aim is to provide systems that precisely deliver the best indoor air quality and performance, as well as maximize energy efficiency. Improving indoor environments involves ...

    based in Columbia, MISSOURI (USA).

  • Igniss Energy

    This department is leaded by ex-plant managers of counter current rotary kilns for medical and hazardous waste in Europe. Process design and automation, and the continuous improvement of the process with the different waste types create a winning design. Because incinerators are always far out of each other and in other countries, we are specialized also in internet ...

    based in Korytnica, POLAND.

  • CAMI Depurazioni S.r.l.

    CAMI srl Depurazioni, a leading company, founded in the 1970s and situated in the industrial district of Fiorano Modenese, develops its own customized installations for environmental protection and assures both its Italian and overseas customers a system which is in line with environmental legislation currently in force. De-dusting plants, fume filter, waste water ...

    based in Ubersetto di Fiorano, ITALY.

  • Kessel- & Apparatebau GmbH & Co. KG

    The company, which was founded in 1959 in Wetzlar by the current Managing Director Wilfried Kraft, is a respected and reliable partner for solutions, planning and implementation of waste air purification plants, energy recovery and heat transfer systems. In times of increasing pollutions of our environment, and decreasing resources of raw materials, WK have made it their ...

    based in Wetzlar, GERMANY.

  • The CMM Group, LLC

    Founded in 2001 as Custom Machine Manufacturing, The CMM Group is committed to providing personalized, expert advice and competitively priced solutions to a variety of equipment needs including Thermal Oxidizers, Energy Recovery Systems, Ovens and Dryers, Air Pollution Control Systems, Production Machinery and Ancillary Systems and Components. Our professional staff has ...

    based in De Pere, WISCONSIN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you