Heat Exchangers Companies in Czech Republic

  • TEDOM a.s.

    All the sectors of TEDOM share a common philosophy - effective and environmentally-friendly utilization of energy fuel resources. First and foremost, we fulfill this philosophy by manufacturing equipment for combined heat and power production and operating technologies for utilization of renewable energy sources. In these fields we rank amongst the leading manufacturers, ...

    based in Třebíč, CZECH REPUBLIC.

  • Zena s.r.o.

    ZENA s.r.o. was incorporated in 1991 as a research and development company and has been supplying hollow fiber membranes related products since the very beginning. A commercial membrane application requires not just membranes but a module. We manufacture hollow fiber filtration modules. Technologies are developed, designed and commissioned by our customers. However, if a ...

    based in Brno, CZECH REPUBLIC.

  • John Crane Corporate

    John Crane still offers the mechanical packing and gasket products upon which the Crane Packing Company built its success. Each year, the company manufactures some 238,900 miles of braided packing — almost enough to reach to the moon — along with flat gaskets and live-load packing for valves. The company acquired CDI Energy Services, CDI Oilfield Services, Fiberod and ...

    Office in Lutin, CZECH REPUBLIC.

  • Elektrodesign Ventilátory s.r.o.

    ELEKTRODESIGN ventilátory spol. s r.o. is biggest Czech wholesale merchant with fans, air conditioning and recuperation. We also offer axial and small axial fans, centrifugal and small centrifugal fans, circular in-line duct fans, rectangular duct fans, roof mounted fans, smoke extract fans, explosion proof fans, anti-corrosive fans and industrial fans. We are also ...

    based in Stará Boleslav, CZECH REPUBLIC.

  • Colasit AG

    Colasit AG of Switzerland is one of the leading manufacturers of cross flow and counter flow scrubbing systems, for flow rates up to 100,000 m3/h. We are an internationally active company in the fields of apparatus and plant construction. We are global leaders in the area of plastic fans.

    Distributor in Stará Boleslav, CZECH REPUBLIC.

  • Rabmer Holding GmbH

    Since 2002 the company is managed by the founders daughter Ulrike Rabmer-Koller. Since the Rabmer Pipe Rehabilitation division was disincorporated in 2011 , Mrs. Rabmer-Koller is also the sole shareholder of the entire business group. Ms. Ulrike Rabmer-Koller started to expand the Consulting Division of the Rabmer Group in 2006 in order to offer support and counselling ...

    Office in Sobeslav, CZECH REPUBLIC.

  • Premium

    Purolite Corporation

    Purolite is more than a resin company. It`s a solutions company. Purolite has evolved over the past 31 years from a small domestic importer of ion exchange resins to the premier manufacturer and innovation leader in the world. As time and technology have changed, so has Purolite. In recognition of this evolution, our brand identity now reflects the company we have ...

    Office in Usti nad Labem, CZECH REPUBLIC.

  • Ambrox s.r.o.

    PS Flowtech Group started their activities already in year 2000 focussed onto the production, realization and distribution of complete technological solutions, components such as pumps, heat exchanger, homogenizers etc. The Group provide also complete packagi of service solutions, diagnostics and optimalization of the production costs and technical solutions at site. With ...

    based in Vyškov, CZECH REPUBLIC.

  • PBS POWER EQUIPMENT, s.r.o.

    We are Czech (EU) manufacturer of quality MonoBlock & Industrial Burners, boilers, containerized boiler rooms. Burners can operate on gaseous (natural gas, propane-butane, low-heating gases - biogas, waste gas, coke gas etc.), liquid(diesel, light and heavy heating oil) or combi fuels. Power range 200 kW - 80 MW.

    based in Trebíc, CZECH REPUBLIC.

  • ZEZ PRAHA a.s

    Industrial furnaces * Ceramics furnace * Generator of controlled atmosphere * Electric resistance furnace * Heat-Treatment of Metals * Surface Treatment * Melting and Foundry. Our firm is a reliable partner for realization of technologic units ranging from project documentation up to erection and putting into operation. ZEZ Praha Co. has following activities: Guidance and ...

    based in Hloubetín, CZECH REPUBLIC.

  • K&K TECHNOLOGY a.s.

    K&K TECHNOLOGY a.s. is an engineering-supplier company focused in the long term on comprehensive services and deliveries serving to plan and protect the environment, aiming at: Municipal, industrial and agricultural waste water treatment plants, Drinking and industrial water treatment plants, Sludge management and processing, Biogas plants, Boiler rooms and heat ...

    based in Klatovy, CZECH REPUBLIC.

  • Water Treatment Engineering Company (WTE)

    Activity of Water Treatment Engineering Company is aimed at development of water treatment technologies and production of required equipment. We offer individual innovative process solutions and high-quality service. Our Company uses individual approach to solution of process issues in water preparation and projects implementation. Our Company offers innovative process ...

    based in Praha 10, CZECH REPUBLIC.

  • EnviTec Biogas AG

    EnviTec Biogas is Europe’s leading manufacturer of biogas plants with an installed capacity of more than 385 MWel. EnviTec Biogas covers the entire value chain for the production of biogas, including the planning and turnkey construction of biogas plants and biogas upgrading plants as well as their commissioning. The company takes charge of biological and technical ...

    Office in Velké Mezirící, CZECH REPUBLIC.

  • Körting Hannover AG

    The outward appearance of Körting Hannover AG has changed over the years – the pillars of success however have remained: specialisation in a leading trade mark engineering of products and know-how, entrepreneurship and employees with a marked engagement in the company. Team-thinking and discussions with our customers smooth the way to optimum results. Quick decisions ...

    Distributor in Praha 10, CZECH REPUBLIC.

  • Guntamatic Heiztechnik GmbH

    GUNTAMATIC is committed to the development and establishment in the market of renewables throughout the European area it represents the future of biomass heating systems. The company is genuinely engaged with the aim of producing high quality products in its advanced production facilities. Customers exposed to this infectious enthusiasm should come away equally enthused. ...

    Distributor in Kostelec nad Čermými lesy, CZECH REPUBLIC.

  • Premium

    Munters Zeol Division

    Munters Zeol is the industry leader using Zeolite Rotor Concentrators for low concentration VOC abatement. Munters Zeol employs a team of engineers to design the most suitable, low cost solution to your VOC abatement problem. We use our own HoneyCombe rotors with hydrophobic zeolites to adsorb and concentrate the VOC stream. The smaller, concentrated stream is then ...

    Office in Brno, CZECH REPUBLIC.

  • LDM, spol. s.r.o.

    LDM spol. s r. o. was founded by three owners in the mid of 1991. From the very beginning it has always been and also for the future will be focused on production of industrial valves. The history of production of industrial valves in Česká Třebová is dated from 1909 when Mr. Josef Jindra founded a company with the homonymic firm name. In 1919 he joined with Mr. ...

    based in Ceská Trebová, CZECH REPUBLIC.

  • Premium

    Aeration Industries International (AII)

    We are a creative team of engineers, designers, technicians, and strategic thinkers who are passionate about water. We are determined to conceptualize, design, and deliver solutions that fit your unique needs.Aeration Industries International has the expertise and aeration equipment to provide a full range of wastewater treatment solutions to optimize municipal and ...

    Distributor in Rohatec, CZECH REPUBLIC.

  • Premium

    PBS Velká Bíteš, a.s.

    PBS Velká Bíteš is a precision engineering company, the manufacturer of high-speed turbine machines for the aerospace, power and transport industries. Our business covers a wide range of engineering areas, including the manufacture of precision castings, hi-tech machining of metals, electroplating and subsequent assembly of finished products. Our customers appreciate ...

    based in Velká Bíteš, CZECH REPUBLIC.

  • Premium

    Presona AB

    The Presona balers are designed and built at our modern manufacturing facility in Sweden where focus is on efficiency, quality, safety and sustainability. Our balers are reliable, consistent and efficient. They are also designed to cope with rugged manufacturing, recycling and waste management environments.With a baler from Presona you will benefit from high material ...

    Office in Prague 9, CZECH REPUBLIC.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you