Only show results in Virginia? Ok

Municipal Solid Waste Separation Companies

  • Premium

    ANDRITZ Separation - a division of the Andritz Group

    ANDRITZ Separation, trusted partner for process solutions for waste water treatment. There is a wide range of challenges in municipal drinking water and waste water treatment: whereas in developing countries the focus is often on setting up a base structure for drinking water and wastewater, in industrialized countries water quality, efficiency and recycling of residual ...

    based in Graz, AUSTRIA.

  • IBC s.a.l. Municipal Solid Waste Treatment Plant

    IBC is an environmental consulting company that develops, manages and engineers environmental sustainable projects in the Middle East by: adopting an integrated management process for MSW and Wastewater. Abandoning landfills and waste incineration. Considering MSW and Wastewater as a resource to recycle into re-usable component. Introducing Anaerobic and Aerobic ...

    based in Beruit, LEBANON.

  • Hellenic Solid Waste Management Association (HSWMA)

    Hellenic Solid Waste Management Association is the National member of Internation Solid Waste Association for Greece. Our company is acting as representative on commission basis. Main business lines: automotive parts, industrial supplies and machinery. We are looking for companies manufacturing machinery and equipment for waste disposal and recycling, in order to ...

    based in Athens, GREECE.

  • Integrity Municipal Systems (IMS)

    Integrity Municipal Systems (IMS) is a specialty engineering company devoted to the design and supply of innovative, pre-assembled, process solutions for the water and wastewater industry. Standard and customized Fluoride and Ammonia Feed Systems have been developed to fulfill a need in the drinking water industry for complete, packaged, fully-functional, delivery systems ...

    based in Poway, CALIFORNIA (USA).

  • Municipal Equipment Company

    Municipal Equipment Company specializes in the equipment required to treat or move water in municipal, commercial, and industrial settings. We have been focusing on the lowest total cost of equipment ownership since 1989.

    based in St. Louis, MISSOURI (USA).

  • Institute for Sanitary Engineering, Water Quality and Solid Waste Management (ISWA)

    The main tasks of ISWA are research and education as well as supporting federal and state agencies, municipalities and industry in developing solutions for practical problems. This can be accomplished, for example, through external studies of existing plants or research facilities or by providing a collection of basic data on the design and planning of treatment ...

    based in Stuttgart, GERMANY.

  • Premium

    Flexus Balasystem AB

    Flexus Balasystem AB is a Swedish manufacturer located in Nossebro (near Göteborg) with a long experience of designing and manufacturing systems for municipal solid waste, RDF, SRF, recycling and agricultural materials. The unique Flexus round-bale technology pioneered in Sweden and, with well over a hundred installations worldwide, is the optimum solution for the ...

    based in Nossebro, SWEDEN.

  • Premium

    WesTech Engineering, Inc.

    WesTech Engineering, Inc. celebrates 40 years as a recognized leader in the manufacture of liquid/solids separation equipment for industrial and municipal process applications. Surface waters, groundwater, water reuse, drinking water, wastewater treatment and industrial process equipment and technologies designed to meet customer specifications, and exceed performance ...

    based in Salt Lake City, UTAH (USA).

  • Separator Sp. z o.o.

    SEPARATOR as continuator of AVM, since 1993 deals with transport, thickening and dewatering of municipal and industrial sludges, biogas purification and utilisation and instruments for on-line measurement and monitoring of process parameters. Our installations are based on equipment manufactured by well-known and highly valued Swedish, German and Dutch manufacturers. ...

    based in Gdynia, POLAND.

  • Premium

    Valvan Baling Systems NV

    Valvan Baling Systems is an engineering company that specializes in the design and construction of hydraulic baling presses and accessories. Our biggest target sector is the recycling industry. Our product range of baling presses is suitable for processing natural and synthetic fibers, RDF, paper, cardboard, plastics, municipal solid waste, second hand clothing, We are ...

    based in Menen, BELGIUM.

  • Separation Specialists Inc.

    Separation Specialists is a manufacturing and service company supplying water-treating equipment and parts to the petroleum and industrial markets. Refurbished flotation units are available. Our focus is parts and service of the following flotation equipment: Wemco Depurator `1 1`, Petrolite, US Filter, Quadricell. Products and services are also offered for other ...

    based in Bakersfield, CALIFORNIA (USA).

  • Premium

    Process Wastewater Technologies LLC

    Process Wastewater Technologies LLC is a leading global manufacturer of products for biological treatment, CSO/SSO, biosolids/sludge handling and municipal wastewater. We revolutionized the storm water and CSO treatment industry in the early 1990s by introducing continuous deflective separation technology to the market. We offer technologies for gross solids and sediment ...

    based in Rosedale, NORTH CAROLINA (USA).

  • World Waste Systems, LLC

    World Waste Systems designs, builds and manages municipal solid waste management recycling and composting waste systems (recycling facilities) that range in size from 50 tons per day to 2,000 tons per day and operate at a fraction of the cost of our competitors. We specialize in recycling municipal solid waste, residential and commercial waste, industrial waste and ...

    based in Ocala, FLORIDA (USA).

  • Mohr Separations Research, Inc. (MSR)

    MSR oil water separator green technologies help clean the environment and reduce / control industry pollution in and around facilities. Our gravity separator equipment utilizes coalescing plate media, removing oil droplets from flowing water. Unique designs means no moving parts or consumable parts ensures only minimum maintenance is required. MSR media is permanent and ...

    based in Lewisville, TEXAS (USA).

  • Odense Waste Management Company Ltd

    Odense Waste Management Company covers the Municipality of Odense having around 185 000 inhabitants. With roots more than a 100 years back it was in 1994 transformed from a municipal waste management department into a limited company owned by the municipality.

    based in Odense, DENMARK.

  • Premium

    Veolia Water Technologies Techno Center Netherlands B.V. - MPP Systems

    MPP Systems is a business activity specialized in developing, marketing, manufacturing and servicing water purification systems based on Macro Porous Polymers (MPP). The Macro Porous Polymer Extraction (MPPE) system is highly effective, fully automated, remote controlled and guaranteed technology for removing dissolved and dispersed hydrocarbons from water by means of ...

    based in Ede, NETHERLANDS.

  • Premium

    BioCycle Magazine

    Published since 1960, BioCycle is the go-to magazine and website on composting, organics recycling, anaerobic digestion and renewable energy.Each monthly issue of BioCycle shows you how to process organic residuals such as yard trimmings, food waste, woody materials, biosolids, manure, high strength organic wastes, municipal solid waste (MSW), and other source separated ...

    based in Emmaus, PENNSYLVANIA (USA).

  • Premium

    Anguil Environmental Systems, Inc.

    Anguil Environmental is an air pollution control, water treatment, and energy recovery system provider to the global manufacturing sector and industrial markets. The company is uniquely capable of supplying integrated air and water treatment solutions for environmental compliance. On vapor combustion applications, Anguil has over four decades of experience with the ...

    based in Milwaukee, WISCONSIN (USA).

  • Premium

    Presona AB

    The Presona balers are designed and built at our modern manufacturing facility in Sweden where focus is on efficiency, quality, safety and sustainability. Our balers are reliable, consistent and efficient. They are also designed to cope with rugged manufacturing, recycling and waste management environments.With a baler from Presona you will benefit from high material ...

    based in Tomelilla, SWEDEN.

  • Premium

    SPINPRO

    Dewatering Expertise and Technologies involve the removal of water from solid material or soil by wet classification, centrifugation, filtration, or similar solid-liquid separation processes, such as removal of residual liquid using pressure like a filter press. We are constantly striving to provide our customers the most cost efficient and effective products, services ...

    based in Bellingham, WASHINGTON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you