Only show results in Virginia? Ok

On-Site Mould Contamination Testing Companies

  • Poly-Test Instruments

    Based in Gauteng, South Africa, Poly-Test Instruments represents International manufacturers of production equipment, materials testing and analytical instruments. The companies emphasis is on cost-effective quality in the manufacturing environment. In addition to supplying instrumentation and systems, the company also provides Project Management and a consultancy service ...

    based in Boksburg, SOUTH AFRICA.

  • Free Form Plastics

    Free Form Plastics was established in 1991 to produce rotationally moulded components that meet the high quality requirements of Western Canada`s leading agricultural equipment manufacturers. Free Form Plastics has designed moulds and manufactured an extensive array of high quality plastic components that have been used in a whole host of applications, including ...

    based in St. Brieux, SASKATCHEWAN (CANADA).

  • Pinchin Ltd. - part of the Pinchin Group of Companies

    Pinchin Ltd. as part of the Pinchin Group of Companies, is one of Canada`s largest Environmental, provides services in Building Science & Sustainability, Environmental Due Diligence, Air & Noise Emissions, Climate Change GHG, Occupational Health & Safety, Indoor Air Quality & Microbial Contamination, Hazardous Materials (Asbestos, Mould, Lead, Radon), Laboratory Services ...

    based in Mississauga, ONTARIO (CANADA).

  • Faraplan S.P.A.

    Faraplan, a specialist in the processing (or extrusion moulding) of PVC and PE, is a leading manufacturer of pipe and fitting systems for the construction, water supply, sewer, plumbing and irrigation sectors. The product range comprises PVC pipe and fitting systems for industrial wastewater, domestic drains and the conveyance of drinking water, as well as corrugated HDPE ...

    based in Fara Vicentino, ITALY.

  • Sinterplast S.p.A.

    Sinterplast has been manufacturing products in recyclable polyethylene using rotational moulding techniques since 1988. This is a “clean” and ecological technique, because it doesn`t resort to the use of chemical solvents or other polluting agents, and it is effective because it allows you to create large sized products in one single piece, without any joints or ...

    based in CISERANO (BG), ITALY.

  • Mr Natural Environmental Engineers

    Mr. Natural distributes cutting edge ultra violet hydroxyl generating technology which has been at the forefront of high volume odour processing, air-decontamination and air-purification for the past decade. Patented technology that is the world’s ONLY scientifically proven non-contained Hydroxyl Generator. This non-chemical device provides an environmentally safe ...

    based in Vancouver, BRITISH COLUMBIA (CANADA).

  • Premium

    Bertin Technologies

    Bertin Technologies is an international leader company in multi-disciplinary sectors including Life Sciences, Defense, Aerospace, Environment & Energy. Bertin Technologies offers a full range of Laboratory equipment with 2 different ranges designed for biological sample preparation (Precellys) and air contamination control (Coriolis). Precellys is a range of robustness ...

    based in Montigny - Le - Bretonneux, FRANCE.

  • Telford Smith Engineering Pty Ltd

    For over 70 years Telford Smith has supplied a huge range of new & used machinery & equipment for plastics processing industries worldwide. We have everything including extruders & complete extrusion lines, recycling & reclaim machines, modular washing plants, moulding machines, as well as ancillary & automation equipment within one of the worlds largest range of new & ...

    based in Dandenong, AUSTRALIA.

  • Quest Technology (S) Pte Ltd.

    Incorporated in 1985, Quest Technology (S) Pte Ltd has grown to become a regional leader in micro-contamination control engineering services specialising in designing and building of cleanrooms and clean air devices including: ACMV/HVAC systems, cleanroom performance testing and certification, Sales, calibration, maintenance and servicing of air/liquid/gas/vacuum ...

    based in Singapore, SINGAPORE.

  • Premium

    Bilgeri EnvironTec GmbH

    EnvironTec is an Austrian engineering firm specializing in biogas technology. We manufacture equipment and offer engineering and consulting services. Our main focus are biogas lines at Sewage and industrial Wastewater Treatment Plants (WWTPs) but also landfill gas and other special applications. The portfolio includes accessories for digesters (gas domes, foam traps, ...

    based in Fussach, AUSTRIA.

  • Maschinenfabrik Hombak GmbH (MHG)

    The company was founded in late 1967 manufacturing state of the art wood flaking equipment installed in the panel board industry all over the world. Today a wide variety of machines and systems for mechanical process technologies is provided such as size reduction and size enlargement, classifying, separating, mixing, washing and drying equipment. The companies main field ...

    based in Zweibrücken, GERMANY.

  • Aerobiology Laboratory Associates, Inc.

    Our services include a complete range of sampling and analysis of indoor environments for bioaerosols, and the identification of biological sources of IAQ problems. In addition to a full range of microbial culture analysis, our microbial services include: Non-viable spore trap analysis from Burkard in support of standard culture methods for mold assessment and ...

    based in Dulles, VIRGINIA (USA).

  • SEL Environmental Ltd

    For nearly 20 years SEL have assisted Consultants, Engineers and Contractors throughout the UK in overcoming in ground problems. We have a broad range of innovative solutions, services and products that could be of assistance, especially if your site has any abnormals with the ground such as high water table, unstable soils, high rock head, contaminated soils or gassing ...

    based in Blackburn, UNITED KINGDOM.

  • Microbac Ltd

    Microbac is a privately owned company with 30 years experience in microbial biomass engineering, offering complete wastewater treatment packages to worldwide clients. Our services comprise design, planning, procurement, fabrication, equipment supply, installation, commissioning and testing. A wide range of adapted biological products, including customised bacterial ...

    based in Consett, UNITED KINGDOM.

  • Premium

    Joraform AB

    Joraform has developed and market compost machines for local composting of domestic waste. Our clients are primarily tenant-owner`s associations, housing firms, building companies, schools and institutional kitchens. At present Joraform has delivered more than 1000 automatic compost machines, in Sweden as well as abroad. Joraform is a company with extensive experience in ...

    based in Laholm, SWEDEN.

  • Normrock Industries

    Normrock Industries was founded in 1987. The company`s line of business includes the manufacturing of Amphibious fluid transfer equipment. Building dependable transfer units for tailing pond operations has been Normrocks focus for the last 6 years. We have invested heavily in R&D and increased our unit sizes to oil sands standards. Amphibex units have been severely tested ...

    based in Terrebonne, QUEBEC (CANADA).

  • Euro Environmental

    Euro Environmental Ltd is an environmental and occupational hygiene consultancy. We aim to provide a high quality of service to our clients and offer flexible, tailored solutions to problems. Euro Environmnetal will carry out a Legionella Risk Assessment on domestic and process water systems and follow up by planning and implementing a monitoring regime, in consultation ...

    based in Doncaster, UNITED KINGDOM.

  • Dakro Environmental Limited

    Dakro Environmental Limited is a company committed to quality products and service. Dakro Environmental’s policy is to ensure that all their customers’ sites are fully compliant, and advise of any non compliance to the current legislation. Services offered in the control of legionellosis include: risk assessment; water treatment services; hot and cold water monitoring and ...

    based in West Midlands, UNITED KINGDOM.

  • JFM Environmental Limited

    JFM Environmental Limited is an environmental consulting firm specializing in geoscientific and environmental engineering. Founded in 1993, JFM has expanded its services to include a full range of environmental solutions, as well as the management of those solutions to clients looking for cost effective methods of assessing, quantifying and then effectively dealing with ...

    based in London, ONTARIO (CANADA).

  • Mycometer

    Mycometer develops flexible and versatile methods of documentation and delineation of microbial contamination in buildings and water systems. Our technology is the Swiss knife of rapid microbiology allowing reliable quantification of microbes in almost all environments: on surfaces, inside porous materials, in water, in diesel and slurries, in air. Using the same ...

    based in Horsholm, DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you