LNI Swissgas

5 products found

LNI Swissgas Products

  • Premium Gas Calibration Systems - Gas Calibrators

    LNI Swissgas has developped a wide range of gas calibration systems which exactly fits the need of air pollution monitoring network. Depending on the device, you are able to dilute high concentration ppm gas cylinders to ppb values (Mass flow controllers and sonic nozzles dilution are available). The gases like NO2, SO2, BTEX, NH3… can be generated by permeation. The ozone is generated by an internal UV controlled ozone generator and can be used to perform a Gaseous Phase Titration (G

  • Sonimix - Model 2130 - NOx Converter Tester

    Sonimix - Model 2130 - NOx Converter Tester

    The Sonimix 2130 NOx converter tester has been designed to generate a stable NO2 concentration with a small reaction time. It is based on the sonic nozzles technology (ISO 6145-6 technology) and high stability pressure regulators. The NOx converter tester is often used together with a multi-steps gas divider also based on sonic nozzles and high precision pressure regulators. In order to validate NOx measurements, the efficiency of the NO2 converter...

  • Sonimix - Model 4001 - NOx Converter Tester

    Sonimix - Model 4001 - NOx Converter Tester

    The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 L/min and 10 ppm to 35 ppm at 0.9 L/min.

  • Sonimix - Model 6000 C1 - Permeation Multigas Calibrator

    Sonimix - Model 6000 C1 - Permeation Multigas Calibrator

    The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 analysers, and to determine the converter’s efficiency of the NOx monitors. The interface allows to Configure...

  • Sonimix - Model 6000 C2 - Multi-Points Multigas Calibrator

    Sonimix - Model 6000 C2 - Multi-Points Multigas Calibrator

    The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with – an inlet for high concentration mixtures of diluted gases such as NO, NO2, SO2, CO, HC, BTX or mixtures of...