52 products found
M.A.E. Advanced Geophysics Instruments Products
-
Seismics - Active Seismic Monitoring
-
MAE Sysmatrack - 12 Channel Seismograph, Expandable to 24 Channels, 24 Bit Resolution With Integrated Battery
24 bit seismograph for seismic prospecting with refraction, reflection survey, active and passive MASW (Re.Mi.), SASW, Down-hole, Cross-hole methods. Unit is equipped with 24 bit resolution acquisition board and is available in 12 channels version expandable to 24. Two 24 pole connectors for seismic cables of 12 channels each, starter connector, 12V charging takeout and USB interface (optional) to connect notebook or PC for instrument management are ...
-
MAE - Model TRG14 - Starter Vertical Geophone
Starter vertical geophone with cable and connector used to start recording in ...
-
MAE - Model GH10 - Horizontal Geophone 10 Htz
Horizontal 10 Hhz geophone with 1 m lead cable, double clip or split spring (single spring) connector available upon ...
-
MAE - Model GV40 - Vertical Geophone 40 Htz
40 Hz Vertical Geophone with 1m of cable, double clip connector or split spring (single clamp) available upon ...
-
MAE - Model TOMOKIT - Seismic Tomography Kit
Kit for non-destructive structural investigations with seismic tomography for verification of quality preservation status of construction materials, ideal for: beams (wooden also), masonry walls, columns in stone material, masonry works with poor degree of material homogeneity, works of historical and cultural interest. This survey method is used to identify physical-geometrical anomalies inside structures or individual structural elements with a ...
-
MAE - Model CPS1205 - Geophone Connection Seismic Cable
Array cable for seismic prospection, 12 takeouts, spacing 5 m, 5 m starting, pur yellow cable. Seismic cable for geophones connection to Mae instruments. Due to multitouch cable with flexible TPE insulation and yellow polished PUR sheath, Mae cables feature an high resistance to drag and wear in general. Connecting bushes, of mueller clip type, are stored in shells of a special blend of plastic material which makes them resistant and at the same time ...
-
Seismics - Passive Seismic Monitoring
-
MAE - Model S3S - 3D Seismic Surface Sensor
3D seismic surface sensor, 4,5 hz frequency geophones, aluminum case, support bases to use on floor or to be fixed into ground, level bubble, transport handle. 3D surface sensor manufactured according to highest quality standard, 10 mm aluminum case which can ensure stable positioning of internal components, external oxidation for a finishing that facilitates cleaning after field use. This sensor can be connected to all Mae instruments related to Active ...
-
MAE - Model S3S2 - 3D Seismic Surface Sensor
3D seismic surface sensor, 2 hz frequency geophones, aluminum case, support bases to use on floor or to be fixed into ground, level bubble, transport handle. 3D surface sensor manufactured according to highest quality standard, 10 mm aluminum case which can ensure stable positioning of internal components, external oxidation for a finishing that facilitates cleaning after field use. This sensor can be connected to all Mae instruments related to Active ...
-
Model SEISMONITOR - 3D Surface Sensor 1Hz Frequency
3 components Seismonitor is designed for seismological, engineering and scientific studies where a passive, low noise, short period triaxial sensor is required. Seismonitor contains three triaxially oriented, GS-1 low frequency seismometers installed in a single deployment ...
-
Seismics - Seismic Monitoring
-
MAE - Model SISMALOG - Stand-Alone Seismograph for Seismology and Local Events Monitoring
Stand-alone seismograph, 3 channels modular, 24 bit, 100-3500c/s, Li-Ion batteries. Stand-alone seismograph for seismology and local events monitoring. This unit is designed for recording and automatic storage of every seismic event either on internal SD memory or by sending data to collection centre according to set modalities. It can be totally handled from PC using usb interface (local-control) or by web (remote-control). To recover data stored in unit ...
-
MAE - Model S1SS - 1D Seismic Sensors for Seismic Monitoring, 4.5 Hz Frequency
Single component seismic sensor designed according to highest quality standard, with case for outdoor installation and maximum protection of internal components. It can be connected to Mae instruments for Seismic Monitoring and building continuous monitoring. Rapid and practical fixing due to fins with predetermined holes, in case of fixing on vertical walls it is possible to use L mounting bracket supplied together with sensor. Its connection to ...
-
MAE - Model S3S2S - 3D Seismic Sensors for Seismic Monitoring 2 hz
3D seismic sensor designed according to highest quality standard, with case for outdoor installation and maximum protection of internal components. It can be connected to Mae instruments for Seismic Monitoring and building continuous monitoring. Rapid and practical fixing due to fins with predetermined holes, in case of fixing on vertical walls it is possible to use L mounting bracket supplied together with sensor. Its connection to recording unit is ...
-
Model S3SS - 3D Seismic Sensor for Seismic Monitoring 4.5 Hz
3D seismic sensor designed according to highest quality standard, with case for outdoor installation and maximum protection of internal components. It can be connected to Mae instruments for Seismic Monitoring and building continuous monitoring. Rapid and practical fixing due to fins with predetermined holes, in case of fixing on vertical walls it is possible to use L mounting bracket supplied together with sensor. Its connection to recording unit is ...
-
MAE - Model S3SA100S - 3D Accelerometer Sensor for Seismic Monitoring 100mV/g
3 components accelerometer sensor for structural and environmental seismic monitoring, accuracy of 100 mV/g, housed in an aluminum IP-67 protection rate case with embedded fixing flaps; ideal for installation in hard environments, it is supplied with IP-67 12 male Amphenol connector with protective cap and orange polish PUR cable. Aluminum mounting bracket is supplied together with sensor, in order to allow installation both on horizontal and vertical ...
-
MAE - Model S3SA1S - 3D Accelerometer Sensor for Seismic Monitoring 1 V/g
3 components accelerometer sensor for structural and environmental seismic monitoring, accuracy of 1 V/g, housed in an aluminum IP-67 protection rate case with embedded fixing flaps; ideal for installation in hard environments, it is supplied with IP-67 12 male Amphenol connector with protective cap and orange polish PUR cable. Aluminum mounting bracket is supplied together with sensor, in order to allow installation both on horizontal and vertical ...
-
MAE - Model S1SA100S - 1D Accelerometer Sensor for Seismic Monitoring 100mV/g
Single component accelerometer sensor for structural and environmental seismic monitoring, accuracy of 100 mV/g, housed in an aluminum IP-67 protection rate case with embedded fixing flaps; ideal for installation in hard environments, it is supplied with IP-67 12 male Amphenol connector with protective cap and orange polish PUR cable. Aluminum mounting bracket is supplied together with sensor, in order to allow installation both on horizontal and vertical ...
-
MAE - Model S1SA1S - 1D Accelerometer Sensor for Seismic Monitoring 100mV/g
Single component accelerometer sensor for structural and environmental seismic monitoring, accuracy of 1 V/g, housed in an aluminum IP-67 protection rate case with embedded fixing flaps; ideal for installation in hard environments, it is supplied with IP-67 12 male Amphenol connector with protective cap and orange polish PUR cable. Aluminum mounting bracket is supplied together with sensor, in order to allow installation both on horizontal and vertical ...
-
Geoelectrics - Multielectrode
-
MAE - Model X612EM+ - VHR Multichannel Resistivity Meter 48-72-96 Embedded Channels
X612EM+ MAE response to new demands of high resolution and 3D analysis for geoelectrical measures. Instrument embeds all necessary for VES and multielectrode geoelectric prospection with 48, 72 and 96 embedded electrodes. Main feature of the instrument is the great performing speed both for 2D and 3D surveys, due to new and innovative data recording platform which allows data recording an almost all channels simultaneously. X612EM+ has "preview" function, ...
-
MAE - Model CE26V26VM250 - Link Box Extension Cable
Extension cable for multielectrode box X612EM, cable in yellow PUR, length 250 mt, supplied in no.2 section of 125 mt each, including no.2 cable reels. MAE multipolar extension cable are made through flexible connectors with TPE insulation and yellow PUR sheath, characterized by high resistance to entrainment and usury. Extension cables are supplied with standard military connector with bayonet (Amphenol) characterized by maximum strength and durability, ...
-
MAE - Model CPE2403 - Geoelectric Prospection Cable for Electrodes Connection
Pur cable for geoelectric prospection, 24 takeouts, 3 mt spacing. Geoelectric prospection cable for electrodes connection to Mae instruments. Due to multitouch cable with flexible TPE insulation and yellow polished PUR sheath, Mae cables feature an high resistance to drag and wear in general. Connecting bushes, of mueller clip type, are stored in shells of a special blend of plastic material which makes them resistant and at the same time ...
-
MAE - Model CPEM2405 - Marine Geoelectric Prospection Cable
Cable for marine geoelectric prospection, 24 takeouts, 5 mt spacing. Marine geoelectric prospection cable manufactured through flexible connectors with TPE insulation and yellow PUR sheath, characterized by high resistance to entrainment and usury in general. Connecting bushings are made of graphite. Cables are supplied with standard military connector with bayonet, characterized by maximum strength and durability, equipped with protective caps to avoid ...
-
Geoelectrics - Quadrupole
-
MAE - Model C313SEV - Georesistivimeter for Quadrupole Measurements
Digital Georesistivimeter for Vertical Electric Surveys. Equipment is characterized by maximum resolution and accuracy in geoelectric survey and great functioning rapidity. Once data acquisition is completed, data can be immediately processed with related data processing software. Power is supplied by embedded battery pack and it is managed through a microprocessor able to provide wide autonomy of acquisition. Recording and saving of data takes place on ...
-
MAE - Model CEBBM250B - Blu Unipolar Cable Reel
Unipolar cable for connecting N pole electrode in quadrupole surveys, equipped with stainless steel spring plug connector and PVC protective cap to ensure best connection between electrode and cable and to protect connector from weathering. MAE unipolar cables are manufactured with flexible conductors with TPE insulator and blu PUR sheath, and are characterized by high resistance to usury. Quality of materials makes transport and cables connection to ...
-
MAE - Model CEBBM250R - Red Unipolar Cable Reel
Red unipolar cable reel, 250 mt length, for VES M pole. Unipolar cable for connecting M pole electrode in quadrupole surveys, equipped with stainless steel spring plug connector and PVC protective cap to ensure best connection between electrode and cable and to protect connector from weathering. MAE unipolar cables are manufactured with flexible conductors with TPE insulator and red PUR sheath, and are characterized by high resistance to usury. Quality of ...
-
MAE - Model CEBBM500B - Blue Unipolar Cable Reel
Blu unipolar cable reel, 500 mt length, for VES B pole. Unipolar cable for connecting B pole electrode in quadrupole surveys, equipped with stainless steel spring plug connector and PVC protective cap to ensure best connection between electrode and cable and to protect connector from weathering. MAE unipolar cables are manufactured with flexible conductors with TPE insulator and blu PUR sheath, and are characterized by high resistance to usury. Quality of ...
-
MAE - Model CEBBM500R - Red Unipolar Cable Reel
Red unipolar cable reel, 500 mt length, for VES A pole. Unipolar cable for connecting A pole electrode in quadrupole surveys, equipped with stainless steel spring plug connector and PVC protective cap to ensure best connection between electrode and cable and to protect connector from weathering. MAE unipolar cables are manufactured with flexible conductors with TPE insulator and red PUR sheath, and are characterized by high resistance to usury. Quality of ...
-
Non Destructive Tests on Concrete
-
MAE - Model SONIC15 - Ultrasonic Pulse Velocity and Sonic Test
SONIC15 is a device for non Destructive Tests with ultrasonic pulse velocity and sonic tests on masonry through instrumented hammer. It also supports expansion for surveys on foundation piles with P.I.T. methodology. In spite of compact dimension of the unit, there is a wide monitor of 7’’ with integrated touch screen which allows to use it on site in immediate and effective ...
-
MAE - Model WCH4 - Modular Wireless Instrument for Cross-Hole Surveys on Foundation Poles
WCH4 is an innovative modular wireless instrument for cross-hole tests on foundation poles. System core are motorized reels electronically controlled on which are mounted hig-power borehole probes for cross-hole investigations on foundation poles, diaphrams, and all those infrastructural cement or concrete works that could be verified by cross-hole tests, that is through discent in tubes prepared at casting and subsequently filled by water. Each reel of ...
-
MAE - Model CRONOSONIC - Ultrasonic Pulse Velocity Tester (Ultrasonic Timer)
Cronosonic is an instrument for ultrasonic pulse velocity through transparency which can be used to investigate poles, truss, diaphrams, laboratory samples and many other structures made of concrete or stone. It performs measurements with direct, indirect and semi direct method. Very compact instrument is provided with display for realtime visualization of the time of fly (T.O.F.) and velocity of investigated material. Measurements can be transferred to a ...
-
Non Destructive Test - Echo Tester
-
MAE - Model S1SA1 - Accelerometric Sensors
One-dimensional accelerometric sensor for echometric test on foundation poles, P.I.T. Pile Integrity ...
-
Model CET4DUSMA5M - Connecting Cable for Echotest Accelerometer
Connecting cable for S1SA1 accelerometer and SONIC15 instrument for echometric test on foundation poles. SMA connector sensor side, 4 poles ODU connector instrument side, 5 mt length, interlaced conductors with TPE insulator, polivynil chloride PVC black sheath, highly resistant against usury in ...
-
Thermal Conductivity Non Destructive Test
-
MAE - Model CTS45 - Thermal Conductivity Probe
CTS45 is a probe for measuring the conductivity in laboratory on samples , length: 45 cm, that offers the possibility to perform a practical and fast measurement of the thermal conductivity (or thermal resistivity) of the medium in which it is inserted at a high accuracy level. It works in compliance with the ASTM D 5334-00, D 5930-97 and IEEE 442-1981 standards. The probe has proven its suitability for soils, thermal backfill materials, sediments, ...
-
Model CTS120 - Soil Thermal Conductivity Probe
CTS120 is a probe, for measures in the soil (lenght = 120 cm), that offers the possibility to perform a practical and fast measurement of the thermal conductivity (or thermal resistivity) of the medium in which it is inserted at a high accuracy level. It works in compliance with the ASTM D 5334-00, D 5930-97 and IEEE 442-1981 standards. The probe has proven its suitability for soils, thermal backfill materials, sediments, foodstuff, powders, sludges, ...
-
Model CTP120 - Drilling Tip
Drilling Tip 18 mm diameter, installed on a stainless steel bar of 1,25 mt length. Used to drill survey hole where probe for the measure of soils thermal conductivity is ...
-
TCR24 - MEASURE OF SOIL THERMAL CONDUCTIVITY
TCR24 is designed to measure soil heat transmission (soil tendency to transmit heat). This type of survey is usually carried out prior to install underground pipes, or prior to build geo-thermic wells to detect heat from the soil, for buildings heating or conditioning. Measurement can be done on site with the probe supplied, up to a depth of 120 cm, or in case of greater depths, it is possible to pick up samples of compact ground (logs) and perform ...
-
Non Destructive Test - Frequency of Resonance
-
MAE - Model RFT321 - Digital Instrument for Measuring the Longitudinal, Torsional and Flexional Resonance Frequency
RFT321 instrument calculates frequency of longitudinal, torsional and flexional resonance on concrete or natural stone samples in order to determine Modulus of Elasticity, damping factor and to analize deterioration caused by the freeze-thaw cycles of material which is investigated. Instrument RFT321 is provided with PC embedded board and colour LCD monitor with integrated 7" touch-screen. SD removable memory on front panel ensures a quick and safe ...
-
Model C311RRM - PVC Reference Sample for C311R
Reference sample to verify correct functionality of instrument C311R for resonance tests. Sample can be used for periodic execution of cycles of measurement aimed to verify correspondence of acquired parameters with those indicated on reference certificate. Sample is equipped with three permanent hocking points, so it will be enough to screw the sensor on these points and perform measurement with the canonical procedure and make comparison with results ...
-
Model CFRBCSMA1M - Accelerometer Connecting Cable for Resonance Frequency Meter
Connecting cable for accelerometer and C311R instrument for resonance frequency meter. SMA connector sensor side, 4 poles ODU connector instrument side, 1 mt length, interlaced conductors with TPE insulator, polivynil chloride PVC black sheath, highly resistant against usury in ...
-
Model C311SP - Sample Stand With Clamps
Optional accessory for C311R instrument, which allows to position and to block investigated samples in right positions as required by the normative. Lateral removable supports permit the regulation along sliding guides; as soon as the correct position has been established, it is possible to block them by using lateral control knobs. Threaded bars of the central bench vises can be removed in order to facilitate transport and to increase the height of the ...
-
Non Destructive Test - Phreatimeters
-
MAE - Model FRT100 - Water Level Indicator With Temperature Sensor and Bottom-Hole Indicator
Water level indicators FRT are all equipped with temperature sensor and display located on cable reel frontal panel where metered cable with copper conductors and central Kevlar support is placed. Presence of temperature display and bottom-hole indicator with acoustic and visive signal (on instrument display FP is visualized), together with easy to use feature (instrument operates through one only button and its power source is a common 9V battery easily ...
-
Non Destructive Test - Monitoring
-
MAE - Model DL8M - 4 Channels Wired Data Logger
4 channels wired data logger, expandable to 8 channels, 24 bit, bluetooth configuration, lithium battery. DL8M is the ideal solution for all environmental or structural moniotoring in which high resolution, velocity of implementation and low costs of system management are required, together with the greatest simplicity in management and processing acquired data. DLM8 allows to briefly and easily realize indipendent systems of monitoring whose acquired ...
-
Model FV85W - Photovoltaic Power Supply Kit 80W
Specially studied kit to power monitoring system when there is no electric network or as buffer battery to secure the operating of monitoring station. Solar panel together with the high yield of regulator of charge and the high quality of batteries allows to keep the level of charge at its best also in bad environment conditions. If there is lack of solar radiation for a long time, batteries are protected against complete discharge of the automatic ...
-
Model MA314236IP - Outdoor Cabinet
ABS cabinet for outdoor installation with IP-67 protection rate. Nominal dimensions: 310x425x360 mm. Operating dimensions: 316x427x160 mm. Characteristics: UV resistance (EN 62208). Shock resistance: IK10. Dissipating power: 39 W. Isolation voltage: 1000 V. Door typology: blind door. Protection rate: IP67. Material: reinforced polyester with glass fiber. Operating temperature: 25 +60 °C. Material: Halogen free according to EN 60754-2 regulation. ...
-
MAE - Model PT5TLVDT - LVDT Linear Position Transducer
LVDT linear position transducer with spring loaded return head, 5 mm stroke, IP-65 Stroke: 5 mm spring loaded Accuracy: 0.5%FS Resolution: 0.001 mm Lenght: 22 cm Diameter: 3 cm Power supply: 24V Output: 0-5V Mounting plate and aluminum substrates sensor ...
-
MAE - Model ISSM15 - Monoaxial Inclinometer for Structural Monitoring
Monoaxial inclinometer for statical structural monitoring based on servo-inclinometric technology with resolution 0.001°, housed in a case with protection rate IP-68 and equipped with 7 poles female AMPHENOL connector with IP-68 protection rate. Sensor is equipped with aluminum bracket for installation on vertical / horizontal ...
-
Non Destructive Test - Thermal Flow Meters
-
MAE - Model TLOGWLS - Wireless Heat Flux Meter for Transmittance Measurements
TLOGWLS heat flux meter for transmittance measurements is characterized by the maximum accuracy in the data acquisition (24 bit resolution) as well as its great versatility and simple operation. Thanks to the use of four probes (for the measure of the contact temperature) and one heat flux plate connected to the main TLOGWLS unit through proper wireless connection (made up of some completely independent and proper remote units for the acquisition and ...
-
MAE - Model TLW2 - Data Recording Wireless Unit for Heat Flux Meter
Data recording wireless unit for heat flux meter which allows connection without cables of 2 temperature probes (T1, T2) to heat flux meter TLOGWLS. Wireless heat flux meters simplify heat flux measurements on building walls due to lack of wires to be passed inside and outside building to connect two temperature probes to TLOGWLS instrument. TLW2 unit has internal rechargeable battery and transmitts data to TLOGWLS in automatic manner. Through management ...
-
MAE - Model TLW3 - 3 Channels Wireless Unit for Heat Flux Meter
Data recording wireless unit for heat flux meter which allows connection without cables of 2 temperature probes (T1, T2) and a bidirectional heat flux plate (FLUX) to heat flux meter TLOGWLS. Wireless heat flux meters simplify heat flux measurements on building walls due to lack of wires to be passed inside and outside building to connect two temperature probes to TLOGWLS instrument. TLW3 unit has internal rechargeable battery and transmitts data to ...
-
Model HFP01 - Heat Flux Meter Plate
HFP01 serves to measure the heat that flows through the object in which it is incorporated or on which it is mounted. The actual sensor in HFP01 is a thermopile. This thermopile measures the differential temperature across the ceramicsplastic composite body of HFP01. Working completely passive, HFP01 generates a smalloutput voltage proportional to the local heat flux. Using HFP01 is easy. For readout one only needsan accurate voltmeter that works in the ...
-
Non Destructive Test - Endoscopes/Videoinspections
-
Model SDP88D2 - Compact Videoscope
Video endoscope with 2 meters video probe cable lenght. compact videoscope with a small diameter flexible cable probe which can record videos and photos on a removable SD memory. The instrument is also equipped with LED light source and TFT color screen for viewing pictures and videos. Through the integrated display and the function keys you can make the instrument settings easily and ...
-
Model 100-10-0145 - Portable Unit for Surveys on Floors, Walls, Ceilings
The easy-to-use, portable unit can quickly survey floors as well as walls, ceilings and other hard-to-access areas. Conquest provides concrete images on-the-spot in minutes, before cutting or ...
-
MAE - Model C0178/2 - Pre-Embedded Inserts for Pullout Test
Pullout test apparatus, 100 kN cap. for pre-embedded inserts. Insert to incorporate in concrete to perform pullout test consequently to its hardening. Diameter: 30 mm. Packaging: 50 ...