Mannai Technical Services

Mannai Technical Services

112 products found

Products by AMETEK Land

  • Fixed Spot Non-Contact Thermometers / Pyrometers

    Our extensive range of infrared thermometers provides online temperature measurements and control. Innovative, flexible solutions customisable for diverse processes and specialised applications.

  • AMETEK Land - Model SPOT AL EQS - Aluminium Extrusion, Quench and Strip

    AMETEK Land - Model SPOT AL EQS - Aluminium Extrusion, Quench and Strip

    An advanced non-contact infrared pyrometer providing a single sensor solution for aluminium extrusion press exit, quench and strip applications. A highly accurate and stable digital pyrometer, the SPOT AL EQS uses AMETEK Land’s cutting-edge SPOT technology, and unique, advanced data-processing algorithms, to measure aluminium temperature at an extruder press exit , quench or strip mill.

  • AMETEK Land - Model SPOT Actuator - Aluminium Pyrometer

    AMETEK Land - Model SPOT Actuator - Aluminium Pyrometer

    The SPOT Actuator provides remotely controlled target alignment of a SPOT pyrometer for industrial processing applications, specifically for aluminium applications using the SPOT AL EQS (Aluminium Extrusion, Quench and Strip) pyrometer.

  • AMETEK Land - Model System 4 - Landmark Signal Processors

    AMETEK Land - Model System 4 - Landmark Signal Processors

    Landmark Signal Processors are designed to produce the process control variables required from any of the System 4 thermometers to improve quality and efficiency. With this total compatibility, you can choose a processor which provides the features and performance you need to meet the requirements of your application. All thermometers and processors are calibrated individually to guarantee interchangeability and easy ongoing maintenance.

  • AMETEK Land - Model UNO - Stand Alone Radiation Thermometer

    AMETEK Land - Model UNO - Stand Alone Radiation Thermometer

    A rugged, low-cost, standalone temperature sensor range optimised for OEMs, plant designers and process operators. A non-contact infrared thermometer range designed for standalone use, Simply power it up and UNO provides a 4-20mA output linear over its temperature range. UNO delivers precise, drift-free measurements for even the smallest target areas.

  • AMETEK Land - Model SOLOnet - Compact Digital Infrared Thermometers

    AMETEK Land - Model SOLOnet - Compact Digital Infrared Thermometers

    Flexible, web browser-enabled digital infrared thermometers customisable to a wide range of process control applications in manufacturing and industry. Compact digital infrared thermometers designed for web browser control, the cutting-edge SOLOnet series offer users versatility and value in a wide range of temperature monitoring applications.

  • AMETEK Land - Model SPRINT 8 - Digital Thermometer

    AMETEK Land - Model SPRINT 8 - Digital Thermometer

    A compact, rugged non-contact thermometer designed for lower temperature industrial processes (Available in the Americas only). Designed for the control and process monitoring of lower temperature applications, Sprint 8 integrates AMETEK Land’s reliable measurement into a tough package designed for harsh environments. Machined from durable stainless steel to operate in challenging environments, Sprint 8 outputs a stable measurement via a linear...

  • AMETEK Land - Model RT8A - Non-Contact Infrared Thermometer

    AMETEK Land - Model RT8A - Non-Contact Infrared Thermometer

    RT8A is a non-contact infrared thermometer for use in many low temperature applications. It helps asphalt paving or roadstone producers meet state, national and environmental quality compliance requirements and glass manufacturers meet quality compliance requirements in multiple standalone applications. Required to help manufacturers meet the increasing demands for tighter quality control and comply with...

  • AMETEK Land - Model ABT - Aluminium Billet Temperature Monitoring

    AMETEK Land - Model ABT - Aluminium Billet Temperature Monitoring

    Fast, accurate, non-contact thermometer designed specifically to measure the temperature profile of aluminium billets as they exit the heating furnace, regardless of the billet emissivity or surface condition. ABT is a dedicated Aluminium Billet Thermometer that gives a highly accurate custom measurement for aluminium billet surfaces, providing an accurate temperature profile of the billet as it passes by. A major advance in monitoring billet...

  • AMETEK Land - Model ADT - Aluminium Die Monitoring

    AMETEK Land - Model ADT - Aluminium Die Monitoring

    High accuracy, fast-response thermometer optimised for the measurement of the die prior to loading into the press in aluminium extrusion processes. The ADT , based on the full featured SPOT M160 Fibre optic pyrometer is an Aluminium Die Thermometer designed specifically for measuring pre-heated dies as they are moved from the die oven to installation in the aluminium extrusion press.

  • AMETEK Land - Model CDA - Incinerator for Measuring Gas Temperature

    AMETEK Land - Model CDA - Incinerator for Measuring Gas Temperature

    Advanced non-contact infrared thermometer designed for measuring the gas temperature within waste incinerators. The CDA thermometer is optimised to accurately measure the gas temperature in waste incinerators using AMETEK Land’s unique non-contact infrared technology. CDA ‘sees’ through a cold ambient air to measure the hot carbon dioxide beyond. By filtering out other gas types, CDA provides a true gas temperature for exceptional...

  • AMETEK Land - Model DTT - Drawing Tower Furnaces

    AMETEK Land - Model DTT - Drawing Tower Furnaces

    A short-wavelength infrared thermometer providing precise and stable temperature measurement for control of optical fibre drawing tower furnaces. A highly accurate temperature measurement of optical fibre drawing tower furnaces, DTT is a Drawing Tower Thermometer that enables production of high quality, low loss optical fibre to the required strength and attenuation. As AMETEK Land’s market-leading infrared technology avoids the practical issues...

  • AMETEK Land - Model FG - Glass Forehearth

    AMETEK Land - Model FG - Glass Forehearth

    A simple fibre-optic, two-wire, loop powered thermometer with 4 to 20mA output. Specifically designed to improve process control in the glass industry. Offering accurate, high resolution and reliable temperature measurements up to 1650°C (3000°F), the FG thermometer enables precise control of process temperatures in the glass industry. A simple, cost-effective alternative to tri level thermocouples for some zones measuring bulk glass...

  • AMETEK Land - Model FLT5A - Float Line Thermometer

    AMETEK Land - Model FLT5A - Float Line Thermometer

    Accurate and flexible infrared thermometer measurements for measuring glass surface temperature in the tin bath and annealing lehr on float lines.The FLT5A is a standalone thermometer offering precision measurement of the surface temperature of glass float lines, ensuring consistently high product quality throughout the process. Offering excellent precision and long-term stability, the FLT5A’s extensive measurement range removes the need to use...

  • AMETEK Land - Model FTS - Furnace Thermometer System

    AMETEK Land - Model FTS - Furnace Thermometer System

    A two-sensor temperature monitoring system designed to continuously measure true load temperatures in reheat furnace applications especially in the challenging heating sections. Using AMETEK Land’s leading-edge infrared sensing to measure both furnace load and background temperature, the Furnace Thermometer System (FTS) links to the advanced Landmark Graphic signal processor for a true temperature of the reheat furnace load unaffected by...

  • AMETEK Land - Model GST - Galvanneal Strip Thermometer

    AMETEK Land - Model GST - Galvanneal Strip Thermometer

    AMETEK Land formally announce that from the 26th November 2018 the System 4 Galvanneal Strip Thermometer (GST) will be discontinued from new product sales. Whilst the product has been stopped for new product sales the system is fully supported by our qualified field and factory service teams and our internal technical support engineers. A selected range of GST spares will remain available from AMETEK Land and will continue to be supplied as standard...

  • AMETEK Land - Model SP - Spray Chamber

    AMETEK Land - Model SP - Spray Chamber

    Fibre optic infrared thermometer system, custom-designed for temperature measurements in the hostile environment of the continuous caster spray chamber. A drift-free thermometer designed to overcome the adverse environment of a continuous caster spray chamber, SCP utilises AMETEK Land’s accurate short wavelength processing to ensure a reliable measurement – even in the hottest and harshest conditions. Requiring no...

  • AMETEK Land - Model VDT - Vapour Deposition Thermometer

    AMETEK Land - Model VDT - Vapour Deposition Thermometer

    Non-contact infrared thermometer custom-designed for accurate preform temperature measurements in optical fibre manufacture. Optimised for precise preform temperature control in vapour deposition processes, AMETEK Land’s Vapour Deposition Thermometer delivers a critical measurement for production of low-loss, high-bandwidth optical fibre. VDT enables exact sighting onto the rotating preform for an accurate surface temperature...

  • Fixed Thermal Imagers & Line Scanners

    Providing high-resolution thermal information, our imagers and linescanners set the industry standard for performance. Backed by advanced software support, they supply the information you need to keep your process running safely and efficiently.

  • AMETEK Land - Model LSP-HD - Infrared Linescanner for Thermal Process Imaging

    AMETEK Land - Model LSP-HD - Infrared Linescanner for Thermal Process Imaging

    Compact and sophisticated high accuracy infrared linescanner, designed to produce advanced thermal images of moving processes. A compact infrared linescanner easily integrated using a standard Ethernet connection, the LSP-HD series offers highly accurate temperature measurements in a range of application-specific models. Offering industry-leading scanning performance of 1000 data points even at scan speeds as high as 150 scans per second, LSP-HD sets...

  • AMETEK Land - Model FTI-Eb - Furnace Monitoring System

    AMETEK Land - Model FTI-Eb - Furnace Monitoring System

    A precise, fixed thermal imager with borescope and wide field-of-views for maximum monitoring coverage requiring only a small diameter access hole through the furnace wall. Various lens and borescope lengths allow for installation and application flexibility. FTI-EB is a high-accuracy, fixed thermal imaging camera, optimised for use in refractory-lined furnaces or boilers, and supported by an extensive range of dedicated accessories for resilient...

  • AMETEK Land - Model FTI-E Imager - Fixed Thermal Imaging System

    AMETEK Land - Model FTI-E Imager - Fixed Thermal Imaging System

    A high-resolution, accurate, fast, radiometric thermal imager designed to capture detailed temperature information in harsh industrial environments. Part of AMETEK Land’s advanced intelligent imaging solution, The FTI-E family of imagers provide high-resolution, radiometric thermal images for a wide range of industrial applications in hostile conditions. Easy to install and use, its accurate temperature measurements provide the complete thermal...

  • AMETEK Land - Model HotSpotIR - Conveyor Belts

    AMETEK Land - Model HotSpotIR - Conveyor Belts

    An extremely compact, fast-response infrared scanning system designed to detect emerging hot spots on conveyor belt materials. Designed for industrial environments, the fixed-focus HotSpotIR high-speed scanning system detects small hot inclusions on a moving conveyor before they can cause a fire. Reliable alarm processing is achieved without software or computer requirements.

  • AMETEK Land - Model SDS-E - Slag Detection System

    AMETEK Land - Model SDS-E - Slag Detection System

    The Slag Detection System (SDS) is the proven solution for accurate and timely detection of slag carryover in the steelmaking process, allowing plants to improve product quality, reduce slag carryover and improve operator safety. With over 60 years of application expertise in the steel industry AMETEK Land’s Slag Detection System (SDS) accurately and rapidly detects the onset of slag carry-over. This fast response significantly reduces slag...

  • AMETEK Land - Model NIR-B 3XR - HPI - Reformer & Cracker Tube Furnace Thermal Imaging System

    AMETEK Land - Model NIR-B 3XR - HPI - Reformer & Cracker Tube Furnace Thermal Imaging System

    An infrared thermal imaging solution offering continuous, short-wavelength, 24/7 temperature monitoring for steam reformer and Ethylene cracker tube furnaces. NIR Borescope (NIR-B) 3XR is a radiometric infrared imaging camera optimised for continuous temperature measurements in steam reformer and cracker tube furnaces. Using the proven technology of AMETEK Land’s advanced NIR thermal imager, NIR-B 3XR offers highly accurate measurements of high...

  • AMETEK Land - Model NIR-B Glass - Melt Tank - Borescope Thermal Imaging Camera

    AMETEK Land - Model NIR-B Glass - Melt Tank - Borescope Thermal Imaging Camera

    A borescope thermal imaging camera, specifically developed to return precise temperature measurements in glass furnace applications. An application-specific version of AMETEK Land’s cutting-edge NIR-B thermal imaging camera, Near Infrared Borescope (NIR-B) Glass creates detailed, live radiometric images that accurately measure temperatures inside of a glass melt furnace.

  • AMETEK Land - Model ASPS - Aluminium Strip Coiling

    AMETEK Land - Model ASPS - Aluminium Strip Coiling

    An application-specific version of the proven ARC thermal imaging system, designed for temperature monitoring of aluminium strip coiling. Developed specifically for accurate, edge-to edge temperature measurement of aluminium strip at the coiler. ASPS uses a Patented technique of advanced radiometric thermal imaging to produce highly accurate temperature measurements at the coiler location.

  • AMETEK Land - Model LSP HD-50/LSP HD-52 - Glass Tempering Furnace System

    AMETEK Land - Model LSP HD-50/LSP HD-52 - Glass Tempering Furnace System

    An integrated solution for high-accuracy temperature measurements in glass toughening plants - independent of surface coatings applied to the glass. Glass Tempering Furnace System meets the challenge of accurately measuring glass temperatures for plants running multiple glass types – even using a variety of coatings, including low-emissivity surfaces. Easy to install and use, AMETEK Land’s high-precision technology...

  • Portable Non-Contact Thermometers

    Our high-quality Cyclops L handheld thermometers provide spot temperature measurements, with unmatched accuracy and reliability. Trigger-operated for easy use, with precise target viewing and on-board data storage.

  • Calibration Sources

    A comprehensive range of blackbody calibration sources enables high-precision calibration of radiation thermometers under on-site and laboratory conditions. Designed to work seamlessly with our instruments, primary and reference sources available.

  • AMETEK Landcal - Model P1600B2 - High Temperature Bench-Mounted

    AMETEK Landcal - Model P1600B2 - High Temperature Bench-Mounted

    Bench-mounted, primary standard, var. temp. source. LANDCAL P1600B2 is a new improved bench mounted, primary standard, variable temperature source designed for testing and precise calibration of most high temperature industrial radiation thermometers, thermographic equipment and thermocouples.

  • Combustion Efficiency Monitors

    Close monitoring of oxygen, carbon monoxide and sulphuric acid dewpoint can help improve combustion efficiency, lower energy use, reduce emissions and prevent plant corrosion. We offer precision measurements for these applications.

  • AMETEK Land Genesis - Model WDG 1200 & 1210 - Flue Gas Oxygen Analyzers

    AMETEK Land Genesis - Model WDG 1200 & 1210 - Flue Gas Oxygen Analyzers

    A highly flexible range of high-precision flue gas oxygen analysers developed specifically for combustion analysis and control applications. Using AMETEK’s industry-proven zirconium oxide sensor technology, the WDG-1200/1210 range provides the world’s first fully-integrated, standalone flue gas oxygen analysers. The user interface is mounted onto the probe, lowering installation costs.

  • AMETEK Land - Model Lancom 200 - Portable Acid Dewpoint Temperature Monitoring

    AMETEK Land - Model Lancom 200 - Portable Acid Dewpoint Temperature Monitoring

    A portable monitoring device using conductive cell technology for accurate, periodic measurements of the Acid Dewpoint Temperature (ADT) in combustion processes. Designed specifically to provide the unique but vital measurement of sulphuric acid dewpoint temperature, the portable Lancom 200 supports boiler efficiency checks, corrosion protection and the management of high-cost fuel additives.

  • AMETEK Land - Model 9100 - Cross-Stack, Infrared Carbon Monoxide (CO) Monitor

    AMETEK Land - Model 9100 - Cross-Stack, Infrared Carbon Monoxide (CO) Monitor

    A highly accurate, cross-stack, infrared carbon monoxide (CO) monitor suitable for use in a wide range of industrial combustion efficiency applications. Developed based on AMETEK Land’s decades of experience in carbon monoxide monitoring solutions, the Model 9100 provides the direct, continuous, cross-stack CO measurement and fast-response coverage essential to efficient combustion control in boilers.

  • Portable Gas Analysers

    The Lancom 4 range lets you take AMETEK Land’s cutting-edge, easy-to-use gas analysis on the move. With up to nine gas measurements on a single analyser, there are solutions for combustion monitoring and environmental compliance.

  • AMETEK Land - Model Lancom 4 - Compact Portable Multi-Gas Analyser System

    AMETEK Land - Model Lancom 4 - Compact Portable Multi-Gas Analyser System

    Compact portable multigas analyser, capable of measuring up to eight flue gases in a range of combustion and emissions processes. Lancom 4 delivers the complete solution for portable flue gas analysis, integrated into a compact battery-powered unit able to measure up to eight gases simultaneously with nine separate sensors. Simple to set-up and easy to operate, Lancom 4 enables highly accurate spot and semi-continuous gas testing adaptable to a wide...

  • Opacity and Dust Monitors

    The most advanced range of opacity, dust and particulates monitors available, use patented technology to deliver highly accurate results. With no moving parts, they combine high reliability with low maintenance.

  • AMETEK Land - Model 4500 MkIII - Compliance Opacity and Dust Monitor

    AMETEK Land - Model 4500 MkIII - Compliance Opacity and Dust Monitor

    A high-specification opacity and dust monitor meeting global compliance standards for monitoring combustion processes. 4500 MkIII is the most accurate and reliable continuous opacity monitor available, combining AMETEK Land’s ground-breaking innovation and simple design for precise, problem-free operation. Unmatched, class-leading accuracy ensures compliance limits for dust emissions and stack opacity are met with confidence. This avoids the...

  • AMETEK Land - Model 4650-PM - Compliance Particulate Matter Monitor

    AMETEK Land - Model 4650-PM - Compliance Particulate Matter Monitor

    High-sensitivity, forward-scatter laser measurement for particulate matter, for use in combustion processes where condensed water is not present (for sale in the USA and China only). 4650-PM provides the stable, accurate low-range measurement of particulate matter in stacks and ducts where water droplets are not present in the flue gas. NOTE: The 4650-PM is currently available only in the USA and China.

  • AMETEK Land - Model 4200+ - Non-Compliance Opacity and Dust Monitor

    AMETEK Land - Model 4200+ - Non-Compliance Opacity and Dust Monitor

    Dust and opacity monitor, designed for measuring dust emission concentrations in combustion applications where automatic calibration checks are not required. The 4200+ is the most accurate and reliable monitor available for dust and opacity measurements in combustion applications not requiring automatic calibration checks and regulatory compliance. Optimised for multi-process plants using common exhaust stack sizes, 4200+ delivers you immediate...

  • AMETEK Land - Model 4200 - Non-Compliance Dust Emissions Monitor

    AMETEK Land - Model 4200 - Non-Compliance Dust Emissions Monitor

    Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of dust, smoke and particulates in a wide range of industrial applications. NOTE: The 4200 is currently available only in Asia.

  • Carbon Monoxide Detectors

    Providing early warning of combustion in process and storage areas, our highly sensitive CO detectors monitor the entire process. This gives the best chance of early detection, allowing rapid action to prevent fire.

  • AMETEK Land Millwatch - Advanced Carbon Monoxide Detector

    AMETEK Land Millwatch - Advanced Carbon Monoxide Detector

    An advanced carbon monoxide detector designed to provide early warning of spontaneous combustion in pulverisers for coal and biomass. Specifically designed for early detection of potential fire risk in pulverizing mills in coal or biomass processes, Millwatch monitors and quickly responds to sudden carbon monoxide (CO) build-up, allowing preventative action to be taken before a hazardous condition develops.

  • Industry Application Specific

    We design systems specifically to solve critical temperature measurement problems in particular industrial  applications. These specialised solutions provide optimised performance in challenging processes.

  • AMETEK Land - Unique Reference Pyromete - Gold Cup

    AMETEK Land - Unique Reference Pyromete - Gold Cup

    AMETEK Land’s unique reference pyrometer designed specifically for temperature measurements on the surface of reformer tubes. As the only instrument that can provide a repeatable, reliable temperature for reformer tubes, Gold Cup eliminates inherent errors that affect other infrared devices. This makes it ideal for checking and correcting other measurement devices.

  • AMETEK Land - Model JRG/A - Plate and Float Glass

    AMETEK Land - Model JRG/A - Plate and Float Glass

    Application specific design, compact  fast-response thermometer designed for temperature measurements on plate and float glass applications. A unique miniature radiation thermometer measuring just 28mm x 4mm, JRG/A is specifically designed to monitor temperature consistency in plate and float glass applications.

  • AMETEK Land - Model SD - Blast Furnace Stove Dome

    AMETEK Land - Model SD - Blast Furnace Stove Dome

    A short wavelength infrared thermometer system specifically designed for high-precision, and rapid non-contact temperature measurements of the refractories inside blast furnace stoves. The application-specific Stove Dome (SD) system uses AMETEK Land’s advanced infrared radiation thermometer technology to monitor refractory temperatures around the stove dome or hot blast main.

  • AMETEK Land - Model Understrip - Fibre-Optic Temperature Measurement System

    AMETEK Land - Model Understrip - Fibre-Optic Temperature Measurement System

    A fibre-optic temperature measurement system designed to provide continuous, accurate monitoring of the scale-free metal surface under the steel mill roller table. AMETEK Land’s application-specific solution for temperature measurements in the hot rolling of flat steel products, the Understrip is a rugged, accurate system designed to take measurements from the underside of the steel. This avoids any effects from surface water or minor scale that...

Products by AMETEK Process Instruments

  • Electrolytic

  • AMETEK PI - Model 303B - Moisture Analyzer

    AMETEK PI - Model 303B - Moisture Analyzer

    The 303B moisture analyzer is a highly accurate, portable device for trace-level measurements of moisture in gas streams for Division 2 areas. Offering a lightweight design and digital moisture reading, the 303B uses an electrolytic cell that does not require calibration, and is virtually specific to water, so can be used to monitor the moisture content in nearly any background gas.

  • Gas Chromatographs

    Gas chromatographs provide trace-level analysis and monitoring of impurities in a range of ultra-high-purity gas applications, including bulk gases, environmental and research laboratory applications. Our range of trace gas monitors combines the gas separation technique of gas chromatography with the sensitive detection of reduction gas detectors and flame ionization detectors for highly accurate, low-level analysis.

  • AMETEK PI - Model ta3000 - Gas Analyzers

    AMETEK PI - Model ta3000 - Gas Analyzers

    Available in two models, the ta3000 gas analyzer is an isothermal gas chromatograph that can be configured with a reduction gas detector or flame ionization detector. The analyzer offers extreme measurement sensitivity from parts-per-million (ppm) down to low parts-per-billion (ppb) levels, and negligible matrix effects from permanent gases. Combined with the separating power of gas chromatography, it provides a unique system.

  • AMETEK PI - Model ta5000 - Gas Analyzers

    AMETEK PI - Model ta5000 - Gas Analyzers

    The ta5000 series of isothermal gas chromatographs is available in two models, offering either a reduction gas detector or flame ionization detector. Measuring at a low detection limit, these analyzers provide extremely sensitive measurements from parts-per-million (ppm) to low parts-per-billion (ppb) levels, and negligible matrix effects from permanent gases.

  • AMETEK PI - Model ta7000 - Gas Purity Monitors

    AMETEK PI - Model ta7000 - Gas Purity Monitors

    Designed for modern ultra-high-purity (UHP) gas applications, the ta7000 series measures impurities at extremely low, parts-per-trillion (ppt) levels, using either a reduction gas detector or flame ionization detector. Employing an advanced algorithm that isolates measurement signals while filtering out random electronic noise, the analyzer delivers unparalleled sensitivity. This results in an accurate, precise profile of bulk gas quality.

  • AMETEK PI - Model MGB1000 - Micro Gas Blender

    AMETEK PI - Model MGB1000 - Micro Gas Blender

    The MGB1000 is a micro gas blender ideal for calibrating gas analyzers, such as AMETEK Process Instruments’ ta3000 and ta5000 series, with parts-per-million (ppm) or parts-per-billion mixes of a single or mixed-component gas standard. It generates consistent and reliable fixed-point gas concentrations at blend ratios up to 4545:1. The micro volume flow path enables single-step blends quickly and reliably, without consuming large quantities of...

  • AMETEK PI - Model Sigma 4000 - Multipoint Stream Selector

    AMETEK PI - Model Sigma 4000 - Multipoint Stream Selector

    The Sigma4000 multipoint stream selector multiplexes several sampling points to two ta3000 or ta5000 process gas analyzers, ensuring an ultra-high-purity gas supply without dedicating an instrument to each gas stream. By reducing the need for individual analyzers at each sample point, the Sigma4000 can significantly decrease the cost of ultra-high-purity (UHP) gas monitoring.

  • Chilled Mirror Dew Point Analyzers

    Chilled-mirror devices measure moisture (water) and/or hydrocarbon dew point temperatures directly, by accurately recording the temperature at which moisture or hydrocarbon condenses on a temperature-controlled surface in contact with the process gas. Chilled-mirror analyzers can be automated, online instruments or operated manually. Sample gas continuously flows across a temperature-controlled surface, recording dew point upon detection of condensate, either water or hydrocarbon, on t

  • AMETEK PI - Model Chanscope II - Dew Point Tester

    AMETEK PI - Model Chanscope II - Dew Point Tester

    The Chanscope II is a rugged, portable instrument for measurements of the moisture (water) or hydrocarbon dew point temperature of any gas, and is frequently used to verify electronic hydrocarbon and water dew point analyzers. A user-friendly dew point tester that is easy to maintain and operate, it displays the temperature above the illuminated mirror, making it simpler for the operator to determine results.

  • AMETEK PI - Model Standard Bureau of Mines - Dew Point Tester

    AMETEK PI - Model Standard Bureau of Mines - Dew Point Tester

    The Standard Bureau of Mines Dew Point Tester uses chilled-mirror technology to accurately and reliably measure the moisture (water) or hydrocarbon dew point temperature of any gas and does not require calibration. Designed specifically to determine the dew point temperature of natural gas within a pipeline, the device meets the ASTM D1142 industry standard and can accurately detect the dew point temperature of both moisture (water) and hydrocarbon.

  • Gas Gravitometers

    Gas gravitometers provide a simple, reliable method of measuring the specific gravity of a gas or analysis of the composition of the process gas when specific gravity can be correlated to composition. For many processes and applications, gas composition can be easily inferred through a simple analysis of the gas mixture’s specific gravity with a gravitometer, as opposed to a complex spectral analysis using a gas chromatograph.

  • AMETEK PI - Model Ranarex - Portable Gas Gravitometer

    AMETEK PI - Model Ranarex - Portable Gas Gravitometer

    The Ranarex is a fast-response, simple-to-operate portable gas gravitometer used to determine the specific gravity of a process gas in comparison to air. Using a proven, trusted measurement technique in operation for more than 90 years, the gravitometer offers multiple scales and field-proven accuracy within 0.05% of actual value over a specific gravity range of 0.52 to 1.90.

  • Mass Spectrometers

    Mass spectrometers are versatile, sensitive instruments that provide accurate gas analysis by ionizing gas atoms and separating them out into a spectrum, allowing identification of the gas components. AMETEK Process Instruments’ range of process mass spectrometers uses quadrupole mass filters and residual gas analysis to provide solutions for high-purity analysis in a wide range of industrial applications.

  • StreamPro - Process Mass Spectrometer

    StreamPro - Process Mass Spectrometer

    Streamlined online gas analysis. The StreamPro process mass spectrometer offers real-time gas analysis in a reliable easy-to-use, compact package for a wide range of industrial applications.

  • Dycor - Model ProLine - Process Mass Spectrometers

    Dycor - Model ProLine - Process Mass Spectrometers

    Designed for multiport, multicomponent process analysis, the ProLine is a versatile mass spectrometer which uses our proven quadropole mass filter, in combination with a contaminant-resistant enclosed ion source. It delivers outstanding sensitivity and stability with unequalled, remarkably clean mass separation, in an affordable package, offering real-time analysis at the lowest available price-per-sample point.

  • FlarePro - Process Mass Spectrometer

    FlarePro - Process Mass Spectrometer

    The FlarePro is a quadrupole process mass spectrometer providing fast, accurate component and BTU content measurements, even when confronted with widely changing flare gas streams. Field testing has shown that the FlarePro offers more detailed and relevant data faster than gas chromatography, and provides BTU numbers equivalent to those provided by a calorimeter, but with greater specificity.

  • Dycor - Benchtop Gas Analyzer

    Dycor - Benchtop Gas Analyzer

    The Benchtop mass spectrometer is a versatile gas analysis system designed to sample gases over a wide range of pressures, from high vacuum up to and beyond atmospheric pressure. A compact system with a range of options, the Benchtop can be designed to suit specific applications. The analyzer and inlet system can be removed from the frame and located remotely from the pumping station.

  • DyMaxion - Enclosed Ion Source Gas Analyzer

    DyMaxion - Enclosed Ion Source Gas Analyzer

    Using the latest quadrupole technology to provide unsurpassed gas analysis monitoring, characterization, and control, the Dymaxion Enclosed Ion Source gas analyzer delivers accuracy and reliability with high-pressure samples. The ionizer design supports higher sensitivity and lower background noise, and allows operation with sample pressures as high as 10-3[KLG1]  Torr, with no need for further pressure reduction.

  • DyMaxion - Model RGA - Smart Sensor Residual Gas Analyzer

    DyMaxion - Model RGA - Smart Sensor Residual Gas Analyzer

    The Dymaxion RGA mass spectrometer uses the latest quadrupole technology to provide unsurpassed gas analysis monitoring, characterization or control for a range of applications. Analyzer heads and electronics can be interchanged, providing maximum versatility. Options for ion source (open, closed and enclosed) are available, along with a choice of AMU range (1-100, 1-200 and 1-300).

  • Dycor - Model LC-D Series - Residual Gas Analyzer

    Dycor - Model LC-D Series - Residual Gas Analyzer

    Measuring molecular weights up to 300 AMU, the LC-D Series instruments are constructed from materials that are compatible with ultra-high vacuum (UHV) systems. They are designed to require minimal maintenance. A highly versatile residual gas analyzer (RGA), the LC-D Series offers a variety of operating modes, including analog and bar, meter, annunciator, tabular, trent, and leak detection. Auto-tune capabilities ensure high quality, repeatable data.

  • WellPro - Mass Spectrometer

    WellPro - Mass Spectrometer

    The WellPro process mass spectrometer provides quantitative analysis of C1 through C7 components in less than 10 seconds. Analysis accuracy is maintained using a small gas cylinder to verify the instrument performance. Recalibration, if required, is completely automatic.

  • ProMaxion - Process Mass Spectrometer

    ProMaxion - Process Mass Spectrometer

    The ProMaxion process mass spectrometer delivers cost-effective, high-performance online gas analysis for weatherproof or hazardous area locations. Using dependable, field-proven mass spectrometry analysis and modular design, the ProMaxion has low maintenance requirements and a low cost of ownership. Affordable spares allow rapid field repairs to be made.

  • Quartz Crystal Microbalance

  • AMETEK PI - Model 3050 Series - Moisture Analyzer

    AMETEK PI - Model 3050 Series - Moisture Analyzer

    The 3050 series of moisture analyzers utilizes AMETEK’s proven, accurate quartz crystal microbalance (QCM) technology. Built-in verification provides operators with increased measurement confidence. The industry standard for trace moisture applications, QCM technology delivers the most accurate measurements available, and responds quickly to increasing and decreasing moisture levels. The 3050 optimizes this technology for a range of...

  • AMETEK PI - Model 2850 - Moisture Analyzer

    AMETEK PI - Model 2850 - Moisture Analyzer

    Establishing a new standard for clean gas moisture analyzers, the 2850 provides exceptional performance, with virtually no interferences, multi-gas compatibility, and on-board measurement verification. The 2850 uses the most accurate trace moisture measurement technology available to deliver an ultrafast response to both increasing and decreasing moisture levels.

  • AMETEK PI - Model 5800 - Moisture Analyzer

    AMETEK PI - Model 5800 - Moisture Analyzer

    Ideal for critical moisture applications, the 5800 offers exceptional precision, multi-gas compatibility, fast response speed and a wide measurement range. Using the most accurate trace moisture technology available, it responds rapidly to both increasing and decreasing moisture levels, and is specific to moisture in most applications.

  • AMETEK PI - Model 5812 - Moisture Analyzer

    AMETEK PI - Model 5812 - Moisture Analyzer

    The 5812 moisture analyzer is designed specifically to meet the needs of the natural gas industry for reliable, low-maintenance, self-verifying moisture analysis, with a rapid response to moisture changes. A combination of quartz crystal sensing and asymmetrical sampling provides the rugged, reliable and continuous performance demanded by natural gas moisture analysis, and ensures a long sensor lifespan.

  • AMETEK PI - Model 5830 - Moisture Analyzer

    AMETEK PI - Model 5830 - Moisture Analyzer

    Built upon the success of AMETEK Process Instruments’ proven quartz crystal microbalance technology, the 5830 is ideal for critical moisture measurement applications, and is designed to be user-friendly. It combines exceptional accuracy, multi-gas compatibility, a fast response speed and wide measurement range. A menu-driven gas selection system eliminates the need for all manual adjustments.

  • AMETEK PI - Model 5910 UHP - Moisture Analyzer

    AMETEK PI - Model 5910 UHP - Moisture Analyzer

    Using quartz crystal technology for speed, accuracy and calibration stability, the 5910 moisture analyzer is designed for ultra-high-purity (UHP) gas analysis in continuous monitoring and analytical cart applications. Delivering exceptional baseline stability and sensitivity to sub-parts-per-billion-by volume (ppbv) changes in moisture concentration, it provides one of the fastest response speeds available.

  • AMETEK PI - Model 5920 UHP - Moisture Analyzer

    AMETEK PI - Model 5920 UHP - Moisture Analyzer

    Using quartz crystal technology for speed, accuracy and calibration stability, the 5910 moisture analyzer is designed for ultra-high-purity (UHP) gas analysis in continuous monitoring and analytical cart applications. Delivering exceptional baseline stability and sensitivity to sub-parts-per-billion-by volume (ppbv) changes in moisture concentration, it provides one of the fastest response speeds available.

  • AMETEK PI - Model 5000 - Process Moisture Analyzer

    AMETEK PI - Model 5000 - Process Moisture Analyzer

    The versatile 5000 is a highly sensitive moisture analyzer for a wide range of process applications where the continuous, reliable measurement of moisture in vapors and gases is required. It provides a fast, reliable measurement with few interferences and no requirement for process temperature or pressure compensation. The unique differential measurement principle, combined with continuous diagnostics, ensures reliable performance in critical moisture...

  • Tunable Diode Laser

    Tunable diode laser absorption spectroscopy (TDLAS) is a fast, accurate, non-contact gas analysis technique that responds quickly to changing analyte concentrations. It is a proven technology free of interferences from other sample stream components. Highly specific to the monitored analyte, TDLAS measurements are extremely reliable, and require minimal maintenance. They provide accurate solutions in a variety of configurations to meet specific application requirements.

  • AMETEK PI - Model 5100 TDLAS - Gas Analyzer for Single Analytes

    AMETEK PI - Model 5100 TDLAS - Gas Analyzer for Single Analytes

    The feature-rich 5100 TDLAS offers high-sensitivity, analyte-specific, fast-response measurements for critical industrial applications. It features a single absorption cell and integrated sample system in a compact, cost-effective package. The 5100 uses a reference cell to line-lock the laser on a desired wavelength. Any minor shift in the observed spectrum is used as feedback to adjust the laser, ensuring the proper operating wavelength. Thus, there...

  • AMETEK PI - Model 5100HD TDLAS - Based on Tunable Diode Laser Absorption Spectroscopy

    AMETEK PI - Model 5100HD TDLAS - Based on Tunable Diode Laser Absorption Spectroscopy

    Using tunable diode laser absorption spectroscopy (TDLAS) technology, the 5100HD can be configured with one or two absorption cells, providing dual stream analysis and/or the measurement of multiple analytes at the same time. The tunable diode laser technique is inherently free from many problems that affect physical contact sensors, including repeated exposure to contaminants and a delayed measurement response to sudden process upsets.

  • AMETEK - Model 5100P - TDLAS Transportable Analyzer

    AMETEK - Model 5100P - TDLAS Transportable Analyzer

    Using tunable diode laser absorption spectroscopy, the 5100P is a transportable, easy-to-use analyzer optimized to measure either water vapor (H2O) or carbon dioxide (CO2) in select gas streams. It offers the fast-response, high-accuracy benefits of TDLAS technology in a lightweight, durable and mobile platform that is certified for use in hazardous areas including Class I, Division 2, and both ATEX and IECEx Zone 2.

  • UV Vis

  • AMETEK PI - Model IPS-4 - Integrated Photometric Spectrometer

    AMETEK PI - Model IPS-4 - Integrated Photometric Spectrometer

    AMETEK Process Instruments Model IPS-4 is a huge step forward in capability and reliability for process spectrophotometers. The IPS-4 is capable of measuring up to eight wavelengths in a gas or liquid phase sample. Sample handling and conditioning systems are available as an option that is integrated into the IPS-4's sample cell enclosure.

  • AMETEK PI - Model WR-888 - Sulfur Recovery Unit (SRU) Analyzers

    AMETEK PI - Model WR-888 - Sulfur Recovery Unit (SRU) Analyzers

    AMETEK Process Instruments has been the leader in tail gas analysis for over 40 years-with more than 1,100 installed 880 NSL analyzers and more than 100 million hours of run time. The 888, the successor of the 880 NSL uses field-proven and highly reliable UV technology to accurately monitor the H2S and SO2 concentrations in sulfur recovery tail gas. This compact, rugged analyzer mounts directly on the process pipe, eliminating...

  • AMETEK PI - Model 910 - Hot/Wet Multi-Gas Mass Flow CEM

    AMETEK PI - Model 910 - Hot/Wet Multi-Gas Mass Flow CEM

    The 910 is specifically configured for monitoring the stack emissions of multiple pollutants on a mass rate basis. It measures stack effluent temperature and velocity in addition to as many as five pollutant concentrations at stack conditions, enabling each pollutant's mass emission rate to be reported. With the addition of an optional zirconium oxide sensor, the 910 is capable of monitoring oxygen.

  • AMETEK PI - Model 914 - Continuous Emission Monitoring System

    AMETEK PI - Model 914 - Continuous Emission Monitoring System

    The  914 is a built-to-order Continuous Emission Monitor (CEM) that includes all the components needed for a compliance monitoring and reporting project. The system uses dry extractive sampling techniques designed to meet government regulations for all types of compliance monitoring.

  • AMETEK PI - Model 919 - Hot/Wet Single Gas Analyzer

    AMETEK PI - Model 919 - Hot/Wet Single Gas Analyzer

    The 919 is specifically configured for monitoring stack emissions on a concentration basis. With the addition of an optional zirconium oxide sensor, the 919 is capable of monitoring oxygen. Robust and reliable analyzer, the 919 has no-moving-parts, UV-based measurements do not suffer from H2O and CO2 interference. This greatly simplifies sample handling and sample integrity as there is no need for sample drying. As a fully...

  • AMETEK PI - Model 920 - Hot/Wet Multi-Gas CEM

    AMETEK PI - Model 920 - Hot/Wet Multi-Gas CEM

    The 920 is specifically configured for monitoring the stack emissions of multiple pollutants on a concentration basis. It measures as many as five pollutants at stack conditions. With the addition of an optional zirconium oxide sensor, the 920 is capable of monitoring oxygen.

  • AMETEK PI - Model 930 - H2S in Sulfur Pit Analyzer

    AMETEK PI - Model 930 - H2S in Sulfur Pit Analyzer

    In many sulfur recovery units, produced sulfur is stored in liquid form in sulfur pits. Operators are increasingly aware that sulfur pits present potential danger to plant personnel and overall plant safety. It is therefore critically important to monitor H2S in the vapour space of sulfur pits to ensure that it remains below the Lower Explosive Limit (LEL) (4.3% by volume). Additionally, the presence of rising concentrations of SO2 in the sulfur pit...

  • AMETEK PI - Model 931 - Single Gas H2S Analyzer (opt. + H2 and HC)

    AMETEK PI - Model 931 - Single Gas H2S Analyzer (opt. + H2 and HC)

    The 931 uses a sophisticated UV-VIS photometer to measure any single UV-absorbing gas species for process monitoring and control. Additional IR and thermal conductivity sensors capable of detecting non-UV absorbing species, such as CO2 and H2 can be incorporated into the design. The 931 is provided as an explosion-proof package making it suitable for most chemical and petrochemical applications.

  • AMETEK PI - Model 932 - Multi-Gas H2S Analyzer (opt. + H2 and HC)

    AMETEK PI - Model 932 - Multi-Gas H2S Analyzer (opt. + H2 and HC)

    The 932 uses a sophisticated UV-VIS photometer to measure up to five gas species for process monitoring and control for chemical processes. The 932 is provided as an explosion-proof package and our proprietary high-resolution UV-VIS technology which is completely free from water or hydrocarbon interference, maximizing measurement accuracy. A very flexible design, the 932 can be optionally equipped with additional sensors to add the capability to...

  • AMETEK PI - Model 933 - H2S in Natural Gas

    AMETEK PI - Model 933 - H2S in Natural Gas

    The 933 is a unique UV-based photometric analyzer system for H2S analysis when present in concentrations below 100 ppm in natural gas and other applications. The analyzer responds quickly to changes in H2S concentration and it quickly self-recovers from extreme upset conditions.

  • AMETEK PI - Model 934 - Sensor Specific Gas Analyzer

    AMETEK PI - Model 934 - Sensor Specific Gas Analyzer

    The 934 is a rugged, analyzer adapted from the 931/932 UV analyzer platform for measurement of Hydrogen in Tail Gas Treating Units (TGTU) where the UV (H2S) is not required. The 934 analyzer system has a heated cell to avoid any hydrocarbon or water condensation. A fully integrated AMETEK Process Instruments sample system ensures reliable dew point control without running the risk of plugging, contaminating, or...

  • AMETEK PI - Model 9900RM - Single or Multi-Component Gas Analyzer

    AMETEK PI - Model 9900RM - Single or Multi-Component Gas Analyzer

    The 9900RM is a single or multi-component gas analyzer that can be used alone or as an integrated part of a continuous emissions monitoring (CEM) system. The analyzer is 19” rack-mountable and supports Modbus/RS485 and Ethernet connectivity. This is a rugged, single or multi-gas analyzer, free of interference from water and CO2.

  • X-Ray Transmittance

    In x-ray transmission (XRT), a sample is irradiated with high-energy x-rays, which are absorbed by sulfur atoms. Measuring the x-rays that pass through the sample provides a measurement of sulfur concentration. AMETEK Process Instruments offers a dedicated XRT solution for the analysis of sulfur in on-line monitoring applications. This fulfils a key role in refining, terminal operations and marine fuel analysis applications.

  • ASOMA - Model 682T-HP - Sulfur Analyzer

    ASOMA - Model 682T-HP - Sulfur Analyzer

    The 682T-HP is designed for the on-line analysis of sulfur in highly viscous hydrocarbons such as crude and residual oil using XRT (X-ray Transmission) technology. This system is ideal for high temperature and pressure sample streams. With its rugged, time-proven proportional counter detector and X-ray tube source, the 682T-HP gives superb analytical precision with a sulfur limit of detection of 200 ppm. The 682T-HP key features include a fully...

  • Zirconia Oxygen Analyzers

    Zirconium oxide is a trusted, industry-proven sensing technology for fast and accurate oxygen analysis in a wide range of applications, particularly combustion processes. Capable of measuring oxygen at percentage or parts-per-million levels, zirconium oxide sensors can be used in both extractive and insitu probe instruments, providing solutions for a wide range of industries.

  • Thermox WDG-V - Combustion Analyzer

    Thermox WDG-V - Combustion Analyzer

    The reliable identification of low combustion oxygen in a fired heater or boiler has always been critical to the effectiveness of the Burner Management System for proper control and safety. Low emission burners and aggressive firing control points to achieve increased efficiency and emission reductions have driven the industry to tighter control measures.  But tighter control measures also hold a greater potential for combustion events. Reducing...