335 products found
Markes International Ltd - a company of the Schauenburg International Group Products
-
Thermal Desorption Instrumentation - Sorbent Tube Analysis
There are two types of sampling with sorbent tubes – pumped and passive. Using pumped sampling, air is pulled through a sorbent tube using a pump. Single-bed or multi-bed tubes can be used. A constant flow of gas into the vessel aids release of analytes onto a sorbent tube. Typical analytes monitored by this method are in the range C3 to C44. Sampling is quick (minutes to hours) and a wide range can be monitored in one run. The technique is ideal for all types of ambient air monitoring. With passive sampling, analytes migrate across an air gap onto a bed of sorbent. Here, only single-bed tubes can be used. Typical analytes monitored are also in the range C3 to C44. Passive sampling is easy to deploy but is relatively slow. The technique is commonly used for factory fenceline monitoring and personal monitoring.
-
Markes - Model TD100-xr - Multi-Tube Thermal Desorber for High-Throughput Automated Analysis
TD100-xr™ is an automated thermal desorption system for the rapid and unattended processing of up to 100 × 3½-inch sorbent tubes in a single sequence. It’s the perfect thermal desorption unit for high-throughput analytical laboratories needing to process large numbers of tube-based samples ...
-
Markes - Model UNITY-ULTRA-xr - Multi-tube Thermal Desorber with Advanced Upgrade Options
UNITY–ULTRA-xr™ is an automated thermal desorption system for the rapid and unattended sampling of up to 100 sorbent tubes in a single sequence. Additional options include autosamplers for canister, bag or on-line analysis. The UNITY–ULTRA-xr is the ideal platform for labs requiring the flexibility to expand their capabilities to extended analyte ranges and varied sample types while maximising sample ...
-
Markes - Model UNITY-ULTRA-xr Pro - Multi-tube Thermal Desorber with Advanced Re-Collection Options
UNITY–ULTRA-xr Pro™ is our highest capacity, automated thermal desorption system for the unattended sampling of up to 199 sample tubes in a single sequence. Its automated re-collection of tube and trap desorption split flows is unique to Markes and provides the most comprehensive re-collection options and enhanced sample security. It is ideal for laboratories needing to rapidly process large numbers of tube-based samples and take full ...
-
Markes - Model UNITY-xr - Single-Tube Thermal Desorption Unit
UNITY-xr™ is an industry-leading analytical TD instrument that provides exceptional performance for VOCs and SVOCs collected onto 3½-inch sorbent tubes, while offering unmatched upgrade flexibility for tube, canister and on-line automation. It’s perfect for laboratories with low throughput requirements that are starting out in TD, or for analysts needing a versatile thermal desorber for all their TD applications (whether tubes, ...
-
Markes - DAAMS Instruments
Automated thermal desorption for 4½" sorbent tube analysis. Markes’ new TD100-xr DAAMS and UNITY–ULTRA-xr™ DAAMS systems are high-throughput, automated thermal desorption instruments for streamlined analysis of 4½″ Depot Area Air Monitoring Systems (DAAMS) tubes. Markes’ TD100-xr DAAMS and UNITY–ULTRA-xr™ DAAMS are ideal for laboratories needing to analyse chemical agents for homeland security ...
-
Markes - Model Centri - Automated Multi-Mode Extraction and Enrichment Platform for GC-MS
Powered by best-in-class robotic automation, and using a modular design, Centri® gives unrivalled flexibility for unattended, rapid and efficient extraction and enrichment of VOCs and SVOCs. With its four sampling modes, Centri offers maximum versatility for liquid, solid and gaseous samples. Innovation lies at the heart of Centri. Incorporating Markes’ advanced cryogen-free focusing trap technology, Centri optimises ...
-
Thermal Desorption Instrumentation - On-line Sampling & Analysis
During on-line sampling, air is pulled directly into a sorbent-packed focusing trap. Typical analytes monitored by this method are freons and C2 hydrocarbons up to C14. On-line sampling is ideal for ultra-volatiles and is commonly used for continuous monitoring for source apportionment, rapid detection of hazardous compounds and atmospheric research.
-
Markes - Model UNITY-Air Server-xr - Cryogen-Free Automated Thermal Desorption System for Unattended On-line Air Monitoring
UNITY–Air Server-xr™ is an air monitoring system that introduces a controlled flow of sample directly into an integral focusing trap, allowing automated on-line analysis of VVOCs and VOCs in air or gas. It’s ideal for round-the-clock air monitoring of volatiles such as PAMS ozone precursors and odorous species, especially in remote locations where unattended sampling at time specific intervals is ...
-
Markes - Model UNITY-CIA Advantage-xr - Cryogen-Free, Automated Canister and Whole Air Preconcentration System
UNITY–CIA Advantage-xr™ is an inert, multi-channel system for the automated analysis of VOCs in canisters and bags. It has capacity for up to 27 channels, operates completely without cryogen, and is also compatible with on-line and tube-based sampling. It’s the ultimate system for high-throughput laboratories running the canister-based methods US EPA TO-15/TO-15A and Chinese EPA HJ 759. It is also ideal for analysts needing a ...
-
Markes - Micro-Chamber/Thermal Extractor - High Temperature
Fast and flexible sampling of chemical and odours released from materials and food. Micro-Chamber/Thermal Extractor™ (µ-CTE™) is a practical tool for rapid emission screening in R&D or as part of routine factory production control. It can be used to check surface or bulk emission profiles and to assess raw materials and compare products across a range. Applications include construction materials, car trim, consumer products and ...
-
Model TT24-7 - Advanced Thermal Desorber
Advanced thermal desorber for uninterrupted monitoring of trace chemical vapours. TT24-7™ is a thermal desorption unit for continuous near-real-time (NRT) monitoring of VOCs and VVOCs in air or gas. TT24-7 ensures 100% data capture by using a twin-trapping design that can accommodate a wide range of sampling flow rates, and operates completely cryogen-free. It’s an ideal TD system for those needing to continuously monitor air or gas streams ...
-
Thermal Desorption Instrumentation - Canister & Bag Sampling & Analysis
With canister and bag sampling, air flows at a controlled rate into an evacuated canister or bag. The air sample is then transferred to a sorbent-packed focusing trap. Typical analytes monitored are freons and C2 hydrocarbons up to C10. Canister and bag sampling are ideal for ultra-volatiles and are commonly used for ambient air monitoring for volatile ‘air toxics’ and atmospheric research.
-
Markes - Model UNITY-CIA Advantage-xr - Cryogen-Free, Automated Canister and Whole Air Preconcentration System
UNITY–CIA Advantage-xr™ is an inert, multi-channel system for the automated analysis of VOCs in canisters and bags. It has capacity for up to 27 channels, operates completely without cryogen, and is also compatible with on-line and tube-based sampling. It’s the ultimate system for high-throughput laboratories running the canister-based methods US EPA TO-15/TO-15A and Chinese EPA HJ 759. It is also ideal for analysts needing a ...
-
Thermal Desorption Instrumentation - Accessories
Accessories to enhance your thermal desorption instruments and sampling.
-
Markes - Model Kori-xr - Cryogen-free Water Management Module for Online and Canister Samples
Kori-xr™ is a module that efficiently removes humidity from canister or on-line samples acquired using Markes International’s UNITY-xr systems, without affecting analyte recovery. It’s ideal for laboratories needing to carry out on-line or canister analysis of humid air streams while avoiding the loss of polar species, oxygenates and monoterpenes that can occur with other approaches to water ...
-
Markes - Model TC-20 & TC-20 TAG - Conditioning and Dry-Purging Units for Multiple Sorbent Tubes
TC-20™ and TC-20 TAG™ are compact, stand-alone devices for the simultaneous conditioning or dry-purging of up to 20 thermal desorption sorbent tubes. TC-20 is used by thermal desorption–GC analysts who want to improve their laboratory’s productivity by avoiding using valuable instrument time for conditioning sorbent tubes. TC-20 TAG is a variant of the TC-20 for those who use Markes’ RFID TubeTAG tube tagging system with ...
-
ACTI-VOC
-
ACTI-VOC - Model C-LFP-01 - Low-Flow Pump Kit
ACTI-VOC is a robust low-flow pump for sampling vapour-phase organic compounds (VOCs) onto sorbent tubes for subsequent analysis by thermal desorption (TD). Being lightweight, easy-to-use and intrinsically safe, ACTI-VOC is ideal for personal monitoring and a wide range of other air and gas sampling ...
-
ACTI-VOC PLUS
-
ACTI-VOC PLUS - Model C-FFP-01 - Fast-Flow Pump Kit
ACTI-VOC PLUS™ is a robust fast-flow pump kit for sampling volatile organic compounds (VOCs) onto sorbent tubes for analysis using thermal desorption (TD). With an extended flow range compared to the ACTI-VOC, ACTI-VOC PLUS is ideal for sampling semi-volatile organic compounds (SVOCs), where the flows required are in the region of 300–500 ...
-
Calibration Solution Loading Rig (CSLR)
-
Markes - Model C-CSLR - Calibration Solution Loading Rig (CSLR)
Markes’ Calibration Solution Loading Rig (CSLR) has been designed for loading sorbent tubes with gas- or liquid-phase standards. It allows you to calibrate the entire TD–GC–MS analytical system for qualitative and quantitative analysis. It is used as part of routine quantitative analysis, or when changing methods and/or analytical conditions.
Markes - Model C-SPTA - Septum - for CSLR
Markes’ Calibration Solution Loading Rig (CSLR) has been designed for loading sorbent tubes with gas- or liquid-phase standards. It allows you to calibrate the entire TD–GC–MS analytical system for qualitative and quantitative analysis. It is used as part of routine quantitative analysis, or when changing methods and/or analytical conditions.
Certified Reference Standard Tubes
Markes - Model C-BTX100-10 - Certified Reference Standard (CRS) Tube (BTX)
Certified reference standard (CRS) tubes are packed sorbent tubes loaded with certified levels of relevant analytes. Prepared by an expert national standard laboratory to ensure high accuracy in loading levels, they are a convenient tool for in-house quality assurance and auditing of the complete TD–GC(–MS) analytical process, including calibration protocols.
Check-Standard Tubes
Markes - Model C-CHK10 - Check-standard (CHK) Tube(BTX- IBMA and Dioctyl Phthalate)
90 ng loading of BTX- isobornyl methacrylate (IBMA) and dioctyl phthalate standard onto Tenax tube- pk ...
DAAMS Tubes
Markes - Model C0-LXXX-0000 - Empty - glass DAAMS tubes (6mm x 4.5-inch)
Depot Area Air Monitoring Systems (DAAMS) tubes are sorbent tubes used for air sampling in chemical defence and counter-terrorism applications and subsequent analysis by TD–GC–MS.
Without restriction - requires torsion spring on either end of ...
Markes - Model C0-VXXX-0000 - Empty - Inert-Coated DAAMS Tubes (6mm x 4.5-inch) - with primary gauze - pk 10
Depot Area Air Monitoring Systems (DAAMS) tubes are sorbent tubes used for air sampling in chemical defence and counter-terrorism applications and subsequent analysis by TD–GC–MS.
With primary gauze - pk ...
Markes - Model C1-LXXX-7001 - Tenax TA- Glass DAAMS Tubes (6mm x 4.5-inch)
Depot Area Air Monitoring Systems (DAAMS) tubes are sorbent tubes used for air sampling in chemical defence and counter-terrorism applications and subsequent analysis by TD–GC–MS.
pk ...
Markes - Model C1-LXXX-7003 - HayeSep D - Glass DAAMS Tubes (6mm x 4.5-inch)
Depot Area Air Monitoring Systems (DAAMS) tubes are sorbent tubes used for air sampling in chemical defence and counter-terrorism applications and subsequent analysis by TD–GC–MS.
pk ...
Markes - Model C1-VXXX-7010 - Tenax TA (20/35) - Inert-Coated DAAMS Tubes (6mm x 4.5-inch)
Depot Area Air Monitoring Systems (DAAMS) tubes are sorbent tubes used for air sampling in chemical defence and counter-terrorism applications and subsequent analysis by TD–GC–MS.
pk ...
Markes - Model C1-VXXX-7012 - HayeSep D- Inert-Coated DAAMS Tubes (6mm x 4.5-inch)
Depot Area Air Monitoring Systems (DAAMS) tubes are sorbent tubes used for air sampling in chemical defence and counter-terrorism applications and subsequent analysis by TD–GC–MS.
pk ...
Diffusion Caps for Passive Sampling
Markes - Model C-DF010 - Diffusion Cap- Aluminium
Diffusion caps are used to define the air gap between the sampling environment and sorbent surface during diffusive sampling (also known as axial or passive sampling). Used in combination with a single-bed sorbent tube, penclip and aluminium long-term storage cap (at the other end of the tube), diffusion caps offer a simple to use, lightweight approach to personal monitoring.
Diffusion-Locking Caps (DiffLok)
Markes - Model C-DLS10 - DiffLok Cap-Inert
DiffLok™ caps sit on both ends of a sorbent tube throughout the entire analytical sequence, in all Markes’ automated thermal desorption instruments. Their patented design prevents loss of sample and ingress of contaminants onto the tube, and avoids the need for complex robotics to cap and uncap tubes. DiffLok caps are available in stainless and inert-coated stainless steel.
Easy-VOC Pump
Markes - Model C-EZVOCPO - Easy-VOC Grab-Sampler Pump Kit
Easy-VOC is a hand-operated pump kit for rapid ‘grab-sampling’ of precise volumes of air/gas directly onto sorbent tubes, for subsequent analysis by thermal desorption (TD). In contrast to canister sampling, grab-sampling onto sorbent tubes allows analytes from a wider volatility range to be sampled (in the region of C2/3 to n-C44), plus many polar and reactive species.
Empty Sorbent Tubes
Markes - Model C0-AXXX-0000 - Empty - Stainless Steel Tubes
Empty industry-standard thermal desorption tubes are available in stainless steel, inert-coated stainless steel and glass. They are typically used as carrier tubes: stainless steel and inert-coated tubes are primarily used to hold HiSorb probes or radial sorbent cartridges in a thermal desorption instrument, and glass tubes are primarily used for direct desorption.
Focusing (cold) Traps Thermal Desorption
Markes - Model U-T10CW-2S - Focusing trap- Chemical Weapons
Focusing (cold) traps for UNITY-xr, TD-100, Centri. For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T12ME-2S - Focusing trap- Material Emissions
Focusing (cold) traps for UNITY-xr, TD-100, Centri. For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T13DHS-2S - Focusing trap- Dynaminc Headspace (DHS)
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T14H2S-2S - Focusing trap- Hydrogen Sulphide (H2S)
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T15ATA-2S - Focusing Trap- Air Toxics Analyser
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T16GHG-2S - Focusing Trap- Green House Gases Analyser
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T17O3P-2S - Focusing Trap- Ozone Precursor
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T18325-2S - Focusing Trap- Method 325
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T19PAH-2S - Focusing Trap- PAH/SVOC
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T1HBL-2S - Focusing Trap- High Boilers
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T20PAM-2S - Focusing Trap - Photochemical Assessment Monitoring Stations (PAMS)
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T22117-2S - Focusing Trap- China Air 117
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T2GPH-2S - Focusing Trap- General Purpose (Hydrophobic)
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T3ATX-2S - Focusing Trap- Air Toxics (TO-14)
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T4WMT-2S - Focusing Trap - Water Management
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T5O3F-2S - Focusing trap- Ozone Precursor/Freons
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T6SUL-2S - Focusing Trap- Sulfur (Labile)
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T7EMP-2S - Focusing Trap - Empty
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T9TNX-2S - Focusing Trap- Tenax
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-TO15-KXR - Focusing Trap - Trace TO-15
For UNITY-xr (and series 2) with ...
Markes - Model U-T3ATX-2S - Focusing trap- Air Toxics (TO-14)
For UNITY-xr (and series 2)- TD-100 (all series) and ...
Markes - Model U-T5O3F-2S - Focusing trap- Ozone Precursor/Freons
For UNITY-xr (and series 2)- TD-100 (all series) and ...
HiSorb
Markes - Model C-HSPKIT-01 - HiSorb Starter Kit (PDMS)
HiSorb™ probes are designed for use with industry-standard sorbent tubes or used directly in the Centri automated sample extraction platform. HiSorb probes are able to sorptively extract VOCs and SVOCs from a range of sample types, including water-based solutions, emulsions and suspensions, as well as solids with both immersive and headspace sampling.
Short, ...
Markes - Model C-HSPKIT-02 - HiSorb Starter Kit (PDMS/CWR)
HiSorb™ probes are designed for use with industry-standard sorbent tubes or used directly in the Centri automated sample extraction platform. HiSorb probes are able to sorptively extract VOCs and SVOCs from a range of sample types, including water-based solutions, emulsions and suspensions, as well as solids with both immersive and headspace sampling.
Short, ...
Markes - Model C-HSPKIT-03 - HiSorb Starter Kit (PDMS/DVB)
HiSorb™ probes are designed for use with industry-standard sorbent tubes or used directly in the Centri automated sample extraction platform. HiSorb probes are able to sorptively extract VOCs and SVOCs from a range of sample types, including water-based solutions, emulsions and suspensions, as well as solids with both immersive and headspace sampling.
Short, ...
Markes - Model C-HSPKIT-04 - HiSorb Starter Kit (DVB/CWR/PDMS)
HiSorb™ probes are designed for use with industry-standard sorbent tubes or used directly in the Centri automated sample extraction platform. HiSorb probes are able to sorptively extract VOCs and SVOCs from a range of sample types, including water-based solutions, emulsions and suspensions, as well as solids with both immersive and headspace sampling.
Short, ...
Micro-Chamber/Thermal Extractor
Markes - Model M-CTE250TI - Micro-Chamber/Thermal Extractor - High Temperature
The Micro-Chamber/Thermal Extractor™ (µ-CTE™) is a versatile and compact unit with up to six small cylindrical chambers that enables the sampling of chemicals released from products or materials. Released volatile and semi-volatile organic compounds (VOCs and SVOCs) are collected onto sorbent tubes for analysis by TD–GC–MS.
4 inert micro-scale chambers (114 mL) - temperatures < 250 degree C- with toggle valves ...
MTS-32 (Multiple-Tube Sampler)
Markes - Model MTS-32 - Multi-Tube Sequential Sampler
The MTS-32 Multi-tube sequential sampler is a compact, robust, and portable sampler, designed for unattended sampling of air onto a series of sorbent tubes. Ambient air is pulled sequentially through a series of up to 32 industry-standard thermal desorption tubes by a low-flow sampling pump. Each tube is sampled at the same flow rate, so that the same volume of air is ...
SPME
Markes - Model S2-FIB-P-100/10-P1 - Smart SPME Fiber- PDMS
SPME 100 micrometer thickness- 10 mm length- red- pk ...
Markes - Model S2-FIB-P-100/10-P3 - Smart SPME Fiber- PDMS
SPME 100 micrometer thickness- 10 mm length- red- pk ...
Markes - Model S2-FIB-P-100/10-P5 - Smart SPME Fiber- PDMS
SPME 100 micrometer thickness- 10 mm length- red- pk ...
Sorbent Tube Storage Caps - Long-Term
Markes - Model C-CF010 - Long-Term Storage Cap - Brass
1/4" ID- includes PTFE ferrule- pk ...
Markes - Model C-CF010-XZ - Long-term Storage Cap
6mm ID- includes PTFE ferrule- pk ...
Markes - Model C-CF020 - Long-term Storage Cap
1/4" ID- includes PTFE ferrule- pk ...
Markes - Model C-CF020-XZ - Long-term Storage Cap - Brass
6mm ID-includes PTFE ferrule- pk ...
Markes - Model C-CF100 - Long-term Storage Cap - Brass
1/4" ID- includes PTFE ferrule- pk ...
Markes - Model C-CF100-XZ - Long-term Storage Cap - Brass
6mm ID- includes PTFE ferrule- pk ...
Markes - Model C-CF200 - Long-term Storage Cap - Brass
1/4" ID- includes PTFE ferrule- pk ...
Markes - Model C-CF200-XZ - Long-term Storage Cap - Brass
6mm ID- includes PTFE ferrule- pk ...
Markes - Model C-CFA20 - Long-term Storage Cap- Aluminium
1/4" ID- includes PTFE ferrule- pk ...
Markes - Model C-CFA200 - Long-term Storage Cap- Aluminium
1/4" ID- includes PTFE ferrule- pk ...
TC-20
Markes - Model R-TC20-1 - TC-20 Sorbent Tube Conditioner
Tube conditioner- 115 ...
Markes - Model R-TC20-2 - TC-20 Sorbent Tube Conditioner
Tube conditioner- 230 ...
TD Mini-Tubes
Markes - Model C1-TXX-5386 - Thermal Desorption Mini-Tubes - Tnx TA
TD Mini-tubes are 60mm length glass sorbent tubes compatible with thermal desorption instruments such as Gerstel’s TDU and TDU2. TD Mini-Tubes are manufactured under stringently quality-checked conditions. Each tube is permanently labelled with a unique ID number, in clear barcode and numerical format to help you keep track of samples and tube stock. A sampling arrow is also printed on each tube to indicate direction of flow.
pk ...
TF SPME
Markes - Model C-TF-PDVB-KIT - Thin Film SPME Starter Kit
TF-SPME membrane- PDMS/DVB ...
Markes - Model C-TF-PHLB-KIT - Thin Film SPME Starter Kit
TF-SPME membrane- PDMS/HLB (Polydimethylsiloxane/Hydrophilic Lipophilic ...
Markes - Model C-TF-P-KIT - Thin Film SPME Starter Kit
TF-SPME membrane- PDMS ...
Sorbent tubes for thermal desorption
Tenax TA - Model C1-AAXA-5003 - Stainless Steel Tubes
Tenax TA- stainless steel tubes- conditioned/capped- custom etched- pk ...Carbopack X - Model C1-AAXA-5020 - Stainless Steel Tubes
Carbopack X- stainless steel tubes- conditioned/capped- custom etched- pk ...Tenax TA - Model C1-AAXX-5003 - Stainless Steel Tubes
Tenax TA- stainless steel tubes- conditioned/capped- pk ...Tenax GR - Model C1-AAXX-5005 - Stainless Steel Tubes
Tenax GR- stainless steel tubes- conditioned/capped- pk ...Molecular Sieve 5A - Model C1-AAXX-5007 - Stainless Steel Tubes
Molecular Sieve 5A- stainless steel tubes- conditioned/capped- pk ...Carbograph 1 - Model C1-AAXX-5009 - Stainless Steel Tubes
Carbograph 1- stainless steel tubes- conditioned/capped- pk ...Carbograph 2 - Model C1-AAXX-5012 - Stainless Steel Tubes
Carbograph 2- stainless steel tubes- conditioned/capped- pk ...Carbograph 5 - Model C1-AAXX-5015 - Stainless Steel Tubes
Carbograph 5- stainless steel tubes- conditioned/capped- pk ...Carbopack X - Model C1-AAXX-5020 - Stainless Steel Tubes
Carbopack X- stainless steel tubes- conditioned/capped- pk ...Carboxen 1000 - Model C1-AAXX-5027 - Stainless Steel Tubes
Carboxen 1000- stainless steel tubes- conditioned/capped- pk ...Markes - Model C1-AAXX-5028 - Stainless Steel Tubes
Carboxen 1000- stainless steel tubes- conditioned/capped- pk ...Markes - Model C1-AAXX-5153 - Stainless Steel Tubes
HayeSep D- stainless steel tubes- conditioned/capped- pk ...Markes - Model C1-AAXX-5277 - Stainless Steel Tubes
Carboxen 1003- stainless steel tubes- conditioned/capped- pk ...Markes - Model C1-AAXX-5312 - Stainless Steel Tubes
SulfiCarb- stainless steel tubes- conditioned/capped- pk ...Markes - Model C1-ACAX-5003 - Stainless Steel Tubes
Tenax TA- stainless steel tubes- conditioned/capped- TubeTAG- pk ...Markes - Model C1-ACAX-5020 - Stainless Steel Tubes
Carbopack X- stainless steel tubes- conditioned/capped- TubeTAG- pk ...Markes - Model C1-AXAX-5003 - Stainless Steel Tubes
Tenax TA- stainless steel tubes- TubeTAG- pk ...Markes - Model C1-AXAX-5020 - Stainless Steel Tubes
Carbopack X- stainless steel tubes- TubeTAG- pk ...Markes - Model C1-AXXA-5003 - Stainless Steel Tubes
Tenax TA- stainless steel tubes- custom etched- pk ...Markes - Model C1-AXXA-5020 - Stainless Steel Tubes
Carbopack X- stainless steel tubes- custom etched- pk ...Markes - Model C1-AXXX-5003 - Stainless Steel Tubes
Tenax TA- stainless steel tubes- pk ...Markes - Model C1-AXXX-5005 - Stainless Steel Tubes
Tenax GR- stainless steel tubes- pk ...Markes - Model C1-AXXX-5007 - Stainless Steel Tubes
Molecular Sieve 5A- stainless steel tubes- pk ...Markes - Model C1-AXXX-5009 - Stainless Steel Tubes
Carbograph 1- stainless steel tubes- pk ...
