MGA Controls Limited

129 products found

products

ASV Stubbe Butterfly Valves Overview
ASV Stubbe - Model K 210 (DN 50 – DN 200) - Chemical Butterfly Valve

Applications: Chemical plants, Industrial plants, Electroplating plants, Utilisation: For shutting off pipeline systems. Advantages: Double shaft seal, Body with O – ring, No additional flange sealings required. Flow media: Neutral and aggressive fluid or gaseous media free of solid particles
Herion NAMUR Valves
Herion NAMUR - Model 97300 Series - Solenoid Valve

NAMUR is an interface which allows pilot valves to be mounted on larger valves or actuators, allowing them to be controlled. Herion’s range of NAMUR valves cover all bases, from basic aluminium valves right through to stainless steel valves for use in hazardous areas. 3/2, 5/2 Way Spool Valves, NAMUR Solenoid...
Norgren Process Valves

Norgren process valves are the most comprehensive on the market and are suitable for use on all types of fluid, from compressed air right through to aggressive acids or superheated steam. Norgren process valves are available in a large range of sizes and in varying body and seal materials dependant on the application. Call our fully trained technical sales team today to discuss which valve in the
IMI - Model 96000 Series - Directly Actuated Poppet Valves

3/2-Way Valves, electromagnetically directly actuated poppet valves.
Industrial Valves - Plug Valves
Val-Matic - Plug Valves

The Cam-centric Plug Valve takes all the design features found in most high quality Eccentric plug valves, and improves them through innovative design and technology to provide the market with a more efficient, more reliable and cost-effective
AVCO - Model 1500 Series - Ball Valve

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline.
Burkert - Model Type 2012 - Pneumatically Operated 2/2-Way Globe Valve

The Bürkert Type 2012 is a Process valves for either ON/OFF or continuous control in brass, stainless steel and plastic. The externally piloted globe valve consists of a pneumatically operated piston actuator and a 2/2-way globe style valve body. The actuator is made of PA or, for special operating conditions, PPS and the reliable self-adjusting packing gland provides high sealing integrity. These maintenance-free and robust valves can be...
Burkert - Model Type 2002 - Pneumatically Operated 3/2-Way Globe Valve

The Bürkert Type 2002 pneumatically operated 3/2-way valve is operated with a piston actuator. The reliable self-adjusting packing gland provides high sealing integrity, while various fluidic circuit functions can be obtained by a simple exchange of the pressure and service ports.These maintenance-free and robust valves can be retro-fitted with a comprehensive range of accessories for position indication or manual override. Various body and seal...
Model PB2NS-LM - Alco Valves Ball Valve

The PB2NS-LM is a Ball Valve from Alco Valves. Manufactured from 316 Stainless Steel with PVDF seats, it is suitable for a wide range of Oil & Gas applications. It features 3 piece construction, and is rated for use with pressures up to 6,000 psi and temperatures ranging -40. . .150°C.
2-Way Solenoid Valves
Buschjost - Model 82540 Series - Brass Solenoid Valve - General Purpose

The Buschjost 82540 Series is a 2/2-Way Zero Rated Brass Solenoid Valve with Forced Lift, for neutral gases and liquids in general purpose applications. The compact design, high flow rate and damped closing ensure reliability and maintenance free operation. Available with a range of diaphragm materials for use with varying media, in sizes from 1/4″ to 2″ and in either Normally Closed or Normally Open functions, the Buschjost 82540...
Bürkert - Model Type 0255 - High Pressure Solenoid Valves

The Bürkert Type 0255 is a high performance plunger operated, direct-acting solenoid valve which is suitable for high pressures and high temperatures. It features an integrated metallic body seal and wear resistant stainless steel seat which delivers unrivalled reliability. It is suitable for various media including but not limited to Water, Air, Steam and Fuel.
Butterfly Valves

MGA Controls Ltd can provide a comprehensive range of standard Quarter-turn Butterfly Valves, specialist High Performance Butterfly Valves and Actuated Butterfly Valves in various sizes, materials and body designs. Our range of Butterfly valves are suitable for many industries such as Process, Mining, Food & Beverage, Oil & Gas, Sea transportation, Water, Wastewater Treatment & Irrigation, Pharmaceutical, Power and Process industries.
ABO - Model Series 500 - High Performance PTFE Lined Butterfly Valves

The ABO Series 500 is a high performance PTFE lined butterfly valve, specifically designed for use with acids and other aggressive media. The split shaft system and highly profiled disc of the Series 500 high performance butterfly valve ensurse high Kv (Cv) value and lower pressure drop. The ABO split shaft system also offers a bigger cross-section area compared to single-pieced shaft versions, helping contribute to increased...

Products by Durapipe - an Aliaxis Company

Building Services Piping System
SuperFLO - Plastic Piping System

Durapipe SuperFLO ABS is a plastic piping system for chilled and cold water applications & other environmental control systems. SuperFLO ABS is a solvent welded, fully matched pipework system incorporating pipe, fittings & valves that is available in both imperial and metric sizes. The system provides a wide temperature range and the system remains extremely ductile even at temperatures as low as -40⁰C. Furthermore, ABS is...
Vulcathene - Laboratory Chemical Drainage System

Vulcathene is a completely purpose-designed chemical resistant plumbing system that has been specified and installed in the laboratories of schools, universities, hospitals and research facilities worldwide for over 50 years.Tried, tested and proven, Vulcathene is the only industrial chemical drainage system to have withstood the test of time in the most demanding of laboratory applications.Two easy jointing methods, mechanical for demountable joints...
Durapipe - Model HTA - C-PVC Pipework System

Durapipe HTA is a complete C-PVC pipework system for domestic hot and cold water services, providing secure, quicker and easier installations. Durapipe HTA is a cost-effective alternative to copper. Significant cost savings can be achieved against copper due to the installed time savings available via the simple jointing method and the product being lightweight. Durapipe HTA offers a 50 year design-life and due to the high quality material the...
Durapipe - Model PLX Series - Fusion Welded Pipework Systems

Durapipe PLX is a complete range of dedicated fusion-welded pipework systems for the safe transfer of fuels. Suitable for use with leaded, unleaded petroleum, including ethanol rich alternative fuels (E85), diesel, bio-diesel and fuel oils.The Durapipe PLX range represents a major innovation in pipework technology as it offers the ultimate in environmental protection with maximum protection against permeation and leak free joints. Durapipe PLX is...
Friaphon - Sound Reducing Drainage System

A purpose-designed sound reducing drainage system complete with soundproof fittings, that offers outstanding sound insulation properties compared with traditional cast iron or lagged single wall plastic drainage systems. Friaphon is constructed with dual layer technology and offers exceptional sound reduction properties from noises emitted by sanitary installations in buildings with recorded sound levels as low as 15dB(A). Lower material costs...
Industrial Services Piping System
Durapipe - Model FIP PVC-U - Chemicals And Industrial Fluid Handling Piping System

Our PVC-U pipe and fittings provide excellent chemical resistance making it ideal for various industrial applications. PVC-U allows the safe transportation of many acids, alkalis and chemical concentrates without fear of corrosion and environmental pollution. Durapipe FIP PVC-U is a solvent welded, fully matched pipework system incorporating pipe, fittings and valves that is available in both imperial and metric sizes. PVC-U is lightweight and...
Durapipe Guardian - Model HDPE Series - Dual Contained Pipework System

Durapipe Guardian is a completely new Dual Contained pipework system made from PVC-U material. Guardian is a unique system that incorporates a patented Centra-Lok™ system, which provides a solid fixed fitting, offering a true point of difference from other dual contained systems on the market. Manufactured in PVC-U material, Durapipe Guardian is ideal for water and waste treatment applications as it allows the safe transportation of...
Durapipe Guardian - Polypropylene Pipe

Durapipe Polypropylene is specially designed to convey the most hazardous of chemicals at elevated temperatures. Polypropylene pipe has excellent chemical and abrasion resistance properties making it ideal for a range of industrial pipe supply purposes. It's characteristics are perfectly suited to process applications including pharmaceutical and chemical processing. Durapipe Polypropylene is jointed by either socket fusion, butt fusion or...
Durapipe Corzan - C-PVC Plastic Pipework System

Durapipe Corzan is a C-PVC plastic pipework system for handling hot, corrosive fluids. Corzan offers excellent performance levels in highly aggressive industrial conditions. The fully-matched plastic pipe system has the ability to convey hot acids and alkalis under pressure at elevated temperatures. The smooth surface of Corzan is corrosion resistant which makes it superior to metal pipework alternatives which can become prone to corrosion resulting...

Products by Mueller Water Products

Main Valves

Singer Valve. Real solutions for real applications. Everything you’ve ever wanted in an automatic control valve. At Singer Valve, we design and manufacture control valves that can handle extreme pressure, sense the slightest danger or call for back-up in emergencies. Each model is available in either the 106 Series Full Port or 206 Series Reduced Port. The 206 Series is similar to the 106 Series except that the seats are one standard pipe size smaller than the flange sizes. For example
Singer Valve - Model 106/S106-PG - Full Port, Single Chamber, Hydraulically Operated Valve

The 106-PG series control valve is designed to suit a large variety of applications such as pressure, flow or level control. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain accurate water control. Refer to Main Valve Options and Pilots & Accessories to customize the valve to suit specific applications.
Singer Valve - Model 206 / S206-PG - Reduced-Port, Single Chamber, Hydraulically Operated Valve

The 206-PG series control valve is the preferred choice for pressure reducing valves, flow control valves, relief valves and applications with lower to medium flows. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively...
Singer Valve - Model 106 / S106-PT / PTC - Full Port, Double Chamber, Hydraulically Operated Valve

The 106-PT and 106-PTC series control valves are hydraulically operated by introducing or releasing water from the control chambers. PT and PTC valves have two operating chambers that are divided from each other by the diaphragm, and are separated from the flowing media by an adaptor plate.
Singer Valve - Model 206/S206-PT/PTC - Reduced Port, Double Chamber Hydraulically Operated Valve

The 206-PT and 206-PTC series control valves are hydraulically operated by introducing or releasing water from the control chambers. PT and PTC valves have two operating chambers which are divided from each other by the diaphragm, and are separated from the flowing media by an adaptor plate.
Singer Valve - Model 106/S106-PGM - Full Port, Integral Back-Up, Dual Diaphragm, Automatic Control Valve

The 106-PGM and S106-PGM series control valves are designed for particularly sensitive applications or situations where valves are difficult to access and maintain. The PGM series control valves provide integral back-up control and the ability to signal should the desired function move off limits. It can also provide an independent and very positive override.
Singer Valve - Model 206/S206-PGM - Reduced Port, Integral Back-Up, Dual Diaphragm, Automatic Control Valve

The 206-PGM and S206-PGM control valves are designed for particularly sensitive applications or situations where valves are difficult to access and maintain. The PGM series control valves provide integral back-up control and the ability to signal should the desired function move off limits. It can also provide an independent and very positive override.
Singer Valve - Model 106-PG - Stainless Steel Full Port, Single Chamber, Hydraulically Operated Valve

The 106-PG series control valve is designed to suit a large variety of applications such as pressure, flow or level control. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain accurate water control.
Main Valve Options

Customize your valve by adding any of the available options.
Singer Valve - Model 106/206-GE - Grooved Ends

For use with grooved Iron Pipe Size (IPS) Pipe Coupling Products, grooved ends allows you to benefit from the simplicity and convenience of grooved end piping and fittings in an automatic control valve. There are a wide range of applications where grooved ends are relevant, but typical applications include municipal water, waste water, fire protection and plumbing.
Singer Valve - Model 106/206-IDC - Internal Drop Check (IDC)

The Internal Drop Check (IDC) ensures quick positive shut-off whenever normal forward flow stops, this action will prevent reverse flow while reducing surge events. The IDC assembly is a spring assisted, silent, mechanical check option for standard Singer main valves and comes in sizes ranging from 2 in / 50 mm – 36 in / 900 mm. The IDC is a standard feature on the 106-PTC and 206-PTC series control valves and is available as on optional add-on...
Singer Valve - Model 106/206-NYM - Internal Drop Check No Yellow Metal

Yellow metal components such as Brass, Bronze and Copper may not be acceptable materials in harsh water conditions or in specific specifications for a variety of reasons. All or any portion of yellow metals in the internals of main valves may be upgraded to stainless steel. All or any portion of yellow metals on pilots or pilot tubing and fittings may also be upgraded to...
Singer Valve - Model 106/206-RW - Reclaimed Water Valve

The 106-RW and 206-RW series control valves offer superior corrosion resistance performance in grey or reclaimed water applications and can be used in all standard and special applications. It’s constructed from materials which are selected specifically to address corrosion concerns from chlorine, chloramine, and other corrosive elements typically...
Singer Valve - Model X107 - Position Indicator Stem

The X107 position indicator stem is designed to provide direct indication of the diaphragm / inner valve position. The indicator stem moves up and down within its protective hexagonal brass housing. Within the housing is clear Pyrex sight glass, which allows viewing from both sides. Singer main control valves are designed with a separate stem cap that makes installation of the X107 safe and simple to do in the field.
Singer Valve - Model X156 - Linear Inductive Valve Position Transmitter

The X156 Linear Inductive Valve Position Transmitter electronically indicates the position of the valve and is ideal for applications where precision and accuracy is required. It is mounted directly to the main valve stem and uses an external source of 24VDC power, a 4 to 20mA signal proportional to valve stroke is generated and transmitted. The zero and span are fully...
Singer Valve - Model OX - Oxy-Nitride Stem

The Oxy-Nitride stem is ideally suited to reclaimed water applications and a wide range of other applications where mineral-build up is a concern. When minerals build-up on stems, it can cause potential maintenance problems and operational malfunctions. The Oxy-Nitride treated stainless steel...
Singer Valve - Model X129 - Limit Switch Indicator

The X129 limit switch is actuated by the opening and closing of a main valve. The assembly is fully adjustable over the entire valve stroke. Layout variations allow up to four separate switches to be mounted and actuated off the same stem.
Singer Valve - Model 106-AC - Anti-Cavitation Control Valve

The 106-AC series control valve is designed to solve high pressure drop problems by allowing smooth control and protection from cavitation damage. It’s ideal for applications where large pressure differentials preclude the use of standard automatic control valves and varying flows make orifice plates ineffective.
Pressure Reducing Valves

When faced with extreme pressures or anything in between, our pressure reducing valves maintain a uniform downstream pressure. Regardless of the problem, regardless of the application, our valves perform under pressure.
Singer Valve - Model 106/206-PR-SM - Pressure Reducing Control Valve with Integral Back-Up

The 106-PR-SM and 206-PR-SM series control valves are engineered to be used anywhere pressure reducing valve failure is unacceptable. These valves have a second and independent operating system superimposed upon the standard primary system. With the assurance of a back-up system, maintenance schedules may be extended as pressures will continue to be controlled even in the event of...
Singer Valve - Model 106/206-PFC - Pressure Flow Control (Modulation) Valve

The 106-PFC / 206 PFC Pressure Modulation Valve is a pressure reducing valve with a special (Patented) pilot that increases downstream pressure as flow increases. The PFC valve alters and controls pressure with flow to create virtually constant pressure at the critical pressure point in a system. It will also automatically adjust for distribution friction losses. The PFC valve will deliver consistent performance as it has no electrical components and...
Singer Valve - Model 106/206-PR - Pressure Reducing Valve

The 106-PR and 206-PR series pressure reducing valves are based on the 106-PG or 206-PG main valves. The pilot valves sense the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The downstream pressure is maintained virtually steady at the pilot set-point. In typical pressure reducing...
Singer Valve - Model 106/206-PR-48 - Pressure Reducing Valve with Low Flow By-Pass

The 106-PR-48 and 206-PR-48 series pressure reducing valves with low flow by-pass are based on the 106-PG or 206-PG main valve. In addition, a direct acting pressure reducing valve is piped in parallel, using the main valve back port connections. The pilot valve senses the downstream pressure through a connection at the main valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the main valve position by...
Singer Valve - Model 106/206-PR-C - Pressure Reducing and Check Valve

The 106-PR-C and 206-PR-C pressure reducing and check valves are based on the 106-PG or 206-PG main control valve. The pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The downstream pressure is maintained relatively steady at the pilot set-point.
Singer Valve - Model 106/206-PR-R - Pressure Reducing and Pressure Sustaining Valve

The 106-PR-R and 206-PR-R pressure reducing and pressure sustaining valves are based on the 106-PG or 206-PG main valve with the addition of the sustaining pilot 81-RP and pressure reducing pilot PR-160. Provided the upstream pressure setting is satisfied, the 81-RP pilot is kept open,...
Singer Valve - Model 106/206-PR-S - Pressure Reducing Valve with Downstream Surge Protection

The 106-PR-S and 206-PR-S pressure reducing valves with downstream surge control are based on the 106-PG or 206-PG main valve. Pressure reducing pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The downstream pressure is...
Singer Valve - Model 106/206-PR-SC - Pressure Reducing Valve with Solenoid Shutoff

The 106-PR-SC and 206-PR-SC pressure reducing valves with solenoid shut-off are based on the 106-PG or 206-PG main valve. The pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The downstream pressure is maintained...
Singer Valve - Model 106/206-2PR-630 - Pressure Management Valve

The Singer 106/206-2PR-630 Pressure Management Valve is a simple package to save water loss and money. It meets system needs by providing higher pressure when called for 24/7 and reduced pressure to save water leakage (and money) at all other times. An orifice with a low pressure drop 1.0 psi, (0.07 Bar) is installed upstream of a standard pressure reducing valve...
Relief /Sustaining/Surge Valves

You can count on Singer valves to do exactly what they are designed to do. Relieve pressure. Sustain differential pressure. Anticipate surges. Plus more. Whatever their purpose, our valves give you the protection your application needs. What a relief.
Singer Valve - Model 106/206-RPS - Pressure Relief Valve

The 106-RPS and 206-RPS pressure relief valves are based on the 106-PG and 206-PG main valves. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot setting. The valve opens rapidly to relieve damaging overpressure and closes smoothly at an adjustable speed, when the pressure returns below the set-point. The upstream pressure is limited to the...
Singer Valve - Model 106/206-RPS - Pressure Sustaining Valves

The 106-RPS and 206-RPS pressure sustaining valves are based on the model 106-PG or 206-PG main valve. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot setting.
Singer Valve - Model 106/206-RPS-D - Pressure Differential Sustaining Valve

The 106-RPS-D and 206-RPS-D pressure differential sustaining valves are based on the 106-PG or 06-PG main valve. The RPS-D uses the 81-RPD pilot valve and has two sensing connections. The valve and pilot remain closed until the difference between the two pressures exceeds the pilot setting. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The pilot...
Singer Valve - Model 106/206-RPS-L&H - Surge Anticipating Relief Valve

The 106-RPS-L&H and 206-RPS-L&H anticipating surge relief valves are based on the 106-PG or 206-PG main valve. The valve is mounted in a tee, downstream of the pump check valve(s). It is designed to anticipate surges to avoid the severe water hammer often associated with power failure surges.
Singer Valve - Model 106/206-RPS-RR - Surge Anticipating on Rate of Rise of Pressure Relief Valve

The 106-RPS-RR and 206-RPS-RR surge anticipating relief on rate of rise valves are based on the 106-PG or 206-PG main valve. The valve is installed downstream of the pump check valve(s) and has two pilots, the 81-RP and the 81-RPD. Both pilots sense pressure through a connection to the header pipe. The 81-RP high pressure pilot acts as a standard relief pilot, opening on excessive pressure. The 81-RPD differential pilot responds to the pressure...
Singer Valve - Model A106-DL - Dynamic Lifter Spring Pressure Relief Valve

The A106-Dynamic Lifter (DL) sewage pressure relief valve is a direct acting spring loaded relief valve. The valve is adjusted to open when the pressure exceeds the set-point, which is approximately 10% above the normal operating pressure. The valve closes drip-tight when pressure falls below the set-point. The DL is connected on a tee off the main line and usually discharges relief flow back to the main sump to reduce the surge over-pressure. A speed...
Singer Valve - Model A106-DL-Air / A106-DL-ET - Dynamic Lifter Air Operated Pressure Relief Valve

The Model A106-DL-Air is a compact sewage relief valve that is suitable for high pressures up to 200 psi / 13.8 bar, responds very quickly and retains all the features and benefits of the Model A106-DL Spring–Hydraulic version. It is an attractive solution to what may be otherwise a difficult application due to higher pressures or space height limitations. The Model A106-DL-Air-ET retains all the features and benefits of the Model A106-DL-Air...
Pump Control Valves

Pump control valves are designed to prevent surges associated with the starting and stopping of pumps. Pump control valves are available in double chamber design for both in-line and by-pass applications. As an economical alternative, single chamber pump control valves are also available.
Singer Valve - Model 106/206-PG-BPC - Booster Pump Control Valve – Single Chamber

The 106-PG-BPC or 206-PG-BPC booster pump control valve is installed in-line directly downstream of the pump discharge. The valve is normally closed, and, on pump start-up, a pilot solenoid is energized to slowly open the valve, at a rate governed by the opening speed control. The pipeline flow is gradually increased.
Singer Valve - Model 106/206-BPC - Booster Pump Control Valves - Double Chamber

The 106-BPC and 206-BPC booster pump control valves are installed in-line, directly downstream of the pump discharge. The pump control valve is normally closed and on pump start-up, a pilot solenoid is energized to open the valve, at a rate governed by the opening speed control. When shut-down is required the pilot solenoid on the valve is de-energized to commence closing. The pump is kept running while the valve slowly closes. When the valve is...
Singer Valve - Model 106/206-DW - Deep Well Pump Control Valve – Double Chamber

The 106-DW and 206-DW deep well pump control valves are installed in a tee between the pump discharge and the check valve. The valve is normally open, and, on pump start-up, a pilot solenoid is energized to start closing the valve at a rate governed by the closing speed control.
Singer Valve - Model 106/206-HC - Hydraulic Check Valves

The 106-HC and 206-HC hydraulic check valves are based on the 106-PG or 206-PG main valve. The valve functions as a two position valve - either fully open or fully closed. The HC allows one way flow only. Under normal forward flow, the valve opens as the higher inlet pressure lifts the inner valve assembly and the fluid in the upper chamber is discharged to the lower pressure, downstream side of the valve.
Level Control Valves

Level control valves are used to prevent overflow in tanks, towers, and reservoirs. Float valves use direct-acting, lever-operated pilots to directly control the maximum water level. Altitude valves control the level from ground level using the hydrostatic head. Altitude valves are available with fixed or adjustable drawdowns and as one-way or two-way flow control.
Singer Valve - Model 106/206-A-Type 1 - Two-Way Flow Altitude Control Valve

The 106-A-Type 1 and 206-A-Type 1 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 1 allows normal forward flow to fill the reservoir to the maximum level and then closes drip-tight at the set-point. It opens to allow reverse flow through the valve when the supply pressure...
Singer Valve - Model 106/206-A-Type 2 - One-Way Flow Altitude Control Valve

The 106-A-Type 2 and 206-A-Type 2 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 2 valve allows normal forward flow to fill the reservoir to the maximum level and then closes drip-tight at the set-point. It opens to refill the tank once the level drops a fixed distance below...
Singer Valve - Model 106/206-A-Type 3 - Two-Way Flow Altitude Control Valve with Differential Control

The 106-A-Type 3 and 206-A-Type 3 altitude control valves are based on the 106-PG or 206-PG main valve, and are ideal for maintaining preset maximum level. The Type 3 allows normal forward flow to fill the reservoir to the maximum level, then closes drip-tight at the set-point. The valve opens to permit reverse flow through the valve when the supply pressure drops an adjustable amount below the reservoir head. The Type 3 will then allow normal forward...
Singer Valve - Model 106/206-A-Type 4 - One-Way Flow Altitude Control Valve with Differential Control

The 106-A-Type 4 and 206-A-Type 4 altitude control valves are based on the 106-PG or 206-PG main valve, and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 4 allows normal forward flow to fill the reservoir to the maximum level, then closes drip-tight at the set-point. It opens to refill the tank once the level drops an adjustable amount below the...
Singer Valve - Model 106/206-F-Type 4 - Modulating Float Valve

The Singer model 106-F-Type 4 and 206-F-Type 4 modulating float valves are based on the 106-PG or 206-PG main valve.They are ideal for balancing the inflow and outflow demand into the reservoir and maintaining level at the designated maximum.
Singer Valve - Model 106/206-F-Type5 - Non-Modulating Float Valve

The 106-F-Type 5 and 206-F-Type 5 non-modulating float valves are based on the 106-PG or 206-PG main valve. It is ideal for allowing normal forward flow to fill water reservoirs to a desired high level and where the pilot and valve of the reservoirs are easily accessible.
Flow Control Valves

Singer Flow Control Valves allow flows to meet a predetermined demand.
Singer Valve - Model 106/206-RF - Flow Limiting Control Valve

The 106-RF and 206-RF rate of flow control valves are based on the 106-PG or 206-PG main valves. The valve is ideal for limiting the flow to a pre-determined maximum (via maintaining a continuous pressure differential across an orifice). When the pressure differential is less than the set-point, the valve opens, allowing flow to meet predetermined demand. At the desired maximum set-point, the pilot reacts to small changes in sensing pressure and...
Singer Valve - Model 106/206-EF-8837BX - Excess Flow (Burst Control) Valve

The 106-EF-8837BX and 206-EF-8837BX excess flow valves are based on the 106-PT and 206-PT Double Chamber main valves. The valve is designed to shut-off tightly when flow exceeds a predetermined amount. The 625-RPD pilot senses the pressure drop of the valve and closes the valve when the tripping flow is reached. Typical pressure drop at tripping is 5 psi / 0.35 bar.
Electronic Control Valves

Singer Valve’s electronic control valves feature enhanced hydraulically operated control valves to meet the needs of a wide range of application requirements.
Singer Valve - Model 106/206-SC - Solenoid Control Valve

Singer models 106-SC and 206-SC solenoid control valves are based on the Singer model 106-PG or 206-PG main valve. The solenoid pilot valve provides on-off position operation. The solenoid either admits inlet pressure into the main valve operating chamber or releases pressure from the operating chamber. The pilot system is usually piped to discharge at the valve outlet, but can be piped to discharge to drain (atmosphere).
Singer Valve - Model 106/206-2SC-PCO - Dual Solenoid Control for Positioning and SCADA Controls

The Singer models 106-2SC-PCO and 206-2SC-PCO dual solenoid electronic valves are based on the Singer model 106-PG or 206-PG main valve. The flow into and out of the upper operating chamber is controlled by the two pilot solenoids. The electronic control determines whether the opening solenoid or the closing solenoid is operated. The change in valve position is dependent upon which solenoid is operated and the duration of the energized period.
Singer Valve - Model 106/206-2SC-MV - Electronic Flow Control and Metering System

The Singer models 106-2SC-MV and 206-2SC-MV electronic flow control and metering valves are based on the 106-PG or 206-PG main valve. The pressure in the upper operating chamber is controlled by operating the pilot solenoids. The PLC within the MV1-TP control panel determines whether the opening solenoid or the closing solenoid is operated. The change in valve position is dependent upon which solenoid is operated and the duration of the energized...
Singer Valve - Model SCP-TP - Single Process Control Panel Series

The SCP-TP Controller is a simplified process controller designed to complement the Dual Solenoid Control Valve. It offers quick and easy configuration for any single process application as well as on/off applications. The SCP-TP is also equipped to be configured to control the Singer 420DC Motor. Range of application is dependent on the process variable (feedback) transmitter used, which includes (but not limited to) common automatic control valve...
Singer Valve - Model MCP-TP - Multi Process Control Panel

The MCP-TP Series is a multiple process loop control panel designed to complement the Singer Model 2SC-PCO Dual Solenoid Control Valve. Range of application is dependent on the feedback (process variables) transmitters used, which is similar to (but not limited to) combination automatic control valve functions with conventional pilots.
Singer Valve - Model RPS-L&H-ET - Surge Anticipator Panel (SAP)

The SAP surge anticipator panel provides the interface between a customer supplied, system pressure switch and the Singer surge anticipating control valve. Together they provide protection against destructive pressure surges. The SAP panel energizes the control valve pilot solenoid on an abnormally low pressure reading and/or power failure to pumps. The 12 VDC pilot solenoid is energized to open the main valve and relieve the surge pressure from the...
Singer Valve - Model SPC - Pump Control Panel

The SPC pump control panel provides the interface between the pump motor starter and the Singer pump control valve. The SPC ensures that the pump starts and stops without causing line surges.
Singer Valve - Model 420-DC/AC - Electronic Control

The 420-DC or 420-AC provide for a reliable, simple and cost efficient way to automate today’s water systems. A sturdy slow speed 24 VDC motor actuator drive can be installed on a variety of Singer pilots. The motor actuator responds to a 4-20 mA signal, rotating the pilot adjusting screw corresponding to the change in signal. The number of turns is adjustable and may be...
Singer - Model 106-SPI-MV - Single Point Insertion Electromagnetic Flow Meter

The Singer Model 106-SPI-MV is a Single Point Insertion Electromagnetic Flow Meter, installed and calibrated in conjunction with a Singer Valve to provide an accurate flow rate that can be utilized with the metering valve as a stand alone option or built into a 106-2SC-PCO pilot system to provide complete flow-based valve control.
Singer Valve - Model LCP-TP - Level Control Panel

The LCP-TP Level Controller is a single process level controller designed to complement Singer Valve’s Single Solenoid Operated/Override Control Valves and 4-20mA level sensor or High/Low Level Switches. This combination package is ideal for filling any kind of tank that requires filling to a level setpoint, drawing down the tank level to a secondary setpoint and activating the...
Singer Valve - Model 106 / 206-2PR-SC-BT - Dual Adjustable Set Point Pressure Reducing Valve Using Solenoid Control

The 106 2PR-SC-BT and 206 2PR-SC-BT dual adjustable set point pressure reducing valve using solenoid control is based on the 106-PG or 206-PG valve. The valve is installed with two PR pressure reducing pilots, one set to low pressure, the other to high pressure. The pilot senses the downstream pressure through a connection to the valve outlet. Under flowing conditions,...
Pilots & Accessories

Singer Pilots & Accessories enhance the performance of Singer Automatic Control Valves to meet the most complex of application requirements.
Singer Valve - Model PR-160 - Pressure Reducing Pilot (Normally Open Pilot)

The 160 Pressure Reducing Pilot is a spring and diaphragm operated, normally open pilot. The inner valve is held open by the spring and when the control pressure below the diaphragm exceeds the force of the spring, the pilot valve closes. Model 160 is the standard pressure reducing pilot on all 106 and 206 series valves.
Singer Valve - Model 160-RF - Rate of Flow Control Valve

The 160-RF pilot is a spring and diaphragm operated pilot designed to sense a differential across an external orifice plate. It is a normally open pilot that also has a sensing port is in the spring casing, above the diaphragm and is available in stainless steel. The inner valve is held open by the spring and when the control pressure below the diaphragm exceeds the combined forces of the spring and the...
Singer Valve - Model 81-RP - Pressure Relief Pilot (Normally Closed Pilot)

The 81-RP is a remote sensing, high capacity, spring and diaphragm operated, normally closed pilot. The inner valve is held closed by the spring. When the sensed pressure increases above the spring setting, the pilot opens. Model 81-RP pilot is used as the standard pressure relief/sustaining pilot on all 106 and 206 series valves.
Singer Valve - Model 83-RP - High Pressure Relief Pilot

The 83-RP is a spring and diaphragm operated, normally closed pilot specifically designed for high pressure applications. The inner valve is held closed by the spring. When the control sensed pressure below the diaphragm exceeds the force of the spring, the pilot valve opens. Model 83-RP pilot is used as the standard pressure relief pilot where the operating pressures are excessive, such as a 300 psi /...
Singer Valve - Model 81-RPD - Differential Pressure Relief Pilot

The 81-RPD is a remote sensing, high capacity, spring and diaphragm operated, normally closed, differential pilot. The inner valve is held closed by the spring. When the pressure under the diaphragm overcomes the combined forces of the spring setting and the pressure above the diaphragm, the pilot opens. The 81-RPD valve is used for remote sensing of a differential pressure for normally closed applications.
Singer Valve - Model 301-4 - Altitude Pilot Valve

An altitude pilot valve that is spring and diaphragm operated; it controls the water level in a reservoir by sensing the hydrostatic head. When the hydrostatic head equals the spring force, the pilot connects port “X” (connection to main valve inlet ) to port “K” (connection to main valve bonnet). The main valve closes. When the hydrostatic pressure decreases slightly, the port “X to K” connection is closed by...
Singer Valve - Model R-400 - Modulating Float Pilot

The R-400 is a modulating float pilot with a plastic float, suitable for remote installation on a tank or reservoir. It positions the main valve in proportion to the reservoir level. Standard configuration is for the pilot to close on rising level. Specify “Reverse Acting” for the pilot to open on rising level. The polypropylene float connects to the pilot on a 10 in / 250 mm brass rod. The...
Singer Valve - Model 34 - Modulating Float Pilot with Vertical Rod

The 34 modulating float pilot is comprised of a copper float and brass rod assembly which moves vertically. As the level rises, the float lifts and the valve closes. The 34 pilot is optional pilot, available for modulating applications where the float and rod are installed in a still well and / or vertical action is preferred.
Singer Valve - Model 35 - Modulating Float Pilot

Model 35 is a Stainless Steel modulating float pilot with a Stainless Steel fl oat, suitable for remote installation on a tank or reservoir. It positions the main valve in proportion to the Reservoir level. Standard configuration is for the pilot to close on rising level. Specify Reverse Acting for the pilot to open on rising level. The Stainless Steel float connects...
Singer Valve - Model 39 - Non-Modulating Float Pilot with Vertical Rod

The 39 non-modulating float pilot is designed to operate an On-Off float valve. The differential between the level where the valve opens and the level where the valve closes, is adjustable. The standard configuration is for the pilot valve to close on high level and open at a low level. The 39 pilot is used as the standard pilot on all non-modulating F-Type 5, 106 and 206 series float...
Singer Valve - Model 43 - Rotary Float Pilot (On/Off)

The 43 stainless steel float actuated pilot with non-modulating rotary motion, provides non-modulating On-Off operation of the main valve. It has higher capacity and faster response time than other non-modulating float pilots. The differential between the level where the main valve opens and the...
Singer Valve - Model 106-RD - Differential Relief Pilot

The model 106-RD is a spring and diaphragm operated, normally closed pilot designed to allow flow when the inlet pressure exceeds the outlet pressure by a predetermined amount. The model 106-RD is used as a differential control valve on Singer model 106-A-Type 4 altitude control valves.
Singer Valve - Model 625-RPD - Differential Pilot

The model 625-RPD is a remote sensing, spring and diaphragm operated, normally closed pilot with large diaphragm area for increased sensitivity. The pilot opens when the control pressure exceeds the spring force or the differential established by the spring. The model 625 is used for special applications where a low pressure set point or highly sensitive and responsive pilot is required.
Singer Valve - Model 82-PR - Pressure Reducing Pilot

The model 82-PR is a spring and diaphragm operated, normally open pilot valve, with the sensing chamber(s) separated from the operating chambers. It closes when the control pressure below the diaphragm exceeds the force of the spring. The model 82-PR is used as the standard low pressure pilot on model RPS-L&H anticipating surge valves.
Singer Valve - Tubing

All Singer valves are fitted with Copper tubing as standard. There are optional upgrades to Stainless Steel or Stainless Steel braided hose available.
Singer Valve - Model 26 - Flow Stabilizer (Opening Sped Control)

The 26 flow stabilizer is a self-cleaning, opening speed control. It is used in conjunction with a fixed restriction orifice that is usually threaded into port 3. The 26 stabilizer allows free flow down to the bonnet (port 1) and restricts flow up from port 1. The 26 stabilizer is used as the standard flow stabilizer (opening speed control) on model 106-PR or 206-PR pressure reducing valves or any other...
Singer Valve - Fixed Restriction

The fixed restriction is a 303 stainless steel bodied fitting with a stainless steel orifice plug. The fixed restriction controls the flow rate in the pilot system. The orifices are sized to provide the proper control to a select series of valve sizes only. This all stainless steel version replaces all previous versions of the brass body, with stainless steel...
Singer Valve - Model J0074A - Micrometer Needle Valve

Micrometer needle valves allow for precise speed control. There is virtually infinite flow adjustment in both directions. Standard end connections are female-to-female 1/4 in / 7.5 mm NPT. Standard Materials: Forged brass body, Buna-N seals and stainless steel stem.
Singer Valve - Model 852-B - Needle Valve Speed Control

The 852-B needle valve is a pilot speed control valve. The body is brass and the stem is stainless steel with a fine thread for controlling flow. O ring packing assures leak proof, trouble free service. 1/4 in / 7.5 mm NPT female to female end connections.
Singer Valve - Model J0053A - Micrometer Flow Control Valve

Micrometer flow control valves allow for precise flow control. There is full flow in one direction and adjustable restricted flow in the opposite direction. They are standard on certain models, such as BPC pump control valves and available as an option for other applications. Standard end connections are female-to-female 1/4 in / 6.35 mm NPT.
Singer Valve - Model 10 & 12 - Pilot Check Valves

The 10 pilot check valve is standard on all 106 and 206 series valves requiring a pilot check function such as BPC, PR-C, RPS-C types. It is designed to require a low “cracking” differential pressure to open. The 12 has a higher “cracking” pressure and requires more differential pressure to open.
Singer Valve - Model 167 - Proportional Pilot

The 167 Proportional Pilot is a direct acting diaphragm operated pressure reducing valve. The valve is held open by the lower diaphragm, opposes the force of the upper diaphragm to close the valve.
Singer Valve - Model J0223A - Building Trades Pilot

Compact design, corrosion resistant construction. Brass body with brass bonnet. Miniature brass 1/8', 1/4' PTF. Brass bonnet equipped with pressure adjusting screw. Indoor applications only. For use on 3' pressure reducing valves & smaller.
Singer Valve - Model J0098B & J0097B - Strainers

There are two versions of the standard AISI 316 stainless steel strainer with 40 mesh stainless steel screens. The standard strainer J0098B has a 3/8 in / 9.5 mm blowdown/maintenance port for access to the screen and the 3/8 in / 10 mm NPT inlet and outlet connections. The J0097B strainer provides a standard 1/4 in / 6.35 mm sensing / gauge connection.
Fire Protection - Pressure Reducing
Singer Valve - Model 106-PR-8702A - ULC Pressure Reducing Valve

The 106-PR-8702A, which is ULC labelled and listed, is ideal for automatically reducing a higher inlet pressure to a steady lower discharge pressure, regardless of fluctuations in flow or inlet pressure. The valves are based on the 106-PG or A106PG control valves and are available in a complete range of sizes from 1 in / 25 mm to 8 in / 200 mm. In typical pressure reducing...

Contact supplier

Loading... Drop file here or browse Great, file uploaded. Change File Drop file here or browse

Yes, please send to similar suppliers.