Munters

75 products found

Munters Products

  • Mist Eliminators

    Munters supplies solutions and services to over 20 industries in the world. Munters mist elimination systems are virtually everywhere there are liquids and gases that need to be separated.

  • Munters - Model DH Series - Vane-Type Mist Eliminators

    Munters - Model DH Series - Vane-Type Mist Eliminators

    DH Series droplet separators when assembled into units form a vane type separator for horizontal flow. The streamlined profiles ensure low levels of pressure drop combined with high separation efficiencies. The profile is available in various materials, the most popular being, talcum reinforced polypropylene, but also aluminum. It can therefore be utilized under different operating conditions.

  • Munters - Model C-Pack - Cold Side Packs for Regenerative Gas-Gas Heater Systems

    Munters - Model C-Pack - Cold Side Packs for Regenerative Gas-Gas Heater Systems

    The reheating of treated flue gases from the scrubbing tower, before discharge to the stack, plays a vital role in the operating costs of flue gas desulphurisation plants (FGD) working on wet processes. The operating conditions in FGD plants are generally highly corrosive and have a high scaling tendency, which could cause high maintenance and replacement costs of the GGH or parts of them. Depending on the operating conditions of the FGD and the GGH,...

  • Munters - Model DCF - 2 Stage Air Intake System

    Munters - Model DCF - 2 Stage Air Intake System

    DCF is a series of advanced tailor made ready-to-install air intake systems for use in many application areas. They provide excellent protection against all types of droplets as well as particle filtration throughout a broad range of face velocities.

  • Munters - Model DF 2100 - Mist Eliminator

    Munters - Model DF 2100 - Mist Eliminator

    DF 2100 is a ready-to-install droplet separator for use in many application areas. It is available in various material combinations and configurations to fit a wide range of operating conditions. DF 2100 droplet separator provides high efficiency droplet separation and low pressure drop, even at high face velocity, for energy saving operation. The droplet separator can be configured to most individual performance and installation situations,...

  • Munters - Model DF 2500 - Mist Eliminator

    Munters - Model DF 2500 - Mist Eliminator

    DF 2500 is a ready-to-install droplet separator for use in many application areas. It is available in various material combinations and configurations to fit a wide range of operating conditions. DF 2500 droplet separator provides high efficiency droplet separation and low pressure drop, even at high face velocity, for energy saving operation. The droplet separator can be configured to most individual performance and installation situations, providing...

  • Munters - Model DF 3500 - Mist Eliminator

    Munters - Model DF 3500 - Mist Eliminator

    DF 3500 is a ready-to-install droplet separator for use as air intakes in marine and offshore applications. It is available in various material combinations and configurations to fit a wide range of operating conditions. DF 3500 droplet separator provides high efficiency droplet separation and low pressure drop even at high face velocity. The droplet separator can be configured to most individual performance and installation situations, providing...

  • Munters - Model DF 3800 - Mist Eliminator

    Munters - Model DF 3800 - Mist Eliminator

    DF 3800 is a ready-to-install droplet separator for use in many application areas. It is available in stainless steel and aluminium combinations and configurations to fit a wide range of operating conditions. DF 3800 droplet separator provides high efficiency droplet separation and extreme low pressure drop even at medium face velocities giving energy saving operation. The droplet separator can be configured to most individual performance and...

  • Munters - Model DF 4800 - Mist Eliminator

    Munters - Model DF 4800 - Mist Eliminator

    DF 4800 is a ready-to-install droplet separator for use in many application areas. It is available in stainless steel and aluminum combinations and configurations to fit a wide range of operating conditions. DF 4800 droplet separator provides high efficiency droplet separation and extreme low pressure drop, even at medium face velocities, for energy saving operation.

  • Munters - Model DF 2800 - Mist Eliminator

    Munters - Model DF 2800 - Mist Eliminator

    DF 2800 is a ready-to-install droplet separator for use in many application areas. It is available fit a wide range of operating conditions. DF 2800 droplet separator provides high efficiency droplet separation and extreme low pressure drop even at medium face velocities giving energy saving operation. The droplet separator can be configured to most individual performance and installation situations, providing a cost effective solution. DF 2800...

  • Munters - Model DF 4200 - Mist Eliminator

    Munters - Model DF 4200 - Mist Eliminator

    DF 4200 droplet separator provides high efficiency droplet separation even under harsh operating conditions. The droplet separator can be configured to most individual performance and installation situations, providing a cost effective solution. Alternative material choices and drainage systems, as well as add-on features like flanges and protection mesh are just some of the configuration options. DF 4200 droplet separator is designed for use in many...

  • Munters - Model DF 4300 - Mist Eliminator

    Munters - Model DF 4300 - Mist Eliminator

    DF 4300 droplet separator provides high efficiency droplet separation and low pressure drop even at very high face velocity giving energy saving operation. The droplet separator can be configured to most individual performance and installation situations, providing a cost effective solution. Alternative material choices and drainage systems, as well as add-on features like flanges and protection mesh are just some of the configuration options.

  • Munters - Model DFF - 3 Stage Air Intake System

    Munters - Model DFF - 3 Stage Air Intake System

    DFF is a series of ready to install, tailor made, three stage air intake systems for use in special application areas. The DFF series not only provides excellent protection against all types of droplets but also filters particles at high air velocities. DFF has been designed for the supply air in marine propulsion systems and auxiliary equipment and for the provision of clean air for ventilation in marine and offshore environments. Harmful salts...

  • Munters - Model DFH - Anti Icing and Anti Snow Air Intake System

    Munters - Model DFH - Anti Icing and Anti Snow Air Intake System

    DFH is a ready-to-install snow and droplet separator for use as an air intake in cold climates. The unit provides protection against all sorts of snow particles and rain, hence it prevents the intake from getting plugged with ice. DFH is typically used in cold climates, with snowfall, hail, drifting snow particles and high relative humidity. DFH separator is available in aluminum and stainless steel alloys and thus fits a wide range of applications....

  • Munters - Model DH 2100 - Droplet Separator Profile

    Munters - Model DH 2100 - Droplet Separator Profile

    DH™ 2100 droplet separator profile when assembled into units forms a vane type separator for horizontal flow specially design for the heating, ventilation and air conditioning applications. The streamlined profiles ensure low levels of pressure drop combined with high separation efficiencies. The profile is available in various materials, the most popular being, talcum reinforced polypropylene, PVC, PVDF, aluminium and stainless steel....

  • Munters - Model DH 2100-FGD - Mist Eliminator for FGD

    Munters - Model DH 2100-FGD - Mist Eliminator for FGD

    The DH 2100-FGD (T 100) is a vane type droplet separator for horizontal gas flow. The DH2100-FGD with the panel design was first used in horizontal downstream ducts of FGD absorber towers. Most of the times an automated cleaning system is installed. This not only increases the lifetime of the entire system it also decreases the maintenance to a minimum. The gas flow charged with liquid droplets is directed through...

  • Munters - Model DH 2500 - Droplet Separator Profile

    Munters - Model DH 2500 - Droplet Separator Profile

    DH 2500 droplet separator profile when assembled into units forms a vane type separator for horizontal flow design for the HVAC applications, especially for the installation behind cooling coils. The streamlined profiles ensure low levels of pressure drop combined with high separation efficiencies. The profile is available in various materials, the most popular being, talcum reinforced polypropylene, but also aluminium. It can therefore...

  • Munters - Model DH 4200 - Droplet Separator Profile

    Munters - Model DH 4200 - Droplet Separator Profile

    DH™ 4200 droplet separator profile when assembled into units forms a vane type separator for horizontal flow specially design for the heating, ventilation and air conditioning applications. The streamlined profiles with multiple bends ensure high liquid loads combined with high separation efficiencies. The profile is produced in talcum reinforced polypropylene. It can therefore be utilised in a wide range of processes under different...

  • Munters - Model DH 4300 - Droplet Separator Profile

    Munters - Model DH 4300 - Droplet Separator Profile

    DH 4300 droplet separator profile when assembled into units forms a vane type separator for horizontal flow. The streamlined profiles with multiple bends ensure high liquid loads combined with high separation efficiencies. The profile is produced in talcum rein-forced polypropylene. It can therefore be utilised in a wide range of processes under different operating conditions. DH 4300 droplet separator profile can be supplied as standard 5 metre long...

  • Munters - Model DH 5000 - Mist Eliminator

    Munters - Model DH 5000 - Mist Eliminator

    The DH 5000 (TS-5 series) droplet separator is a vane type separator for horizontal flow. The gas flow charged with liquid droplets is directed through eliminator chambers which are designed for maximum effect on the gas flow. As a result of this configuration, inertial forces act on the droplets. The droplets impinge onto the profiles, where they form a liquid film which is subsequently drained off as a result of gravity. Specially shaped separating...

  • Munters - Model DMV - Wire Mesh Separator & Agglomerator

    Munters - Model DMV - Wire Mesh Separator & Agglomerator

    Munters DMV-series is well suited for a special range of liquid gas processing applications, particularly where the flow velocity is related to mass transfer. Typical applications (as separator DMV-S) Vertical columns with mass transfer service Small diameter towers Typical applications (as agglomerator DMV-A) Liquid sulphur removal Compressor protection Sulphuric acid plants LNG plants / Ammonia plants.

  • Munters - Model DPV - Double Pocket Vane Type Separator

    Munters - Model DPV - Double Pocket Vane Type Separator

    Munters DPV is a double pocket type vane type separator for service in high velocity and high liquid removal applications. It is part of Munters series of high performance vane type separators (DH5000 and DPV) with elevated K-values. Specially designed drain channels collect the liquid which flows away under the influence of gravity. So-called double pocket vane type separators drain the captured liquid inside separate making it impossible for the...

  • Munters - Model DS 8000 - Spin Vane Separator

    Munters - Model DS 8000 - Spin Vane Separator

    DS 8000 is a series of spin vane separators removing droplets for both vertical and horizontal gas flow. The equipment has especially been designed for separating larger amounts of coarse droplets at higher gas velocities from the gas stream. A ring of spin vanes set the gas flow in rotation. As a result, the liquid droplets are spun outwards, impinging on the separator wall and are subsequently drained off in an annular compartment. The liquid then...

  • Munters - Model DV 270 - Mist Eliminator

    Munters - Model DV 270 - Mist Eliminator

    The DV 270 (T 271) droplet separator is a vane type separator for vertical flow. The gas flow charged with liquid droplets is directed through separator chambers which are designed for maximum effect on the gas flow. As a result of this configuration, inertial forces act on the droplets. The droplets impinge onto the profiles, where they form a liquid film which is subsequently drained off as a result of gravity. V-shaped impressions on the separator...

  • Munters - Model DV 880 - Mist Eliminator

    Munters - Model DV 880 - Mist Eliminator

    The streamlined separator profiles deflect the droplet laden gas stream; as a result the momentum of the droplets causes them to impinge onto the profile surface. The droplets coalesce together and form a liquid film, draining back down under the influence of gravity. Target applications FGD absorbers (Flue Gas Desulphurization) Vertical gas scrubbers Gas cleaning devices in waste incineration plants.

  • Munters - Model DV210+ Series - Mist Eliminator Systems for FGD

    Munters - Model DV210+ Series - Mist Eliminator Systems for FGD

    One single stage or 2 superposed V shaped units on 2 support layers. Flushing systems are installed on either up- and/ or downstream side of the mist eliminators. Target applications are Flue gas desulphurization plants for processes with high turn down ratios, Exhaust air treatment plants, Waste Incineration plants and Inlet and exhaust scrubbers with high cleaning requirements. Available in material; PPTV, PPHT, PP, FRP, PPGC, PSU and Stainless...

  • Munters - Model DV210RF - 2 Stage Mist Eliminator System

    Munters - Model DV210RF - 2 Stage Mist Eliminator System

    The system is typically installed in gas cleaning devices such as flue gas desulphurization absorbers and wet scrubbers. DV210 RF has several functions such as the protection of the downstream gas-gas heat exchanger (GGH) from droplets, the best available elimination of liquid carry-over escaping into the environment and finally the highest retention of liquid solvent avoiding losses during operation.

  • Munters - EasyFlow Flow Optimization Module

    Munters - EasyFlow Flow Optimization Module

    Munters Easy Flow enables to master critical process conditions where there is either a high solid content in the gas thus a high risk of clogging or where there is a very high variance in the flow conditions leading to local malfunctions in the separation. This innovative technology concept increases the service life of coarse and fine separators in gas cleaning devices and equalizes uneven gas flow to ensure smoother process operations. The design...

  • Munters - Model FastFlow - High Velocity Flow Module

    Munters - Model FastFlow - High Velocity Flow Module

    Two superposed units forming a diamond structure. Process designers have the possibility to extract two benefits from the configuration. First the system requires a single layer of support beams instead of two. Second, the total system height is maximum 2.6 m. Comparing the total required installation height of Design I and III the absorber height can be reduced up to 600mm without reducing any comfortable access to the stages for cleaning...

  • Munters - Model IDM - Inlet Device

    Munters - Model IDM - Inlet Device

    Munters IDM is an advanced type of inlet distributor that is commonly used for introducing gas/liquid mixtures into a vessel or a column. It removes liquid slugs and optimizes the downstream gas flow. The liquid removal capacity of the IDM is very high, with an efficiency of around 90%. It is designed to handle very large liquid fractions and slugs, yet it has a low pressure drop and a very high resistance to fouling. Typical uses for the IDM type...

  • Munters - Model Ultra-Flow - 3-Stage Mist Eliminator System

    Munters - Model Ultra-Flow - 3-Stage Mist Eliminator System

    Munters´ Ultra-Flow is a 3-stage vane type separator system for vertical gas flows with an integrated online cleaning system. Ultra-Flow has been designed as modular system to enable easy maintenance. A brand-new design with drainage system is developed for Ultra-Flow to remove liquid easily out of the gas flow. This profile enables robust operation and reduced installation downtime without the risk of reaching the flooding condition. Due...

  • Munters - Model DRIFdek-IL - Drift Eliminators

    Munters - Model DRIFdek-IL - Drift Eliminators

    DRIFdek-IL modular interlocking drift eliminators offer easy installation, self sealing design and excellent droplet separation. The overlapping design makes installation fast and watertight. No caulking or weather stripping is needed between the modules.

  • Pollution Control & VOC Abatement

    Munters' mist elimination, Zeolite VOC abatement, and air pollution control systems provide efficient and effective solutions for removing liquid and solvents from the air. The air pollution control products and VOC abatement equipment can help you reduce the amount of contaminants in the air.

  • Munters - Zeolite Rotor Concentrator/Oxidizer System for VOC Abatement

    Munters - Zeolite Rotor Concentrator/Oxidizer System for VOC Abatement

    Munters Zeolite Rotor Concentrator/Oxidizer Systems are the leading technology for cost-effective abatement of VOCs (VOC abatement). With hundreds of systems currently in service, Munters installed base includes some of the world's most respected companies in semiconductor manufacturing, automotive and aerospace industries. Munters Zeolite Concentrators/Oxidizer can achieve destruction and removal efficiencies up to 99%.

  • Munters - Model ML1350 - Industrial Desiccant Dehumidifier

    Munters - Model ML1350 - Industrial Desiccant Dehumidifier

    The ML1350 desiccant dehumidifier is designed to efficiently dehumidify in low moisture applications. Features include an internally sealed rotor unit, corrosion-resistant casing design, providing a precise balance for dehumidification, reactivation, and heat recovery airflows. The durable Aluzink® frame and access panels are ergonomically designed, allowing simple installation and maintenance.

  • Munters - MAC Air Cleaner

    Munters - MAC Air Cleaner

    Ammonia is a natural residual product from livestock production and because of environmental regulations many farmers are facing limits for ammonia emission – especially when they increase their animal production. In order to make it possible for farmers to enlarge their production in areas with ammonia restrictions, Munters has developed air cleaners.

  • Munters - VOC Concentrator with Multiple Zeolite Rotor System

    Munters - VOC Concentrator with Multiple Zeolite Rotor System

    For large process exhaust flows, Munters manufactures concentrator equipment with zeolite rotors arranged in parallel.  Single concentrator boxes can be shipped to treat exhaust streams as large as 100,000 cfm (160,000 m3/hr). The concentrated air from each rotor is combined into one stream and sent to a common oxidizer for VOC destruction.  Additional concentrator boxes can be added as needed to treat even larger flow volumes.

  • Munters - Zeolite Rotor VOC Concentrator with Desorption Heater

    Munters - Zeolite Rotor VOC Concentrator with Desorption Heater

    Munters zeolite rotor concentrator is integrated with a direct gas-fired air heater to provide the necessary heat for rotor regeneration.  Solvent laden air is drawn through the zeolite rotor concentrator where the VOCs are removed by adsorption.  The rotor turns continuously transporting VOC laden zeolite into a regeneration zone where heater air is used to desorb the VOCs forming a highly concentrated airstream.  The system is...

  • Munters - Zeolite Rotor VOC Concentrator with RTO

    Munters - Zeolite Rotor VOC Concentrator with RTO

    The most fuel efficient configuration is to integrate Zeolite rotor concentrators with a Regenerative Thermal Oxidizer (RTO) for VOC destruction. Dual Chamber RTOs with 95% primary heat recovery and flameless Natural Gas Injection (NGI) can operate autothermally with highly concentrated VOC streams from concentrators. High airflow applications such as automotive and aerospace finishing take advantage of the minimal fuel requirements of this...

  • Munters Humimax - Zeolite Rotor VOC Concentrator with Thermal Oxidizer

    Munters Humimax - Zeolite Rotor VOC Concentrator with Thermal Oxidizer

    Munters Zeolite Rotor Concentrator is fully integrated with a recuperative thermal oxidizer for VOC destruction. Solvent laden air is drawn through the Zeolite Rotor Concentrator where the VOCs are removed by adsorption. The rotor turns continuously transporting VOC laden Zeolite into an isolated regeneration zone where heated air is used to desorb the VOCs. The desorbate, a highly concentrated airstream typically 5-10% of the...

  • Munters - Zeolite Rotors

    Munters - Zeolite Rotors

    The technology behind Munters' VOC technology is our Zeolite rotor.  The rotor is made up of hydrophobic zeolite which is an inorganic crystal with properties suited to adsorbing VOCs. Hydrophobic zeolite is a stable crystal. The zeolite's inert properties mean that it does not promote chemical reactions. It is also non-flammable to extreme temperatures and will not react with strong acids.

  • Combined Temperature & Humidity Control

    Manufactures often require the ability to control temperature and humidity independently Munters’ air treatment systems are designed to cost-effectively provide humidity control on an as-needed basis, whilst maintaining desired operating and supply temperatures.

  • Munters - Model ML Plus - Compact Standardised Standalone Dehumidification System

    Munters - Model ML Plus - Compact Standardised Standalone Dehumidification System

    Built up by standard modules the ML Plus concept is a compact standardised standalone dehumidification system with incorporated temperature  and humidity control. Our  ML Plus-system can be configured with booster fan, humidifier, pre- and post coolers and heaters according to your requirements. The ML Plus system is built up in elements, assembled and tested at our factory - ready for immediate start up on site.

  • Dehumidifiers for Industrial and Commercial Use

    Munters offers robust and quality industrial and commercial desiccant dehumidifier systems for various applications. Our DryCool industrial humidifiers provide humidity control to meet your industry's specific requirements.

  • ComDry - Model M160L - Desiccant Dehumidifier

    ComDry - Model M160L - Desiccant Dehumidifier

    The ComDry series is a range of desiccant dehumidifiers with high drying capacity, reliability and low energy consumption. The solid casing is excellent at withstanding corrosion and the dehumidifiers robustness makes it very versatile in a wide range of applications. They are also easy to stack and transport. Munters ComDry series is particularly suited to water and fire damage restoration operations as well as archives, waterworks and the...

  • Munters ComDry - Model M170L - Desiccant Dehumidifier

    Munters ComDry - Model M170L - Desiccant Dehumidifier

    The ComDry series is a range of desiccant dehumidifiers with high drying capacity, reliability and low energy consumption. The solid casing is excellent at withstanding corrosion and the dehumidifiers robustness makes it very versatile in a wide range of applications. They are also easy to stack and transport. Munters ComDry series is particularly suited to water and fire damage restoration operations as well as archives, waterworks and the...

  • Munters ComDry - Model M190Y - Desiccant Dehumidifier

    Munters ComDry - Model M190Y - Desiccant Dehumidifier

    The ComDry series is a range of desiccant dehumidifiers with high drying capacity, reliability and low energy consumption. The solid casing is excellent at withstanding corrosion and the dehumidifiers robustness makes it very versatile in a wide range of applications. They are also easy to stack and transport. Munters ComDry series is particularly suited to water and fire damage restoration operations as well as archives, waterworks and the...

  • ComDry - Model M210X - Desiccant Dehumidifier

    ComDry - Model M210X - Desiccant Dehumidifier

    The ComDry series is a range of desiccant dehumidifiers with high drying capacity, reliability and low energy consumption. The solid casing is excellent at withstanding corrosion and the dehumidifiers robustness makes it very versatile in a wide range of applications. They are also easy to stack and transport. Munters ComDry series is particularly suited to water and fire damage restoration operations as well as archives, waterworks and the...

  • Munters - Model DSS - Desiccant System Solution

    Munters - Model DSS - Desiccant System Solution

    The Desiccant System Solution (DSS) offers a wide variety of material and components to fit most difficult applications for indoor and outdoor installation. A complete DSS system, ready for operation, consists in its standard design of components for the pre & post treatment, dehumidification rotor with reactivation and required fans for process and reactivation air.

  • Munters IceDry - Model 1400 - Dehumidifiers

    Munters IceDry - Model 1400 - Dehumidifiers

    IceDry is the only dehumidifier that has been developed especially for installation inside a cold store. The tough, cold environment demands new and special features created with the sole purpose of ensuring that the unit runs reliably and energy efficient. One example is the automatic defrosting function. Accumulated ice and frost will gradually evaporate until the store is completely free from ice and frost.

  • IceDry - Model 30 - Dehumidifiers

    IceDry - Model 30 - Dehumidifiers

    By installing an IceDry® dehumidifier inside the cold store a frost free cold store can now be a reality. An airlock is no longer needed. When IceDry is installed, accumulated ice and frost will gradually evaporate until the store is completely free from ice and frost. IceDry is the only dehumidifier that has been developed especially for installation inside a cold store. The tough, cold environment demands new and special features created with...

  • Munters - Model M120 - Desiccant Dehumidifier

    Munters - Model M120 - Desiccant Dehumidifier

    The M120 desiccant dehumidifier is designed to efficiently dehumidify air . Its very compact construction incorporates sections held together by four bolts. The sections contain fans that are driven by a common motor, a direct gear driven desiccant rotor, and a reactivation airflow heater. The two end casings contain distribution chambers with isolated sections that provide a precise balance for dehumidification and reactivation airflows. Its rugged...

  • Munters - Model MC150XA - Desiccant Dehumidifiers

    Munters - Model MC150XA - Desiccant Dehumidifiers

    The MC series represents a range of desiccant dehumidifiers with high drying capacity, reliability and flexibility. The solid powder coated Aluzinc casing not only withstands corrosion (class 4) but also makes it versatile for a wide range of applications. The analogue version allows for easy installation and can be equipped with an external humidistat for moisture control and energy saving, mostly for simple storage and preservation applications. For...

  • Mass Transfer

    Munters provides a complete range of mass transfer solutions and equipment typically found within towers/columns at petroleum refining, chemical, petrochemical and fertilizer plants world-wide.

  • Munters - Alumina Balls

    Munters - Alumina Balls

    Alumina Supports have a wide range of surface areas and pore volumes. The supports can be treated for excellent stability at high temperatures to avoid agglomeration/sintering of surface metals. They are appropriate for intermediate pH.

  • Munters - Bed Limiter

    Munters - Bed Limiter

    Bed limiters are safety devices that are available for both random as well structured packing to avoid the expansion of the packed bed, as well as to maintain the bed top surface level.

  • Munters - Collector Tray

    Munters - Collector Tray

    This deck type liquid collector is versatile and can be used in all towers. Liquid volume and residence time are controlled by utilizing tall risers on the tray deck. Sumps can be added on one side, both sides, or across the center to facilitate liquid with drawal. This collector can provide 25 to 40% open area. Mid-span support beams are required in large columns > 2000mm (78 inches) ID. The deck and optional sump(s) rest on a ledge/tray support...

  • Munters - Feed Devices

    Munters - Feed Devices

    Different Feed devices are available for various feed conditions of the fluid entering the column such as only liquid feed, mixed feed or gaseous feed. Feed devices are selected to complement with the type of Distributor used to give the optimum performance.

  • Munters - Grid Packing

    Munters - Grid Packing

    Grid Packing are recommended for applications with fouling, coking and solid contents. The Grid Packing has robust mechanical structure, fabricated in modules for ease of installation and cleaning.

  • Munters KEVIN - Model ME-II - Structured Packing

    Munters KEVIN - Model ME-II - Structured Packing

    ME-II Structured Packing, is an efficient and economical structured packing that is widely used in the industry today. ME-II Structured Packing has all the desirable characteristics like predictable throughput, low pressure drop, good efficiency and flexibility; which plays vital role in separations. ME-II Structured packing is available in an array of surface areas (corrugation crimp sizes) & we can also provide intermediate sizes to suit a...

  • Munters KEVIN - Vantage Additional Series Structured Packing

    Munters KEVIN - Vantage Additional Series Structured Packing

    Vantage Series structured packing sheets have innumerable fine perforations (pierced but not punched holes) throughout the surface. This is a distinct advantage over other structured packings that have punched holes resulting in loss of valuable surface area that in turn reduces the potential efficiency of the product. It is available in same sizes as regular ME-II structured packing.

  • Munters - Liquid - Liquid Extraction Internals

    Munters - Liquid - Liquid Extraction Internals

    Liquid-Liquid Extraction is a Separation process in which a feed stream containing dissolved components is contacted with an immiscible solvent which forms a second liquid phase and selectively extracts the dissolved components from the feed. It is primarily used for services where distillation is not practical, like close boiling point or heat sensitive materials.

  • Climate Controllers for Agriculture

    Control and Management Solutions for the Poultry, Swine and Aquaculture Industries.

  • Munters - Ammonia Sensor

    Munters - Ammonia Sensor

    This unique product allows for continuous, long term ammonia measurement. The sensor works with the Platinum or AC-2000 3G Controllers, delivering a constant signal via a 0 - 10V output, providing real time data.

  • Munters - CO2 Sensor

    Munters - CO2 Sensor

    TheCO2 Sensorcontinuously measures CO2 levels in an agricultural environment. Just connect the sensor to a controller and ventilation is triggered when the measured CO2 level fall outside the user-determined parameters. The CO2 Sensor requires little or no maintenance. Range: 0 - 5000 PPM. Accurate to +/- 3%. Data is transmitted using a 4 - 20 mA output.

  • Coolers & Humidifiers

    Munters is a global leader in evaporative cooling solutions for numerous applications. These solutions include Direct Evaporative Coolers, where water is evaporated into the air stream via an engineered pad, CELdek®, to provide adiabatic cooling. Indirect Evaporative Coolers use evaporating water to cool the scavenger airstream passing through a…

  • Munters - Model CELdek - Evaporative Cooling Pad

    Munters - Model CELdek - Evaporative Cooling Pad

    CELdek evaporative cooling pads are designed to provide maximum cooling, low pressure drop and years of reliable service. It is made from specifically engineered cellulose paper that is chemically treated to resist deterioration and meets the UL Environmental GREENGUARD GOLD certifications emission standards, improving the indoor air quality for both humans and livestock.

  • Munters CELdek - Model 7060-15 - Evaporative Cooling Pad

    Munters CELdek - Model 7060-15 - Evaporative Cooling Pad

    CELdek Series evaporative cooling pad is used in systems where high efficiency cooling is required. It can be used for many different cooling purposes but is particularly suitable for cooling of livestock buildings and greenhouses when higher air velocity is required. The green stripe pad consists of specially impregnated and corrugated cellulose paper sheets with different flute angles, that have been bonded together. This unique design yields a...

  • CELdek - Model 7090-15 - Evaporative Cooling Pad

    CELdek - Model 7090-15 - Evaporative Cooling Pad

    CELdek Series evaporative cooling pad is used in systems where high efficiency cooling is required. It can be used for many different cooling purposes but is particularly suitable for cooling of livestock buildings and greenhouses when higher air velocity is required. The green stripe pad consists of specially impregnated and corrugated cellulose paper sheets with different flute angles, that have been bonded together. This unique design yields a...

  • Munters - Model EPCC - Evaporative Precoolers Condenser

    Munters - Model EPCC - Evaporative Precoolers Condenser

    Munters Evaporative Precoolers for Chiller/Condenser (EPCC) are typically a recirculation (water) type evaporative cooler with make up water via solenoid and ball float, recirculating submersible pump, manual water bleed off (auto as an option) and a Dump valve. Air passes through wetted CELdek® rigid evaporative media, the ambient air temperature is lowered before it reaches the condenser coil. This enables increased capacities to be gained from...

  • EXTRUdek - Model 150 - Water Distribution System

    EXTRUdek - Model 150 - Water Distribution System

    The EXTRUdek water distribution system from Munters provides highly durable means of mounting 150mm thick CELdek® evaporative cooling pads and supplying water to the pads. Together these form an ideal complete system for incorporating evaporative cooling into the ventilation system of a structure. Corrosion of metal parts is a frequent problem amongst gutters used to mount evaporative cooling pads. This leads to frequent leaks and a short life...

  • Munters - Model GX40 - Evaporative Cooling Media

    Munters - Model GX40 - Evaporative Cooling Media

    GLASdek® GX40 is a high efficiency evaporative cooling media that is engineered to provide maximum cooling and humidification, low pressure drop and years of reliable service. The media is made from inorganic, non-combustible material. It allows the use of water straight from the tap with no need for water treatment (i.e. demineralisation plants). In cases with non-sufficient water quality, it may be necessary to add a water treatment. No silver...

  • Fans & Light Traps

    Munters portfolio of ventilators and fans comprises extraction and circulation fans. In climate control and ventilation for the livestock and horticulture industry, extraction fans are used to pull fresh air from outside into the barn or greenhouse. Having adequate light control enables a grower to reap benefits by achieving excellent production…

  • Munters - Model Breeze - High Volume Low Speed Fan

    Munters - Model Breeze - High Volume Low Speed Fan

    The Breeze Fan is a High Volume Low Speed fan, engineered to circulate a vast amount of air, providing the most efficient air circulation movement for animal housing. The Breeze Fan works on a simple principle – creates slow, gentle breezes to lower the effective temperature during warm periods and to circulate the rising warm air downward to ground level during cold periods. In addition, the Breeze Fan will reduce humidity, moisture,...

  • Munters - Model EC52D AGS - Direct Drive Fan

    Munters - Model EC52D AGS - Direct Drive Fan

    EC52D delivers a large amount of air, maintaining reliability and energy efficiency, with an extremely smooth noise emission. The direct drive motor is a maintenance-free solution for the ventilation system, as there is no longer need to verify the integrity of the transmission components: v-belts, pulleys etc. The patented Anti-Gravity, the innovative opening system based on a “counter phase” movements of the shutter blades, guarantees...

  • Munters - Model ED24HE MPX - Exhaust Fans

    Munters - Model ED24HE MPX - Exhaust Fans

    The ambition of Munters is to achieve sustainable solutions that provide both environmental and economic benefits for its customers, and so, driven by the European ErP Ecodesign Directive 2009/125/EC, we have introduced the new Euroemme® EDHE MPX exhaust fans series. The EDHE MPX fan series belongs to the new generation of high energy efficient, very robust and reliable exhaust fans range, suitable for an extensive variety of professional...

  • Model ED30HE - Exhaust Fan

    Model ED30HE - Exhaust Fan

    The ED30HE fan belongs to the new generation of high energy efficient, very robust and reliable exhaust fans range, suitable for an extensive variety of professional applications in order to create optimal climate control system. The ED30HE exhaust box fan has a direct drive system, with the 3-blade propeller statically and dynamically balanced attached onto the electric motors shaft. The shutter blades are installed on the outlet side, and the whole...

  • Heaters

    Munters offers both direct and indirect fired heaters all with a very high thermal efficiency. Munters air heaters are designed for cost effective heating solutions suitable for a wide range of applications, especially livestock farming and greenhouses where highly corrosive gases and high humidity levels are present. Our heater range operates…

  • Munters - Model GA30 - Hanging Air Heater - Heating Power 36 kW

    Munters - Model GA30 - Hanging Air Heater - Heating Power 36 kW

    The GA Air Heaters are designed for cost effective heating solutions in a wide variety of applications, including greenhouses, poultry houses and other livestock structures. All models function on the principle of direct fired gas heating. Hereby a powerful fan is used to force air through a combustion chamber where the burner is situated. As the air passes through the burner, all the heat released by the combustion process is transferred to the air...

  • Munters - Model GA95t - Hanging Air Heater - Heating Power 97 kW

    Munters - Model GA95t - Hanging Air Heater - Heating Power 97 kW

    The GA Air Heaters are designed for cost effective heating solutions in a wide variety of applications, including greenhouses, poultry houses and other livestock structures. All models function on the principle of direct fired gas heating. Hereby a powerful fan is used to force air through a combustion chamber where the burner is situated. As the air passes through the burner, all the heat released by the combustion process is transferred to the air...

  • Munters VariMax - Once-Through Heater (OTH)

    Munters VariMax - Once-Through Heater (OTH)

    The VariMax™ OTH (Once-Through Heater) is a high efficiency, industrial, indirect-fired gas heater used to heat process air streams without contaminating the air with the products of combustion. The OTH is well-suited for recirculating ovens, dryers, makeup-air applications in cold environments, and industrial processes with moderate temperature rises. The counterflow configuration, four-pass design and optimized, secondary, tubular...