Myron L Company Industries

Water and Wastewater - Swimming Pools
Pool Water Testing / Spa Water Testing

Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facilities operators must be familiar with all laws, regulations, and guidelines governing what these parameters should be.
Chemical Water Treatment
Oxidation Reduction Potential (ORP)/Redox

Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.
Water Treatment
Reverse Osmosis Water Testing

Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important...
Water Monitoring and Testing
Hand-Held & Process Control Water Testing Instrument for Deionized Water Testing Industry

Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.
Energy
Hand-Held & Process Control Water Testing Instrument for Boilers and Cooling Towers

Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level...
Water and Wastewater
Hand-Held & Process Control Water Testing Instrument for Environmental Industry

Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...
Hand-Held & Process Control Water Testing Instrument for Fountain Solutions

Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriate...
Water Testing for Automatic Rinse Tank Controls

Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors...
Textile
Water Testing for Textile Manufacturing

The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated...
Electronics and Computers
Hand-Held & Process Control Water Testing Instrument for Circuit Board Cleanliness Testing Industry

Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

Contact supplier

Loading... Drop file here or browse Great, file uploaded. Change File Drop file here or browse

Yes, please send to similar suppliers.

Myron L Company Industries

Water and Wastewater - Swimming Pools

Pool Water Testing / Spa Water Testing

Chemical Water Treatment

Oxidation Reduction Potential (ORP)/Redox

Water Treatment

Reverse Osmosis Water Testing

Water Monitoring and Testing

Hand-Held & Process Control Water Testing Instrument for Deionized Water Testing Industry

Energy

Hand-Held & Process Control Water Testing Instrument for Boilers and Cooling Towers

Water and Wastewater

Hand-Held & Process Control Water Testing Instrument for Environmental Industry

Hand-Held & Process Control Water Testing Instrument for Fountain Solutions

Water Testing for Automatic Rinse Tank Controls

Textile

Water Testing for Textile Manufacturing

Electronics and Computers

Hand-Held & Process Control Water Testing Instrument for Circuit Board Cleanliness Testing Industry

Industries Served