49 products found
Products by Apex Instruments, Inc.
-
Isokinetic Sampling Systems
-
Model 4 - Sampling Kit
Method 4 Determination of the Moisture Content of Stack Gas Summary: Stack gas is extracted at constant rate (less than 21 lpm) and a minimum volume of 600 liters. Moisture is removed from the sample stream, and volumetrically or gravimetrically measured. All applicable components are rated 110V / ...
-
Model 5 - Sampling Train Kit
The professional source sampling company must be prepared for a wide variety of conditions and locations. Apex recommends the Method 5 System “Deluxe Plus”, which can be used in both rigid and flexible configurations. Even with the classic rigid arrangement, the additional glassware allows you to have pre-measured and filled impingers, pre-weighed filter assemblies, and minimum turnaround time between ...
-
Gas Analyzers
-
Gasmet - Model DX4000 FTIR - Gas Analyzer
Gasmet Technologies is a Finnish high technology company that develops and manufactures the Gasmet line of gas monitoring systems. The first generation of Gasmet gas analyzers were introduced in 1993 and since then the success has continued with a stream of new and innovative products, including the unique Gasmet In ...
-
Wohler - Model A550 - Industrial Flue Gas Analyzer
As tough as cast iron, but as easy to operate as a smartphone – that‘s what Wohler‘s new Flue Gas Emssions Analyzer feels like in your hand. A tap of your finger on the Wohler A 550 INDUSTRIAL is all that is required to perform a complete analysis and inspection of boilers and burners. The Flue Gas Emissions Analyzer is designed to be used in tough industrial heat processes. The in-stack stainless steel sinter-filter probe protects ...
-
Model FTIR 2030 - MKS - Multi-Gas Analyzer
MultiGas 2030 CEM is an FTIR-based gas analyzer designed for continuous monitoring of emissions in effluent streams containing up to 40% of water. Permanently stored calibration spectra reduces the need for costly reference gas ...
-
Mercury and Gas Sampling Equipment
-
Apex Instruments - Model XC-260 - Manual Mercury Audit Source Sampler
The XC-260 Hg Source Sampler is designed for performance testing, base line studies, and profiling. This low-cost, portable, and field-proven audit system is easy to learn and use, and is ideal for sampling mercury emissions based on Reference Method 30B of the U.S. EPA Appendix K, 40 CFR, Part 60. The XC-260 Hg Audit System is used for manual sampling of gaseous mercury emissions over a period of several minutes to several hours. The system ...
-
MercSampler - Model XC-6000EPC-W - Automated Sorbent Trap Monitoring System
The automated XC-6000 EPC MercSampler for Sorbent Trap Monitoring Systems is designed for continuous dual sampling of vapor-phase mercury emissions from stationary combustion sources, in accordance with the U.S. EPA MATS published in 40 CFR, Part 60-63, Appendix A, Subpart UUUUU and is MATS compliant. Performance Specification 12B: Specifications and Test Procedures for monitoring total vapor phase mercury emissions from stationary sources using a ...
-
MercSampler - Model XC-30B - Automated Sampling Console, 110V with Laptop
The XC-30B MercSampler Console, designed especially for performing Method 30B, simplifies sampling requirements by automating data acquisition, sample flow adjustments, leak checks, calculations, temperature control, and calibrations. Data is easily transferred to a Microsoft Windows Based PC through USB Interface. The XC-30B MercSampler performs dual sorbent trap sampling at flow rates up to 2.0 lpm. Can be operated with your choice of probes and gas ...
-
Apex Instrument - Mercury Sorbent Traps
PS 12B specifies sampling, and analytical, and quality-assurance criteria and procedures for the performance-based monitoring of vapor-phase mercury (Hg) emissions in combustion flue gas streams, using a sorbent trap monitoring system. The principle employed is continuous sampling using in-stack sorbent media coupled with analysis of the integrated samples. The performance-based approach of Appendix K allows for use of various suitable sampling and ...
-
Flow, Pressure and Temperature
-
Apex Instruments - 2D Measurement Flow System
The Apex Accu-Flow Measurement System uses a two-dimensional 3-hole prism-shaped pitot for accurately measuring flow rates for angular non-axial flow for Method 2G This system provides a way for testers to improve the measurement of volumetric flow rate under cyclonic flow conditions found in some stacks and ducts. Multiple probes reduce the time for the flow Audits, therefore saving money by not operating at undesirable loads. Oversized sensor ports ...
-
Apex Instruments - Model SK-3D52 - 3D Flow Measurement System
The Apex Instruments MC-3D52 3-D Flow Measurement Console and System is used in conjunction with the 3-D Pitot to determine velocity pressure, and the yaw and pitch angles of the flow velocity vector in a stack or duct according to U.S. EPA Method 2F (the determination of stack gas velocity and volumetric flow rate with three-dimensional probes). This console features stable and reliable differential pressure transducers for the most demanding of stack ...
-
Gas Analysis Equipment
-
Tri-Sample Probe
The Apex Instruments Tri-probe allows the simultaneous sampling and monitoring from three distinct sampling points. The manifold and filter unit comes with six holes, for a unique design made for RATA sampling. The user can now extract samples without moving the probe to different traverse points. Traverse points acquire representative samples The Tri-Probe has multiple probe extension options to meet the specifications of any test ...
-
MKS MultiGas - Model 2030 CEM - Gas Analyzer for Continuous Emissions Monitoring
MultiGas 2030 CEM is an FTIR-based gas analyzer designed for continuous monitoring of emissions in effluent streams containing up to 40% of water. Permanently stored calibration spectra reduces the need for costly reference gas ...
-
Gas Analysis Equipment - ECOM Instruments
-
ECOM - Model CN-OC - Low CO Handheld Gas Analyzer
ECOM America Ltd., manufactures portable emission / combustion analyzers for many applications. From single gas Oxygen and Carbon Monoxide analyzers for flue gas testing to multi-gas analyzers measuring Oxygen, Carbon Monoxide, Nitric Oxide, Nitrogen Dioxide, Sulfur Dioxide, & Hydrocarbons offered in several configurations, we have instruments for most combustion applications. Several models are approved and recognized by Regional, State, and ...
-
Apex Instruments - Model XC-563 - Source Sampling Console
Apex Instruments Model 563 Source Sampling Console is the digital equivalet to the XC-522 and XC-572; featuring an AP25 Dry Gas Meter with optical encoder and digital totalizer. The console also features differential pressure tranducers for Delta P and Delta H. The temperature controllers, thermometer and timer all have digital displays. All applicable components are rated 110V / ...
-
Isokinetic Sampling Consoles
-
Apex Instruments - Model XC-522 - Standard Meter Isokinetic Sampling Consoles
The Apex Instruments Model XC-522 is a full featured manual meter console. The Apex Isokinetic Source Sampling Console allows the operator to monitor gas velocities, temperatures, pressures and adjust sample flow rates to maintain isokinetic sampling conditions. Designed with convenient display layout for manual data recording. The Apex Instruments Isokinetic Source Sampling Consoles are manufactured to conform to the construction design criteria and ...
-
Apex Instruments - Model XC-572 - Metric Meter Isokinetic Sampling Consoles
The XC-572 Source Sampling Console is the metric version of the XC-522. It is a full featured, compact, and lightweight Isokinetic Source Sampler. It has all the great features you want and the reliability you need. Field set up is easy with non-reversible external pump connections and the industry standard 4-pin electrical connector. (External sample pump sold separately). Console allows operators to monitor gas velocities, temperatures, pressures, ...
-
Isokinetic Sampling Pump
-
Apex Instruments - Model XE-0523 - Vane Pump in Polyethylene Case
Lubricated Rotary Vane Pump (XE-0523) The Lubricated Rotary Vane Pump includes two 5’ wire-reinforced, kink-free hoses with nonreversible quick connects. The pump is tubular steel frame, or the standard x-case with removable covers providing easy access for service. The wick style lubricator requires less maintenance. All applicable components are rated 110V / ...
-
Apex Instruments - Model XE-DAA - Double Head Diaphragm Pumps
The Double Headed Diaphragm Pump will never require any lubrication. Pump is easy to service within its frame and includes a power cord, two 5’ wire-reinforced, kink-free hoses with non-reversible stainless steel quick connects (this pump is not recommended for use in extremely cold environments). All applicable components are rated 110V / ...
-
Mercury Sampling Consoles
-
MercSampler - Model XC-6000EM - Automated Console for Paired Hg Sorbent Sampling
XC-6000EM Automated Console for Paired Hg Sorbent Sampling. Features Proportional Valves w/Mass Flow Sensors, Pressure Transducers, DGMs w/Optical Encoders, Diaphragm Pumps. Ethernet/Modbus for DAS Interface and/or other Ethernet devices, USB Interface, 120VAC With Wired Router. (Laptop sold ...
-
MercSampler - Model XC-6000EM-V - Automated Console for Paired Hg Sorbent Sampling
XC-6000EM-V Automated for Paired Mercury (Hg) Sorbent Sampling. Proportional Valves w/Mass Flow Sensors, Pressure Transducers, DGMs w/Optical Encoders, Diaphragm Pumps. Ethernet/Modbus for DAS Interface and/or other Ethernet devices, USB Interface, 220VAC With Wired Router. (Laptop sold ...
-
Flow, Pressure, and Temperature - Pitots
-
Model Type-S 4PT-2 - 2 FT Stainless Steel Pitot, 1/4 IN Tube
Type S Pitot Tubes are used to measure the gas velocities. When the pitot is faced into the gas stream, flow and the pressure difference between the two ports equates to the velocity pressure. This differential velocity pressure is measured with liquid manometers or electronic pressure ...
-
Standard Pitots
Ideal for use with manometers and Magnehelic® gauges, Pitot Tubes are constructed from corrosion resistant, 304 stainless steel for a lifetime of service. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with airflow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4 inch diameter or as large ...
-
Gas Analysis Equipment - Moisture Analyzers
-
Apex Instruments - Model MAC125 - Continuous Moisture Analyzers
The MAC125 high temperature moisture analyzer is capable of measuring absolute humidity in almost any temperature. The measurement process uses no chemicals, compressed air, wet bulb techniques, optics, or mirrors. The probe is protected from particulates by a 10 micron stainless steel sintered filter element that is cleanable and replaceable. The measurement process is patented and uses a proprietary sensor which responds to the partial pressure of ...
-
Apex Instruments - Model MAC155-CT - Continuous Moisture Analyzers
For continuous stack monitoring with built in calibrator Measures absolute humidity to 1200°F / 650°C (optional to 2400°F / 1300°C ) Can be used to higher temperatures with accessories % Moisture by volume Contains built in equipment allowing daily 2 point calibration and system checks Can be recalibrated in the field using internal ...
-
Mercury Gas Conditioners Dryer
-
Apex Instruments - Model SGC-4000HG - Stirling Gas Cooler
The Apex Instruments SGC-4000HG Stirling Gas Cooler is specially designed for removing moisture and acid gases from flue gas samples. This new gas cooler uses an industrial grade super efficient Free Piston Stirling Cooler (FPSC) for chilling the sample gas to remove moisture. The Stirling will provide a robust, closed, dual channel gas conditioning system to deliver dry, acid free gas to the meter console No peristaltic pumps to ...
-
Apex Instruments - Model SGC-4000HGP - Stirling Gas Cooler
The SGC-4000HGP Stirling Cooler Gas Conditioner Portable Unit comes with a top handle for easy transport and a durable UHMW polyethylene 6U case with condensate collection bottles. Any of the configurations are suitable for use with the Appendix K Mercury Sorbent Trap Sampling System. All applicable components are rated 110V / ...
-
Flow, Pressure, and Temperature - Manometers
-
Model DHM28-10 - Handheld Digital Manometers
The DHM28-10 is a precision instrument designed to measure a wide range of pressures to a very high accuracy. Features include: measurement in all common pressure ranges, display resolution to .001, differential or relative measurement, two line liquid crystal display, and adjustable auto power off to conserve battery. A certificate of calibration is included with the unit at no additional cost. The DHM28-10 can be used as a secondary calibration ...
-
Model DHM-M100 - Handheld Meriam Digital Manometer
DHM-M100 · Hand-Held Meriam Digital Manometer, 0-28 inch H2O Selectable Range, English/Metric. Meriam Digital Manometer, Hand held, 0-28 inch H2O Selectable Range, English/Metric, with certificate of NIST ...
-
Isokinetic Sampling Nozzle
-
Borosilicate Glass Nozzles
Apex Instruments offers Button-Hook Nozzles in multiple materials. The size needed for isokinetic sampling depends on the stack gas velocity; the material depends on the stack temperature and the sampling method. The most popular nozzles are constructed from seamless 316 stainless steel and can be coated with FEP or SilcoSteelCR®. Other nozzle materials include Borosilicate Glass, Alloy 600 and Quartz. Standard sampling nozzles are 4' long and have ...
-
Mercury Probes
-
Model HGPA-8-HS - 8 Foot Air Cooled Mercury Probe
Reliable and Easy To Use With Quick Set-Up Time. Cement MACT Compliant. 8 Foot Stainless Steel Dual Sorbent Trap Hg Probe, Air Cooled, Single Heater; 2' Tube Sheath; Two 10mm Fittings; Type K Stack, Trap & Probe Thermocouples; 1/2' Sample Lines; Insulated Junction Enclosure; 1000W/120V (blower sold ...
-
Flow, Pressure, and Temperature - Anemometers
-
Traceable - Model AN-4330 - Hot Wire Anemometer with Dual Thermistors Probe
Hot Wire Anemometer with two miniature glass-bead thermistors provides greater precision at low air velocities. Telescope probe expands from 9.2 inches to 3 feet for hard-to-reach places. Eliminate friction errors caused by rotating vanes with this no-moving parts. Serial RS-232 output allows anemometer to be connected to a computer or data logger for monitoring results. Memory function recalls the highest and lowest readings. A data hold button ...
-
Gas Analysis Equipment - Filter Assemblies
-
Model SFA-2564HE-A - CEM Filter Assembly and Silicone Insulated Enclosure
Heated SFA-2564 CEM Filter Assembly and Silicone Insulated Enclosure, Accepts GF-2564 Filter Elements. FILTER ASSEMBLIES - The oven can accept an 18’ long heated probe with 2' diameter sheath. The probe uses a replaceable 3/8' stainless steel liner. The oven features a lightweight construction, with a rugged strip heater, 1/2' insulation, high temperature and stainless steel hardware. Type-K thermocouple jacks are used for monitoring probe and ...
-
Isokinetic Sampling Probe
-
Model APS-4I - 4 FT Air Cooled Inconel Probe Liner
Air Cooled Method 5 Probes are applicable for high temperature sources. Concentric tubular design allows the cooling air to return and exhaust out of the stack. The probe sheath is constructed from stainless steel tubing while the liner, pitot, thermocouple and nozzle union are made from inconel. A variable speed high capacity blower is needed for cooling. Order blower ...
-
Flow, Pressure, and Temperature - Barometers
-
Model BAR-4198 - Handheld Digital Barometer
Handheld Digital Barometer measures altitude, temperature, and barometric pressure. Also has a stopwatch/time of day clock and graphically displays the barometric pressure trend. Barometric pressure trend shows current reading and previous 2-, 4-, 6-, 8-, 10-, and 12 hours in bar-chart format. Barometric pressure reading is updated every 15 minutes. Altitude is displayed in meters or feet. Reading is updated every 2 seconds. Features a minimum/maximum ...
-
Flow, Pressure, and Temperature - Flow Meter
-
Model VUA-561 - Low Flow Adapter for Meter Console
The VUA-Series Low Flow Orifice Adapters feature a calibrated, critical sapphire orifice with liquid filled vacuum gauge, brass fittings and inline filter to adapt to Apex Instruments’ isokinetic source samplers for methods requiring low flow sampling. The adapters are used for VOST and Method 6-type sampling. Adapters include 1/2' male and 1/4' female brass quick connects to attach the isokinetic source sampler to the VOST VU-cords. Three ...
-
Gas Analysis Equipment - Heated Sample Lines
-
Apex Instruments - Model HSLP-64-100 - Heated Sample Lines for Portable Systems
Apex Pro-Series Designed for Portable Systems The Apex Instruments Heated Sample Lines are designed for the professional stack tester that needs a rugged lightweight flexible sample line that can handle the abuse of IRM sampling day after day. The standard core includes one 3/8” PFA tube for the sample and one 1/4” tube for introducing calibration gas at the probe. Both lines have stainless steel over- braid and swaged tube stubs ...
Products by EyeCGas - OGI by OPGAL
-
EyeCGas - Hand Held Solutions
-
EyeCGas - 2.0 for Methane, Hydrocarbons, more than 400 VOCs and CO2
EyeCGas® 2.0 is the world’s most sensitive handheld OGI camera. It quickly identifies fugitive gas emissions for over 400 hydrocarbon and VOC gasses. Including Methane and CO2. EyeCGas® 2.0 is Intrinsically Safe and complies with the EPA’s “Quad Oa” (OOOOa) regulations. EyeCGas® is used globally across the industry for LDAR compliance. It is certified and Classified for hazardous environments ANSI/ISA-Class I and II, ...
-
EyeCGas Mini - Compact Optical Gas Imaging Camera
EyeCGas Mini is the world’s most compact and simple to operate leak detection infrared camera. This uncooled OGI camera offers multiple models which can detect Methane, SF6, Ammonia, R134 and more. With features such as wireless communication, data streaming, Image fusion, thermography, video & audio recordings. The EyeCGas Mini will revolutionize the way inspections are ...
Products by ecom GmbH
-
Flue Gas Analysis
-
ecom - Model B - Flue Gas Analyser
O2/CO (H2 comp.) Longlife sensors (lifespan 5-6 years by normal operation). Automatic CO switch-off and fresh air purge (without measurement interruption). Robust and light aluminium housing fitted with magnets on the back. Integral lithium-ion battery with extended operation time. Complete with sampling probe incl. fication cone and 3-chamber tubing. T-Room probe. Charger. Condensate trap with moisture-absorbing pad and optical ...
-
ecom - Model CL2 - Flue Gas Analyser for Heating Applications
O2 /CO (H2 comp.) Longlife sensors (lifespan higher than 4 years by normal load). Automatic CO switch-off and fresh air purge (without measurement interruption). Robust protection aluminium housing with stable carrying grip and fixation for carrying grip. Operation as wall-positioned instrument: powerful magnets on the back for fixation on all metal surfaces. Operation as floor-standing instrument: foldable and slip-proof tilt ...
-
ecom - Model EN3 - Compact Measurement Instrument
Probe, sampling tubing, printer, transport case with carrying strap. Longlife sensors. CO sensor overload protection without measurement interruption. Electronic condensate monitoring. Low-maintenance, high-performance pump. TFT color display and backlit keypad. Powerful Lithium-Ion ...
-
ecom - Model EN3-R - Flue Gas Analyser with Integral Soot Measurement
Flue Gas Analyser with Integral Soot Measurement. Compact, accurate, robust, safe, efficient, versatile, full equipment. Integral soot measurement: perfect for oil-fired heating plants. Longlife sensors. CO sensor overexposure protection without measurement interruption. Electronic condensate monitoring. Low-maintenance, high-performance pump. Powerful Lithium-Ion battery. TFT color display and backlit keypad. Aluminium housing (ultra-light) and ...
-
Pressure Measurement
-
ecom - Model UNO - Pressure Measurement Analyser
For Adjustments of Gas Burners/Gas Heatings. Four changeable units: hPa/mbar, mmH2O, psi, mmHg. Ranges: ± 200 hPa, ± 2038 mmH2O, ± 2.9 psi. and ± 150 mmHg. Accuracy: 1%. Power supply: 2 one-way batteries AA 1.5 V (Mignon). Dimensions (H x W x D): approx. 106 x 64 x 28 mm. Weight: approx. 150 gr (with batteries). Scope of delivery: ecom-UNO, batteries, protective ...
-
ecom - Model DP3 - Pressure-Meter
Fully automatic pressure checks. Internal pump for pressure build-up up to 1.5 bar. Integral thermal quick-printer. Fully automatic leakage rate determination within a few minutes (gas sampling not required). Suitability check in no time. Safe and fully automatic check routines. For gas (TRGI), liquid gas (TRF), water (TRWI) and sewage pipes checks. For further measurements up to 40 bar (with external sensors). PC software included in ...
-
ecom - Model DP - Pressure Measurement Profi Set
For pressure measurements at gas burners. For tightness check of gas fittings (± 100 to 150 mbar). Check of gas connection pressure. Measurement of gas adjustment pressure. Adjustement of gas pressure controller. Adjustment of air pressure ...
-
ecom - Model DP - Engine Pressure-Meter
For pressure measurements at gas engines. Gas pressure control. Differential pressure measurement at air intercoolers. Measurement of flue gas overpressure. Differential pressure measurement at blow-by-filters. Measurement of crankcase pressure. Suitable for pressure measurements at gas heatings / burners. Thermal printer as accessory. Min./Max. function (storage of lowest or highest value). Freeze function (manual temporary storage of a specific ...
-
Leakage Detection
-
ecom - Model LSG - Leak Detector for Detection of Flammable Gases
Indication range up to 0.5% vol. CH4. 3 freely adjustable sensitivity levels. Reaction time: < 2 seconds. Flexible swan-neck with movable sensor head. Indication: display size approx. 20 x 7 mm, backlit, diagramm. with 1-14 bars (10 bars = approx. 1000 ppm CH4). Sensor temperature compensation (-5°C to 40°C). Acoustic signal regulation via ON/OFF function resp. via. earphones output (3.5 mm jack plug). Power supply: 2 x AAA batteries (= ...
-
Disturbance Diagnosis
-
ecom - Model AK - Disturbance Diagnosis Analyser
ecom-AK - Read-out head for digital firing automates. Automatic recognition of firing automate model. Read-out function for errors and operation stands. Integral ...
