17 News & Press Releases found

News

indicates free access

  • DOAS Explained

    DOAS Explained

    DOAS stands for Differential Optical Absorption Spectroscopy. The DOAS technique was conceived almost a century ago, and it was applied on research level to air quality monitoring already in the 1970s. In the mid-1980s, the technology was then ...

  • OPSIS Sponsors the A&WMA West Coast Section 2017 Annual Conference

    OPSIS Sponsors the A&WMA West Coast Section 2017 Annual Conference

    Together with AQM Resources OPSIS sponsors the A&WMA West Coast Section 2017 Annual Conference in Los Angeles. Carl Kamme from OPSIS will hold a presentation about Open-Path Monitoring Technology for Fence-line Monitoring.

  • OPSIS Certified According to New ISO Standards

    OPSIS Certified According to New ISO Standards

    During a week in February/March this year, the certification body Intertek carried out an audit at OPSIS headquarters in Furulund. It was a comprehensive activity where our management system was certified according to the new standards ISO 9001:2015 ...

  • High NOx Emissions from Diesel Cars

    High NOx Emissions from Diesel Cars

    It is time to sell your diesel car. In a few years you will not be able to use it in a city. The real drive emissions measurements from passenger cars are giving astonishing results. A new diesel car has 10 times higher NOx emissions ...

  • Monitoring Ambient Air Quality in Karlstad

    Monitoring Ambient Air Quality in Karlstad

    Since the 1st of June, 2016, OPSIS is monitoring the ambient air quality in Karlstad municipality, in Sweden.  The OPSIS system is located in the centre of the city of Karlstad, monitoring the levels of NO2 and PM10. The results can be ...

  • OPSIS System 400 for CEM applications video

    OPSIS System 400 for CEM applications video

    OPSIS new video presents our versatile System 400 for CEM applications. One System 400 offers three possible monitoring solutions depending on the conditions of the monitoring site at hand - the cross-stack, the fast-loop, and ...

  • New OPSIS video on continuous emissions monitoring

    New OPSIS video on continuous emissions monitoring

    OPSIS new video presents our versatile System 400 for CEM applications. One System 400 offers three possible monitoring solutions depending on the conditions of the monitoring site at hand - the cross-stack, the fast-loop, and the hot wet ...

  • OPSIS Monitors the Ambient Air in Sweden

    OPSIS Monitors the Ambient Air in Sweden

    OPSIS AB has installed two new AQM Monitoring Systems in Sweden. The two systems are placed in the cities of Trelleborg and Arvika. They monitor NO2, SO2 and PM10 particles. The contracts started the 1st of January 2016 and the measurements are ...

  • Air Quality Monitoring Network Contract Awarded to OPSIS

    Air Quality Monitoring Network Contract Awarded to OPSIS

    OPSIS AB has been commissioned by Kuwait Oil Company (KOC) to assess the impact of KOC:s operations in the state of Kuwait. A network of air quality monitors will  be managed. Emissions to the air from KOC:s operations will be ...

  • OPSIS AB Receives €2.3 Millions from EU Research Programme Horizon 2020

    OPSIS AB Receives €2.3 Millions from EU Research Programme Horizon 2020

    OPSIS AB has been selected by the European Commission to develop a new system for online measurement in food production. OPSIS AB receives 2.3 million Euro business innovation grant by EU’s research and Innovation programme, Horizon 2020. ...

  • OPSIS is now certified according to OHSAS 18001

    OPSIS is now certified according to OHSAS 18001

    During the last year, OPSIS has focused on health and safety as a part of the company’s overall goals. This dedication has resulted in an OHSAS 18001 Occupational and Health Safety certification. The purpose of this newly-implemented safety ...

  • Opsis Monitors the Air Quality in UAE

    Opsis Monitors the Air Quality in UAE

    Opsis AB has been assigned to manage the national network for air quality monitoring in Abu Dhabi.  The network includes 22 monitoring stations that gradually will be upgraded to modern measurement technique developed by Opsis for monitoring ...

  • EN 15267 Approved Mercury Monitoring System

    EN 15267 Approved Mercury Monitoring System

    The measurement of total gaseous mercury is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintenance, still not giving reliable results. The OPSIS System 400 is different and provides ...

  • DNV Approval for OPSIS M800 DOAS System

    DNV Approval for OPSIS M800 DOAS System

    OPSIS M800 DOAS monitoring system has been type approved by Det Norske Veritas (DNV). The system is found to comply with the standards for monitoring on ships. The certificate also includes an update of the previous approval of OPSIS M1040/42 ...

  • ER110 and ER150 TÜV Certified

    ER110 and ER150 TÜV Certified

    The QAL 1 certificate from TÜV/UBA for Opsis AR500 ambient air quality monitoring analyser, has been updated to include monitoring with Opsis ER110 and ER150 Emitter and Receiver Sets. The system complies with EN 15267. The ...

  • MCERTS EN 15267 Approved TGM System

    MCERTS EN 15267 Approved TGM System

    The Opsis mercury system (AR602Z/Hg) has been tested and approved according to EN 15267 by MCERTS SIRA, U.K., for CEM installations.  See the complete MCERTS Certified Products List on >> Opsis flexible Hg DOAS system combines ...

  • SM200 receives U.S EPA FEM approval for PM2.5

    SM200 receives U.S EPA FEM approval for PM2.5

    On August 16, the U.S EPA notified us that the review of our application for SM200 particulate monitor as Federal Equivalent Method had been completed, and SM200 was approved. To get the PM2.5 approval, five field tests, of about one month each, ...