Opsis AB

13 products found

Products

  • Continuous Emissions Monitoring

  • OPSIS - Cross-Stack UV & FTIR DOAS Systems

    OPSIS - Cross-Stack UV & FTIR DOAS Systems

    OPSIS CEM systems measure multiple emissions or process gases in real time in situ. Using the DOAS (Differential Optical Absorption Spectroscopy) technique, the system is non-contact, with fast response.

  • OPSIS - Model 400CS - Cross-Stack System

    OPSIS - Model 400CS - Cross-Stack System

    System 400CS is a cost-effective, high-performance monitoring package, designed for power plants and waste to energy plants. The measurements are based on the FTIR (Fourier Transform Infrared Spectroscopy) and/or 

  • Model 400FL - Fast-Loop System

    Model 400FL - Fast-Loop System

    System 400FL combines the benefits of hot wet extractive and in situ. The gas is moved at high speed in a bypass line. No filter or probe is used and the measurement takes place in a non-contact measurement cell.

  • OPSIS - Model 400HWE - Hot Wet Extractive System

    OPSIS - Model 400HWE - Hot Wet Extractive System

    System 400HWE Hot Wet Extractive is based on OPSIS UV/FTIR DOAS system giving fast response and best possible performance for all gases. The high resolution FTIR system is free from interference from all gases including water.

  • OPSIS - Model LD500 - Laser Diode Gas Analyser (CEM)

    OPSIS - Model LD500 - Laser Diode Gas Analyser (CEM)

    OPSIS LD500 Analyser is the central unit in the laser diode gas monitoring system. It can house up to four laser diode heads. Each head is a complete laser control and data sampling system. A built-in PC with LCD display controls the function of the instrument.

  • OPSIS - Model M800 - Marine System

    OPSIS - Model M800 - Marine System

    The DNV-GL approved System M800 measures SO2 and CO2 using the reference methods NDUV and NDIR. A light emitter and receiver creates a light path across the internal diameter of the stack. From the receiver, the light is guided in an optical fiber to the analyser.

  • OPSIS - Model O2000 - Oxygen Monitor System

    OPSIS - Model O2000 - Oxygen Monitor System

    The OPSIS O2000 oxygen monitor is designed to monitor oxygen concentrations in industrial applications such as continuous emissions monitoring (CEM) and process control. It has been given a ruggedized design (IP65 protection) allowing it to operate under tough conditions in aggressive flue gas environments.

  • OPSIS - Model ER060L-EEx - Emitter and Receiver Systems

    OPSIS - Model ER060L-EEx - Emitter and Receiver Systems

    The ER060L-EEx emitter and receiver set, together with Opsis LD500 laser diode gas analyser, is designed for gas monitoring in explosion classed areas Zone 1 and 2. The monitoring set creates a light path across the internal diameter of a stack or duct for an Opsis emissions monitoring system. Light is generated by the analyser, passed through the emitter and projected to the receiver.

  • OPSIS - Model DL256 - Data Logger (CEM)

    OPSIS - Model DL256 - Data Logger (CEM)

    OPSIS data logger system is designed for data acquisition applications. The data logger can handle analogue and digital input and output signals as well as serial communication.