Particle Measuring Systems

39 products found

Particle Measuring Systems Products

  • Airborne Particle Counters

  • Lasair III - Model 310B, 310C, 350L, 5100 - Aerosol Particle Counter

    Lasair III - Model 310B, 310C, 350L, 5100 - Aerosol Particle Counter

    The Lasair® III Aerosol Portable Particle Counter is designed for cleanrooms with your unique needs in mind. It sets the standard for portable aerosol particle counters in highly regulated environments, so you can make sure your environment is clean. It can be used for both remote and mobile routine cleanroom monitoring. We know the requirements and we’ve done the calculations for you; cleanroom...

  • Lasair III - Model 110 - Airborne Particle Counter

    Lasair III - Model 110 - Airborne Particle Counter

    The Lasair III 110 Aerosol Particle Counter is a laser diode-based true 0.100μm particle counter with 1.00CFM flow rate that doesn’t negatively impact your environment. It provides real-time measurement of yield-impacting particles with three configurations to meet your unique application needs. With a comprehensive set of features and unequalled accuracy, the Lasair III 110 Particle Counter offers reduced operating costs and the reliability...

  • IsoAir - Model 310P - Particle Sensor

    IsoAir - Model 310P - Particle Sensor

    The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed...

  • Airnet - Model II 4 - Channel Air Particle Sensor

    Airnet - Model II 4 - Channel Air Particle Sensor

    The Airnet® II 4 Channel Air Particle Sensor meets the specifications of ISO 21501-4 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. A simple and cost-effective way to monitor your cleanroom, the Airnet II Particle Sensor...

  • Airnet - Model II and IIs - 2 Channel Air Particle Sensors

    Airnet - Model II and IIs - 2 Channel Air Particle Sensors

    The Airnet® II and IIs 2 Channel Air Particle Sensors meet the specifications of ISO 21501-4 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. A simple and cost-effective way to monitor your cleanroom, the Airnet II Air Particle Sensor provides...

  • Model HPGP-101-C - High Pressure Gas Probe

    Model HPGP-101-C - High Pressure Gas Probe

    High-technology manufacturing processes often require high-purity gases. The HPGP-101-C High Pressure Gas Probe System provides reliable in-line contamination monitoring for process gases at line pressure. The High Pressure Gas Probe System is compatible with oxygen, hydrogen and most non-toxic gases, and it can be used in many reactive gas monitoring applications. The High Pressure Gas Probe System speeds qualification of...

  • Model AM ll – 16/32 - Aerosol Manifold for Air Particle Counters

    Model AM ll – 16/32 - Aerosol Manifold for Air Particle Counters

    The AM ll Manifold offers advanced features for sequentially monitoring aerosol contamination at multiple locations with a fixed particle counter. The AM ll is ideal for trend analysis and cleanroom verification when continuous monitoring is not needed. Compatability: Lasair® II or

  • HPD - Model III - High Pressure Diffuser

    HPD - Model III - High Pressure Diffuser

    The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its flowmetering system and possibly damage the instrument.

  • Lasair - Model III 110 - Inline Particle Counter

    Lasair - Model III 110 - Inline Particle Counter

    The Lasair® III 110 is a laser diode-based true 0.1 μm particle counter with 1.0 CFM flow rate. With a comprehensive set of features and unequalled accuracy, the Lasair III 110 offers reduced operating costs and the reliability and longevity to support its three-year laser warranty.

  • Model HPD II - High Pressure Diffuser

    Model HPD II - High Pressure Diffuser

    The HPD II reduces the pressure of dry, inert, non-toxic, non‑flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric pressure.

  • HandiLaz - Model Mini II - Handheld Airborne Particle Counter

    HandiLaz - Model Mini II - Handheld Airborne Particle Counter

    The HandiLaz®Mini II Particle Counter is ergonomically designed to fit in the palm of your hand. Rugged and dependable, the light weight Mini II provides tremendous value for cost-conscious users who want a reliable, easy-to-use, handheld particle counter. With a comprehensive set of features, the HandiLaz® Mini II handheld Airborne Particle Counter offers a low cost alternative for spot monitoring and a simple...

  • Microbial Active Air Samplers, Impactors & Monitors

  • MiniCapt - Mobile Microbial Air Sampler

    MiniCapt - Mobile Microbial Air Sampler

    The MiniCapt® Mobile Microbial Air Sampler is an innovative, light and mobile air sampler. It simplifies the job of microbial air sampling by applying modern data management capabilities that save time and reduce operator error in air sampling data. The MiniCapt Mobile Air Sampler makes the job easier by incorporating a capacitive and sliding touchscreen, allowing easy use with gloves without the need for a stylus.

  • BioCapt - Single-Use Microbial Impactor

    BioCapt - Single-Use Microbial Impactor

    The BioCapt® Single-Use Microbial Impactor helps minimize false positives for microbial activity in pharmaceutical cleanrooms by reducing contamination from handling of agar plates. This results in a decrease in investigations while increasing productivity. Additionally, many costly and time consuming sterilization steps, such as autoclaving, disinfecting, handling and logistics are eliminated. This...

  • BioCapt - Microbial Impactor

    BioCapt - Microbial Impactor

    The BioCapt® Microbial Impactor enables the capture of microbiologically viable particulates on a suitable media surface for later incubation and enumeration. With precision-cut slits to ensure laminar flow, the BioCapt Viable Microbial Impactor maximizes collection efficiencies for viable particles in accordance with ISO 14698-1. The 25 L/min flow rate ensures sample volume is collected slowly enough to enable sampling during the...

  • MiniCapt - Remote Microbial Air Sampler

    MiniCapt - Remote Microbial Air Sampler

    Ideally suited for aseptic environments, the MiniCapt® Remote Microbial Air Sampler simplifies the job of microbial air sampling by applying modern data management capabilities that save time and reduce operator error in air sampling data. The MiniCapt Viable Microbial Sampler uses a unique HEPA-filtered exhaust so it doesn’t contaminate the cleanroom. With a small footprint, the MiniCapt Microbial Sampler can operate virtually...

  • MiniCapt - Compressed Gas Kit

    MiniCapt - Compressed Gas Kit

    The MiniCapt® Compressed Gas kit allows the MiniCapt Mobile Microbial Sampler to perform microbiological monitoring of compressed gases. The compressed gas kit is designed to work with either the 25 LPM, 50 LPM, or 100 LPM MiniCapt systems.

  • Remote Isolator Kit

    Remote Isolator Kit

    When remote and flexible monitoring with no fixed sampling point is needed, the Remote Isolator Kit allows for samples to be taken at a distance while maintaining the integrity of the measurement. The Kit uses a remote sample head where the measurement is taken in-situ and the control of the MiniCapt® instrument is performed outside the critical area. It can also be integrated into a facility monitoring system (FMS) with an external vacuum.

  • Remote Sampling ISP Kit

    Remote Sampling ISP Kit

    When remote and flexible monitoring with no fixed sampling point is needed, the Remote Sampling Isokinetic Sampling Probe (ISP) Kit a I lows for samples to be taken while maintaining the integrity of the measurement. The ISP Kit uses a length of sample tubing to connect the sample point to the impaction plate, and is ideal for minienvironment sampling applications such as RABS, Laminar Flow Cabinets and Blow-Fill-Seal/Form-Fill-Seal settings.

  • Liquid Particle Counters

  • Chem 20 - Chemical Particle Counter

    Chem 20 - Chemical Particle Counter

    Leading-edge microelectronic processes require very clean process chemicals that are highly filtered and regulated to a particle size of 20 nm or below. With 20 nm particle sensitivity, the Chem 20 Chemical Particle Counter is the world’s most sensitive particle sensor for high purity process chemicals. Extensive data on chemical distribution and packaging systems proves that the Chem 20 sensor, with 20 nm...

  • Ultra DI - Model 20 - Liquid Particle Counter

    Ultra DI - Model 20 - Liquid Particle Counter

    Designed specifically for ultrapure water systems, the Ultra DI® 20 Liquid Particle Counter quickly obtains statistically meaningful data and will count and size contaminants as small as 20 nm. Consistency helps you get more out of your data, even if the instrument moves, so you have more control over your process. The Ultra DI 20 Particle Counter has a low zero count, large sample volume and high counting...

  • Ultra DI - Model 50 - Liquid Particle Counter

    Ultra DI - Model 50 - Liquid Particle Counter

    The Ultra DI 50 Liquid Particle Counter is designed specifically for de-ionized (DI) water systems and will count and size contaminants as small as 0.05μm. Larger sample volumes and ultra-low zero counts detect smaller excursions with more relevant statistical data, while shorter sample intervals speed up your analysis time. Respond immediately to contamination with real-time measurement of particles, and Save time with fast clean-up and the...

  • UltraChem - Model 100 - Liquid Particle Counter

    UltraChem - Model 100 - Liquid Particle Counter

    The UltraChem® 100 Liquid Particle Counter gives you reliable contamination monitoring with the ability to detect the smallest particle possible. If your application requires measuring small particles in chemicals with high molecular scatter, the UltraChem Liquid Particle Counter is the best tool for the job.

  • UltraChem - Model 40 - Liquid Particle Counter

    UltraChem - Model 40 - Liquid Particle Counter

    The UltraChem® 40 Liquid Particle Counter gives you reliable contamination monitoring with the ability to detect 40 nm particles. If your application requires measuring small particles in chemicals with high molecular scatter, the UltraChem Liquid Particle Counter is the best tool for the job. NanoVision...

  • LiQuilaz - Model II S Series - Liquid Particle Counter

    LiQuilaz - Model II S Series - Liquid Particle Counter

    LiQuilaz® II optical liquid particle counters are volumetric monitors with a variety of sizing sensitivities as low as 0.2 µm. They provide high precision analysis for most process chemicals, including hydrofluoric acid and hot corrosive chemicals up to 306 °F (152 °C). LiQuilaz II sensors provide the same levels of accuracy, reliability and repeatability that customers have trusted for many years....

  • LiQuilaz - Model II E Series - Liquid Particle Counter

    LiQuilaz - Model II E Series - Liquid Particle Counter

    The LiQuilaz II E15P, E20, and E20P optical liquid particle counters are volumetric monitors with sizing sensitivities from 1.5 – 125 µm. LiQuilaz II sensors provide the same levels of accuracy, reliability and repeatability that customers have trusted for many years. LiQuilaz II sensors feature both RS-485 and Ethernet network communications. The new Ethernet...

  • Model HSLIS-M65e - Liquid Particle Counter

    Model HSLIS-M65e - Liquid Particle Counter

    The High Sensitivity Liquid in Situ (HSLIS-M65e) Particle Counter provides continuous, real-time monitoring of contamination levels in corrosive liquids, including hydrogen fluoride (HF). The HSLIS Liquid Particle Counter makes it easy to always understand the characteristics of your working fluid. The combination of high sensitivity and low cost makes it ideal when large numbers of sensors and/or long-term trending are required. Integration of...

  • Model HSLIS-M100e - Liquid Particle Counter

    Model HSLIS-M100e - Liquid Particle Counter

    The High Sensitivity Liquid in Situ (HSLIS-M100e) Particle Counter provides continuous, real-time monitoring of contamination levels in corrosive liquids, including hydrogen fluoride (HF). The HSLIS Liquid Particle Counter makes it easy to always understand the characteristics of your working fluid. The combination of high sensitivity and low cost makes it ideal when large numbers of sensors and/or long-term trending are required. Integration...

  • Model HSLIS-M50e - Liquid Particle Counter

    Model HSLIS-M50e - Liquid Particle Counter

    The High Sensitivity Liquid in Situ (HSLIS-M50e) Particle Counter provides continuous, real-time monitoring of contamination levels in de-ionized (DI). The HSLIS Liquid Particle Counter makes it easy to always understand the characteristics of your working fluid. The combination of high sensitivity and low cost makes it ideal when large numbers of sensors and/or long-term trending are required. Integration of the HSLIS Liquid Particle Counter into...

  • Model 1040, 1100, 1200, 1300, 1500, 2000 - Syringe Liquid Particle Sampler

    Model 1040, 1100, 1200, 1300, 1500, 2000 - Syringe Liquid Particle Sampler

    The SLS Syringe Sampling System uses a precision syringe and simple flow-path for delivering chemical samples from a sample vessel or chemical container, directly to the particle sensor. It is ideal for applications where precise, small-volume particle sampling is required, where the sampler device cannot contribute contamination to the chemical sample. The system consists of a selectable syringe for either corrosive or non-corrosive liquids,...

  • Model CLS-700 T - Corrosive Liquid Particle Sampler

    Model CLS-700 T - Corrosive Liquid Particle Sampler

    The CLS-700 T corrosive liquid sampler is a compression sampler combined with a LiQuilaz® particle counter for effective measurement of particles in fluids contained in unpressurized vessels. It is ideally suited for testing chemicals containing dissolved gas, where bubbles could be incorrectly detected as particles. The system eliminates bubbles by pressurizing the sample and keeping the bubbles suspended in solution.

  • Model APSS-2000 - Parenteral Particle Counter

    Model APSS-2000 - Parenteral Particle Counter

    When it comes to quality control for liquid drug manufacturers, it’s important to meet regulations while minimizing waste. The APSS-2000 Parenteral Particle Counter sizes and counts suspended particulate matter in a wide range of liquids, including parenterals, to meet all current U.S., European and Japanese...

  • Surfex - Parts Cleanliness Testing Station

    Surfex - Parts Cleanliness Testing Station

    The Surfex® Testing Station is a completely integrated ultrasonic tank that measures particle levels on almost any type of complexly shaped part. The Surfex Testing Station combines ultrasonic extraction, particle measurement, high-purity fluidics, and automated software control to reduce testing time, and therefore reduce the cost of parts testing. A wide range of options customizes the Surfex Testing Station for your unique...

  • Particle Sensor Safety Cabinet

    Particle Sensor Safety Cabinet

    Houses the chemical particle sensor, detects chemical leaks with an external alarm, and provides secondary containment when a leak occurs. In the event of a chemical leak within the chemical particle counter or sample connections, the system will automatically detect the leak, shut off inlet and outlet sample valves, turn off power to the particle sensor, and provide an external alarm contact.

  • Bubble Separator Device for Ultrapure Water and Chemical Systems

    Bubble Separator Device for Ultrapure Water and Chemical Systems

    The Bubble Separator from Particle Measuring Systems is a welded PFA device that allows entrained bubbles in an ultrapure water (UPW) or process chemical sample to separate from the sample stream through buoyancy, prior to the sample entering the liquid particle counter. The UPW or chemical sample 1) enters the middle of the bubble separator and 2) separates at the tee, with 3) the liquid sample exiting to the bottom port to the liquid particle...

  • Environmental Control Cabinet for Liquid Particle Sensors

    Environmental Control Cabinet for Liquid Particle Sensors

    The PMS Environmental Control Cabinet for the Ultra DI® 20 and Chem 20™ particle sensors is designed to produce the highest-precision particle data at 20 nm, for the cleanest ultrapure water and process chemical systems in the world. The special environmental control design enables temperature control to the required level of 22 - 28 °C + 1 °C/hour. For measuring particles as small as 20 nm, small environmental changes can impact...

  • Molecular Contamination Monitors (AMC)

  • AirSentry - Model II - Mobile AMC Detection System

    AirSentry - Model II - Mobile AMC Detection System

    Designed to enhance fixed Airborne Molecular Contamination (AMC) monitoring programs, the AirSentry II Mobile AMC Detection System is the first truly mobile system for monitoring airborne molecular contamination in cleanrooms. Mobility plays an important part in a strategic airborne molecular contamination monitoring program, allowing contamination sources to be quickly located, quantified and eliminated.

  • AirSentry - Model II - Multi-Point Monitoring System

    AirSentry - Model II - Multi-Point Monitoring System

    The AirSentry II Multi-point Monitoring System is the most advanced airborne molecular contamination (AMC) monitor available, utilizing sensitive and responsive ion mobility spectrometry to detect and characterize airborne molecular contamination from multiple locations within a cleanroom. The system features a 16- or 30-point manifold sampling system and an on-board computer with secure software and communications.

  • AirSentry - Model II - Point-of-Use Ion Mobility Spectrometer

    AirSentry - Model II - Point-of-Use Ion Mobility Spectrometer

    The AirSentry II family of ion mobility spectrometers for airborne molecular contamination (AMC) detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammonia-containing species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining Air Sentry II sensors with a central software platform...

  • AirSentry - Model II - Chlorides Point-of-Use Ion Mobility Spectrometer (IMS)

    AirSentry - Model II - Chlorides Point-of-Use Ion Mobility Spectrometer (IMS)

    The AirSentry II family of ion mobility spectrometers detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammoniacontaining species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining Air Sentry II sensors with a central software platform allows for easy data acquisition and analysis....