Pulsed Hydraulics, Inc.

5 Articles found

Pulsed Hydraulics, Inc. Articles

indicates free access

  • Castle Rock, Colorado Installations - Case Study

    Castle Rock, Colorado Installations - Case Study

    Mix a 37’ x 17’ lift station with an attached 12’ x 17’ lift station. PHI SOLUTION: PHI provided eight bubble forming plates located in the wet well pursuant to the CFD model. The system included one four-valve mixerwith ...

  • Monroe, Wisconsin Installations - Case Study

    Monroe, Wisconsin Installations - Case Study

    Mix a 130’ diameter EQ tank with an average of 14’ operating depth that contains cheese processing waste. SPECIAL REQUIREMENTS: The tank contents must be kept anaerobic with no more than .2 mg/L of D.O. The TSS must be no more than 10% ...

  • Reading, Pennsylvania Installations - Case Study

    Reading, Pennsylvania Installations - Case Study

    Mix a 15,000,000 gallon water reservoir (300’ diameter) to maintain equal temperature and chlorine residual throughout the reservoir. SPECIAL REQUIREMENTS: The system needed to be in its own all-weather outdoor enclosure. PHI SOLUTION: The ...

  • Indianapolis, Indiana Installations - Case Study

    Indianapolis, Indiana Installations - Case Study

    Maintain solids in suspension to prevent build-up in grit removal system for a dry weather flow of 70 MGD. SPECIAL REQUIREMENTS: The pulsed air mixing system is provided in JS101 B to suspend solids which settle out following grit removal so they ...

  • Tiffin, Ohio Installations - Case Study

    Tiffin, Ohio Installations - Case Study

    Mix three 25’ x 16’ x 18’ anoxic basins. SPECIAL REQUIREMENTS: TSS readings cannot exceed 10% variance from test stations located V from the top and V from the bottom. D.O. must not exceed .5 mg/L. PHI SOLUTION: Provide two ...