Pump Systems Ltd

25 products found

products

  • VAUGHAN – Centrifugal Chopper Pumps

    VAUGHAN – Centrifugal Chopper Pumps

    Quality manufactured in Montesano, USA by Vaughan Company, Inc., Vaughan chopper pumps are heavy-duty centrifugal pumps with the unique ability of chopping all incoming solids prior to pumping. They will chop and pump difficult solids laden wastewater and sludge that conventional cutter and grinder pumps cannot handle. These robust pumps will provide trouble free operation in the most severe pumping environments found in wastewater treatment plants...

  • EGGER – EO / EOS Process Pumps

    EGGER – EO / EOS Process Pumps

    The high-performance Egger EO / EOS range of process pumps are specially designed for handling a wide range of highly charged and demanding fluids, including abrasive, corrosive and viscous slurries and even multiphase suspensions. Egger EO / EOS process pumps have a long history in the pulp and paper industry where they can be found handling fibrous, air-entrained slurries with consistencies as high as 8% and gas contents of up to 25%.

  • RF Valve – High Performance Pinch Valves

    RF Valve – High Performance Pinch Valves

    The innovative RF Valve and aiRFlex Valve by RF Technologies, Inc. are high performance pinch valves designed for handling very difficult products and liquids that are abrasive, corrosive, dry and viscous that can cause clogging and blockage problems for most other valves.

  • CASTFLOW  - Ball Check Valves

    CASTFLOW - Ball Check Valves

    Castflow ball check valves are manufactured in Europe to the highest international standards and are a competitive alternative to other mainstream brands. With a full bore design to minimise restrictions and maximise flow, Castflow valves offer a low pressure drop and silent operation and are suitable for a wide range of applications.

  • ROTAMIX – Process Mixing Systems

    ROTAMIX – Process Mixing Systems

    Rotamix by Vaughan Company, Inc. is today’s most cost effective means of mechanical mixing available for digesters, sludge storage tanks and other high-volume applications. Combining both principles of uniform and vortical rotation, the unique “dual rotational zone” mixing pattern created by Rotamix eliminates dead spots, reduces energy consumption and prevents against the formation of scum mats and solids build up.

Products by Vaughan Company., Inc.

  • Chopper Pumps

  • Vertical Wet Well

    Vertical Wet Well

    Oil lubricated ball bearings eliminate unreliable sleeve bearings Capable of running dry for short periods

  • Recirculator Wet Well Pump

    Recirculator Wet Well Pump

    Easy above-deck access to valve and nozzle operators. Manual or fully automated operation available. Recirculation feat ure also mailable with Horizontal and Self-priming configurations

  • Model S Series - Electric Submersible Pumps

    Model S Series - Electric Submersible Pumps

    EXPLOSION PROOF MOTOR UL Listed Explosion Proof or non-Explosion Proof, with moisture sensor and tandem mechanical seals. Also available inContinuous In-Air or Close-Loop Cooled. CARTRIDGE SEALS Vaughan cartridge seal in lower housing. PUMP OUT VANES AND UPPER CUTTERKeeps pumpage away from the seal. OIL LEVEL MONITOR System constantly monitors oil level in the bearing housing. CAST ALLOY STEEL IMPELLER, CUTTER BAR, UPPER CUTTER AND CUTTER...

  • Specialty Products

  • Portable Bypass Trailer

    Portable Bypass Trailer

    The Vaughan Company now offers a series of portable pump package options that include our Dry Prime Horizontal End Suction Chopper Pumps in 3'-16' models, our Wet Prime Horizontal End-Suction Triton Screw Pumps in 3' to 12' models and our Wet Prime Self Priming Chopper Pumps in 4'-10' models. We have partnered with Premier Pump and Power to supply our pumps on a trailer or skid mounted platform powered by either a diesel engine or an electric drive....

  • Foambuster

    Foambuster

    The patented Foambuster uses the same glass-lined ductile iron nozzles as Rotamix but also uses a stainless steel splashplate located below the nozzle to deflect the nozzle discharge and create a broad spray of sludge, which wets and breaks up foam forming on the surface of the digester. Digester sludge is pumped through the Foambuster either by the Rotamix Chopper Pump or by a separate Chopper Pump. When the Foambuster is used in conjunction with a...

  • Floor Washer System

    Floor Washer System

    The patent pending Floor Washer System is the Foambuster nozzle/deflector as described above, but with the deflector rotated from below the nozzle to above the nozzle. The inverted splashplate spreads nozzle flow out across a floor in a fairly wide path to wash settled grit, sand or debris into a sump where it can be pumped out by a dewatering chopper pump. The Floor Washer System is particularly useful for attacking deposition problems in Combined...

  • Small Tank Mixing System

    Small Tank Mixing System

    Small tank mixing is a lower cost, simplified Rotamix system, using a Chopper Pump and external-mount nozzle assemblies. The external-mount nozzles are sandwiched between 6' ANSI flanges and provide fixed discharge angles off the tank wall. The nozzles can be made of light-weight 316SS or SCH40 steel with glass lining. These systems are ideal for FOG mixing (fats, oils, & grease) or for small food waste tanks which often use light weight...

  • Vortex  - Chopper

    Vortex - Chopper

    The Vortex Chopper is a combination of a cylindrical receiving vessel with a conical bottom connected through a large, 12” elbow to the suction of a Vaughan Chopper Pump. The pump discharges through Vaughan’s 3-way valve back to the receiving vessel for mixing and particle size reduction. Once the material in the receiving vessel has been thoroughly mixed, an operator can change the 3-way valve position to pump the slurry out to some other...

  • Turbo Mixer

    Turbo Mixer

    Vaughan’s Turbo Mixer is a propeller mixer mounted vertically inside an 18” elbow. This mixer has replaced many submersible propeller mixers which have experienced motor or gearbox failure due to fluid inleakage. The Turbo can mix a pit with only one foot of liquid above the floor, something a horizontal shaft submersible mixer cannot do.

  • Floating Prop Mixer

    Floating Prop Mixer

    Vaughan’s Floating Prop Mixer is a floating platform with an 8.5 ft long open propeller mixer mounted on it. The propeller mixer is mounted on the platform with a swivel mounting so that it can be rotated up for transporting or rotated down into the fluid for mixing. Pregrinder Fish KitIt has been used for mixing lagoons or open topped tanks when crusts develop. Units typically use 10-20 HP motors.

  • 3-Way Valve

    3-Way Valve

    The 3-Way Valve is available in 4”, 6” and 8” sizes and is available as a stand-alone valve or as part of a Vaughan submersible or vertical wet-well Chopper Pump. The valve is a non-plug design using a rotatable CD-4MCu valve disc to allow discharge out of either of the top ports. The Flow may even be split between the two ports. The valve cover provides dual discharge flanges; the valve body provides a single inlet flange. The valve...

  • Other Products

  • ROTAMIX - Hydraulic Mixing System

    ROTAMIX - Hydraulic Mixing System

    Vaughan's Rotamix system is the world's most reliable cost effective means of mechanical hydraulic mixing for sludge tanks, digesters and other high-volume applications.

  • Triton - Screw Centrifugal Pumps

    Triton - Screw Centrifugal Pumps

    Vaughan Company, with over 50 years of solids handling experience, introduces the Triton® screw centrifugal pumps, combining the benefits of Vaughan’s superior pump designs with the advantages of high efficient, non-clogging performance. The Triton screw centrifugal pump’s open channel impeller is ideal for handling thick sludges, large or stringy solids, shear sensitive fluids and delicate or highly abrasive materials.

  • Applications

  • Municipal Application

    Municipal Application

    Clarifier Scum. Vaughan Pumps handle both primary and secondary clarifier scum without plugging or air binding. The optional recirculator is available for both the Vertical Wet Well or Submersible pumps for large pits, or pits with long retention times, to allow pre-mixing of the stratified scum prior to pumpout. The oil bath bearing system allows complete pumpdown of the scum on each cycle.

Products by Salsnes Filter - a subsidiary of Danaher Corporation

  • Salsnes - Model SFK:600 - Filter Systems

    Salsnes - Model SFK:600 - Filter Systems

    A Salsnes Filter system combines three critical processes into one compact unit – solids separation, sludge thickening and dewatering. The rotating filtermesh removes >50% TSS, and >20% BOD from effluent and produces drier sludge (20-30% dry matter). It’s the only filter design that can replace conventional primary treatment and fulfill the EU regulations on primary treatment.

  • Salsnes - Model SF:2000 - Filter Systems

    Salsnes - Model SF:2000 - Filter Systems

    A Salsnes Filter system combines three critical processes into one compact unit – solids separation, sludge thickening and dewatering. The rotating filtermesh removes >50% TSS, and >20% BOD from effluent and produces drier sludge (20-30% dry matter). It’s the only filter design that can replace conventional primary treatment and fulfill the EU regulations on primary treatment.

  • Salsnes - Stand-Alone Dewatering Unit

    Salsnes - Stand-Alone Dewatering Unit

    To save space and money, the enclosed SF systems contain an integrated sludge thickening and dewatering process. Typical dewatering results are 20–30% DM. For larger installations, a stand-alone dewatering unit is available (shown below) to dewater sludge from multiple filters. It applies higher pressure to produce even drier sludge (20 –40% DM typical).

  • Programmable Logic Controller (PLC)

    Programmable Logic Controller (PLC)

    The Programmable Logic Controller (PLC) automates the system, making it ideal for remote or unstaffed locations. A sensor tells the PLC when to initiate filtermesh rotation which then automatically starts the Air Knife filtermesh cleaning system and sludge dewatering. The panel is rated IP65 and is located by the filter unit. Optional remote/control is available.

  • Salsnes - Knife Filtermesh Cleaning System

    Salsnes - Knife Filtermesh Cleaning System

    The built-in Air Knife is a patented filtermesh cleaning system that automatically cleans the rotating filtermesh using a blade of compressed air. Compared to scrapers, brushes or water-based cleaning systems, air is gentler on the mesh to prolong its life and keeps sludge drier for more effective dewatering.