RAECO / LESMAN

RAECO / LESMAN

483 products found

Products by

  • Gas Analysis - Sample Gas Probes

    Sample gas probes form a critical point between process and analysis system. They extract sample gas from the process stream and supply it to the analysis system. They should already remove undesirable particulates at the sampling point and avoid cold spots thus preventing false measurements. Our probes are easy to maintain without requiring a lot of tools. Their designs are suitable for critical ambient conditions such as explosive areas and provide weather protection.

  • Bühler - Model GAS 222.11 - Sample Gas Probe

    Bühler - Model GAS 222.11 - Sample Gas Probe

    Probe for blowback compatible in-situ filter for unheated gas sampling from processes with high dust load, including integrated safety filter. This filter can be replaced without tools.

  • Gas Analysis - Sample Gas Filters

    Even if the particles have already been removed at the extraction point through effective particle filtration inside the sample gas probe, there is still a risk of finer dust entering the measuring system. For this reason effective analysis filters are required, but also for use in simple or portable sample gas conditioners. These can be line filters or panel filters with housing made from various material combinations. Equipped with easy to change filter elements with various retention rate

  • Bühler - Model AHF-22 - Heated Sample Gas Filter

    Bühler - Model AHF-22 - Heated Sample Gas Filter

    Gas analysis is a complex field. The sample gas to be analysed must be extracted and handled under quite diverse conditions to yield representative and reliable analysis results. One disturbance variable which must also be eliminated is aerosols.

  • Bühler - Model K-AGF-PV-30-A - Sample Gas Coalescing Filter

    Bühler - Model K-AGF-PV-30-A - Sample Gas Coalescing Filter

    Gas analysis is a complex field. The sample gas to be analysed must be extracted and handled under quite diverse conditions to yield representative and reliable analysis results. One disturbance variable which must also be eliminated is aerosols.

  • Bühler - Model K-AGF-VA-23 - Coalescence Filter

    Bühler - Model K-AGF-VA-23 - Coalescence Filter

    Gas analysis is a complex field. The sample gas to be analysed must be extracted and handled under quite diverse conditions to yield representative and reliable analysis results. One disturbance variable which must also be eliminated is aerosols.

  • Bühler - Model RAF-PV-30 - Ambient Air Filter

    Bühler - Model RAF-PV-30 - Ambient Air Filter

    In ambient air monitoring (workshops, storage facilities, etc.) any particles and particular matter must be removed from the sample gas. The high quality ambient air filter RAF-PV-30 has a transparent housing to easily identify the contamination level. With the Bühler Unique quick-release fastener filter elements can be changed within minutes.

  • Bühler - Model AGF-PV-30 - Fine Mesh Filter

    Bühler - Model AGF-PV-30 - Fine Mesh Filter

    Even if the particular contaminant has already been removed at the extraction point through effective particle filtration inside the gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination.

  • Bühler - Model AGF-T-30 - Fine Mesh Filter

    Bühler - Model AGF-T-30 - Fine Mesh Filter

    Even if the particular contaminant has already been removed at the extraction point through effective particle filtration inside the gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination. Additional filters are therefore often installed at the point where the sample gas enters the analysis system and also before delicate system components.

  • Bühler - Model AGF-FE - Panel Filter

    Bühler - Model AGF-FE - Panel Filter

    Especially in emission control via portal analysis systems the sample gas cannot always be extracted without particle contamination. The necessary conditioning systems must be compact and lightweight and therefore require small and light system components.

  • Bühler - Model AGF-FE-4 - Panel Filter

    Bühler - Model AGF-FE-4 - Panel Filter

    In extractive emission monitoring the extracted sample gases are not only contaminated with particles but are often also corrosive. This requires particle filters made from particularly corrosion-resistant material combinations. The AGF-FE-4 panel filter was designed specifically for these applications in mobile emission monitoring.

  • Bühler - Model AGF-FA-5 - Panel Filter for Sample Gas Filter

    Bühler - Model AGF-FA-5 - Panel Filter for Sample Gas Filter

    Especially in emission control via portal analysis systems the sample gas cannot always be extracted without particle contamination. The necessary conditioning systems must be compact and lightweight and therefore require small and light system components. We offer special filter housings for these applications and for installation into a standard 19” rack. This filter is based on the AGF-FE-4 but features a...

  • Bühler - Model AGF-VA-23 - Fine Mesh Filter

    Bühler - Model AGF-VA-23 - Fine Mesh Filter

    Even if the particular contaminant has already been removed at the extraction point inside the through effective particle filtration gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination.

  • Bühler - Model AGF-VA-350 - Fine Mesh Filter

    Bühler - Model AGF-VA-350 - Fine Mesh Filter

    Even if the particular contaminant has already been removed at the extraction point inside the through effective particle filtration gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination.

  • Bühler - Model BF2-S - Ad-/Absorption Filter

    Bühler - Model BF2-S - Ad-/Absorption Filter

    Using so-called 'self-cleaning' gas filters is worth considering for sample gas systems where secondary contamination primarily consisting of larger particles are to be expected.

  • Gas Analysis - Sample Gas Pumps

    Sample gas analysis systems require sample gas pumps if the process pressure is not sufficient to transport an adequate volume of sample gas to the analysers reliably. The frequent corrosive and aggressive nature of the sample gas puts high demands on the properties of the material in contact with the media. The pumps should also be able to transport potential condensate.

  • Bühler - Model P1.1 - Sample Gas Pump

    Bühler - Model P1.1 - Sample Gas Pump

    Small, powerful sample gas pump for installation in analyser cabinets. With or without housing. The pump can also transport moist sample gas. Use in safe areas. Includes mounting materials, bypass valve optional. Available with (12) 24 V DC, 115 or 230 V AC 50/60 Hz power supply. Flow rate 280 L/h.

  • Bühler - Model P1.2 - Sample Gas Pump

    Bühler - Model P1.2 - Sample Gas Pump

    Small, powerful sample gas pump for installation in analyser cabinets. With or without housing. The pump can also transport moist and/or flammable sample gas. For installation in safe areas only. Includes mounting materials, bypass valve optional. Available with (12) 24 V DC, 115 or 230 V AC 50/60 Hz power supply. Flow rate 280 L/h.

  • Bühler - Model P1.3 - Sample Gas Pump

    Bühler - Model P1.3 - Sample Gas Pump

    Small, powerful sample gas pump for installation in analyser cabinets. With or without housing. The pump can also transport moist sample gas. For use in Atex and IECEx Zone 2. FM C-US approved for Atex, IECEx, Cl.1, Div.2. Includes mounting materials, bypass valve optional. Available with (12) 24 V DC, 115 or 230 V AC 50/60 Hz power supply. Flow rate 280 L/h.

  • Gas Analysis - Sample Gas Coolers - Electric Gas Coolers

    Peltier coolers for ambient temperatures up to 50°C. Compressor gas coolers with different performance ratings with up to 4 gas paths. Atex approved electric gas coolers.

  • Bühler - Model TC-Mini Series - Gas Cooler

    Bühler - Model TC-Mini Series - Gas Cooler

    A compact semi-conductor cooler, preferably for installation in portable or small gas conditioning systems. One gas path with plug-in heat exchanger, 24 V DC power supply. In spite of the compact size it has a high capacity and is therefore also suitable for warm climates.

  • Bühler - Model TC-Standard Series - Gas Cooler

    Bühler - Model TC-Standard Series - Gas Cooler

    Base unit in a powerful series of semi-conductor coolers with one or two gas paths. Plug-in heat exchanger in various materials for optimum adaptation to operating conditions. Available with 24 V DC, 115 V AC or 230 V AC power supply. Extensive range of direct-mount accessories.

  • Bühler - Model TC-Standard+ Series - Gas Cooler

    Bühler - Model TC-Standard+ Series - Gas Cooler

    Powerful semi-conductor cooler with one gas path and optimised heat exchanger for critical applications in emission monitoring. Available with 24 V DC, 115 V or 230 V AC power supply. Extensive range of direct-mount accessories.

  • Gas Analysis - Sample Gas Coolers - Condensate Removal

    The moisture separated in the sample gas cooler turns into condensate and needs to be removed from the system. Depending on the composition of the sample gas the condensate can be corrosive and/or toxic. No external air may enter the measuring system through the drain to prevent false measurements. Depending on the design of the analysis system the condensate can be either drained from the system automatically or using self-sealing pumps. We offer appropriately equipped vessels for proper co

  • Bühler - Model CPsingle, CPdouble - Peristaltic Condensate and Metering Pumps

    Bühler - Model CPsingle, CPdouble - Peristaltic Condensate and Metering Pumps

    Condensate accumulates most probably while wet sample gas is processed through a conditioning system. On one hand this may occur inadvertently if thermal bridges occur in the sample gas lines. On the other hand the deposit of moisture is necessary to protect the measuring cells in the analyser from damage and/or stabilise measurements.

  • Gas Analysis - Sample Gas Coolers - Moisture Monitoring

    In extractive gas analysis the sample gas must be conditioned before it enters the measuring cell of the analyser. One of these conditioning stages is moisture condensing in so-called sample gas coolers. However, since the composition of the sample gas and the process parameters can fluctuate, condensate slip downstream from the cooler cannot be entirely ruled out. Moisture detectors installed in the cooler output indicate such slip. The detectors are extremely sensitive so fault conditions

  • Bühler - Moisture Detector

    Bühler - Moisture Detector

    In extractive gas analysis the sample gas must be conditioned before it enters the measuring cell of the analyser. One of these conditioning stages is moisture condensing in so-called sample gas coolers. However, since the composition of the sample gas and the process parameters can fluctuate, condensate slip downstream from the cooler cannot be entirely ruled out. Moisture detectors installed in the cooler output indicate such slip. The detectors are...

  • Gas Analysis - Sample Gas Coolers - Precoolers

    Very humid processes may require the use of a precooler prior to the main cooler. This reduces the load on the actual sample gas cooler lowering energy consumption.

  • Bühler - Model TS 10 - Precooler

    Bühler - Model TS 10 - Precooler

    The goal is to not allow the moisture in the sample gas to condense in the analyser. At the core of the cooling system is a heat exchanger cooled by fans, using convection. The version with glass-lined heat exchangers is suitable for corrosive components. The separated condensate is drained via peristaltic pump.

  • Gas Analysis - Sample Gas Coolers - Water Coolers/Gas Scrubbers

    Instead of electric sample gas coolers, scrubbers and water coolers may be used for specific applications. The following models describe the basic versions.

  • Bühler - Model 170 IST and 170 IST - Titanium Water Cooler

    Bühler - Model 170 IST and 170 IST - Titanium Water Cooler

    Sample gas is transported through a tube coil inside an outer shell water flows through. The condensate outlet is located at the bottom of the unit, along with a thermometer (not applicable to titanium version) which displays the gas outlet temperature. Model 170 IST Titanium is entirely made from titanium.

  • Gas Analysis - Flow Meters---

    Reliable analysis results require consistent operating conditions. This also includes setting the flow rate and monitoring accurately. As with all other assemblies in contact with media the focus in suitable flow meters is on selecting highly durable materials and easy maintenance. Inductive limit switches and suitable controllers allow the flow meter meters to be integrated in the system controls.

  • Bühler - Model SM-6 - Flow Meter Controllers

    Bühler - Model SM-6 - Flow Meter Controllers

    Series developed specifically for gas analysis applications. Available with or without built-in needle valve. The metering tube can be removed without tools and without removing the flow meter from the installation site. The units come ready to install, no additional installation materials required.

  • Bühler - Controllers

    Bühler - Controllers

    We offer various switch amplifiers for connecting the limit switches to flow meters. These may only be installed outside explosive areas and have a number of additional safety or monitoring functions.

  • Bühler - Model S-SM - Safety Flow Meter

    Bühler - Model S-SM - Safety Flow Meter

    Critical applications may require a higher degree of safety for the metering tube. The S-SM flow meter was designed for these critical applications: A safety cylinder and the actual metering tube in contact with the media are housed coaxially inside a steel casing with window. This reduces the potential hazard significantly.

  • Gas Analysis - NOx Converter

    In order to protect human beings and the environment, the emission of nitric oxides must be reduced and monitored. To allow the use of cost-effective analysis methods, e.g. infrared technology for monitoring the NO2 rate in the emitted gas must be catalytically converted to NO. This is achieved by using electrically heated small reactors filled with various catalyst materials for different applications. Energy-efficient operation of these NOx converters requires the ope

  • Bühler - Model BÜNOx 2+ - Gas Converter

    Bühler - Model BÜNOx 2+ - Gas Converter

    In order to protect humans and the environment, the emission of nitric oxides must be reduced as much as possible. In order to use cost-effective gas analysis methods, such as infrared technology for the monitoring technology, the NO2 rate in the emitted gases must be catalytically converted to NO.

  • Gas Analysis - Gas Analysers

    Our over 45 years of experience in gas analysis was used as a basis for a select line of gas analysers. The product line includes easy to maintain in-situ / “Closed-coupled extractive” analysers with ZrO2 cells and units for extractive analysis systems. Portable analysers are for example used in the food industry, completing our product range. Our single and multi-channel analysers designed for extractive applications in process and emissions measurement can be equippe

  • Bühler - Model BA 1LT - Zirconia Oxygen Analyser

    Bühler - Model BA 1LT - Zirconia Oxygen Analyser

    The BA 1LT oxygen analyser is designed to determine concentrations of residual oxygen content in flue gas of furnaces (max. 350 °C/662 °F) and to measure the oxygen concentration in air and inert gas mixtures (N2, CO2, noble gases). Its strengths further include use in hard to reach areas and in self-contained systems (ventilation pipes, containers, etc.).

  • Bühler - Model BA 2000 - Oxygen Flue Gas Analyser

    Bühler - Model BA 2000 - Oxygen Flue Gas Analyser

    Some combustion processes, e.g. process heaters, steam boilers or heating furnaces the air required to achieve optimal system efficiency can easily fluctuate. And the economic optimum of the process fluctuates within a relatively narrow range.

  • Bühler - Model BA3 Select - Multi Component Gas Analyser

    Bühler - Model BA3 Select - Multi Component Gas Analyser

    The BA 3 select is a gas analyser for 19' rack mounting with a modular design which can be upgraded ranging from the simplest oxygen- to multi component gas analyser. This allows for up to four gas components to be measured simultaneously.

  • Gas Analysis - Portable Probes & Gas Conditioning Systems

    In addition to stationary analysers, gas analysis for monitoring emissions also uses portable methods. The actual measuring task determines the complexity of the sampling and gas conditioning units and analysers. Since not all control points are easy to access, operators are interested in suitable and light equipment with a small packing size. Even under these premises, extracting the sample gas must meet high standards to ensure the measurements are reliable.

  • Bühler - Model PCS.base - Portable Gas Conditioning

    Bühler - Model PCS.base - Portable Gas Conditioning

    In addition to stationary analysers, gas analysis for monitoring emissions also uses portable methods. The actual measuring task determines the complexity of the sampling/analysis units. Since not all control points are easy to access, operators are interested in suitable and light equipment with a small pack size.

  • Bühler - Model Type Baseline - Portable Probe

    Bühler - Model Type Baseline - Portable Probe

    In addition to stationary analysers, gas analysis for monitoring emissions also uses portable methods. The actual measuring task determines the complexity of the sampling/analysis unitsl.

  • Gas Analysis - Particle Monitoring

    The user-friendly BDA series particle monitors are high quality systems for monitoring dust filters and separators. Monitoring and diagnosing dust leaks makes filtration system service predictable for active filter management. Depending on the version the units can be calibrated, and the measurement can be displayed in mg/m3. Approved technology according to TA Luft. For fine dust monitoring, network-compatible compact monitors are available.

  • Bühler - Model BDA 02 - Particle Monitor

    Bühler - Model BDA 02 - Particle Monitor

    In many production and thermal processes the process- or exhaust air also contain dust particles of various sizes. To ensure this dust does not enter the environment unchecked, they are separated or retained using suitable filter systems.

  • Bühler - Model BDA 02 EX - Particle Monitor

    Bühler - Model BDA 02 EX - Particle Monitor

    In many production and thermal processes the process- or exhaust air also contain dust particles of various sizes. To ensure this dust does not enter the environment unchecked, they are separated or retained using suitable filter systems.

  • Bühler - Model BDA 15 - Fine Dust Monitor

    Bühler - Model BDA 15 - Fine Dust Monitor

    Regardless of the emitter, fine dust particles hazardous for people and the environment. Particles in the submicron range can enter the respiratory tract and are hazardous to the health, regardless of the substance. A number of directives and standards, such as DIN EN 481, require monitoring the surrounding atmosphere.

  • Gas Analysis - Complete Systems

    We supply modular 19” systems for one or multiple gas paths, as well as custom analysis systems. Additionally we supply mobile or stationary conditioning systems with integrated analysers as an option. For emissions testing Bühler offers a DIN EN15267-3 approved modular system which is suitable for different measuring tasks in various applications.

  • Bühler - Model SCS 19 - Modular Compact System

    Bühler - Model SCS 19 - Modular Compact System

    In gas analysis it’s important to condition gas before feeding it into the analyser. This requires components such as gas cooler, gas pump, filter, condensate pump and flow meter. Additional functions - e.g. feeding calibrating gasses - may be required depending on the application.

  • Buhler - Model MAS - Mobile Analysis System

    Buhler - Model MAS - Mobile Analysis System

    Precise measurement of gasses in various locations or even sites requires a suitable analyser and reliable sample gas conditioning. Both must be relatively simple and most importantly allow safe and protected transport to the sampling site.

  • Fluidcontrol - Liquid Level Monitoring - Tank Top Installation Multifunctional

    Multifunctional Liquid Level/Temperature/Ventilation/Return Filtration Oil tanks in hydraulic and lubrication systems must provide specific basic functions for proper operation. This includes a suitable filling port for a safe and clean filling of the oil, a qualified air breather to prevent the penetration of any ambient air contaminants in the event of level fluctuations, a tank top return filter to keep the oil clean, liquid level monitoring to control operational

  • Bühler - Model FC - Breather /Filler With Level And Temperatur Control Fluidcontrolterminal

    Bühler - Model FC - Breather /Filler With Level And Temperatur Control Fluidcontrolterminal

    In the connection schematic of an air breather as per DIN 24557 T2, this device provides all essential features for oil tanks within the smallest space for systems, which require an individual selection of the size of the tank top return filter. The compact design reduces the space requirements, installation and procurement costs and facilitates routine maintenance.

  • Bühler Nivotemp - Model NT 67-XP - Level and Temperature Switch

    Bühler Nivotemp - Model NT 67-XP - Level and Temperature Switch

    In hydraulics and lubrication technology the liquid level of oil tanks must be monitored continuously. In the process, modern factory automation requires the provision of compatible signals. Despite central system control, visualising the current level on the actual tanks is often desired.

  • Bühler Nivotemp - Model NT 63 - Level or Level and Temperature Sensor

    Bühler Nivotemp - Model NT 63 - Level or Level and Temperature Sensor

    In hydraulics and lubrication technology the liquid level of oil tanks must be monitored continuously. In the process, modern factory automation requires the provision of compatible signals. To minimise production costs and the space required on tanks, it makes sense to use one monitoring device for both the monitoring of the liquid level and oil temperature for example. The Nivotemp series meets virtually all requirements arising in this area...

  • Bühler Nivotemp - Model NT-M/NT-MD - Level And Temperature Switch

    Bühler Nivotemp - Model NT-M/NT-MD - Level And Temperature Switch

    In hydraulics and lubrication technology the liquid level of oil tanks needs to be monitored. Here, modern factory automation requires compatible signals. The Nivotemp M series features a group of devices for both monitoring the liquid level as well as the level and temperature in hydraulic or lubrication units.

  • Fluidcontrol - Liquid Level Monitoring - Tank Top Installation

    These devices equipped with dynamic floats serve liquid level monitoring (as multifunctional devices for the simultaneous monitoring of liquid level, temperature and ventilation) in oil tanks for hydraulic and lubrication systems. They are mounted on the tank top and extend directly into the hydraulic fluid or lubricant. Each of the following series offer the user specific advantages and features up to the extreme consolidation of functions in the Multiterminal.

  • Fluidcontrol - Liquid Level Monitoring - Tank Top

    Combinations of visual liquid level displays and electrical contact/sensors for installation on tank tops, also suitable for contaminated media.

  • Bühler - Model NS-OM-61 - Level Switch

    Bühler - Model NS-OM-61 - Level Switch

    The level switches in the NS OM-xx series are used to monitor liquid levels in tanks. These level switches are designed to be installed on tank tops. The liquid level can be read on the scale. Up to four switching contacts enable liquid level monitoring.

  • Bühler - Model NS-OM-63 - Level Switch

    Bühler - Model NS-OM-63 - Level Switch

    In some applications for the monitoring of liquid levels in oil tanks, a visual display of the tank level is required in addition to the output of electrical signals. Depending on the application and design of the tank, merely the tank top can be used to install the monitoring devices and more often than not, only with limited available space for installation.

  • Bühler - Model NS-OM-64-EasyJust - Level switch

    Bühler - Model NS-OM-64-EasyJust - Level switch

    In some applications for the monitoring of liquid levels in oil tanks, a visual display of the tank level is required in addition to the output of electrical signals. Depending on the application and design of the tank, merely the tank top can be used to install the monitoring devices and more often than not, only with limited available space for installation.

  • Fluidcontrol - Liquid Level Monitoring - External Tank Installation Bypass

    A combination of visual liquid level displays and electrical contact/sensors, also for applications in pressurised tanks/accumulators. Available in various pressure ratings.

  • Bühler - Model NS 10/ NS 25 ...-AM (-K) - Level Switch

    Bühler - Model NS 10/ NS 25 ...-AM (-K) - Level Switch

    Visual/electrical liquid level monitoring for external installation using DIN flange. Pressure ranges up to 10 or 25 bars (145 or 363 psi). Adjustable switching contacts up to 230 V and/or continuous analogue output 4-20 mA optional.

  • Bühler - Model NS 64/100 ... AM - Level Switch

    Bühler - Model NS 64/100 ... AM - Level Switch

    Visual/electrical liquid level monitoring for external installation using DIN flange. Pressure range up to 64 or 100 bars (943 or 1450 psi). Adjustable switching contacts up to 230 V and/or continuous analogue output 4-20 mA optional.

  • Fluidcontrol - Temperature Monitoring

    Temperature switches and sensors for the measurement and monitoring of the operating temperature. Local or remote display with programmable outputs.

  • Bühler Thermotronik - Model TT-77 - Temperature Sensors

    Bühler Thermotronik - Model TT-77 - Temperature Sensors

    Temperature monitoring combined as local or remote display. The display unit has a menu structure following the VDMA (German Mechanical Engineering Industry Association) standard specification 245741 and provides freely programmable as well as continuous signals. The remote display is designed for simple rail mount installation.

  • Bühler - Model MK2-G1/2/ EK2-G1/2 - Temperature Sensors

    Bühler - Model MK2-G1/2/ EK2-G1/2 - Temperature Sensors

    Analogue output 4-20 mA. Continuous temperature measurement. Nearly any length of cable connection between sensor and control unit. Sensor length up to 1 m / 3.3 ft. Brass or stainless steel housing. Various plug options.

  • Fluidcontrol - Pressure Monitoring

    Pressure monitoring in hydraulic systems is a parameter for the transmitted power. In lubrication systems, the monitoring of the system pressure indicates whether all lubrication points of the system are being sufficiently provided with lubricant. Traditionally, conventional pressure switches, where metering points and displays are separated, transmitters and displays are connected by pipes or hoses. Bühler’s pressure measurement technology eliminates these connections and replace

  • Gas Analysis - Sample Gas Coolers

    Many areas applying extractive gas analysis or dry basis measurement systems such as air emission testing equipment, CEM monitoring and stack test equipment, EPA method test equipment, process gas analysis and others, the sample gas needs to be ‘dried’ before it is fed into the analyser.

  • Bühler - Model EGK 1/2 - Sample Gas Cooler

    Bühler - Model EGK 1/2 - Sample Gas Cooler

    In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is key for safe and efficient control of process flows, environmental protection, and quality assurance.

  • Bühler - Model EGK 1SD - Sample Gas Cooler

    Bühler - Model EGK 1SD - Sample Gas Cooler

    EGK series compressor sample gas coolers feature a construction design which ensures they maintain an extremely stable gas outlet dew point. At the core of this cooler is a cooling block which, along with the sophisticated Bühler constant control system, ensures even heat dissipation. The cooling system is charged with CFC-free refrigerant and is maintenance-free.

  • Bühler - Model EGK 4S - Sample Gas Cooler

    Bühler - Model EGK 4S - Sample Gas Cooler

    EGK series compressor sample gas coolers feature a construction design which ensures they maintain an extremely stable gas outlet dew point. At the core of this cooler is a cooling block which, along with the sophisticated Bühler constant control system, ensures even heat dissipation. The cooling system is charged with CFC-free refrigerant and is maintenance-free.

  • Bühler - Model EGK 10 - Sample Gas Cooler

    Bühler - Model EGK 10 - Sample Gas Cooler

    The basic components of the EGK 10 correspond to the EGK 4 series, however features a higher cooling capacity and large flow rates, optimised specifically for bypass applications. It uses a special size high-efficiency heat exchanger.

  • Bühler - Model EGK 2-19 - Sample Gas Cooler

    Bühler - Model EGK 2-19 - Sample Gas Cooler

    In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is key for safe and efficient control of process flows, environmental protection, and quality assurance.

  • Bühler - Model PKE 5 - Sample Gas Cooler

    Bühler - Model PKE 5 - Sample Gas Cooler

    The PKE Models feature a semiconductor Peltier cooling system with an aluminum cooling block. Fitted into the block are one or two removable high efficient heat exchanger made of stainless steel, DURAN-glass or PVDF.

  • Bühler - Model PKE 52 - Sample Gas Cooler

    Bühler - Model PKE 52 - Sample Gas Cooler

    The PKE 52 is the most powerful Peltier cooler in our series. Our quality heat exchangers are available in various materials like stainless steel, Duran glass or PVDF are available as well as one or two gas paths.

  • Bühler - Model EGK 2A Ex - Sample Gas Cooler

    Bühler - Model EGK 2A Ex - Sample Gas Cooler

    This gas cooler was designed specifically for use in explosive areas. It features a high performance compressor cooling system which ensures an extremely stable gas output dew point, even in ambient temperatures up to +45 °C.

  • Bühler - Model GL 1-3 - Condensate Vessels

    Bühler - Model GL 1-3 - Condensate Vessels

    In sample gas conditioning systems which cannot be pressurised, condensate accumulating in the sample gas coolers must be removed with peristaltic pumps or collected in condensate traps.

  • Bühler - Model CV-3, CV-6, CV-10 - Condensate Vessel

    Bühler - Model CV-3, CV-6, CV-10 - Condensate Vessel

    In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is key for safe and efficient control of process flows, environmental protection, and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or...

  • Bühler - Model TC-MIDI Series - Gas Cooler

    Bühler - Model TC-MIDI Series - Gas Cooler

    In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is key for safe and efficient control of process flows, environmental protection, and quality assurance.

  • Bühler - Model TC-Double Series - Gas Cooler

    Bühler - Model TC-Double Series - Gas Cooler

    In the chemical industry, petrochemistry or biochemistry,reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is key for safe and efficient control of process flows, environmental protection and quality assurance

  • Bühler - Model TC-Double+ Series - Gas Cooler

    Bühler - Model TC-Double+ Series - Gas Cooler

    In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is key for safe and efficient control of process flows, environmental protection, and quality assurance.

  • Gas Analysis - Flow Meters

    Reliable analysis results require consistent operating conditions. This also includes setting the flow rate and monitoring accurately. As with all other assemblies in contact with media the focus in suitable flow meters is on selecting highly durable materials and easy maintenance. Inductive limit switches and suitable controllers allow the flow meter meters to be integrated in the system controls.

  • Bühler - Model SM-6 / SM-6-V - Switch Amplifiers

    Bühler - Model SM-6 / SM-6-V - Switch Amplifiers

    We offer various switch amplifiers for connecting the limit switches to flow meters. These may only be installed outside explosive areas and have a number of additional safety or monitoring functions.

  • Gas Analysis - Gas Analysers

    Our over 45 years of experience in gas analysis was used as a basis for a select line of gas analysers. The product line includes easy to maintain in-situ / “Closed-coupled extractive” analysers with ZrO2 cells and units for extractive analysis systems. Portable analysers are for example used in the food industry, completing our product range. Our single and multi-channel analysers designed for extractive applications i

  • Buhler - Model BA 1000 - Zirkonia Oxygen Analyser

    Buhler - Model BA 1000 - Zirkonia Oxygen Analyser

    The Buhler Model BA1000 solid-state oxygen analyser has been developed for in-situ applications. The cell is self-controlling and therefore well- suited for applications in flue gas or similar matrices.

  • Bühler - Model BA 4S - Portable O2 and CO2 Analyser

    Bühler - Model BA 4S - Portable O2 and CO2 Analyser

    The BA 4S is a high performance O2 and CO2 gas analyser you can really depend on. With easy and intuitive operation and single or dual O2/CO2 measurement functions, BA 4S is ideal for a wide range of measurement applications.

  • Bühler - Model BA 4000 Injection - Oxygen Headspace Analysis

    Bühler - Model BA 4000 Injection - Oxygen Headspace Analysis

    The portable Bühler O2 analyser BA 4000 Inj. is a special unit for determining oxygen in low gas volumes. This analyser is a modification of the BA 4000, primarily used in the food industry to analyse small residual amounts in modified atmosphere packaging, bottles, or tins. The O2 content in insulating glass panes can also be determined.

  • Bühler - Model BA 4510 - Portable Trace O2-Analyzer

    Bühler - Model BA 4510 - Portable Trace O2-Analyzer

    The portable analyser BA 4510 is used to measure traces of oxygen in inert gas. At the core of this unit is a tried and tested, maintenance-free zirconium dioxide measuring cell. This oxygen-ion conductor combines the advantage of high selectivity with high mechanical stability and consistency.

  • Bühler - Model BA 5000 - Gas Analyser for IR-Sensitive Gases and Oxygen

    Bühler - Model BA 5000 - Gas Analyser for IR-Sensitive Gases and Oxygen

    The BA 5000 gas analyser is suitable to continuously measure gas concentrations, e.g. CO, CO2, NO, SO2, CH4. The analyser can measure up to three of these components plus O2 at the same time. For oxygen analysis purposes the BA 5000 can optionally be equipped with electrochemical or paramagnetic cell. This gas analyser can be used in emission measurement equipment as well as for monitoring processes and safety. TÜV-approved versions of...

  • Bühler - Model BA 6000 O2 - Oxygen Analyser

    Bühler - Model BA 6000 O2 - Oxygen Analyser

    The BA 6000 O2 gas analyser uses the paramagnetic alternating pressure method and is used to measure oxygen in gas mixtures. The analyser may only be used in non-explosive areas.

  • Bühler - Model BA 6000 IR - NDIR Gas Analyzer - Single or Dual Channel Version

    Bühler - Model BA 6000 IR - NDIR Gas Analyzer - Single or Dual Channel Version

    The BA 6000 IR gas analysers use the NDIR dual stream push-pull principle and highly selectively measure gases with absorption bands in the infrared wave range of 2 to 9 μm, e.g. CO, CO2, NO, SO2, NH3, H2O, CH4, and other hydrocarbons. Single channel units measure one gas component. Dual channel units measure two separate gas components simultaneously. The units are designed for use in non-explosive areas.

  • Fluidcontrol - Level - External Installation

    The monitoring of liquid level particularly in high reservoirs, in pressure vessels as accumulators or in large gear boxes usually requires the external installation of level controls. These are normally connected to the lowest point of the vessel by fittings or flanges and in most cases also have connections to the space above the liquid level. Alternatively the controls must be open towards ambient atmosphere to allow the fluid to communicate without restriction.

  • Model NS10/NS25..AM - Level switch

    Model NS10/NS25..AM - Level switch

    Cost effective solution for by-pass level controls. Visual and electrical level control. Adjustable level contacts. Good visibility from different angles. Options with tube fitting or flange connection, also with continous analog signal output, usinkable float, operating pressure up to 10 bar.

  • Model NS64/NS100..-AM - Level Switch

    Model NS64/NS100..-AM - Level Switch

    Universal by-pass level control for reservoirs of any style and for gear boxes. Visual and electrical level control. Adjustable level contacts. Good visibility from different angles. Rugged design for a pressure range up to 64 bar,also with continous analog output and additional contacts possible.

  • Model HD NS 250-AM-G1-V/ H NS360-AM-G1-V - Level Switch

    Model HD NS 250-AM-G1-V/ H NS360-AM-G1-V - Level Switch

    Up to 360 bar operating pressure. TÜV approval standard. Unsinkable float. Visual and electrical level control. With valves. Unit for high pressure water hydraulics, also with continous analog output signal available.

  • Fluidcontrol - Temperature

    Temperature switches and sensors for the measurement and monitoring of the operating temperature. Local or remote display with programmable outputs.

  • Fluidcontrol - Display And Control Units

    Complex systems require the acquisition and display of relevant operation parameters at a central location. This is done by using large screens or by grouping a number of controllers at a good visible point in a large assembly.