Rotork plc

36 products found

Rotork plc Products

  • Fluid Power Actuators

  • Rotork - Model PM/DM Series - Rotary Pneumatic Damper Drives

    Rotork - Model PM/DM Series - Rotary Pneumatic Damper Drives

    Rotork Type K rotary pneumatic damper drives are offered in two basic configurations; the PM Series (Pedestal Mount) and the DM Series (Direct Mount). Both Series provide accurate quarter-turn control to dampers on combustion air and flue gas applications. They offer modulating control, isolation open / close control and bus network control to fit your operating needs.

  • Rotork - Model FasTraK Series - Retrofit Damper

    Rotork - Model FasTraK Series - Retrofit Damper

    The Type K FasTraK retrofit damper drive has been pre-designed to provide a ready-made product to replace common, older legacy damper drives. After decades of damper drive retrofit, Type K has narrowed and refined the highest volume Series PM (Pedestal Mount) rotary damper drives to provide a Quick Ship upgrade solution. Experience maximum boiler performance with new Type K FasTraK damper drives.

  • Rotork - Model K-Tork - Vane Actuators

    Rotork - Model K-Tork - Vane Actuators

    The K-TORK Range of high-performance true rotary vane actuators are used in critical applications commonly found in most process industries. Located in Dallas, Texas, USA, K-TORK products are supplied through the global network of Rotork offices and Rotork agents and K-TORK distributors in the USA. K-TORK actuators + controls are versatile, modular and available in both double-acting and spring-return models. They are used to operate ball, butterfly or...

  • Rotork - Model JR Series - Type K Damper Drive

    Rotork - Model JR Series - Type K Damper Drive

    The JR Series was designed specifically for wall-fired boilers with burners using a combination of fuel and combustion air. The JR Series controls the secondary air that is introduced at the burner and the air/fuel ratio is regulated by a sliding-sleeve damper to balance the air flow distribution. The JR Series offers ‘split architecture’ with the Power cylinder and the DPC-777 positioner mounted separately to remove sensitive...

  • Rotork - Model LX Series - Pneumatic Linear Damper Drive

    Rotork - Model LX Series - Pneumatic Linear Damper Drive

    The LX Series pneumatic linear damper drive is proven to be the most reliable, robust and premium quality drive for severe duty applications. A properly specified LX Series is capable of operating for millions of cycles in harsh applications with little or no maintenance.

  • Model K-Tork - Pneumatic Vane Actuator

    Model K-Tork - Pneumatic Vane Actuator

    K-TORK Actuators + Controls represents the future of valve automation. The vane actuator is a ‘True Rotary’ actuator that does not require the conversion of a linear motion to a rotary motion. The result is a simple, highly accurate and reliable quarter-turn pneumatic actuator that is specified for the most demanding process flow control applications.

  • Rotork - Model K-TORK - Air Fail-Safe Actuator

    Rotork - Model K-TORK - Air Fail-Safe Actuator

    K-TORK Air Fail-Safe actuators incorporate an integral air reservoir to fail valve in desired position upon loss of air pressure, electrical power, or both. Available for general purpose or hazardous area classification installations.

  • Rotork - Model K-TORK - Handwheel Manual Override

    Rotork - Model K-TORK - Handwheel Manual Override

    K-TORK offers a de-clutch gearbox manual override that mounts between the actuator and the valve to provide for manual valve operation in the event of air failure or for emergency operation. Under normal automatic operation, the gear is disengaged and the actuator turns freely to operate the valve.

  • Rotork - Model CP Range - Pneumatic Actuators

    Rotork - Model CP Range - Pneumatic Actuators

    CP range pneumatic actuators are a versatile, modular, scotch yoke design available in both double-acting and spring-return configurations. The compact and efficient design yields high torques even at low pressures. The design concepts found in Rotork's large, heavy-duty actuators has been applied to the CP range, which brings heavy-duty actuator qualities to small, quarter-turn actuators.

  • Rotork - Model GP/GH - Heavy-duty Scotch Yoke Actuators

    Rotork - Model GP/GH - Heavy-duty Scotch Yoke Actuators

    GP (pneumatic) and GH (hydraulic) range scotch yoke actuators are designed to provide a rotary, quarter-turn movement for either on/off or modulating duty. The rugged yet compact design is available with two different yoke designs. The classic symmetric yoke delivers peak torque at both ends of stroke. Alternatively, they can be supplied with canted torque arms designed to deliver peak torque at only one end of stroke. Use of canted arms can often...

  • Rotork - Model LP/LH - Linear Actuators

    Rotork - Model LP/LH - Linear Actuators

    Rotork linear actuators offer the advantages of compact size, high performance and a simple but highly reliable design. They are ideal for operating on/off and control functions of both globe and wedge gate valves. Both spring-return and double-acting configurations are...

  • Rotork - Model RH Range - Heavy-duty Rack and Pinion Actuators

    Rotork - Model RH Range - Heavy-duty Rack and Pinion Actuators

    Rack and pinion actuators often offer the most economical solution for quarter-turn valves that have a fairly constant torque requirement throughout the stroke. RH (hydraulic) actuators are available in five body sizes to produce torque output up to 3,700 Nm (29,900 lbf.in) at operating pressures up to 250 bar (3,600 psi). They are available in either

  • Rotork - Model GO Range - Gas-Over-Oil Actuators

    Rotork - Model GO Range - Gas-Over-Oil Actuators

    The gas-over-oil range of pipeline actuators are designed to use pipeline gas as the motive power source. They utilise our robust GH and RH quarter-turn prime movers and are field proven in installations around the world. Control configurations are available to meet virtually any operational requirements.

  • Rotork - Model ELB - Line Break Detection System

    Rotork - Model ELB - Line Break Detection System

    Rotork’s ELB (Electronic Line Break) is a robust self-contained electronic pipeline monitoring system designed for use in the gas & oil industry. It will continuously monitor pipeline pressure dynamics to provide early detection of pipeline breaks and initiate automatic valve actuator movement to an emergency position based upon user-defined parameters. The powerful and versatile system can also collect detailed operational data useful for...

  • Rotork - Model HPG Range - Pipeline Actuators

    Rotork - Model HPG Range - Pipeline Actuators

    The HPG range of pipeline actuators are designed to use pipeline gas as the motive power source. They utilise our robust scotch yoke mechanism field proven the world over in all types of fluid power applications. Manual override is a standard feature of the range. Our design incorporates a separate cylinder for hydraulic override to ensure complete separation of high-pressure pipeline gas from the hydraulic fluid. The use of an independent override...

  • Skilmatic - Model SI Range - Self Contained Actuators

    Skilmatic - Model SI Range - Self Contained Actuators

    The Skilmatic range of actuators offer a unique and reliable solution for electric fail-safe and modulating control for both quarter-turn and linear valves and dampers. They combine the simplicity of electrical operation with the precision of hydraulic control and the reliability of mechanical spring return or accumulator

  • Subsea Range Actuators

    Subsea Range Actuators

    We are well versed with supplying subsea product to meet the harsh conditions and stringent demands of subsea applications. The subsea product range encompasses actuator and gearbox designs for retrievable and non-retrievable applications. Our engineering group works closely with contractor and end-user engineers to meet specific project requirements.

  • Rotork - Model VRCS Range - Advanced Valve Remote Control System

    Rotork - Model VRCS Range - Advanced Valve Remote Control System

    The Rotork Advanced Valve Remote Control System starts with the self-contained micro power pack E-ACT-C type electro-hydraulic actuator with integral electronic control unit), and goes up to the “I/O Control Cabinet” which contains main and backup communication cards, power distribution, serial interface and a touchscreen panel for local control.

  • Rotork - Model CQ Range - Compact Part-turn Self-contained Actuators

    Rotork - Model CQ Range - Compact Part-turn Self-contained Actuators

    The CQ range provides an innovative fully-concentric and balanced actuator design for quarter-turn valves. The design features a helical mechanism that transforms linear piston motion into quarter-turn valve stem rotation. CQ actuators provide a much higher torque output for a given footprint than scotch yoke designs typically utilised to operate many quarter-turn...

  • Rotork - Model manPOWER Range - Self-contained Failsafe Actuator

    Rotork - Model manPOWER Range - Self-contained Failsafe Actuator

    The Rotork manPOWER range high-integrity fail-safe valve operation without the need for any power supply. The self-contained system is suitable for workshop or mounting on a wide range of rotary and linear operated valves and It offers a cost-effective solution for actuator applications where operation is infrequent. Typical applications include emergency shutdown...

  • Rotork - Hydraulic Power Units (HPU)

    Rotork - Hydraulic Power Units (HPU)

    Hydraulic power units (HPU) complement our extensive offering of rotary and linear actuators. We have over three decades of experience in their manufacture with units in service in a variety of plants and pipelines in locations spanning the globe.

  • Rotork - Model LP/LH Range - Linear Actuators

    Rotork - Model LP/LH Range - Linear Actuators

    Rotork linear actuators offer the advantages of compact size, high performance and a simple but highly reliable design. They are ideal for operating on/off and control functions of both globe and wedge gate valves. Both spring-return and double-acting configurations are available with either pneumatic or hydraulic cylinders.

  • Rotork - RH Range - Extreme-duty Rack and Pinion Actuators

    Rotork - RH Range - Extreme-duty Rack and Pinion Actuators

    RH rack and pinion hydraulic actuators are engineered to operate ball, butterfly, plug and other quarter-turn valves for either on/off or modulating service. The heavy-duty construction and compact design make this product ideal for skid manufacturers as well as offshore and process applications which require robust yet space saving valve actuation solutions. RH actuators are available in five body sizes to produce torque output up to 3,700 Nm (29,900...

  • Rotork - Model Type K Range - Damper Drives

    Rotork - Model Type K Range - Damper Drives

    The Type K Range offers rotary and linear pneumatic damper drives for utility power plants, refineries, powerhouse boilers, furnaces and process heaters that require precise combustion air and flue gas handling solutions. Type K damper drives have proven to increase boiler efficiency, reduce maintenance, lower fuel consumption and reduce harmful emissions.

  • Rotork - Subsea Actuators

    Rotork - Subsea Actuators

    We are well versed with supplying subsea product to meet the harsh conditions and stringent demands of subsea applications. The subsea product range encompasses actuator and gearbox designs for retrievable and non-retrievable applications. Our engineering group works closely with contractor and end-user engineers to meet specific project requirements.