Royal Crown

Royal Crown

48 training found

Royal Crown Training

  • Environmental Health and Safety- 10 & 30 Hour Certifications

  • 10 Hour Construction Safety Certification with Free Study Guide

    10 Hour Construction Safety Certification with Free Study Guide

    The 10 Hour Construction Safety Certification Training Program is intended to provide an entry level construction worker's general awareness on recognizing and preventing hazards on a construction site. OSHA recommends Safety Certification Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the...

  • Environmental Health and Safety- Confined Space Entry Training

  • Confined Space Entry Training Course

    Confined Space Entry Training Course

    This course encapsulates the safety regulation of the workers working in permit required confined spaces. It instructs about the hazards that may occur during the work in confined spaces.

  • Environmental Health and Safety- Transportation Safety Training - Hazmat Safety Training

  • Bill Judge - 60/60 Dot Supervisor Training Course

    Bill Judge - 60/60 Dot Supervisor Training Course

    As a supervisor of employees performing safety-sensitive tasks such as driving, it is your responsibility to make sure that they can perform their duties without endangering themselves, their fellow employees, and the public. This coursed is geared for supervisors of employees performing safety sensitive tasks such as driving. This supervisor training is required by the Department of Transportation. You will view short instructional segments that...

  • Environmental Health and Safety- Training Environmental Safety- Asbestos Safety Training

  • Workplace Hazards Asbestos Training Course

    Workplace Hazards Asbestos Training Course

    Asbestos is a substance that has been used for centuries. Its heat-resistant properties make it almost indestructible; due to this property, asbestos have been widely used in the construction industry, especially for pipe and boiler insulation. Before 1973, asbestos was sprayed onto different surfaces for fire protection purposes, but this practice was banned due to the hazardous nature of asbestos. Furthermore, it is no longer used for insulating...

  • Environmental Health and Safety- Training Environmental Safety- Environmental Compliance

  • Spill Prevention and Release Reporting Training Course

    Spill Prevention and Release Reporting Training Course

    This course presents an in-depth view of the federal requirements for Spill Prevention, Control, and Countermeasure (SPCC) plans. It also provides a complete analysis of the development of SPCC rules and regulations. Development of SPCC plans requires detailed knowledge of the facility and the potential effects of any oil spill. Thus, this course includes such information as the current SPCC regulations, contingency plans, facility response plan, and...

  • Occupational Health and Safety

  • Management the Security Crises and Negotiating Skills Course

    Management the Security Crises and Negotiating Skills Course

    Course Objective: Preparation of police officers in general to identify security problems and phenomena which pose potential crises and how to plan for the management of the run and the preparation and review of plans confrontation models for some of the various security crises and how to manage them.

  • Security Checkpoints and Control Course

    Security Checkpoints and Control Course

    Course objectives: This course is aimed at consolidating the basic principles and concepts of safety and to familiarize participants with the most important issues and risks and accidents encountered during the performance of his work and the various influences that may hinder performance and how to overcome them with the development of Musharraf skills Security, which make it able to perform their duties efficiently.

  • Disaster Protection Training Course

    Disaster Protection Training Course

    Course Description: Risk management is basically a planning tool for risk management both risk assessment and the results of risk and what are the potential risks, whether from work or group based on carrying out a coordinated and planned steps through which knowledge of the risks and the possibility of their occurrence and are divided into a number of steps and tasks.

  • NEBOSH Course

    NEBOSH Course

    NEBOSH International General Certificate - NEBOSH IGC - UK The NEBOSH International General Certificate is mandatory requirement of all Organization licensed to perform Oil & Energy, Construction, Chemical and Mechanical industrial setups. It provides an excellent foundation in health and safety for managers, supervisors, employee representatives and people starting out on a career in health and safety. The certificate is relevant to all types of...

  • IOSH Course

    IOSH Course

    IOSH Managing Safely - UK Royal Crown for Training Technology is approved course provider of IOSH UK Courses. Due to the overwhelming global demand of IOSH qualifications which are proved as a trademark to the gateway for better job placements & authentic professional development for HSE professionals & in compliance to mandatory pre-requisite of the standard HSE positions IOSH Managing Safely is designed for managers across all industries and...

  • Working at Height & Rescue Training Standard

    Working at Height & Rescue Training Standard

    On successful completion of training the delegate will be deemed to have demonstrated basic knowledge and understanding of:  Relevant revisions enacted in the general health and safety duties of employers to provide training and ensure competence of employees;  Relevant revisions enacted in the personal responsibilities of employees and the selfemployed;  Relevant revisions enacted in the relevant legislation (HSW, WAH, MHSW, LOLER, PUWER,...

  • H2S Fafety

    H2S Fafety

    - Recognize the characteristics and detection of H2S - Demonstrate the correct emergency procedure used in the event of H2S being encountered at the rig site - Recognise and distinguish between the various gas detection equipment used on NDIL rig sites - Be able to operate a self contained breathing apparatus (SCBA) and supply air breathing apparatus (SABA) - Demonstrate the correct rescue procedure to be carried out in an emergency

  • Lifting Operation Supervisor

    Lifting Operation Supervisor

    Lifting of objects generally takes place at construction sites, shipyards, factories and other industrial situations such as offloading with a forklift truck, containers at a warehouse or at a commercial area. Good practice and correct lifting methods can move large objects efficiently, safely and reduce manual handling operations. Incorrect lifting methods however, can lead to major accidents and fatalities. Every year, incorrect lifting...

  • CISRS Basic Scaffold Inspection Course

    CISRS Basic Scaffold Inspection Course

    Overview: This CISRS accredited course will develop your understanding of scaffolding components, forms of construction and the inspection procedures for basic access scaffolds and how to comply with current legislation and Codes of Practice. Objectives: To give the attendees the knowledge to enable them to understand how to inspect basic scaffolding structures according to Work at Height Regulations.

  • CISRS Advanced Scaffold Inspection

    CISRS Advanced Scaffold Inspection

    Objectives: The main objective of the Advanced scaffold inspection course is to give the attendees more comprehensive and in-depth knowledge, to enable them to understand how to inspect complex scaffolding structures in accordance with the Work at Height Regulations. This is in addition to the skills needed to complete full scaffold inspection reports.

  • CISRS Scaffolder Course – Part 1 Trainee

    CISRS Scaffolder Course – Part 1 Trainee

    Objectives: The purpose of part 1 of this scaffolding course is to give the attendees both theoretical and practical knowledge to enable them to erect and dismantle basic scaffolds, using laid down training guidelines.

  • CISRS Scaffolder Course – Part 2 Scaffolder

    CISRS Scaffolder Course – Part 2 Scaffolder

    Objectives: The aim of part 2 of this scaffolding course is to give attendees both theoretical and practical knowledge to enable them to erect and dismantle basic scaffolds using laid-down training guidelines.

  • CISRS Scaffolding Supervisor

    CISRS Scaffolding Supervisor

    Objectives: To give attendees knowledge and skills to plan and supervise scaffolding operations as first-line scaffolding supervisors/managers, trainee supervisors/managers, and foremen.

  • CISRS Skills Test Advanced

    CISRS Skills Test Advanced

    Objectives: The aim of the Advanced Skills Test is to assess delegates and ensure they meet the CISRS scheme requirements for a Scaffolder and NVQ Level 3 in access and rigging.

  • CISRS Skills Test Part 2

    CISRS Skills Test Part 2

    Objectives: The main aim of this scaffolding training course is to assess delegates to the CISRS scheme requirements for a scaffolder and NVQ Level 2 in access and rigging.



    Description: This course helps delegates to gain a solid understanding of the safety of Ex equipment, current safety legislation and codes of practice. It looks at the types of equipment used, protection types and maintenance of equipment in hazardous areas.



    This course provides the student with the knowledge and abilities to perform NORM surveys. The course meets the various State and Federal instruction requirements for employees working with and surveying for radioactive materials, and contains all topics covered in the NORM Worker and Awareness Course

  • NORM Awareness Course

    NORM Awareness Course

    This course meets State and Federal requirements for the instruction of personnel working with radioactive materials, or frequenting areas where these materials are stored or utilized. It provides essential knowledge that workers need to understand their risk when working with NORM and the precautions they need to take.



    Accidents are unplanned and unintentional events that result in harm or loss to personnel, property, production, or nearly anything that has some inherent value. Understanding how to prevent or control accidents requires an understanding of the sequence of events leading to an accident in order to identify and implement countermeasures that contain risks. The required amount of time to complete the course is dependent upon your knowledge of workplace...



    This course provides an understanding of the concept of a confined space and the various elements that may require a permit to be issued. The course focuses on assessing the hazards that may be present in a confined space and the proper means of the elimination. It delves into the proper implementation of a comprehensive confined space entry program with emphasis on hazard identification and the elements of an effective confined space permit. Roles,...



    This course can serve as a Train-the-Trainer Course to prepare you to teach others and to create and manage a DOT Alcohol and Drug Abuse Program. The course includes a PowerPoint presentation for training others. DOT requires that persons designated to determine 'reasonable suspicion' receive training on alcohol misuse and training on controlled substance use. This includes supervisors and anyone else who has occasion to direct drivers. This easy-to-use...



    Hazardous materials are defined by the Secretary of Transportation as those materials and substances that are capable of posing an unreasonable risk to health, safety and property when transported in commerce. There are more than 800,000 hazardous materials shipments every day. The U.S. Department of Transportation is responsible for developing, issuing and enforcing the Hazardous Materials Regulations which are found in Title 49, Code of Federal...

  • Oil and Gas

  • ASNT / ACCP Course

    ASNT / ACCP Course

    Course Objectives: Preparation for ASNT centrally certificated examinations.

  • CSWIP Course

    CSWIP Course

    The CSWIP scheme is: An internationally recognised mark of competence for people engaged in welding and/or inspection related jobs in manufacturing, constructing, operating or repairing high integrity welded structures, plant or components, an accredited scheme - the UK government's Department of Trade and Industry has accredited CSWIP for personnel certification in accordance with ISO/IEC 17024 through the United Kingdom Accreditation Service...

  • Well CAP (IADC) Course

    Well CAP (IADC) Course

    Contents: Cause of Kicks. Kick warning signs. Shut in procedures. Shut in Pressures. Leak-off Test / MAASP. Kill Handling Methods. down Hole &surface problems. Kill sheet and Gauge problems.

  • Well Control (IWCF) Course

    Well Control (IWCF) Course

    Contents: BOP Stack configuration. Diverters and Annular Preventers. Ram Preventers. API Flanges. Inside BOP and valves. Choke Manifold. Mud Gas separator and Vacuum degasser. Volumes and Testing. BOP Control Unit.

  • Management and Human Resources

  • Modern Trends of Risks Management Course

    Modern Trends of Risks Management Course

    Objectives: By the end of the course, participants will be able to: Gain comprehensive perspective on risk management and insurance concepts, tools, and techniques. To develop analytical and integrative thinking in understanding and implementing the risk management practices. Practice communication skills intertwined with risk management topics. Define risks and types of risks. Analyze and assess risks. Use appropriate tools to handle risks. Formulate...

  • Enterprise Resource Planning (ERP) Course

    Enterprise Resource Planning (ERP) Course

    Objectives: Participants' understanding of the system (ERP). Integrate information with jobs and provide a set of necessary for planning and monitoring the various functions and operations tools. Definition of the importance of the ERP system. Progress in their organizations towards achieving the overall goal of the Foundation. Familiarize the participants with the components of ERP. Enable participants to apply the system (ERP). Transfer of knowledge...

  • Human Resource Management

    Human Resource Management

    Students are introduced to the management of an organization's workforce through the design and implementation of effective human resources policies and procedures. Topics include the need for human resources management and its growing professionalism; human resource planning including job design and analysis; recruitment and selection; compensation; employee development; workplace health and safety; and employee relations.



    As the global economy evolves, the way we present information must change. Traditional business writing has always been tough to write, and tougher still to read. In this course, you will learn an impressive alternative, a way in which to write exceptional business reports that are clear to read, beautiful to look at, and that directly meet their user's needs.



    This course allows senior secretaries and senior Administrators to practice essential softskills such as influencing skills, presenting ideas to management, project management and win negotiation through practical case studies and exercises. These soft skills are effective for improving Executive Assistant qualifications. This is an excellent course for EA development as it stretches the PA skillset. Testimonials from past attendees speak for...



    The millennium manager functions at a leadership interface and currently it is an ever evolving one, responding rapidly to global and domestic challenges. The study of neuroscience underpins successful interventions. Today the two functions or roles are interchangeable and that is the motivation for this being an extraordinary Master Class

  • Engineering and Project Management

  • Systems and advanced techniques in installations and facilities maintenance Course

    Systems and advanced techniques in installations and facilities maintenance Course

    At the end of this program the participant will be able to: Planning and follow-up mechanical and HVAC maintenance. Design and maintenance of mechanical systems and air conditioning of buildings. Diagnosis of mechanical failure, air conditioning and maintenance. Develop an integrated administrative and technical system for the maintenance of private buildings, mechanical equipment and air conditioning systems. Supervising the maintenance of mechanical...

  • Quality, Production and Environmental

  • Quality Control & Quality Assurance

    Quality Control & Quality Assurance

    Objectives: Presenting the basic concepts of total quality management and tools. Provide participants with specific tools for TQM enable them to improve performance, productivity and quality in their organizations. Give participants the ability to pursue the principle of total quality in operations management by introducing and applying the principles and tools of total quality, such as the use of statistical methods.

  • Certified Lead Auditor in Quality Management System ISO 9001:2015.

    Certified Lead Auditor in Quality Management System ISO 9001:2015.

    • ISO 9001 – Quality Management System • ISO 9001 is an international standard that specifies requirements for a Quality Management System (QMS). Organizations use the standard to demonstrate the ability to consistently provide products and services that meet customer and regulatory requirements. It is the most popular standard in the ISO 9000 series to which Organizations can obtain certification

  • ISO Environment Management System 14001:2015 Lead Auditor Training

    ISO Environment Management System 14001:2015 Lead Auditor Training

    The course is designed to understand audits for principles of good Environmental Management and to develop their knowledge of the environmental management standards. To enable you to lead an audit team. It will also develop delegates’ knowledge & understanding of different environmental audit types, and the practical skills required to plan, execute and report environmental management audits. On completion, delegates will be able to evaluate the...

  • BS OHSAS 18001:2007 Occupational Health & Safety Assessment Series Lead Auditor

    BS OHSAS 18001:2007 Occupational Health & Safety Assessment Series Lead Auditor

    • Description of the purpose of an OH&SMS with reference to the PDCA cycle, including the principles, processes and techniques used for OH&S, the assessment of risk and the significance in OH&SMS • Preparation and advising organization before third party assessment. • Meeting the training element requirements for certification as a Lead auditor • Understanding and practicing how to undertake, effectively prepare for, carry out, report and follow-up...