60 products found
Royal Eijkelkamp Products
-
Field Measurement Equipment
-
Eijkelkamp - Model 06.15.SA - Penetrologger With GPS, Standard Set
The resistance to penetration is a means of determining the ground load-bearing capacity, and the ease with which roots will grow through the ground (important when agricultural, rural- and civil engineering techniques are involved). The resistance to penetration is a mechanical characteristic that, given a certain texture, depends on changing parameters such as degree of humidity, density and the strength of the connection between mineral particles. ...
-
Eijkelkamp - Model 06.01.SA - 1 m Hand Penetrometer
Hand penetrometer Eijkelkamp, minimal design, for measurements to a depth of 1 ...
-
Eijkelkamp - Model 06.01.SA - Hand Penetrometer to 1 m
Hand penetrometer Eijkelkamp, minimal design, for measurements to a depth of 1 ...
-
Hooghoudt - Model 09.01.SA - Hydraulic Conductivity Test Kit
In case of direct measurement in the field the auger hole method according to Hooghoudt can be applied.Following this method the determination of the permeability to water of a soil takes little time (by comparison to other methods), requires a limited number of ...
-
Eijkelkamp - Model 06.03 - Pocket Penetrometer
The "pocket penetrometer" is specifically used to determine the penetration resistance of top layers (measuring depth 5 mm) and of samples in the field or in the laboratory. Measuring range 0.5 MPa. When pushing the instrument into the ground, the pin encounters a force of the ground. The spring is compressed by this force. A slip ring is taken along during this operation, which shows on the scale the maximum force that has been encountered. The scale has ...
-
Model 14.05 - Field Inspection Vane Tester
The shear strength or stress of the soil depends on different soil characteristics such as for instance: the granular composition, the humus content, the humidity and (in case of vegetation covered areas) the degree of coverage and the density of the roots. In order to determine the shear stress in the strata in for instance a profile pit, on the surface (for instance a sports terrain), at the bottom of a borehole or in a sample, several different shear ...
-
Model 14.10 - Pocket Vane Tester with 3 Vanes
Pocket vane tester for measurement up to 250 kPa (2,5 kg/cm2). The pocket vane tester is a shear strength measuring tool that is used in profile pits or on the surface. The small, practical format also makes the tool very suitable for testing on soil samples. The short period of time the test takes allows for several measurements in the same soil or layer which in turn allows for the calculation of an average value. The shear strength can be raead from a ...
-
Eijkelkamp - Model IB 06.06 - Hand Penetrometer for Top Layers
The hand penetrometer for top layers is a device that is used to determine the penetration resistance of top layers. Because of the limited overall length of the device, the hand penetrometer can also be used for horizontal measurement, for instance in the walls of profile ...
-
Model 09.07 - Guelph Constant Head Permeameter
Guelph constant head permeameter for measurements to a depth of 15-75 cm, complete with field tripod, augers, well brush, water container, vacuum test handpump, etc. in carrying ...
-
Eijkelkamp Watermark - Model 14.27.SA - Automatic Logging of Soil Moisture Meter
Watermark monitor. Complete set for automatic logging of soil moisture data, consisting of datalogger, 7 Watermark sensor (5x with 6 m cable and 2x with 10 m cable), temperature sensor, software and RS232 communication cable. Inclusive quick connectors and pvc installation ...
-
Eijkelkamp - Model 14.35 - Soil Oxygen Content Analysis System
Soil gas analysis can yield a lot of information concerning the soil environment. Using a ‘piercing probe’ and an oxygen content meter the growing conditions for shrubs and trees can be defined. And who would not want to be able to measure the extent of soil pollution in an area without timeconsuming soil ...
-
Hellige - Model 08.10 - pH-Indicator for Soil
Hellige pH-indicator for soil, measuring range pH4 - pH9, (inclusive 50 cc indicator fluid, for about 50 ...
-
Model 09.09 - Tension Infiltrometer Set
Tension infiltrometer for measuring hydraulic properties of unsaturated soil, complete standard ...
-
Arcadis-Eijkelkamp - Model 20.02 - Oil Detection Pan
The oil detection pan is developed for a rapid on-site analysis of soil and groundwater for floating contaminants e.g. soaps, dyestuffs and all kinds of oil derivates such as tar, lubricating oil, kerosine and ...
-
Eijkelkamp - Model 08.05.04 - Mini Hand Sieves Set, Pocket Size
Mini hand sieves set, pocket size, height 40 mm, with 6 interchangeable rimmed gauze sieve discs, Ø 100 mm, sieve openings: 2.0, 1.0, 0.500, 0.250, 0.125 and 0.063 ...
-
Model 06.02 - 80 cm Penetrograph Standard Set
Penetrograph, standard set for measurements to a depth of 80 ...
-
Eijkelkamp - Model CBR Ø 9, 3 PCS - Probing Rod
Probing rod Ø 9 mm for penetrologger CBR, set of 3 pieces for depth measurements till 70 ...
-
Eijkelkamp - Model 09.01.SA - Hydraulic Conductivity Test Kit
In case of direct measurement in the field the auger hole method according to Hooghoudt can be applied.Following this method the determination of the permeability to water of a soil takes little time (by comparison to other methods), requires a limited number of ...
-
Eijkelkamp - Model SM150T - Soil Moisture Measurement Set with HH2 Meter
Soil moisture measurement set SM150T, complete set with sensor SM150T (142405), hand meter HH2 (142602), cable and case. Warranty 5 ...
-
Model 09.06 - Mini Rainfall Simulator for Erosion Test
The extent to which the soil is sensitive to erosion is determined largely by the composition of the soil. Knowledge of the sensitivity to erosion is important for the development of a certain plot. The sensitivity to erosion is hard to measure. Absolute values can not be obtained. It is, however, possible to obtain a reasonable indication by means of a relative measurement. For such a measurement a rainfall simulator can be ...
-
Eijkelkamp - Model 17.21 - Measuring Wheel, Incl. Case
Precision measuring wheel with folding grip for distance measuring in the field. The counting mechanism is shockproof and fitted over the measuring wheel. The meter can be calibrated and has a measuring range of 9999.99 m and can be read-out in cm. The tolerance is below 0.02%. The counting mechanism is driven without vibrations. The measuring wheel is supplied inclusive a ...
-
Eijkelkamp - Model 08.15 - Soil Sampling and Classification Set
Soil sampling and classification set, standard set to a depth of 2 ...
-
Eijkelkamp - Model 17.16 - Tri-Partite Aluminium Ruler, 300 cm
The aluminium ruler is used for accurate measuring in mm of the planeness of bare surfaces such as asphalt, concrete, gravel, floors of sports accommodations, etc. The aluminium ruler comes in three parts and is supplied inclusive measuring wedges and carrying bag. The overall length measures 3 meter, the range is 1-20 mm and the accuracy is 0.3 ...
-
Eijkelkamp - Model 08.11.01 - Soil Colour Book
Soil colour book, with 12 colour charts (7.5R/10R/2.5YR/ 5YR/7.5YR/10YR/2.5Y/5Y/7.5Y /5R and GLEY = two charts. Total 389 colour chips japanese version, english ...
-
Eijkelkamp - Model 06.01.SB - Hand Penetrometer to 3 m
Hand penetrometer Eijkelkamp, standard design, for measurements to a depth of 3 ...
-
Eijkelkamp - Model 08.19 - Civil Engineering Soil Test Kit
Soil research is a very important aspect in the planning and execution of agricultural- as well as civil engineering projects and operations. In order to make the soil research as comprehensive as possible the following studies must be made with regards to: The build up of a soil; i.e. determining the composition, the thickness and the position of the various strata. The soil properties; measuring the permeability, the filtration capacity, the bearing ...
-
Eijkelkamp - Model 13.90 - Water Sampling and Field Analysing Set
Water sampling and field analysing set, complete standard ...
-
Eijkelkamp - Model 17.20.01.20 - Fibre Glass Measuring Tape, 20 m
Measuring tape holder with synthetic or stainless steel measuring tapes for distance measuring are supplied in various lengths. All measuring tapes meet the ECregulations class II regarding tolerance, with an accuracy of approximately 2 mm on 10 ...
-
Model 11.03.40 - Sounding Apparatus Mini, 10m
The devices are provided with a probe, which is connected to a measuring tape with centimeter graduation. When the probe touches a conductive liquid, a clear acoustic and light signal is produced. If the cable is then lifted a little, the signal will stop. Determination of this point allows the user to read the depth directly from the measuring tape (accuracy: ± 1 ...
-
Eijkelkamp - Model 11.08.07 - Floating Layer Thickness Meter
Floating layer thickness meter for detection of floating- and sinking layers of hydro-carbons, acoustic- and light signal, electrode Ø 16 mm, 30 m tape with mm graduation, inclusive carrying bag. CSA certified for class 1 groups C and D locations till 50 ...
-
Eijkelkamp - Model 11.01.01.17 - Sounding Device, Ø 17 mm, With Eye
A sounding device is really just a small tube, closed on one side, with a diameter of 17 mm. When the open bottom touches the liquid level at a fair speed, a “plopping” sound can be heard. In normal conditions the sound is clearly audible until a depth of 10 meters. When it has reached its depth, the device is moved up and down over short distances for a more accurate level determination. Its accuracy is ± 0.5 cm. The measuring tapes ...
-
TurbiCheck - Turbidimeter
Turbidimeter TurbiCheck. Light source infrared light, measurement by the intensity of scattered light at an angle of 90 degrees, digital readout. Measuring range 0.01-1100 TE/F or FNU/NTU. Battery powered. Complete in ...
-
Model 13.14 - Mechanical Current Meter With Propeller
This small, lightweight mechanical current velocity meter has a measuring range of approximately 0.1 m/sec. to 7.9 m/sec. The meter is used for current velocity measurements in rivers, channels, sewage systems, pipes, etc. Suspended from a wire the meter can be applied at great depth. The meter is balanced in such a way that it will remain in a horizontal position even if the meter for instance is pulled at speed by a line. The propeller is linked ...
-
Eijkelkamp - Model 13.13 - Mini Current Meter With Alum. Propeller
The mini current meter with one aluminium propeller is used in small ditches, with low water levels. Measuring range 0.03 to 2.5 m/sec. The instrument is included in a complete ...
-
Eijkelkamp - Model 13.12 - 125mm Current Meter Synthetic Propeller
The instrument is used for the accurate determination of the current velocity in water ways, channels, rivers and the sea. The meter can also be applied in polluted water currents. The measurements are executed with the propeller mounted on the rod(s) or connected to a cable. The current velocity meter has a measuring range of 0.025 to 10 ...
-
Eijkelkamp - Model 16.89 - Evaporation Pan, Standard Set
Evaporation pan, class A, standard set. The class-A evaporation pan is used to determine the evaporation rate of open ...
-
Eijkelkamp - Model 18.41 - Reflecto Meter RQ-Flex, Excl. Test Strip
Reflecto meter RQ-flex for the measurement of various anion and cation in soil, water, compost, (pressed) plant material, substrates, etc. LCD display, portable, for use in the field, incl. batteries and accessoires in synthetic case, excl. test ...
-
NitraChek - Model 18.40 - 5-500 ppm Reflectometer
Nitrachek reflectometer, measuring range 5-500 ppm with date and time related data storage, with 100 nitrate test strips, calibration solution and accessories in ...
-
Aardvark - Model 09.12.SA - Fully Automated Constant-Head Borehole Permeameter
The Aardvark permeameter is a fully automated constant-head borehole permeameter to measure soil hydraulic conductivity (Ksat) and other related parameters like sorptivity and percolation in the field. The set can be installed easily and can be used to a depth of 15 m. The permeameter is available for use with a laptop/tablet and for use with a (flash) ...
-
Eijkelkamp - Model 14.26.82.04 - Soil Moisture Profile Probe, 40 cm
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 4 measuring elements with a measuring range of 40 cm, so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a measuring volume of ± 1.5 litres at each profile depth. ...
-
Eijkelkamp - Model 11.03.30 - Sounding Devices With Acoustic and Light Signal
The devices are provided with a probe, which is connected to a measuring tape with centimeter graduation. When the probe touches a conductive liquid, a clear acoustic and light signal is produced. If the cable is then lifted a little, the signal will stop. Determination of this point allows the user to read the depth directly from the measuring tape (accuracy: ± 0.5 ...
-
Eijkelkamp - Model 14.26.82.06 - Soil Moisture Profile Probe , 100 cm
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 6 measuring elements with a measuring range of 100 cm so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a measuring volume of ± 1.5 litres at each profile ...
-
Eijkelkamp - Model 14.26 - Thetaprobe Soil Moisture Measuring Standard Set
Thetaprobe soil moisture measuring set. Complete standards set consisting of soil moisture meter (read-out unit), Thetaprobe sensor, adjusting block for installation of sensor, set of 12 pieces spare pins for sensor and carrying case. Warranty 5 ...
-
Eijkelkamp - Model 14.26.02 - Soil Moisture Meter
Soil moisture meter to read out the Thetaprobe, the W.E.T. sensor, the profile probe and the SM300 soil moisture sensor. With 25-way D socket. Inclusive operating instructions, PC software and RS 232 ...
-
Eijkelkamp - Model 06.15.SC - Penetrologger CBR Set
The Eijkelkamp penetrologger CBR measures by a static penetration test directly CBR values using the standard CBR cone. The standard California bearing ratio (CBR) is a penetration test for evaluation of the mechanical strength of road subgrades and basecourses. The CBR is the basis for determining the thickness of soil and aggregate layers used in the design of roads and airfields. A soil’s CBR value is an index of its resistance to shearing under ...
-
Eijkelkamp - Model Type NMI - Grass Height Meter
Grass height meter type NMI, to estimate the amount of grass on a plot. For determination of the right moment of mowing or grazing. In box. Maximum height of grass to be measured: 22 ...
-
Model Ø 15 mm, Length 50 cm - Probing Rod
Probing rod, Ø 15 mm, length 50 cm, (for cone 3 1/3 cm2 to cone 10 ...
-
Eijkelkamp - Model Ø 15 mm, Length 50 cm - Extension Rod
Extension rod, Ø15 mm, length 50 ...
-
Eijkelkamp - Model 59x18x28 cm - Hand Penetrometer Flightcase
Flightcase for hand penetrometer (0601SA), dimensions 59x18x28 cm ...
-
Eijkelkamp - Model 060114 - Measuring Instrument With Manometer
Measuring instrument with manometer for measurements till maximal 1000 N/cm2. Inclusive calibration certificate. The advised measuring range with an accuracy of +/- 8 % is between 200 and 700 ...
-
Eijkelkamp - Model Ø 10 mm, Length 50 cm - Probing Rod
Probing rod, Ø 10 mm, length 50 cm, (for cone 2 ...
-
Model Ø 8 mm, Length 100 cm - Probing Rod
Probing rod, Ø 8 mm, length 100 cm (for cone ...
-
Eijkelkamp - Model Dimensions 60x40x18 cm - Hand Penetrometer Flightcase
Flightcase for hand penetrometer (0601SB), dimensions 60x40x18cm ...
-
Model 145030 - Electronic Tensimeter
Electronic tensimeter, measuring range 0-999 hPa, accuracy 2 %, digital display. For tensiometer tubes with a diameter between 21.5 and 23 mm. Inclusive 9V battery and measuring needle and carrying bag. The electronic tensimeter is a portable pressure sensor in a bag for measurement of the moisture tension in the soil, measured through a tensiometer tube placed in the soil. The measuring device can be moved from tensiometer tube to tensiometer tube ...
-
Delta-T - Model SM150 - Soil Moisture Sensor
Soil moisture sensor SM150, measuring range 0...70% volume soil moisture. Accuracy +/- 3%. Measuring range temperature 0...-60 °C, accuracy 0.5 °C. With 2 measuring pins, length 51 mm. Output signal 0-1 Vdc. M12 connection, exclusive cable. Warranty 5 ...
-
Eijkelkamp - Model 09.04 - Double Ring Infiltrometer
Double ring infiltrometer, standard set for synchronic measuring in threefold. Measurements according to ASTM D3385-03. Standard test method and DIN ...
-
Eijkelkamp - Model 08.04 - Sand Rulers
A sand ruler is a disc made of transparent material with standard (specimen) samples. It is an excellent indicative aid in determining the particle size distribution. Of the sample to be tested a representative part is rubbed dry with the fingers in the palm of the hand. The sample is then placed in the hollow area in the center of the ruler. The average grain size is now judged by comparing the average grain size of the sample with the specimen in the ...
-
Model 10.02 - Well Protection Materials
To protect monitoring wells (and piezometers) against traffic, destruction, contamination and weather effects, various protective materials are ...
-
Eijkelkamp - Model 10010401 - Filter Gauze Polypropylene Ca. 10 m
Filter gauze, polypropylene, length ca. 10 m, Ø 30-65 mm, with KIWA certificate ...
-
Eijkelkamp - Model 10010403 - Filter Gauze, Polypropylene, 1 m
Filter gauze, polypropylene, pieces of 1 m length, Ø 30-65 mm, packed a piece, inclusive tightning strap, set of 10 pieces, with KIWA certificate ...