42 products found

Products

  • Contamination Simulation

  • STS RadEye - Simulation Probes

    STS RadEye - Simulation Probes

    The STS RadEye Simulation Probes consist of a simulated  probe housing STS electronics and cable connector so that it will operate with a real Thermo RadEye SX meter. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be done with a real probe when used by a skilled...

  • STS - Model 6150ADK - Simulator Probe

    STS - Model 6150ADK - Simulator Probe

    The STS 6150ADK probe is a large area probe, 150mm wide, and 200mm long. It differs from other STS probes, in that it is self contained detection and interface unit, and can therefore be connected direct to real ratemeters. It contains a six cell MN1500 battery pack which this gives about 10 hours of operation. The probe is designed to replicate the particular properties of radioactive surface contamination in that the simulant is designed to stay...

  • STS - Model 6150AD - Simulated Contamination Probe

    STS - Model 6150AD - Simulated Contamination Probe

     The STS SPA6 probe is in cylindrical form, 67mm diameter, and 200mm long. It differs from other STS probes, in that it is self contained detection and interface unit, and can therefore be connected direct to real ratemeters. It contains a six cell MN1500 battery pack which this gives about 10 to 15 hours of operation. The probe is designed to replicate the particular properties of radioactive surface contamination in that the simulant is...

  • STS - Model STS 807 - Thermo Electra Simulator

    STS - Model STS 807 - Thermo Electra Simulator

    The STS Thermo Electra Simulator is a real Thermo Fisher Electra which houses the STS circuitry to convert the instrument into a simulator. To do this the HV board is removed and the existing probe connector and cable are replaced so that it will operate with any STS simulated probe. The Electra retains its full functions including audio output, backlight and user setable alarms and other settings. The instrument functions on all 3 channels - alpha,...

  • STS - Model 900 Series - Thermo Fisher Mini Simulator

    STS - Model 900 Series - Thermo Fisher Mini Simulator

    The STS 802 consists of a real Thermo Fisher Mini Instruments 900 series with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored.

  • STS - Simulated Contamination Probes

    STS - Simulated Contamination Probes

    STS manufacture a range of different simulated probes for use with simulated contamination meters.  All the probes have a universal connector enabling any probe to be used with any simulated meter.  Training sessions for Radiation workers, technicians and managers can therefore be tailored to suit each individuals requirements.

  • STS - Ionising Radiation Contamination Simulators

    STS - Ionising Radiation Contamination Simulators

    STS specialises in the conversion of standard instruments for training purposes. A range of instruments including the Rotem Ram Gene, Ludlum 3,12 and 14, Thermo Electra and CM11and others are all available  designed to replicate the response and characteristics of the real instruments.

  • STS - Model 812 - Ram Gene Simulator

    STS - Model 812 - Ram Gene Simulator

    The STS 812 consists of a real Rotem Ram Gene with added STS electronics STS. The instrument detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the instrument close to and slowly over the surface, as would be done with a real Ram Gene when used by a skilled operator. Too fast, or too far away results in no detection –...

  • Ludlum - Model STS 808 - Simulator

    Ludlum - Model STS 808 - Simulator

    The STS 808 consists of a real Ludlum Model 3 with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be done with a real probe when used by a skilled operator. Too fast, or too...

  • STS - Model CM11 - Clothing Monitor

    STS - Model CM11 - Clothing Monitor

    The STS CM11 Clothing Monitor Simulator consists of a real Thermo CM11 housing STS electronics and cable connector so that it will operate with a simulated STS probe - in this case a DP11 or DP6 style large area probe.

  • STS - Model SBM-2D - Smart Probe

    STS - Model SBM-2D - Smart Probe

    The STS SBM-2D consists of a simulated Canberra probe housing STS electronics and cable connector so that it will operate with a real Canberra MIP10 Digital or Analogue meter. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be done with a real probe when...

  • STS - Model SPA6 - Simulated Probe

    STS - Model SPA6 - Simulated Probe

    The STS SPA6 probe is in cylindrical form, 67mm diameter, and 200mm long. It differs from other STS probes, in that it is self contained detection and interface unit, and can therefore be connected direct to real ratemeters. It contains a six cell MN1500 battery pack which this gives about 20 to 25 hours of operation. The probe is designed to replicate the particular properties of radioactive surface contamination in that the simulant is designed to...

  • Model STS 800 Series - Ionising Radiation Simulants

    Model STS 800 Series - Ionising Radiation Simulants

    The STS 800 Series use unique STS simulants. This technology consists of three parts, simulated contamination and a modified real rate meter or copy of a real model and a simulated probe to detect it. The simulated contamination is a safe liquid - STS LS1 - which can be applied to clothing, equipment, plant and surfaces where it slowly evaporates. Because the gas is very dense, the gas cloud stays near to the surface. This...

  • STS Ludlum - Model 177 Series - Contamination Simulator

    STS Ludlum - Model 177 Series - Contamination Simulator

    The STS 804 consists of a real Ludlum 177 series with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be done with a real probe when used by a skilled operator. Too fast, or too far...

  • Eberline - Model STS 801A - Contamination Simulator

    Eberline - Model STS 801A - Contamination Simulator

    The STS 801A is an exact copy of the Eberline RM14A, entirely built by us. It contains the electronics needed to simulate all the functions of a real RM14 and also to operate the STS probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be done with a real probe when used by...

  • STS Ludlum - Model 811 & 12 - Contamination Simulators

    STS Ludlum - Model 811 & 12 - Contamination Simulators

    The STS 811 consists of a real Ludlum Model 12 with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be done with a real probe when used by a skilled operator. Too fast, or too far away...

  • Contamination Simulation - Simulated Contamination Probes

    STS manufacture a range of different simulated probes for use with simulated contamination meters.  All the probes have a universal connector enabling any probe to be used with any simulated meter.  Training sessions for Radiation workers, technicians and managers can therefore be tailored to suit each individuals requirements.

  • STS - Model EP15 - Simulated Contamination Probe

    STS - Model EP15 - Simulated Contamination Probe

    The STS EP15 is a replica of a real EP15 probe , but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts.  The Probe detects the presence of the STS LS1 liquid stimulant spray placed on surfaces and clothing.

  • STS - Model HP260 - Pancake Contamination Probe

    STS - Model HP260 - Pancake Contamination Probe

    The STS HP260 is a replica of a real pancake probe , but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts.  The Probe detects the presence of the STS LS1 liquid stimulant spray placed on surfaces and clothing.

  • Radiation Survey Simulation

  • STS - Model 6150AD - Field Survey Simulators

    STS - Model 6150AD - Field Survey Simulators

    The STS 6150AD consists of a real Saphymo 6150 Survey Meter with additional STS electronics built into an extended case. The instrument operates using a STS radiofrequency detection head which detects the presence of a simulated radiation source, the resultant reading is displayed as counts on the 6150 Display.

  • STS - Model 901 - Eberline RO2 Simulator

    STS - Model 901 - Eberline RO2 Simulator

    The STS 901system comprises a modified Eberline RO2 and a radiofrequency source, such as the STS model 913 360 degree source, to simulate the radiation source. The simulated instrument uses a sophisticated detector to measure the RF signal from the source, and this is then displayed on the meter, in appropriate units. Because the instrument responds directly to the signal from the source, the system provides an extremely realistic simulation.

  • STS - Model 901A - Thermo RO20 Simulator

    STS - Model 901A - Thermo RO20 Simulator

    The STS 901A system comprises a modified Eberline RO20 and a radiofrequency source, such as the STS model 911, concealed in a camouflaged container, to simulate the radiation source. The simulated instrument uses a sophisticated detector to measure the RF signal from the source, and this is then displayed on the meter, in appropriate units. Because the instrument responds directly to the signal from the source, the system provides an extremely...

  • STS - Model 904 - Teletector Simulator System

    STS - Model 904 - Teletector Simulator System

    The STS 904 system comprises a modified Saphymo 6150AD and telescopic pole with a radiofrequency source,  to simulate the radiation source. The simulated instrument uses a sophisticated detector to measure the RF signal from the source, and this is then displayed on the meter, in appropriate units. Because the instrument responds directly to the signal from the source, the system provides an extremely realistic simulation.

  • STS - Model 908 TSA PRM470 - Simulator

    STS - Model 908 TSA PRM470 - Simulator

    The STS 908 TSA PRM470 is in use with training facilitators, training emergency services and MOD personnel in emergency preparedness exercises, the simulator allow the trainers to establish realistic scenarios such as covert identification of sources, lost source recovery and routine monitoring. The STS 908 system comprises a modified TSA Systems PRM 470 and a radiofrequency source, such as the STS 914 minature source, concealed in a camouflaged...

  • STS Ram Gene - Model 1 MK II - Radiation Field Simualtor

    STS Ram Gene - Model 1 MK II - Radiation Field Simualtor

    The STS Ram Gene consists of a real Rotem Ram Gene with added STS electronics, and is a tool used in Radiation Protection Training in many Police forces and Hospital Radiation Training Departments in the UK. The unit developed by STS utilises microwave technology to safely replicate radiation fields. A microwave source, such as those shown, is placed in the training area and the simulated unit activated, the instrument then functions exactly as the...

  • STS - Model 911 and 911DVR - Simulated Point Sources

    STS - Model 911 and 911DVR - Simulated Point Sources

    A grey plastic box, 70 x 80 x 140mm houses the source and the simulated radiation emerges from one end in a cone with an angle of about 120 degrees. This source is powered by 4 C cells which are installed within the case. This source is available with an optional remote control which enables the trainer to adjust the strength of the simulated field being produced.

  • STS - Model 913VR & 912 - Pipe & Omnidirectional Sources

    STS - Model 913VR & 912 - Pipe & Omnidirectional Sources

    This source is useful for training where the trainee may approach the source from any direction- the radiation is emitted from each of the six faces and therefore can be detected in all horizontal directions. This unit is available with a remote control function which allows the trainer to adjust the strength of the radiation field being produced without the knowledge of the trainee. The source is 150mm diameter and 80 mm high,with a Power Supply...

  • New STS Safe-Series

  • STS - Model Safe-EPD - Simulated Generic Electronic Personal Dosimeter

    STS - Model Safe-EPD - Simulated Generic Electronic Personal Dosimeter

    The STS Safe-EPD simulator is a simulated generic Electronic Personal Dosimeter designed to aid the tuition of workers in the nuclear industry in safe practices and in understanding the accumulation of dose over time without exposure to radiation. Nuclear Training without Real Sources. The simulated doismeter operates using an STS radio frequency detection system which detects the presence of a simulated radiation field with the resultant reading...

  • STS - Model Survey-Safe - Simulated Radiation Survey Meter

    STS - Model Survey-Safe - Simulated Radiation Survey Meter

    The STS Survey-Safe simulator is a simulated radiation survey meter designed to aid the tuition of workers in the nuclear industry in safe practices and in understanding the nature and mechanics of ionising radiation. The instrument operates using an STS radio frequency detection head which detects the presence of a simulated radiation field with the resultant reading displayed on the LCD Display of the instrument. The Survey-Safe simulated survey...

  • STS - Model Safe-FH40G Series - Radiation Field Simulator

    STS - Model Safe-FH40G Series - Radiation Field Simulator

    The STS Safe-FH40G series of simulators. The FH40G is available as a hand held unit or mounted on a telepole for distance working. The unit developed by STS utilises the STS Safe-Series technology to safely replicate radiation fields. A radiofrequency source, such as those shown, is placed in the training area and the simulated unit activated, the instrument then functions exactly as the real instrument does but is detecting the radio field not...

  • STS - Model Safe-Series 6150AD - Radiation Field Simulation

    STS - Model Safe-Series 6150AD - Radiation Field Simulation

    The new STS Safe-Series range brings new technology into handheld simulation to provide the most realistic simulators available today. A unique radio system produces both a near isotropic field pattern from the source and from the detector. A good representation of the inverse square law and attenuation of different materials adds to the realistic response. Available now is the Safe-Series 6150AD simulator. This Survey meter simulator is a replica of...

  • STS - Model Safe Series GMS610 - Radiation Field Simulation

    STS - Model Safe Series GMS610 - Radiation Field Simulation

    Safe Training Systems have just completed work on a new Simulator for a unique instrument with a multichannel detector. The GMS610 works using the STS Safe Series technology highly modified to output several different channels detected from a modified Variable Mini Source. The Instrument also features a check calibration source that is used to set up the instrument and to provide trainees with relistic low calibration and failed calibration...

  • STS - Model Safe-Variable MiniSource - Simulated Radiation Source

    STS - Model Safe-Variable MiniSource - Simulated Radiation Source

    The Safe-MiniSource runs off 2 standard AAA cells giving an operation time of over 10hrs. The Safe-Series of instruments offer the perfect solution for CBRN Training, Hazmat Training and Homeland Security Training with simple intuitive controls, competitive pricing and low ongoing cost of ownership. The STS Safe-MiniSource is not designed to be intrinsically safe and therefore should not be used in hazardous environments. The units are not waterproof...

  • STS - Model Safe-MiniSource - Simulated Radiation Source

    STS - Model Safe-MiniSource - Simulated Radiation Source

    The STS Safe-MiniSource simulator is a simulated radiation source designed to aid the tuition of workers in the nuclear industry in safe practices and in understanding the nature and mechanics of ionising radiation . The instrument operates using an STS radio frequency emitter to generate a field which can be detected by the Survey-Safe or Dosi-Safe with the resultant reading  displayed on the LCD Display of the instrument.

  • STS - Model Safe-Series - Generic Radiation Field Simulators

    STS - Model Safe-Series - Generic Radiation Field Simulators

    The STS Safe-Series has been developed in conjunction with Reading University and the Technology Strategy Board. The development remit was to produce a generic series of instruments suitable for all users across the Nuclear Plant, Homeland Security (CBRN) and Emergency Services sectors. The unit has been designed to be cost effective to produce and maintain allowing a lower sales price and cost of ownership. The system is designed to be modular so...

  • STS Safe-PocketSource - Simulated Radiation Source

    STS Safe-PocketSource - Simulated Radiation Source

    The STS Safe-PocketSource simulator is a simulated radiation source designed to aid the tuition of workers in the nuclear industry in safe practices and in understanding the nature and mechanics of ionising radiation. The instrument operates using an STS radio frequency emitter to generate a field which can be detected by any of the Safe-Series monitors and postal detectors with the resultant reading displayed on the LCD Display of the instrument.

  • STS - Model Safe-Series - Portal Monitors Simulator

    STS - Model Safe-Series - Portal Monitors Simulator

    STS have developed a new system for simulation of Portal Monitors which does not require the adaption or interaction of the existing portal. The system can be tailored to the clients requirements to provide a suitable output for their training scenario. The system comprises of 3 parts.

  • STS - Model Safe-Series - Hand Held Radiation System

    STS - Model Safe-Series - Hand Held Radiation System

    The New STS Safe-Series is the latest development in hand held radiation instrument simulation providing the most realistic experience yet for trainees in the Nuclear Industry, Homeland Security and Emergency Services. This new system has been developed to as closely as possible mimic a real ionising radiation field and the detection instruments have been designed to replicate the real response an instrument would give.

  • Safe-Series RadEye GF10 - Model Safe-RadEye GF10 - Simulated Thermo RadEye(tm) GF10

    Safe-Series RadEye GF10 - Model Safe-RadEye GF10 - Simulated Thermo RadEye(tm) GF10

    These all new simulators use a real unmodified Thermo RadEye with the GM tube removed and the STS simulation circuit added. The STS circuit generates pulses from the radio signal received from the simulated source and send these pulses directly to the RadEye circuit outputting as a standard reading in Sv's. STS have introduced both G-10 and the extended range GF-10 models with the first batch already produced and dispatched to our Dutch distributors...

  • Portable Fluorescence

    The STS SMF4 is a portable fluorimeter used for the tracing and identification of cross connected sewers and faecal organic pollution in water courses.

  • STS - Model SMF 4 - Portable Fluorimeter for Organic Pollution Monitoring

    STS - Model SMF 4 - Portable Fluorimeter for Organic Pollution Monitoring

    STS have produced the fully portable SMF4 Fluorimeter which allows instant quantification of Tryptophan, a surrogate for BOD, in water samples on site, allowing immediate decisions to be taken regarding water quality and control actions.This technique simplifies and quantifies investigations into cross connections in sewers and recycled water systems, illegal discharges to surface waters and monitoring consent agreements.Operation and control of the...

  • STS - Model SMF3 - Whole Body Surface Monitoring Fluorimeter

    STS - Model SMF3 - Whole Body Surface Monitoring Fluorimeter

    The SMF 3 Surface Monitoring Fluorimeter is a whole body dosimeter which is used to study the spreading and penetration characteristics of any hazardous material where quantitative measurements of skin and clothing contamination and absorption are required. These measurements enable the spreading, accumulation and removal of contamination to be better understood. This in turn allows researchers to develop safer working practices and design more...

  • Siloxane Monitoring

    The STS Siloxane Monitor is used for measuring the contaminated siloxane load being passed into a biogas or landfill gas engine used to generate power (CHP) or to export gas to grid.

  • STS - Siloxane Monitor for Biogas Feeds to CHP Engines

    STS - Siloxane Monitor for Biogas Feeds to CHP Engines

    Gas derived from Anerobic Digestion (AD) plants or landfill sites is usually fed to combined heat and power (CHP) engines to be converted to electricity for supply to the grid or for powering on site plant and equipment. When engines fail they can be expensive to fix and lead to significant loss of income for the operator. Biogas and Landfill gases can have significant levels of Siloxane contamination; this contamination is removed by carbon and...