SDEC France

SDEC France

24 products found

Products by Eijkelkamp Soil & Water

  • Water Samplers (Ground)

  • Eijkelkamp Grundfos - Model MP 1 - Submersible Pump Sets

    Eijkelkamp Grundfos - Model MP 1 - Submersible Pump Sets

    The Grundfos MP 1 pump used in the Grundfos MP 1 submersible pump sets is specially designed for purging and sampling monitoring wells with a diameter of at least 50 mm and a depth to 90 meters. The pump motor is controlled by a special adjustable frequency converter. Since the frequency is continuously adjustable, the capacity of the Grundfos MP 1 pump can be controlled from 0 to 2 m3/hour. This creates a constant flow of anaerobic water. Each new...

  • Eijkelkamp - Model 12.13 - Hand-Operated Foot Valve Pump Set

    Eijkelkamp - Model 12.13 - Hand-Operated Foot Valve Pump Set

    Two tubes, with a diameter of 10 or 16 mm, can be fitted on the hand-operated foot valve pump. The lever hinges on a tripod of which the height can be adjusted. In this way it is possible to take samples from wells fitted with a shaft type well cover as well as street type well covers. The hinge point of the lever can be moved quickly, in this way the stroke lever ratio can be adjusted which makes it possible to work efficiently at all times. The...

  • Eijkelkamp - Model 12.40 - Liquid Layer Sampler, Rod Operat. Stand

    Eijkelkamp - Model 12.40 - Liquid Layer Sampler, Rod Operat. Stand

    This translucent teflon and stainless steel sampler is specially suitable for the indication of layers, measuring the thickness of the floating layer and the sampling of drums, tanks on lorries, gully holes and shallow oil separators. With the liquid layer sampler also depth specific samples can be taken. The translucent sample tube allows for immediate research in the field of for instance the thickness of the layers in the sample. The sample taken...

  • Eijkelkamp - Model 12.23 - Hand Operated Peristaltic Pump

    Eijkelkamp - Model 12.23 - Hand Operated Peristaltic Pump

    The hand-operated peristaltic pump is a very reliable apparatus that is used for pumping of gasses and fluids. The pump used is a simple, but very durable, peristaltic pump with three pressure rollers. The bearings of the drive shaft and the pressure rollers are waterresistant. The pump can deliver a pump pressure of 3 bar (thus also suitable for use with in-line filters) and an underpressure maximum of 1 bar. It is a selfpriming pump. Even when the...

  • Eijkelkamp - Model 12.25 - Peristaltic Pump Standard

    Eijkelkamp - Model 12.25 - Peristaltic Pump Standard

    This peristaltic pump, specially designed for use in the field, is battery powered and microprocessor controlled. The microprocessor enables an adjustable constant number of revolutions (which can be stored in memory), protection against overload and various modes of external control. Controlling the peristaltic pump can be executed via the key-pad on the front panel. A built-in maintenance free 12 Volt battery enables you to use the pump 2 to 5 hours...

  • Eijkelkamp - Filterholder for In-Line Filtration System

    Eijkelkamp - Filterholder for In-Line Filtration System

    The filter apparatus, suitable for field and laboratory, has a net filtration area of 130 cm2. The medium to be filtered only has contact with the chemically inert teflon. The rest of the apparatus consist of stainless steel. If the proper filter membrane is used, very agressive fluids and gasses can also be filtered. The filter apparatus can be connected in-line to a peristaltic pump, nitrogen powered gas-lift pump or a bladder pump. Also vacuum...

  • Eijkelkamp - Model 12.18.02 - Plunging-Siphon, 19 x 16 mm, 90 cm

    Eijkelkamp - Model 12.18.02 - Plunging-Siphon, 19 x 16 mm, 90 cm

    The plunging siphon is a very simple instrument for sampling of homogeneous fluids from vessels, tanks, containers (for instance tank lorries) and basins. As glass plunging siphons tend to break easily the unbreakable translucent teflon is applied. The inert teflon is not affected by chemicals avoiding the sample to be contaminated by the equipment. The plunging siphon is heat resistant to a temperature of 250°C. After removal of the narrowing...

  • Eijkelkamp - Model 12.12.SA - Submersible Pump Set (Low Cost)

    Eijkelkamp - Model 12.12.SA - Submersible Pump Set (Low Cost)

    This low cost submersible pump set is suitable for use in monitoring wells with a diameter of minimal 40 mm. The set includes three submersible pumps “Gigant”, three booster pumps, a roll of extension cable, sealed crimp splices (to make a waterproof cable extension), a roll of polyethylene sampling tube and a battery with battery charger. Both pumps are small centrifugal pumps with small but powerful motors. This allows them to fit in...

  • Eijkelkamp - Model 12.28.02 - Stainless Steel Bladder Pump Ø 22 mm

    Eijkelkamp - Model 12.28.02 - Stainless Steel Bladder Pump Ø 22 mm

    These stainless steel bladder pumps are used for purging and taking samples in monitoring wells. The teflon bladder in the pump prevents contact between the sample water and compressed air. These pumps are supplied with a pneumatic regulator and tubes. The regulator restricts the delivery during purging and sampling, which keeps the turbidity low (low flow purging/sampling). This technique is attracting increasing interest world wide (with the coming...

  • Eijkelkamp - Model 19 mm, 95 cm - Synthetic Bailer Sampler

    Eijkelkamp - Model 19 mm, 95 cm - Synthetic Bailer Sampler

    The bailer samplers of rigid transparent teflon are supplied in various sizes and diameters. A special teflon coated cable can be delivered for lowering and raising the samplers. For all sizes a teflon emptying device is available to allow drainage of the sampler without any aeration or turbulence. HDPE and pvc disposable bailer samplers including bottom emptying device are also available.

  • Model 12.04.SA - 250 ml Bailer Sampler Set

    Model 12.04.SA - 250 ml Bailer Sampler Set

    This bailer sampler consists of a stainless steel tube and is available in a design with a 33 mm or 45 mm diameter and a content of resp. 250 ml and 1000 ml. The stainless steel tube is open at the top-end and fitted with an unscrewable cap at the bottom. A ball check is fitted in the bottom. As soon as the water sampler is lowered it can be lifted again. To assure a proper replacement of the contents during the lowering, the sampler is lifted half a...

  • Eijkelkamp - Model 12.08 - Water Pump With Combustion Engine

    Eijkelkamp - Model 12.08 - Water Pump With Combustion Engine

    This self-priming (up to a depth of 6 meter) centrifugal pump is used primarily for (fast) purging or emptying of monitoring wells and bore holes. Other applications are pumping water for irrigation, drinking water for cattle, etc. The pump has a quiet, reliable starting, economical fourstroke engine running on ordinary or unleaded petrol. The pump is not sensitive to polluted water and the maintenance is minimal and easily executed.

  • Model 04.23.SA - Sediment Core Sampler Type Beeker, Standard

    Model 04.23.SA - Sediment Core Sampler Type Beeker, Standard

    Sediment core sampler type Beeker, rod operated, with closable cutting head and piston. Standard set for sampling and discharging core samples, length 1 m, in bucket or jars. Suitable for sampling submerged soils to a depth of 5 m of very watery sediment to non-consolidated sand.

  • Eijkelkamp - Model Gigant - Submersible Pump

    Eijkelkamp - Model Gigant - Submersible Pump

    Submersible pump 'Gigant', ABS/Inox, Ø 36 mm, maximal capacity 11 l/min, pressure head lift 8.5 m (at final voltage 12 Volt), with strainer, with 5 m pvc coated cable, set of 3 pieces.

  • Model 121208 - Boosterpump

    Model 121208 - Boosterpump

    Boosterpump, in-line, ABS/ stainless steel, Ø 36 mm, maximal flow rate 11 l/min, pressure head lift 8.5 m (at final voltage 12 Volt), with 0.3 m pvc coated cable, set of 3 pieces.