8 products found
The interface boards link your laptop to the sensors, controllers and power supplies used in your setup. They are plug and play devices and connect to your computer via a USB cable. Once you install your ShotoLab Software all you have to do is plug in the USB cable and you are up and running.
ShotoTechnologies Chemical Lab Automation System was designed by Chemists for Chemists. It is an off-the-shelf chemical control system designed to work in the laboratory. The system consists of 3 items: ShotoLab Software. ShotoTechnologies Interface Boards. ShotoTechnologies Power Supply. The system is designed for ease of operation. Once installed use it in 10 minutes or less. The system turns your fume hood into a fully equipped & automated...
The Control Board is the “brain” of the interface board stack and is identified by its green terminal strips. This board connects to your computer via a USB port.
The TC Board was designed to measure various types of input voltages. The TC Board is identified by its black terminal strips. It must be connected to a Control Board to operate. One Control Board supports up to 4 TC Boards. Simply add the spacers needed, connect the ribbon cable to the board, and add a jumper to two pins and you are ready to go.
The SP Board is a specialty board designed with functionality that will aid chemists with their experiments. The SP Board is identified by its orange terminal strips.The SP Board must be connected to a Control Board to operate. One Control Board can support up to 4 SP boards. Simply add the provided spacers, connect the ribbon cable, and add a jumper to two pins and you are ready to go.
The basic ShotoPower Supply contains 3 independently controlled 120VAC outlets that provide up to 1200W of power. They are ideal for controlling heating mantles and heat tapes.
The ShotoPower II contains the same features as the basic ShotoPower but it also contains a 15VDC power supply.The ShotoPower II contains 3 independently controlled 120VAC outlets that provide up to 1200W of total power.
The ShotoPower III is our premier lab controller and power supply.