
9 products found
Teledyne ISCO Products
-
Water and Wastewater - Flow Meter Products
-
-
-
-
-
-
-
-
-
Sign in to XPRT
Don't have an account? Get Started
Enter your email to restore your password
9 products found
Flexible, configurable flow meter for permanent discharge compliance monitoring. The Signature flow meter is designed for open channel flow monitoring applications. It supports flow measurement technologies including bubbler, non-contact laser area velocity, submerged Doppler ultrasonic area velocity, and ultrasonic. The meter can calculate flow using standard open channel level-to-flow and area velocity conversions, as well as user-defined equations,...
The LaserFlow velocity sensor remotely measures flow in open channels with non-contact Laser Doppler Velocity technology and non-contact Ultrasonic Level technology. The sensor uses advanced technology to measure velocity with a laser beam at single or multiple points below the surface of the wastewater stream. The sensor uses an ultrasonic level sensor to measure the level and determines a sub-surface point to measure velocity. The sensor then...
These convenient, single-use sample bags bring a new dimension of productivity to your water and wastewater sampling. Using the patented Teledyne ISCO ProPak sample bag will reduce your sampling costs by eliminating the expense of washing and storing conventional bottles while, at the same time, eliminating worries about contamination from previous samples. For SW846 trace metals analysis, testing shows that ProPaks yielded results equivalent to...
The 3010 is AC powered for permanent installation. It has no internal data storage, but provides 4-20 mA analog and RS-232 serial outputs, as well as relay switches and pulsed DC totalizer outputs for flexible interfacing and control. The ultrasonic level sensor is mounted above the flow stream and transmits a sound pulse that is reflected from the liquid surface. The elapsed time between sending a pulse and receiving an echo determines the level in...
The ProHanger is designed to provide an easy, secure means of suspending down-hole equipment, eliminating the need to enter a manhole. It’s easily adjustable, and features double wingscrew locks. The low-profile tabs allow manhole covers to be set back in place while remaining flush with the surface. We also offer stainless steel suspension harnesses for Isco portable samplers. The harness clips directly to the ProHanger, making sampler...
The Teledyne ISCO high temperature flow-through chamber makes 'dipper' type samplers obsolete, and is ideal for large treatment plants with multiple sampling points spread over a large area. This device allows you to eliminate time-consuming trips to retrieve samples from remote monitoring points. By installing flow-through chambers on transfer lines from monitoring points within your plant, you can collect all your samples in one convenient,...
This accessory was developed to allow sampling from liquid sources with pressure ratings between 10 and 300 psi. Initially, a stainless steel pressure reduction valve decreases source pressure to an acceptable level (10 psi).
Teledyne ISCO 6712 and Avalanche® portable samplers are often deployed in locations that lack utility lines. This cellular modem provides wireless digital communication, reducing the need for costly trips to monitoring sites that are distant and/or difficult to get to, including rural watersheds as well as manholes in high-traffic urban arterials. It allows the sampler to transmit text message alarms to a text-enabled phone or pager, and to...
This digital cellular phone modem enables Isco 6712 samplers (including Avalanche models) to transmit text message alarms to a text-enabled phone or pager. It also allows the sampler to communicate with a modem-equipped PC for remote data retrieval and control. The modem is compatible with user-subscribed GSM digital cell phone service (such as ATT/Cingular, T-Mobile, and Vodaphone). GSM service is available throughout most of Europe, and is...