Toray Chemical Korea

18 products found

Products

  • Spiral Wound Elements

    The reverse osmosis membrane is a thin layer that does not let certain ions permeate through it. Due to its ability to remove ions from solutions, it is mainly used to remove salt from aqueous solutions. Before the 1990’s, cellulose acetate was used as the membrane material but was replaced by a polyamide compound because of it offered higher salt rejection and lower energy costs. Because of its ability to remove dissolved ions in a solution without phase inversion, it is used to remove salt an

  • Reverse Osmosis Membranes for Brackish Water

    Reverse Osmosis Membranes for Brackish Water

    Reverse osmosis membranes are used widely for brackish water desalination. CSM brackish water RO membrane is especially more effective when the feed water is within 10,000 ppm of concentration. Because of its high performance rate and chemical resistance, it can be used for a variety of purposes. It is used in producing drinking water, industrial water, pharmaceutical water, waste water treatment and concentration of food and/or medicine.

  • Reverse Osmosis Membranes for Brackish Water Desalination

    Reverse Osmosis Membranes for Brackish Water Desalination

    Reverse osmosis membranes are used widely for brackish water desalination. CSM brackish water RO membrane is especially more effective when the feed water is within 10,000 ppm of concentration. Because of its high performance rate and chemical resistance, it can be used for a variety of purposes. It is used in producing drinking water, industrial water, pharmaceutical water, waste water treatment and concentration of food and/or medicine.

  • Fouling Resistant for Spiral Wound Elements

    Fouling Resistant for Spiral Wound Elements

    The biggest problem with using the RO membranes can be contamination (or fouling) of the membrane layer. Especially in the case where surface water or wastewater contains highly-concentrated organic substances, the membrane may bear irreparable damage. However, CSM’s Fouling Resistant RO Membranes can significantly reduce such instances. Low amounts of hydrophobic substances (oil and organic) and other particles accumulate on the membrane...

  • RO Membranes for Low Pressure

    RO Membranes for Low Pressure

    Compared to other desalination processes, the use of CSM RO Membranes shows marked improvements in performance, cost-efficiency and more convenient maintenance. However, because energy costs required for the operation of the RO system takes up a large portion of the whole maintenance fee, continued efforts are being made to relieve this burden.

  • Fouling Resistant Membranes

    Fouling Resistant Membranes

    The biggest problem with using the RO membranes can be contamination (or fouling) of the membrane layer. Especially in the case where surface water or wastewater contains highly-concentrated organic substances, the membrane may bear irreparable damage. However, CSM’s Fouling Resistant RO Membranes can significantly reduce such instances.

  • Nanofiltration Membranes

    Nanofiltration Membranes

    Nanofiltration membranes allow for different rejections: monovalent and divalent. It is possible to permeate selectively due to this feature. The main applications are PR solutions, dyes, special chemicals, expensive raw material recovery and pretreatment for removing parts of monovalents: Tone-ions and rejecting divalent Tone-ions in seawater processes.

  • RO Membranes for Sea Water

    RO Membranes for Sea Water

    The salinity of seawater varies from 3 to 5% depending on different regions and due to this variance it is a challenge to use this abundant water resource for potable or industrial water. CSM’s Seawater RO Membranes, with its high rejection of salts, boron and TDS (more than 10,000 ppm), are able to transform high salinity waters into high grade industrial and potable water safe for human consumption.

  • Ultrapure Water RO Elements

    Ultrapure Water RO Elements

    CSM Ultrapure Water RO elements are used to produce process water used for the manufacturing of electronics and semiconductors. These elements have high TOC rejection, low TOC extraction and TOC rinse down.

  • RO Membranes for Residential

    RO Membranes for Residential

    Water is one of the most essential elements for sustaining human life. However, we face health risks from exposure to microbial & various contaminants that may be present in the water we drink. With the use of CSM’s Residential RO Membranes, 100% of viruses and over 99% of chemical substances are removed meaning we can enjoy clean, great tasting and most importantly safe water at home.

  • Nanofiltration Membranes

    Nanofiltration Membranes

    Nanofiltration membranes allow for different rejections: monovalent and divalent. It is possible to permeate selectively due to this feature. The main applications are PR solutions, dyes, special chemicals, expensive raw material recovery and pretreatment for removing parts of monovalents: Tone-ions and rejecting divalent Tone-ions in seawater processes.

  • Ultrafiltration Membranes

    Ultrafiltration Membranes

    Ultrafiltration membranes cannot remove dissolved ions but can remove small particles usually anything under 0.01μm (1/106 of hair). It can be used for pretreatment, ultrapure water polishing and residential water treatment.

  • Catridge and Micro Filters - Industrial Applications

    CSM cartridge and micro-filters for industrial applications are widely used by the pharmaceutical, automobile, and food & beverage industries.

  • Hydrophobic PTFE Membrane Filter

    Hydrophobic PTFE Membrane Filter

    CSM hydrophobic PTFE pleated cartridges have superior flow rate and efficiency maximizing the performance of the teflon media cartridge. CSM hydrophobic PTFE cartridge are manufactured from teflon membrane and polypropylene components for broad application compatibility.

  • Hydrophilic Membrane Filter

    Hydrophilic Membrane Filter

    CSM hydrophilic nylon66 pleated cartridge superior flow rate and efficiency maximizing the performance of the nylon66 media cartridge. CSM hydrophilic nylon66 cartridge are manufactured from N66 membrane and polypropylene components for broad application compatibility.

  • Flomax - Model PP - Pleated Cartridge Filter

    Flomax - Model PP - Pleated Cartridge Filter

    Flomax 100% polypropylene media & support construction offers excellent chemical and heat resistance. All polypropylene components and thermal bonded manufacturing enable the smallest contaminant extraction and higher durability. Flomax filter series are manufactured in an ISO 9001 quality systems standard registered clean-room facility.

  • Model G/F (Glass) - Glass Fiber Pleated Cartridge Filter

    Model G/F (Glass) - Glass Fiber Pleated Cartridge Filter

    Constructed of high quality glass fiber media, G/F cartridges are suited for high viscosity, flow process, Binder-free borosilicate glass fiber has no added extractables, Cartridges are sealed with thermal bonding processwithout the use of adhesives to ensure lowest extractables.

  • Model Sumax - Polysulfone Pleated Cartridge Filter

    Model Sumax - Polysulfone Pleated Cartridge Filter

    Sumax cartridges are constructed of polysulfone micro-porous membrane and polypropylene support components enable superior durability and particle removal performance and can be used in various applications. Integrity tested after manufacturing using bubble point and air diffusion.

  • Model Flomax D Cartridge - Special Section Filter

    Model Flomax D Cartridge - Special Section Filter

    CMP (Chemical Mechanical Planarization) filter cartridges is constructed of polypropylene microfibers with absolute removal ratings. Multi-layer depth structure assures high dirt holding capacity and long service life. Consistent and reproducible performance. Available in many removal ratings and configurations; low extractables.