Products and Equipment from Torraval Cooling S.L

Model RM Series - Cooling Towers

RM series are induced draught cooling towers, counter-flow with axial fans. These are high efficiency equipments, capable of cooling flows from up to 1.700 m3/h per cell. Their design and conception is focused on industrial processes, where, depending on the selected type of fillings, any water qualities can be treated. Its structure covered with polyester screens with fiberglass (GRP) provides them with high wear resistance and a remarkable...

Model OC Series - Cooling Towers

OC series are induced draught cooling towers, counter-flow with axial fans. We are talking about equipments capable of cooling flows from up to 5.500 m3/h per cell, which makes them suitable for industrial processes. Depending on the selected type of fillings, they are prepared to cool any water quality. Its concrete structure can be covered with polyester screen with fiberglass (GRP) or work blocks, always in accordance with the design criteria that...

Model PMM Series - Open Circuit Cooling Towers

PMM are open circuit cooling towers of counter-flow composed of factory pre-assembled modules. Its capacity goes from 2.6 to 14 MW (aproximate value, taking as a reference a cell, a thermal range of 5ºC, laminar filling of 19 mm and modular systems). The PMM series is proposed in big-size plants. Each unit is engineered according to the technical data of the relevant project. All models are made of factory pre-assembled modules and components....

Model CTFP Series - Open Circuit Cooling Towers

Cooling towers from CTFP are series of open circuit evaporative towers of forced draft, with axial fan directly coupled to the engine and countercurrent flow . They are modular towers manufactured in reinforced polyester with fiberglass, building compact monobloc devices of extraordinarily operating reliability and long life. They can reach to cool water flows up to 250 m3/h per cell.

Model PMS-D Series - Open Circuit Cooling Towers

PMS-D Cooling towers are of induced draft with axial fan directly coupled to the engine and countercurrent flow. They are completely made of polyester reinforced with fiberglass to avoid corrosion problems caused by the fact that the tower is in constant contact with the water-to-refrigerate and be exposed to all weather conditions. It has a self-supporting monobloc housing and it's reinforced at the points that support higher static and dynamic...

Model PME-E Series - Cooling Towers

The PME-E series cooling towers are manufactured with a high thickness (3-5 mm) steel bearing frame, which is hot-dip galvanized after all works and with fibreglass sandwich panels of 22 mm thickness. This kind of panel is made by a double laminated layer with supporting expanded material in between. This construction grants, also on large surfaces, a great mechanical strength and a good dropping water noise absorption. The surface of...

Model HBR Series - Cooling Towers

HBR series is the result of the long experience of MITA technicians. It combines the well-known TORRAVAL’s distinguishing feature of corrosion-free products with an easy and innovative working principle,designed to reduce water and energy consumption to a minimum.. The distinctive characteristic of the HBR hybrid cooler is that it has two separate air circuits at its disposal. The system is realized thanks to...

Adiabatic Cooler / Condenser

The cooler operation is automatically controlled by an electrical control panel provided with factory-programmed PLC according to required mode of operation.

Evaporative Condenser

The evaporative condenser is a particular refrigerant condenser that exploits the same physical principle of the cooling tower in order to dissipate the heat. The refrigerant (hydrohalocarbon or ammonia) to be condensed enters the upper header of a coil which is constantly wetted by the recirculating water of the small, pre-assembled evaporative circuit of the unit. The evaporation of a part of the recirculating water removes the heat from the heat...

Model Adiabatic subcooler - Alchemist

The adiabatic subcooler Alchemist is an efficient solution to HFC cooler systems updates in order to increase the efficiency of CO2 cooling systems. The adiabatic cooling process: the air is moistened before coming into contact with the coil in order to lower the temperature and increase the efficiency of the system (even in the hottest periods). Alchemist increases cooling system efficiency by combining adiabatic cooling with coolant...

Model MCT Series - Open Circuit Cooling Tower

The open circuit cooling towers, MCT series are recommended for small/mediumsized and indoor installations. • Tower body and tank are made of fibreglass, (corrosion-free material). • Fill pack in PVC or PP with a high heat exchange surface. • Distribution system in PVC or PP equipped with wide non-clogging PP spray nozzles. • Low noise levels thanks to centrifugal motor-fan with transmission belt. • Air inlet and outlet silencers. • Indicative capacity...

Model Spare Parts - Mechanical Equipment

Cooling equipment components have an important influence on thermal efficiency, so the system must be replaced periodically due to wear and tear. Torraval guarantees the replacement of these components and thus avoid the risk of premature breakdowns: MECHANICAL EQUIPMENT: • FAN • ELECTRIC MOTOR • REDUCER • TRANSMISSION (Recognized brands and variety of materials depending on environmental conditions)

Model Spare Parts - Fillers

There are several types of fillers depending on the quality of the water: • LAMINAR • MIXED • SPLASH

Model Spare Parts - Drop Separator

The droplet separator is made of sheets of PVC or PP. It minimizes water loss by dragged, located above the distribution system. It satisfies with health and hygiene criteria for the prevention and control of legionella bacteria (established by Royal Decree 865/2003 of July 4) Only a cooling tower manufacturer is able to guarantee these standards and certification.

Distribution System

• OPEN CHANNELS in GRP: facilitate maintenance. • DISPERSING PLATES • TUBES

MCC Closed circuit tower. Hybrid refrigerator

The closed circuit cooling tower MCC works in free cooling: the fluid circulates inside a tube evaporator coil. It is suggested as an alternative to open cooling circuits with heat exchangers, since the cooling liquid cannot be polluted by external agents.

Torraval Cooling S.L - part of The MITA group Products

Field Erected Cooling Towers