Turner Designs Hydrocarbon Instruments, Inc.

18 products found

Turner Designs Hydrocarbon Instruments, Inc. Products

  • TDHI - Model TD-560 - Dual-Channel Oil in Water Analyzer

    TDHI - Model TD-560 - Dual-Channel Oil in Water Analyzer

    Turner Designs Hydrocarbon Instruments proudly announces the all new dual-channel TD-560 Oil in Water Analyzer. In addition to the optical channel found in the TD-550, suitable for crude and other heavy oils, the TD-560 adds a second channel for detecting lighter hydrocarbons, such as BTEX, gas condensates, gasoline, jet fuel, kerosene, transformer oils, styrene and phenol. The TD-560 offers a greatly enhanced detection range (low ppb to 5000 ppm)...

  • TDHI - Model TD-550 - Oil in Water Analyzer

    TDHI - Model TD-550 - Oil in Water Analyzer

    Turner Designs Hydrocarbon Instruments is proud to introduce the new standard in grab sample oil in water analysis with the TD-550 oil in water analyzer. The TD-550 is suitable for crude oils and other heavy oils with a greatly enhanced detection range (low ppb to 5000 ppm) over most oil in water analyzers.  Also new, the TD-560 includes the same optical channel of the TD-550 along with a second optical channel for detecting lighter hydrocarbons...

  • TDHI - Model TD-120 - Oil in Water Monitor

    TDHI - Model TD-120 - Oil in Water Monitor

    The TD-120 Oil in Water Monitor is our latest product, developed from over 20 years of real-world experience with UV fluorescence technology, and includes industry leading features. The TD-120 Oil in Water Monitor is resistant to dirty or turbid water influences that typically impact UV absorption or light scatter instrument measurements—allowing hydrocarbons, fuels, lubricating oils, heat transfer fluids, and crude oil to be measured...

  • TDHI - Model CF-200 - Algae Monitor System

    TDHI - Model CF-200 - Algae Monitor System

    Turner Designs Hydrocarbon Instruments, in partnership with Benchmark International, is proud to present the CF-200 Algae Monitor. Using the C-Fluor fluorescence probe, the online monitor is fully integrated and ready to detect Chlorophyll A in fresh or sea water. Plankton biomass in sea water can be variable by season, weather and other uncontrollable conditions. Industrial plants with sea water intake can be affected by high plankton concentrations....

  • TDHI - Model TD-4100XD - Continuous On-Line Oil in Water Monitor

    TDHI - Model TD-4100XD - Continuous On-Line Oil in Water Monitor

    The TD-4100XD is a ruggedized version of the TD-4100 continuous online oil in water monitor. The XD is designed specifically for offshore oil production, refining, petrochemical, mining, and other industries that require robust online hardware for severe duty and hazardous area locations. The monitor is skid or wall mounted and constructed of 316 stainless steel. It also includes an external keypad for operation in corrosive environments. The...

  • TDHI - Model TD-4100XD - General Purpose Monitor

    TDHI - Model TD-4100XD - General Purpose Monitor

    The TD-4100XD General Purpose monitor is a lower cost version of the industry standard TD-4100XD and is designed for use in non-explosive atmospheres. It was designed for dirty water applications and uses our standard EZ Access noncontact flow cell for lower maintenance. Field validation is via our CheckPOINT™ solid calibration check standard.

  • TDHI - Model TD-4100XDC - Oil in Water Monitor

    TDHI - Model TD-4100XDC - Oil in Water Monitor

    The TD-4100XDC is a closed cell version of the rugged, world industry standard TD-4100XD Oil in Water Monitor. It was designed for normally clean water applications or dirty water applications where fouling can be controlled by chemical injection or optional onboard cleaning systems. It utilizes a clear tube flow cell to contain the sample water at pressure to prevent oxygen contamination in steam systems and to return the sample to the process at...

  • TDHI - Model TD-4100XDC - General Purpose Oil in Water Monitor

    TDHI - Model TD-4100XDC - General Purpose Oil in Water Monitor

    The TD-4100XDC General Purpose oil in water monitor is a lower cost version of the industry standard TD-4100XDC and is designed for use in non-explosive atmospheres. It was designed for normally clean water applications, or dirty water applications where fouling can be controlled by chemical injection or optional onboard cleaning systems. It uses a clear tube flow cell to contain the sample water at pressure, prevent oxygen contamination in...

  • TDHI - Model TD - Sample Thief

    TDHI - Model TD - Sample Thief

    Online water analyzers can be challenged by process upsets and  unexpected conditions that push measurements out of range or  foul the sensor. Because upset conditions can be short lived, they make it difficult to collect a sample.

  • TDHI - Clean-In-Place (CIP) System for Oil in Water Monitors

    TDHI - Clean-In-Place (CIP) System for Oil in Water Monitors

    Most oilfield produced waters and other oily waste waters have high fouling potential for optical sensors. High cost ultrasonic cleaning systems only address the local optical path and not the entire sample system. Our clean-in-place (CIP) system addresses the entire sample system in the same way that CIPs are used to clean heat exchangers and other oily systems.

  • TDHI CheckPOINT - Solid Calibration Standard

    TDHI CheckPOINT - Solid Calibration Standard

    Solid Calibration Standards for the TD-500D, TD-3100, and TD-4100 Series Instruments Instantly calibrate or check instrument performance without preparing liquid standards. Insert the CheckPOINT TM Solid Standard (patent pending) probe into the inspection port of your Turner Designs online oil in water monitor, or place it in the sample compartment of the lab instrument to check instrument calibration and performance. The CheckPOINT Solid Standard...

  • TDHI - Model EZ - Easy Access Falling Stream Flow Cell

    TDHI - Model EZ - Easy Access Falling Stream Flow Cell

    The EZ Access falling stream flow cell for TD-4100 and TD-4100XD oil in water monitors provides easy access for window cleaning and emission filter change from the front of the monitor, without any disassembly. Customers enjoy all the benefits of our noncontact falling stream flow cell, plus pressure proof optical windows (100 psig) to prevent flooding in plugged drain situations.

  • Cuvette Caddy - Sample Analysis Accessory for TD-500D

    Cuvette Caddy - Sample Analysis Accessory for TD-500D

    Now available from Turner Designs Hydrocarbon Instruments, the Cuvette Caddy is the perfect accessory for sample analysis with the TD-500D. This double-sided stainless steel accessory holds mini-cells, 8 mm cuvettes, sample well adapters and CheckPOINTTM solid standards. Using this holder greatly eases filling cuvettes and helps avoid spills and fouling. The top plate of the caddy serves as a cuvette minimum fill line. The holder is also labeled for...

  • TDHI - Model TD-500D - Dual Channel Handheld Oil in Water Analyzer

    TDHI - Model TD-500D - Dual Channel Handheld Oil in Water Analyzer

    The TD-500D is the least expensive, lightest, smallest, easiest to use, most accurate and most repeatable device on the market for measuring crude oil and condensates in produced water, de-salter tail water, tank bottoms, cargo heaters, or anywhere that crude oil comes in contact with water.

  • TDHI - Model TD-5100 ECA - Scrubber Wash Water Overboard Discharge Monitor

    TDHI - Model TD-5100 ECA - Scrubber Wash Water Overboard Discharge Monitor

    Marine exhaust gas scrubbing systems for heavy fuel oil burning ships are becoming main stream, with various configurations including open loop, closed loop, and hybrid systems. Oxides of sulfur and nitrogen, along with particulates and unburned hydrocarbons, are removed into the very high volumes of wash water sprayed into the exhaust scrubber system. The wash water can be a combination of seawater, which has a natural...

  • TDHI - Model TD-3100 - Benchtop Analyzer

    TDHI - Model TD-3100 - Benchtop Analyzer

    The TD-3100 is a low cost benchtop instrument that was developed to provide an alternative to industry standard oil and grease methods. Measure samples directly (non-extraction) or with solvent (e.g., hexane) extraction methods.

  • TDHI - Model NexTD - Next Generation Oil in Water Monitor

    TDHI - Model NexTD - Next Generation Oil in Water Monitor

    Protecting the environment from unwanted hydrocarbon discharges, protecting sensitive water treatment systems from unwanted oil contamination, and 24/7 monitoring of industrial processes to prevent upsets has been the sole purpose of Turner Designs Hydrocarbon Instruments and its team for more than 20 years. Continuous improvement of field measurement, ease of use, and reliability has led to the development of our NexTD oil in water...