40 products found
VEGA Americas, Inc. Products
-
Level Measurement - Liquids - Radar
In non-contact level measurement with radar, the measuring instrument sends microwave signals from above to the medium, which reflects them. The distance to the product surface is determined on the basis of the microwave signals received by the measuring instrument and the level is calculated.
-
VEGAPULS - Model 6X - Radar Sensor for Continuous Level Measurement of Liquids and Bulk Solids
All-round radar measuring device - VEGAPULS 6X combines the best of the previous VEGAPULS 60 series. VEGAPULS 6X is a universal sensor for continuous level measurement of liquids and bulk solids under all process conditions. Due to its application-oriented configuration and setup, VEGAPULS 6X offers a reliable and economical solution for all level applications. Due to its variable antenna systems, it ensures maintenance-free operation in all ...
-
VEGAPULS - Model C 11 - Wired Radar Sensor for Continuous Level Measurement
For simple measuring tasks, IP66/IP68, Type 6P. Application area: Axial cable outlet, 4 ... 20 mA output, measuring range up to 8 m, accuracy ±5 mm, PVC cable with 10 m length. VEGAPULS C 11 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations, rain overflow basins and level monitoring. In bulk solids ...VEGAPULS - Model 11 - Compact Radar Sensor for Continuous Level Measurement
For simple measuring tasks, plastic housing IP66/IP67, Type 4X. Application area: 4 ... 20 mA output, measuring range up to 8 m, accuracy ±5 mm. VEGAPULS 11 is the ideal sensor for non-contact level measurement of liquids and bulk solids in simple applications. It is particularly suitable for use in water treatment, storage tanks with acids, lyes and additives in all industrial areas, or for measuring levels in plastic tanks from the ...
VEGAPULS - Model 21 - Compact Radar Sensor for Continuous Level Measurement
For standard measuring tasks, plastic housing IP66/IP67, Type 4X. Application area: 4 ... 20 mA/HART output, measuring range up to 15 m, accuracy ±2 mm, Ex approval. VEGAPULS 21 is the ideal sensor for non-contact level measurement of liquids and bulk solids in simple applications. It is particularly suitable for use in water treatment, storage tanks with acids, lyes and additives in all industrial areas, or for measuring levels in plastic tanks ...
VEGAPULS - Model 31 - Compact Radar Sensor for Continuous Level Measurement
For standard measuring tasks, plastic housing IP66/IP67, type 4X, display. Application area: 4 ... 20 mA/HART output, measuring range up to 15 m, accuracy ±2 mm, Ex approval, on-site display and 3-button operation. VEGAPULS 31 is the ideal sensor for non-contact level measurement of liquids and bulk solids in simple applications. It is particularly suitable for use in water treatment, storage tanks with acids, lyes and additives in all ...
Level Measurement - Liquids - Guided Wave Radar
In level measurement with guided radar, radar pulses are guided along a cable or rod probe and reflected back by the product surface. The measuring probe of the TDR sensor ensures that the signal travels down to the medium undisturbed. This measuring technique is used to measure liquids, bulk solids and interfaces in liquids.
VEGAFLEX - Model 81 - TDR Sensor for Continuous Level and Interface Measurement Of Liquids
Universal TDR sensor for liquids of all kinds. Application area: Cable, rod or coaxial sensor. Even in applications with steam, buildup, foam or condensation, the sensor delivers precise and reliable readings – also in standpipes or bypass pipes. The VEGAFLEX 81 level sensor measures maintenance-free all kind of liquids. Even in applications with vapour, buildup, foam generation and condensation, the sensor delivers precise and reliable measured ...
VEGAFLEX - Model 83 - TDR Sensor for Continuous Level and Interface Measurement Of Liquids
For aggressive media or extremely high hygienic requirements. Application area: PFA coated or polished sensor. Even in applications with steam, buildup, foam or condensation, the sensor delivers precise and reliable readings. The VEGAFLEX 83 level sensor measures maintenance-free agressive liquids or liquid media with highest hygienic requirements. Even in applications with vapour, buildup, foam generation and condensation, the sensor delivers precise ...
VEGAFLEX - Model 86 - TDR Sensor for Continuous Level and Interface Measurement Of Liquids
For the most extreme process conditions. Application area: Cable, rod or coaxial sensor. Its robust, mechanical design and the second process seal, the Second Line of Defense, protect the sensor for demanding measurement tasks. Process temperature: -196 ... 450° C; process pressure: -1 … 400 bar. The VEGAFLEX 86 level sensor measures maintenance-free all liquids under extreme pressure and temperature conditions. Even in ...
Level Measurement - Liquids - Ultrasonic
In non-contact ultrasonic level measurement, the sensor emits ultrasonic pulses in the direction of the medium, which reflects them. The time from transmission to reception of the signals is proportional to the level in the vessel.
VEGASON - Model 61 - Ultrasonic Sensor for Continuous Level Measurement
Measures liquids up to 5 m and bulk solids up to 2 m away. Application area: Extensive selection of electronics, housings, approvals. Process fittings: G1½ or 1½ NPT. The VEGASON 61 is an ultrasonic sensor for continuous level measurement of liquids or bulk solids. Typical applications are the measurement of liquids in storage tanks or open basins. The sensor is also suitable for the detection of bulk solids in small vessels or open ...
VEGASON - Model 62 - Ultrasonic Sensor for Continuous Level Measurement
Measures liquids up to 8 m and bulk solids up to 3.5 m away. Application area: Extensive selection of electronics, housings, approvals. Process fittings: G2 or 2 NPT. The VEGASON 62 is an ultrasonic sensor for continuous level measurement of liquids and bulk solids. Typical applications are the measurement of liquids in storage vessels or open basins. The sensor is also suitable for the detection of bulk solids in small vessels or silos. Application ...
Level Measurement - Liquids - Capacitive
In capacitive level measurement, capacitive sensor and vessel form the two electrodes of a capacitor. Any change in capacitance due to a level change is converted into a level signal.
VEGACAL - Model 62 - Capacitive Rod Probe for Continuous Level Measurement
Rod probe, partly PTFE insulated. Application area: For measurement of bulk solids and non-conductive liquids such as oil. A full/empty adjustment is necessary for setup. The VEGACAL 62 is a level sensor for continuous level measurement in all industries. The partly insulated probe is designed for measurement of bulk solids and can be also used in non-conductive liquids such as e.g. oil. The proven construction offers high functional ...
VEGACAL - Model 63 - Capacitive Rod Probe for Continuous Level Measurement
Rod probe, fully PE or PTFE insulated. Application area: For measurement in conductive and non-conductive liquids. A full/empty adjustment is necessary for setup. The VEGACAL 63 level sensor can be used universally for the measurement of conductive and non-conductive liquids. The rod electrode is fully insulated and the proven mechanical construction offers high functional ...
VEGACAL - Model 64 - Capacitive Rod Probe for Continuous Level Measurement of Adhesive Products
Rod probe, fully FEP insulated. Application area: For conductive and non-conductive liquids. The rod measuring probe is fully insulated and especially suitable for viscous and adhesive products. A full/empty adjustment is necessary for setup. The VEGACAL 64 is a level sensor for conductive and non-conductive liquids. The rod electrode is fully insulated and is particularly suitable for viscous and adhesive ...
Level Measurement - Liquids - Hydrostatic
In hydrostatic level measurement, the measuring cell of the pressure transmitter detects the tiniest changes in hydrostatic pressure, which increases or decreases depending on the level. The acting pressure is converted into an electrical signal and converted into an output signal by the integrated electronics.
VEGABAR - Model 29 - Pressure Sensor with Switching Function
With metallic measuring cell. Application area: From thread ½", hygienic connections, universal connection G1" for hygiene adapter, 4 ... 20 mA, three-wire: PNP/NPN, 4 ... 20 mA, IO-Link, Ex and hygiene approval, coloured 360° status display. VEGABAR 29 is a universal pressure transmitter with metal measuring cell for measurement of gases, vapours and liquids up to 130 °C. The optional universal connection for hygienic adapters ensures ...
VEGABAR - Model 38 - Pressure Sensor with Switching Function
With ceramic measuring cell. Application area: From thread ½", hygienic connections, universal connection G1" for hygiene adapter, 4 ... 20 mA, three-wire: PNP/NPN, 4 ... 20 mA, IO-Link, Ex and hygiene approval, coloured 360° status display, on-site display and 3-button operation.VEGABAR 38 is a universal pressure transmitter with ceramic measuring cell for measuring gases, vapours and liquids up to 130 °C. The optional universal ...
VEGABAR - Model 39 - Pressure Sensor with Switching Function
With metallic measuring cell. Application area: From thread ½", hygienic connections, universal connection G1" for hygiene adapter, 4 ... 20 mA, three-wire: PNP/NPN, 4 ... 20 mA, IO-Link, Ex and hygiene approval, coloured 360° status display, on-site display and 3-button operation. VEGABAR 39 is a universal pressure transmitter with a metallic measuring cell for measuring gases, vapours and liquids up 130 °C. The optional universal ...
VEGABAR - Model 82 - Pressure Transmitter with Ceramic Measuring Cell
The all-rounder with ceramic measuring cell. Application area: Universally applicable pressure transmitter. The ceramic measuring cell is resistant to temperature shocks. Can be combined with any other sensor of VEGABAR Series 80 for electronic differential pressure measurement. The VEGABAR 82 pressure transmitter can be used universally for the measurement of gases, vapours and liquids. Substances such as sand can be handled easily thanks to the ...
VEGABAR - Model 81 - Pressure Transmitter with Chemical Seal
Application area: Reliable measurement of highly corrosive and hot media. Can be combined with any other sensor of VEGABAR Series 80 for electronic differential pressure measurement. The VEGABAR 81 is a pressure transmitter with chemical seal for pressure and level measurement. The chemical seal systems of VEGABAR 81 adapted to the process, ensure a reliable measurement even with highly corrosive and hot products. The simple connection of VEGABAR ...
VEGADIF - Model 85 - Differential Pressure Measurement for All Media
With metallic measuring diaphragm. Application area: For applications with liquids in small containers under simple process conditions. Possible applications can be found in almost all industrial sectors. The VEGADIF 85 is a universal differential pressure transmitter for measurement of liquids, gases and vapours. Typical application areas are level measurement in pressurized vessels as well as flow measurement in combination with effective pressure ...
VEGABAR - Model 83 - Pressure Transmitter with Metallic Measuring Cell
With metallic measuring cell, for high pressures. Application area: For measurement of liquids and viscous products with high process pressure. The VEGABAR 83 is a pressure transmitter for pressure measurement of gases, vapours and liquids in all industries. The VEGABAR 83 offers special advantages in applications with high pressures. The simple connection of VEGABAR series 80 sensors as electronic differential pressure opens new possibilities for the ...
VEGAWELL - Model 52 - Submersible Pressure Transmitter with Ceramic Measuring Cell
With ceramic measuring cell. Application area: The hydrostatic absolute pressure transmitter with ceramic measuring cell is ideal for level measurement of water/wastewater, as well as level measurement in deep wells or in tanks on ships. Maximum cable length = 1000 m. The VEGAWELL 52 is suitable for continuous level measurement of liquids. Typical applications are measurements in water/waste water, deep wells and in the shipbuilding ...
Level Measurement - Liquids - Radiation-Based
In radiometric, i.e. radiation-based, level measurement, a slightly radioactive isotope emits focused gamma rays. The sensor, which is mounted on the opposite side of the vessel, receives this radiation. Since gamma rays are attenuated when penetrating matter, the sensor can calculate level, point level, density or mass flow from the intensity of the incoming radiation.
FiberTrac 31 - Radiometric Sensor for Continuous Level Measurement
Application area: The flexible detector is used on round vessels and vessels with conical outlet and is suitable for measurement of liquids, solids, slurries and suspensions. Due to its thin, flexible scintillator cross-section, FIBERTRAC 31 can be easily adapted to round vessels. The FIBERTRAC 31 is a radiation-based sensor with flexible plastic sensing element for continuous measurement of liquids and bulk solids. It is suitable for level measurement ...
FIBERTRAC - Model 32 - Radiometric Sensor for Continuous Level and Interface Measurement
Application area: The flexible detector is used on round vessels and vessels with conical outlet and is suitable for measurement of liquids, solids, slurries and suspensions. Due to the larger scintillator cross-section, FIBERTRAC 32 has higher sensitivity and accuracy FIBERTRAC 32 is a radiation-based sensor for continuous measurement of liquids and bulk solids. It is suitable for level and interface measurement under extreme process temperatures, in ...
SOLITRAC - Model 31 - Radiometric Sensor for Continuous Level Measurement
Application area: SOLITRAC 31 is ideal for use on cylindrical vessels, reactors, autoclaves, separators and mixing vessels. SOLITRAC offers extraordinarily high accuracy over the entire measuring range. The SOLITRAC 31 is a radiation-based sensor with PVT rod detector for continuous measurement of liquids and bulk solids. It is suitable for level measurement under extreme process conditions, with critical product features or in aggressive products. The ...
Level Measurement - Liquids - Magnetic Level Indicator (MLI) Bridle
VEGAMAG: Magnetic level indicator.
VEGAMAG - Model 81 - Magnetic Level Indicator (MLI)
The VEGAMAG 81 magnetic indicator consists of a bypass, which is mounted as a communicating tube on the side of an existing vessel. The float used in the bypass with integrated permanent magnet system transmits the liquid level contactlessly to the magnetic display mounted on the outside of the bypass. Thus, the level of a vessel is displayed on the magnetic indicator without external energy and can be seen from ...
VEGAMAG - Model 82 Series - Combination Magnetic Level Indicator and Bypass Bridle Chamber
The VEGAMAG 82 series combination magnetic level indicator and Bypass bridle chamber provides the benefits of both visual indication and process control by using the proven technology of the VEGAFLEX to provide the most complete visual and guided microwave radar package in the industry. The VEGAMAG 82 can be configured to mount to most standard tank process connections as well as applications where interface measurements are ...VEGAMAG - Model 83 - Magnetic Level Indicator (MLI)
VEGAMAG 83 The VEGAMAG 83 is ideal for processes with low dielectric constant values, cryogenic applications, or light hydrocarbons. The chamber’s compact design provides a smaller installation envelope and lighter weight for easier mounting. The VEGAMAG 83 pairs with a non-contact VEGAPULS radar instrument in the same chamber as the magnetic float. By using this unique design, the radar is able to track the metallic float top rather than the ...
Level Measurement - Bulk Solids
In continuous level measurement, the level of a medium in a tank or silo is detected with the help of different measuring methods and converted into an electronic signal. The level signal is either displayed directly on site or incorporated into a process control or management system.
VEGAPULS - Model 42 - Compact Radar Sensor for Continuous Level Measurement
For simple to moderate measurement tasks in factory automation. Application area: From ¾ thread", universal connection G1" for hygiene adapter, three-wire: IO-Link, PNP/NPN, 4 ... 20 mA (active), hygiene approval, coloured 360° status display. VEGAPULS 42 is the ideal sensor for non-contact level measurement of liquids and bulk solids in simple to moderate applications. The optional universal connection for hygienic adapters ensures reduced ...
VEGAPULS - Model C 21 - Wired Radar Sensor for Continuous Level Measurement
For standard measuring tasks, IP66/IP68, Type 6P. Application area: Axial cable outlet, measuring range up to 15 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex-approval. VEGAPULS C 21 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations and rain overflow basins, for flow measurement in ...
VEGAPULS - Model C 22 - Wired Radar Sensor for Continuous Level Measurement
For standard measuring tasks, IP66/IP68, Type 6P. Application area: Lateral cable outlet, measuring range up to 15 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex approval. VEGAPULS C 22 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations and rain overflow basins, for flow measurement ...
VEGAPULS - Model C 23 - Wired Radar Sensor for Continuous Level Measurement
For standard measuring tasks, IP66/IP68, Type 6P. Application area: Axial cable outlet, measuring range up to 30 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex-approval. VEGAPULS C 23 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations and rain overflow basins, for flow measurement in ...
VEGAPULS Air - Model 23 - Autarkic, Continuous Level Measurement in Plastic Vessels Sensor
Autarkic sensor with measured value transmission by radio technology. Application area: NB-IoT/CAT-M1, LoRa, measuring range up to 3m, accuracy +/-5mm. VEGAPULS Air 23 is the ideal sensor for level measurement in IBCs and plastic vessels. The instrument measures through the closed vessel ceiling and is suitable for nearly all liquids and bulk solids. VEGAPULS Air 23 is quickly mounted by simple and reliable adhesive, ceiling or tension belt mounting. ...
Level Switches - Vibration
In point level measurement with vibrating level switches, a rod or a fork is set vibrating. When the vibrating probe comes into contact with the medium, the vibration changes and the vibrating level switch outputs a switching command. Vibrating level switches are used as overfill protection devices or low-level indicators in liquids as well as in granular and powdery bulk solids.
VEGASWING - Model 51 - Vibrating Level Switch for Liquids
Application area: It detects the limit level reliably and with millimetre accuracy directly at the mounting position. Small level switch version with stainless steel housing. The VEGASWING 51 is a universal level switch with small dimensions for use in liquids. Independent of the mounting position, it detects reliably with millimetre accuracy the limit level. The instrument can be used as empty or full detector, as approved overfill protection, dry ...VEGASWING - Model 53 - Vibrating Level Switch for Liquids
For liquids (density: > 0.5 ... 2.5 g/cm³) – with tube extension. Application area: The position of the switching point can be up to 1 m away from the installation location. VEGASWING 53 is a universal liquid level switch with smallest dimensions. Independent of the mounting position, it detects the limit level reliably and with millimetre accuracy. The device can be used for full or empty alarm, as approved overfill protection or dry run ...
VEGASWING - Model 61 - Vibrating Level Switch for Liquids
For liquids (density: > 0.5 ... 2.5 g/cm³) – compact version. Application area: It detects the limit level reliably and with millimetre accuracy directly at the mounting position. Numerous process fittings, approvals as well as housing and electronics versions. The VEGASWING 61 is a universal level switch for use in all liquids. Independent of the mounting position, it detects reliably with millimetre accuracy the limit level. The ...
Level Switches - Capacitive
In capacitive point level detection, the sensor and vessel form the two electrodes of a capacitor. Any capacitance change caused by a level change is converted into a switching signal. Thanks to the shortenable cable and rod versions, level switches can be perfectly adapted to any application. They are often used for overfill or dry run protection as well as oil/water or foam detection.
VEGAPOINT - Model 11 - Ultra-Compact Capacitive Limit Switch
For the detection of water-based liquids. Application area: From DK > 2, from thread ½", universal connection G1" for hygiene adapter, M12, transistor output. VEGAPOINT 11 is a low-cost limit switch for the detection of water-based liquids. The optional universal connection for hygiene adapters ensures reduced installation effort and leaner stock keeping and perfectly meets the requirements for hygienic processes in the food, beverage and ...
VEGAPOINT - Model 21 - Ultra-Compact Capacitive Limit Switch
For the detection of water-based liquids. Application area: From DK > 1.5, from thread ½", universal connection G1" for hygiene adapter, M12, valve plug, transistor output, IO-Link, wireless operation, Ex and hygiene approvals. VEGAPOINT 21 is a low-cost limit switch for the detection of water-based liquids. The optional universal connection for hygiene adapters ensures reduced installation effort and leaner stock keeping and perfectly meets ...
VEGAPOINT - Model 23 - Compact Capacitive Limit Switch with Tube Extension
For the detection of water-based liquids. Application area: From DK > 1.5, from thread ½", universal connection G1" for hygiene adapter, M12, valve plug, transistor output, IO-Link, wireless operation, Ex and hygiene approvals, tube version, up to 1 m. VEGAPOINT 23 is a limit switch with remote switching point for detection of water-based liquids. The optional universal connection for hygiene adapters ensures reduced installation effort and ...
Level Switches - Conductive
When the electrodes of the conductive point level sensor come into contact with a conductive fluid, a small alternating current begins to flow. The electronics then triggers a switching command. Conductive point level sensors are used in all areas of industrial instrumentation, e.g. as overflow protection, pump control or dry run protection.
VEGAKON - Model 61 - Conductive Limit Switch for Liquids Front-Flush Mounting
Compact level switch with partial PTFE insulation. Application area: For front-flush installation. The instrument is ideally suited as full or empty detector in pipelines. The VEGAKON 61 is a condcutive limit switch for conductive liquids. The instrument is best suited as full and empty detector in ...
VEGAKON - Model 66 - Conductive Multiple Rod Limit Switch for Liquids
Multiple rod level switch with PP insulation. Application area: With 2 to 3 rods, a corresponding number of switching points between 12 cm and 4 m can be realized. The VEGAKON 66 is a conductive limit switch for conductive liquids. The instrument is suitable as full or empty detector in ...